Voice message are not available

I see voice messages come up in Skype and I clikc on them and they go light blue and say "This voice message currently unavailable." Can someone please tell me why this happens. Also why they don't seem to come back ? Thanks

I'm running the latest version of Skype on Yosemite and it just recently killed ALL of my previous voice mails. I'm paying for a service that doesn't even provide tech support, just a community so we can all share how screwed over Microsoft's Skype has made is. Wanted to avoid GoogleVoice as the lesser of two evils but I need access to my voice mail, obviously. UNACCEPTABLE.

Similar Messages

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

When I try to use the editor in Joomla, I get the message that cut & paste are not available.

Hi -- I'm using Joomla to develop a website. When I try to use the editor, I get the message that cut & paste are not available. I am directed to instructions to edit the user.js file. I found the file in xhpnmg5i.default and then inserted the various 'user_pref' lines as instructed changing the site name to "http://localhost". This made no difference whatsoever so I downloaded an add on called allow clipboard helper. Looks great but how do you use it? There's nowhere on the screen that allows you to start the program. I've spend most of the day trying to do something that I'm surprised an open source program doesn't just let me do. HELP

Uninstall the program then download and reinstall - activate with the serial number from your Amazon purchase.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

I am getting a message that "my podcasts are not available at this time" Second day this has happened, i have synced phone many times. what is going on?

I am getting a message on my iphone 5 for the last two days saying that " my podcasts are not available at this time"-any ideas of what this could mean? I have synced phone many times. Is it itunes? My carrier?
thanks

I just figured out a solution. I connected my ipod to my computer, went to the 'info' tab on the menu for my ipod. I checked 'Sync Mail Accounts', which were greyed out until I selected them. That connected me to the Cloud and everything went back to normal. Hope this helps someone else!

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

TF400893: Team Foundation Server services are not available.

Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
Regards

Hi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

IMessage voice message is not active in iOS8

I am using an iPhone 6 and have read the previous question entitled "iMessage voice message is not active in iOS8" and applied the suggestions but it has not corrected my problem. I made sure iMessage was turned on in my settings/Messages. I made sure my called phone number was also an iPhone 6 with the same iMessage turned on in similar fashion. Both phones are identified as iPhones in contacts with the phone numbers but I don't believe that has anything to do with the issue cause it sometimes works fine with phones defined as mobile. I am current on IOS8.02.

Thanks for your information. That really gives me some hints to figure out what's going on of my iMessage.
OK, here is my trial test after all the replied suggestions above.
(1) It seems the voice/video memo function will be ONLY enabled automatically when sender and receiver are all iPhone(iMessage app) users.
(2) In my case, if I choose a receiver who is a iPhone user too, then the voice/video memo function button is working nicely.
(3) The receiver doesn't need to run iOS 8. I have tried iOS 6 iOS 7 friends, there is no problems at all.
(4) In conclusion, you have to find another iPhone user to experience new function just like the same requirement of Facetime.
Problem solved , I hope my question could help other confused user as well.

Determination of batch whose stocks are not available in system

Hi SAPgurus,
During batch determination , the system is determining a batch whose stocks are not available in system .(The stocks of that batch has been received and has been sold out 1 week back , In MMBE also the stocks of that batch is nil and another batch is available) .
One imp thing to note that after determination , system is giving error message while performing PGI.But the question is why it is determining at all.
Thanks in advance,
Jignesh

Kindly check the Storage Location against that Material & Plant as might be stock is available with that Batch in some different Storage Location.
Best Regards,
Ankur

Entries in rsrd_log are not available in sm37

Hi all,
I have some "yellow" logs for sending workbooks in the rsrd_log with the message User cannot be used for background processing. But now the user can be used.......
Now I want to repeat scheduling in the sm37, but the "yellow" jobs are not available.
I hope you can help me
Kind regards
Peter

Hi,
Pls refer the below links.
http://www.tnsr.eu/fileadmin/user_upload/Documenten/PDF/How_To/How_To...Troubleshoot_Information_Broadcasting.pdf
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00738f64-ff95-2b10-0eb1-dfe8859e5bf5
Hope it helps you,
Regards,
Ravindra.

Lion IMAP account - Sent messages are not sync

Hi all,
this question is not strictly related to Lion, as this "problem" sussist even in the old Leopard, however I was believing it woul have been fixed with the new version.
I've my Mac Book Pro with all my email configured as IMAP.
This is great, I see my Inbox with the same exact copy of the message available online. When I send a message, this is stored in the sent mailbox, and this is great too.
But why all the old messages are not seen in the sent mailbox as well?
It doesn't make sense to me, and there is any option that make a difference. I was initially believing the "keep a local copy of the message" was affecting this.
But the most frustrating thing is that at the very bottom of the left aside there is a second entry, one for each account, which essentially show me a sort of "raw" account with all the folders and labelled messages as the online structure. Is it possible to get rid of that too?
Many thanks
Andrea

I've had the same problem for a while, even before Leopard. It definitely occurs more often when sending bigger messages (i.e. with attachments), and on slower connections (cell card, or even shaky wifi). Always unsettling when I notice it, and seriously frustrating when a Send fails and I've forgotten to Save as Draft.

One or more Fonts are not available

I have seen this problem on this and other forums in the past
but I have never seen a response that made sense or lead to a fix:
I created a flash file a few months ago. It uses a font called
"microgramma". I now want to make some changes to it and I get this
message:
"One or more fonts used by this movie are not available."
etc...
The font is a truType font, works fine in every other
application on my machine, but now for some reason, Flash doesn't
see it. This is not the first time this has happened to me. It
would be great if Adobe would address this.
Flash CS3 on a MAC ppc with OSX 10.4.11

You should be able to get this to work. (btw - mac guy :) Is
the Font listed in the Flash 'Library' panel, or are you refering
to the main Font menu, and embedding? I'm uncertain, and perhaps
I'm mistaken.
You can create a Font 'file' the resides in the FLA Library.
Have you tried using the small icon in the upper right corner of
the 'Library' panel, and selecting 'new Font...'? this should
create a complete Font package?

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

PPTP "MPPE required, but keys are not available"

Dear all
Since last reboot of my server I got following errormessage in VPN Logfile when user tries to connect to the server trough PPTP:
MPPE required, but keys are not available. Possible plugin problem?
Anyone have an idea, what could be wrong ?
May as another information: After restart of the server I had problem, that VPN Server was not started, because the L2TP definitions where not correct... Logfile told me. So I have redefined the PPTP and L2TP setting, but disabled the L2TP login, because I have definied this "only" for test purposes. All definitions where made with Server Administrator.
Before restart of Server Login trough PPTP was working quite well...
I forgott to say, that the Server (Leopard 10.5.1) is an OD Master, which is working quite well (until now). The authentication type for PPTP is set to MS-CHAP (Kerberos is grayed out, I don't know why)
Cheers Daniel
Message was edited by: Daniel Lang

Here I have now some logfiles from vpnd... may this helps to see the problem I have overseen:
Wed Dec 12 02:21:21 2007 : Directory Services Authentication plugin initialized
Wed Dec 12 02:21:21 2007 : Directory Services Authorization plugin initialized
Wed Dec 12 02:21:21 2007 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Wed Dec 12 02:21:21 2007 : PPTP connection established.
Wed Dec 12 02:21:21 2007 : using link 0
Wed Dec 12 02:21:21 2007 : Using interface ppp0
Wed Dec 12 02:21:21 2007 : Connect: ppp0 <--> socket[34:17]
Wed Dec 12 02:21:21 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp> <callback CBCP>]
Wed Dec 12 02:21:21 2007 : lcp_reqci: rcvd unknown option 13
Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFREJ.
Wed Dec 12 02:21:21 2007 : sent [LCP ConfRej id=0x0 <callback CBCP>]
Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFACK.
Wed Dec 12 02:21:21 2007 : sent [LCP ConfAck id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : sent [LCP EchoReq id=0x0 magic=0x5045e9f1]
Wed Dec 12 02:21:24 2007 : sent [CHAP Challenge id=0x82 <ea8c6372a227309685ab6c0a36d64aec>, name = "server.anywhere.com"]
Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x2 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x2 0c 02 00 12 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x3 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x3 0c 03 00 15 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
Wed Dec 12 02:21:24 2007 : rcvd [LCP EchoRep id=0x0 magic=0xfb9005f]
Wed Dec 12 02:21:24 2007 : rcvd [CHAP Response id=0x82 <41....0>, name = "testuser"]
Wed Dec 12 02:21:24 2007 : DSAuth plugin: Could not retrieve key agent account information.
Wed Dec 12 02:21:24 2007 : sent [CHAP Success id=0x82 "S=4020C83B....A M=Access granted"]
Wed Dec 12 02:21:24 2007 : CHAP peer authentication succeeded for testuser
Wed Dec 12 02:21:24 2007 : DSAccessControl plugin: User 'testuser' authorized for access
Wed Dec 12 02:21:24 2007 : MPPE required, but keys are not available. Possible plugin problem?
Wed Dec 12 02:21:24 2007 : sent [LCP TermReq id=0x4 "MPPE required but not available"]
Wed Dec 12 02:21:24 2007 : rcvd [CCP ConfReq id=0x4 <mppe +H +M +S +L -D +C>]
Wed Dec 12 02:21:24 2007 : rcvd [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins1 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins3 0.0.0.0>]
Wed Dec 12 02:21:24 2007 : rcvd [LCP TermAck id=0x4 "MPPE required but not available"]
Wed Dec 12 02:21:24 2007 : Connection terminated.
Wed Dec 12 02:21:24 2007 : Connect time 0.1 minutes.
Wed Dec 12 02:21:24 2007 : Sent 0 bytes, received 0 bytes.
Wed Dec 12 02:21:25 2007 : PPTP disconnecting...
Wed Dec 12 02:21:25 2007 : PPTP disconnected
2007-12-12 02:21:25 CET --> Client with address = 192.168.yyy.yyy has hungup

Re: 13 in. MBP 2012 OS X Mavericks Maps (DIRECTIONS are not available)

Iam in Dubai UAE, i have 13 in MBP 2012 with OS X Mavericks.
I cannot get directions in using the app MAPS?
What do i need to do on my mac?
Is anybody experiencing the same error i get on getting directions using the MAPS in Mavericks?

my same problem (re-post quote)
need your response guys..iam using MBP 13 in 2012 2.5 Ghz 8Gb RAM INTEL HD4000 500Gb Hard Drive.
iam currently in DUBAI, UAE
Hi i would like to get an answer from these community,as iam having an error message like these below:
Although i have clearly specified a start and end location.
Directions are not available.
A route to the nearest road cannot be determined.
# I would like to have an answer from the above issue i have.

Voice message are not available

Similar Messages

Maybe you are looking for