Voice Memos older than last Sync date not copying from iPhone to PC after sync, even though "Include voice memos" is checked

I am trying to copy over my voice memos from my iPhone to my PC. I have "Include voice memos" checked under the Music tab.
I had an issue with voice memos being duplicated on my iPhone after a sync (I got two versions of each memo on my phone for some reason), so after deleting the extra copies on my phone I deleted all voice memos from within iTunes and chose the option to move the files to the Recycle Bin. So the Music\iTunes\Itunes Music\Voice Memos folder is empty, and there are no voice memos showing up in iTunes.
But now when I sync, it isn't copying over the older memos that are on my iPhone to my computer. If I record a new voice memo then that memo transfers successfully, but any voice memos with a recording date older than my last sync date do not transfer.
How can I get these older voice memos (with dates older than my last sync date) transferred over from my phone onto my PC?

Does anyone know of a way that I can access the voice memos with dates older than my last sync date...?

Similar Messages

  • Why do some videos not copy from iphone to pc?

    I don't understand why some videos will not copy from my iphone 4s to my pc (win xp) when I connect iphone usb to pc using "scanner and camera wizard"? Just some of them. It doesn't matter if its 2min or 2 sec long. Just randomly says it can't copy to my pc...
    why??
    Also can I avoid all this if I have icloud set up on both devices?
    I haven't tried because it seems that everywhere I have read and researched - icloud only pushes photos/photostream/camera roll (as well as documents, contacts, etc) But I am focused on home videos I have recorded on my iphone camera trying to get it off iphone and onto pc.
    Immediate response would be SOO appreciated!

    Yeah I considered that but I had so many photos & videos I attempted it this way. And I am getting some videos to copy to pc - juist not all...grrr thanks for the icloud info though,

  • Requested delivery date not copied from quote item to order item

    CRM 7.0 copying from a quote to an order is ot copying the requested date at the item or header.
    For  the Header we are using copying routine SLSHDR and for the item SALES
    There is a date profile assigned to both the quote & item category, these objects are in the date types.
    BILL_DATE                           Billing Date
    INVCR_DATE     Billing Document Created On
    OPP_DEL_DATE     Requested Delivery Date
    ORDERACTUAL     Actual Dates
    REQ_DLV_DATE     Rqstd Delivery Date Proposal - Order Hdr
    VALIDFROM                           Valid From
    VALIDTO                           Valid To
    This seems like it should not be so complicated, we are looking at a Badi for the copy rules but has been challenging to say the least.  It seems like there should be a way to configure (not code) this issue.

    SAP OSS stated functionality not supported, we pushed it back a couple of times.  Even though this is out of the box functionality in ECC copying a quote to an order.
    Our developer was able to code a solution in method IF_EX_CRM_COPY_BADI~DATES, our ecommerce app calls this function when the quote is converted to an order in ISA.

  • Data not coming from DOE to Mobile After defining Rule for device attribute

    Hi All,
    I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
    1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
    2. In CDS table i have all the records for all the work center.
    3. Now in RMM under customized , i have added an attribute named "Work_center".
    4. Now i defined a rule with Device attribute mapping and activated the rule.
    5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a   Work center to the attribute "Work_Center" .
    6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
    Is my approach is correct
    Regards,
    Abhishek

    Hi Abhishek,
    You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
    extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
    1. In the workbench click on the Data Object, and then right click and select "View Metadata".
    2. Select Distribution Model tab.
    3. Now select your DO's Association table.
    4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it 
        as "I"  and execute
    If there are any entries now in the AT table, and on triggering extract if they are not coming to the
    outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
    specified is not  the satifying.
    Thanks,
    Swarna
    Now if you have entries w

  • HT201269 Unsolicited 'notes' copying from iphone to iphone

    Two unconnected  iphone 4s (one with an apple id, one without) have, without being asked to, copied the contents of  notes from one to the other. How has this happened, and what can i do to prevent it.
    Thanks

    Something I just now remembered, I DO NOT have THE CLOUD on my iPhone because it has never been updated. Cloud is only on the iPad. Could that be why this happened?

  • HT1766 4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.

    4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Reports older than version 9 are not supported

    Hello,
    I tried to access crystal reports rpt files from java client application:
    reportClientDoc.open(filename,0);
    and I got the following error meassage as ReportSDKException:
    Reports older than version 9 are not supported.
    I am using the jar files of the here downloaded JRC pack as runtime libraries (actually in NetBeans IDE 7.2.1).
    I tried the followiing packs:
    crjava-runtime_12.2.217 : SAP Crystal Reports for Java Runtime Components - Java Reporting Component (JRC)
    and
    JRC 11.8
    giving similar error message.
    Is there any older pack available for download prior of Crystal Reports version 9 ?  I could not find for very long search.
    Or is there any other possibilty to access such RPT files from java? (Actually these file are generated by IBAK-IKAS Sewer Inspection Software).
    I suppose VisualStudio is a possibility (which version?), but java would be better for us on our operation system platform.
    thanks for any tip
    Marcell

    Ted,
    I am actually using your JSP page code from "Ensuring Report Cleanup" blog.
    All my reports have a date stamp of 2006-2009, so they are fairly recently.
    And they are 3rd party, not sure I can modify them (technically or legally)
    I tried to open several other reports (with more recent datestamp), and got exceptions like:
    Error
    Error finding JNDI name (CSGSQL_2K5) 
    What might be causing that and how to fix it?
    (I try to open it from file system, not RAS. Running JSP on Tomcat6. maybe some XML config file missing?)
    Does it mean that this report is not too old for CRViewer12, so we are one step further ?
    Also, how do I pass info to that report via JSP (DB connection, parameters, etc)?
    Any good documentation/books on working with CRViewer 12 with JSP ?
    I could only find books on how to use CR with .NET. 
    Sorry for the newbie questions, very new to CR.
    TIA,
    Oleg.

  • Searching for calendar items older than a specific date with search-mailbox and AQS

    I need to find the total size of all calendar items in a mailbox older than a specified date using PowerShell through the search-mailbox cmdlet's searchquery parameter.  My problem is that I cannot find a complete list of Calendar item properties to
    use in search queries.  The AQS page doesn't have a complete list of properties for a Calendar object.
    I'm using code from the ArchiveStatisticsPlanner.ps1 script as a base and the only date properties I know of are the sent and receive properties (see below.)  The basic start, end, date properties generate errors in the query.  How can I find all
    Calendar items older than say, 1/1/2013?
    Sample:
    $MBXSearch=Search-Mailbox-Identity$MBX-SearchQuery"kind:calendar
    sent:<=$QueryDate OR kind:calendar received:<=$QueryDate"-EstimateResultOnly-DoNotIncludeArchive

    huh, you a get response marked as answer that wasn't very helpful.
    EDIT: and now I'm reported as abusive.  Please don't tell the truth on these forums, it seems to be frowned upon
    I did that.
    If you're going to necro an answered thread and attempt to hijack it, you should have an actual answer that you feel is more relevant.
    All you did was complain and add zero useful information, thus earning an 'offtopic/irrelevant' notation.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Set restriction to get messages older than a specific date using EWS?

    Hi, I'm new working with EWS and I have found some code to set a restriction to help me filter messages "between" to dates, but I need to be able to obtain emails that are "older" than a specific date so I can delete them.  My application needs to be
    able to clean up a mailbox to only to keep up to so many days/weeks worth of emails.  The code I have to search for emails that works
    between dates is:
    public void SetDateRestriction(FindItemType findItemRequest)
    DateTime dateStart = DateTime.Now;
    DateTime dateEnd = DateTime.Today.AddDays(-180);
    PathToUnindexedFieldType dateSentPath = new PathToUnindexedFieldType();
    dateSentPath.FieldURI = UnindexedFieldURIType.itemDateTimeSent;
    IsGreaterThanOrEqualToType isGreaterThanOrEqual = new IsGreaterThanOrEqualToType();
    isGreaterThanOrEqual.Item = dateSentPath;
    FieldURIOrConstantType dateConstant = new FieldURIOrConstantType();
    ConstantValueType dateConstantValue = new ConstantValueType();
    //dateConstantValue.Value = string.Format("{0}-{1}-{2}T00:00:00Z", dateStart.Year.ToString(), dateStart.Month.ToString(), dateStart.Day.ToString());
    dateConstantValue.Value = dateStart.ToUniversalTime().ToString("yyyy-MM-ddT00:00:00Z");
    dateConstant.Item = dateConstantValue;
    isGreaterThanOrEqual.FieldURIOrConstant = dateConstant;
    // less than or equal to
    PathToUnindexedFieldType dateSentPath1 = new PathToUnindexedFieldType();
    dateSentPath1.FieldURI = UnindexedFieldURIType.itemDateTimeSent;
    IsLessThanOrEqualToType lessThanOrEqualTo = new IsLessThanOrEqualToType();
    lessThanOrEqualTo.Item = dateSentPath1;
    FieldURIOrConstantType dateConstant1 = new FieldURIOrConstantType();
    ConstantValueType dateConstantValue1 = new ConstantValueType();
    //dateConstantValue1.Value = string.Format("{0}-{1}-{2}T00:00:00Z", dateEnd.Year.ToString(), dateEnd.Month.ToString(), dateEnd.Day.ToString());
    dateConstantValue1.Value = dateEnd.ToUniversalTime().ToString("yyyy-MM-ddT00:00:00Z");
    dateConstant1.Item = dateConstantValue1;
    lessThanOrEqualTo.FieldURIOrConstant = dateConstant1;
    RestrictionType restriction = new RestrictionType();
    AndType andType = new AndType();
    andType.Items = new SearchExpressionType[] { lessThanOrEqualTo , isGreaterThanOrEqual };
    restriction.Item = andType;
    findItemRequest.Restriction = restriction;
    How can I modify this to give me emails older than a specific date?  Also any input on doing the deleting would also be greatly appreciated!
    Best Regards,
    Nelson

    Thank you very much Glen!  I can't believe it was that easy.  Works perfect.  I will work on the DeleteItemType.  I was also wondering if there was a way to detect if an email is an Out-of-Office (OOO) or Undeliverable message? 
    My app goes through all the emails and I need to skip any that are OOO or Undeliverable messages.  I've learned how to use the SearchFilter and I find that easier and more straight forward than setting the restrictions.  I'm also able to use a SearchFilter
    to get emails older than the specified date. 
    Here's my new code for reading unread emails using the SearchFilter and paging (for better efficiency). 
    1 - Is there anyway to tell the filter to get AllProperties without having to specify each one using ItemSchema or EmailMessageSchema?
    2- What is the difference between those two (any advantages over one or the other)?
    3 -Is there any reason to even be using the ExchangeServiceBinding here anymore since it seems the ExchangeService object is all I need?  In my old code, I was using the ExchangeService object to do an AutoDiscover and then using that to set the URL
    in the ExchangeServiceBinding.  What are the main to difference/uses for these to objects?  Sorry if that's a dumb question.
    private void GetUnReadEmails(string sMailboxName)
    // Create the binding to Exchange
    ExchangeServiceBinding esb = new ExchangeServiceBinding();
    esb.RequestServerVersionValue = new RequestServerVersion();
    //Console.WriteLine("Exchange version: " + esb.RequestServerVersionValue.Version);
    //esb.RequestServerVersionValue.Version = ExchangeVersionType.Exchange2007_SP1;
    ExchangeService service = GetBinding(sMailboxName);
    Console.WriteLine("Exchange version: " + service.RequestedServerVersion);
    esb.Url = service.Url.ToString();
    esb.Credentials = new NetworkCredential(Username, Password, Domain);
    Mailbox mb = new Mailbox(sMailboxName);
    FolderId fid1 = new FolderId(WellKnownFolderName.Inbox, mb); // where fid1 was WellKnownFolderName.Inbox
    //FindFoldersResults findResults = service.FindFolders(fid1, new FolderView(int.MaxValue));
    ItemView iv = new ItemView(50, 0);
    FindItemsResults<Item> findResults = null;
    PropertySet ivPropSet = new PropertySet(BasePropertySet.IdOnly);
    //SearchFilter ivSearchFilter = new SearchFilter.SearchFilterCollection(LogicalOperator.And, new SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, false), new SearchFilter.ContainsSubString(ItemSchema.Subject,"MSGID:"));
    SearchFilter searchFilter = new SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, false);
    iv.PropertySet = ivPropSet;
    do
    findResults = service.FindItems(fid1, searchFilter, iv);
    string sText = "";
    if(findResults.Items.Count > 0)
    //PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly) { EmailMessageSchema.Body };
    PropertySet itemPropSet = new PropertySet(BasePropertySet.IdOnly) {ItemSchema.Subject, ItemSchema.Body, ItemSchema.DateTimeReceived, ItemSchema.HasAttachments, ItemSchema.ItemClass};
    itemPropSet.RequestedBodyType = BodyType.Text;
    service.LoadPropertiesForItems(findResults.Items, itemPropSet);
    //service.LoadPropertiesForItems(findResults.Items, itItemPropSet);
    //service.LoadPropertiesForItems(findResults, new PropertySet(ItemSchema.Subject, ItemSchema.Body, ItemSchema.DateTimeReceived));
    Console.WriteLine("Total items: " + findResults.TotalCount);
    foreach (Item item in findResults.Items)
    Console.WriteLine("ItemID: " + item.Id.UniqueId);
    Console.WriteLine("Subject: " + item.Subject);
    Console.WriteLine("Received date: " + item.DateTimeReceived);
    Console.WriteLine("Body: " + item.Body);
    Console.WriteLine("Has attachments: " + item.HasAttachments);
    //Mark the email as read
    EmailMessage emEmail = EmailMessage.Bind(service, item.Id);
    //emEmail.Load();
    emEmail.IsRead = true;
    emEmail.Update(ConflictResolutionMode.AlwaysOverwrite);
    sText += "Subject: " + (item.Subject.Trim()) + " ";
    //sText += "DisplayTo: " + (item.DisplayTo.Trim()) + " ";
    sText += "DateTimeReceived: " + (item.DateTimeReceived.ToString()) + " ";
    sText += "ItemClass: " + (item.ItemClass.Trim()) + " ";
    sText += "\r\n";
    else
    sText = "No unread emails";
    Console.WriteLine("No unread emails");
    txtItems.Text = sText;
    iv.Offset += findResults.Items.Count;
    } while (findResults.MoreAvailable == true);
    Thanks again for your time.  I appreciate it.
    Nelson

  • Update Date is older than the Creation Date

    Hi Team,
    In the Oracle Application 11i forms we are seeing the Update Date is older than the Creation Date?
    But the creation date should be older then the updated date.
    Thanks,

    What 11i release are you on?
    Can you please elaborate more on the Creation/Update dates mentioned above? Are you referring to forms or tables or specific rows? Is this happening to all data/forms? Please provide an example for us to understand your issue.
    Thanks,
    Hussein

  • I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

    I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
    At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

  • I updated my IOS on my iPhone 4S and it locked up.  I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored.  How do I get iTunes to go past this screen so I can sync my phone again?

    I updated my IOS on my iPhone 4S and it locked up.  I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored.  How do I get iTunes to go past this screen so I can sync my phone again?

    Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the  go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first

  • Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

    Hello,
    I am facing following issue regarding web analytic service for specific date 2014-08-18:
    Verified following services which are running and status was success on that specific date 2014-08-18 :
    Web Analytics Service
    Microsoft Usage Data Import
    Microsoft SharePoint Foundation Usage Data Processing
    Observed latest Web Analytics Setting as below :
    LastAggregationDateId 
    20140817 -   The date id of the last successfully completed data aggregation
    LastAggregationTime
    2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
    LastBestBetSuggestionAggregationDateId
    20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
    LastDataCopyTime
    2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
    Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
    In order to verify the same I have checked as follow:
    SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
    WHERE  [DateId] = 20140818
    Above SQL Query has returned ZERO value.
    Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
    Your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    The image itself has the answer
    The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
    The Web Analytics service logs this in the “.usage” files.
    A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
    Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
    The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
    Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
    This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
    Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
    Regards Chen V [MCTS SharePoint 2010]

  • HT1386 There are songs in my library that do not show up on the device after syncing

    There are songs in my library that do not show up on my ipod after syncing.
    Why would this happen ?

    Do they play in iTunes on the computer?
    Are they from a different source or format that the ones that do sync?

  • I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

    I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

    The iphone is not  storage/backup device.
    The sync is one way - computer to iphone.
    The only exception is itunes purchases.  File>Devices>Transfer Purchases
    You should copy everything from your old computer, or your backup copy of your old computer, to your new one.

Maybe you are looking for