Voice messages are no longer sent? to the iPhone (nor notification)

iPhone 3G running iOS 4.0.2
I don't know how long this has been happening, but I am not able to get my voice mails without calling the mailbox (i.e. dialing myself from the iPhone). It also did not display missed calls either (no red circle number on phone app); however, upon doing a "Reset Network Settings", I get the notice of missed calls now but still no voice messages on the phone.
Apologies if this if covered elsewhere, but 30 minutes of searching on the forums led me nowhere as my keywords are all keywords for 100 different problems/topics.

If store sent messages on the server is not selected under the Mailbox Behaviors tab for the account preferences, quit Mail first and using the Finder go to Home > Library > Mail > Mailboxes > Sent Messages (name of your IMAP account in parenthesis).mbox.
Confirm there is only one Sent Messages.mbox folder for this account in the Mailboxes folder.
If so, move this mailbox folder to the Desktop.
Launch Mail and a new Sent Messages.mbox folder for the account will be created automatically by Mail within the Mailboxes folder when sending the next message with the account. Send a test message to yourself to confirm if the sent message is available within the account's Sent mailbox under Sent in the mailboxes drawer.
If so, you can use the Import Mailboxes feature to import the old Sent Messages.mbox for this account moved to the Desktop.

Similar Messages

  • I shattered the screen of my iphone 4 and switched to the iphone 3 and some of my text messages are still being sent to my iphone 4 even thought i switched them. What do i do?

    i shattered the screen of my iphone 4 and i switched my line back over to the iphone 3 and some of my text messages are still being sent to my old phone. What do i do?

    Are the messages being sent text messages or iMessages?

  • Messages are no longer sent

    I've suddenly got this problem where messages are not sent - they just go to my Outbox and stay there. Mail then says that these will be sent later, but they never go.
    I've not altered any settings and I can sent mail from another computer, so It's not my router or ISP.
    Any ideas?

    Kevin,
    This is sounding like an issue with MTU (maximum transmission unit), and could require setting to new, lower values in the Mac and PC. Because the laptop is wireless it does not come into play. Another thing to check, is whether there are any Firmware updates needed for you Dlink router. While bad cables from the router to the computer could also impact this, since you have two computers cabled to the router it is unlikely that both are bad.
    The ability to send without attachments, but not with attachments is often MTU; however, if not using the SMTP of you ISP, then bad relaying from another SMTP can look like this.
    See the KB article linked below for how to change on the Mac (and test with values lower than 1500 for MTU -- start with 1492, and decrement by a 100 for testing:
    http://docs.info.apple.com/article.html?artnum=107962
    The articles linked below speak of MTU, and Dlink routers, and may be helpful:
    http://www.dslreports.com/faq/7121
    and
    http://support.dlink.com/faq/view.asp?prod_id=997&question=General-Routers
    All the best, and keep us posted.
    Ernie

  • Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

    Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

    Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

  • Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device

    Hi 
    I just got this message yesterday: Your Emitac Mobile Solutions LLC email service is deactivated, Email messages are no longer being sent to your Blackberry device. 
    And since then, i havent being able to set up more than one email and i subscribed for 4. 
    I have rebooted\,, sent service books and hard set the phone so many times.
    What should i do?
    Thank you

    Hi and Welcome to the Community!
    From your post, I cannot quite tell if you did all of this, in exactly this way. Hence, with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

    what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

        Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.

    I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.
    I've tried resetting my phone, looking for the pics in the new 'deleted' folder. I tried forwarding the jpegs to sees if they'll appear in a new message (but turnout the phone won't let me forward these pics). Apple is trying to say it's the 30 day reason, but I know that is not the problem. ALl of my pics older than 30 days were viewable. It is the upgrade that screwed this up. Help! Important pics!

    Try this to learn about using keys:
    http://www.apple.com/support/macbasics/
    You can also use your PC mouse.
    As for iPhoto, it sounds like you were trying to move files around in the library. That is a bib no-no in Aperture or iPhoto.

  • I have problem when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

    I have problem with my ipad ,  when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

    Not very helpful but I have the same issue. Plugging in and doing the update via. iTunes will probably work but I find that whole experience annoying (downloading apps not on the Mac, etc..)

  • TS3274 I am trying to do a software update on my ipad third generation...even though i am connected to the internet, i get a message saying "iso 6 failed verification because you are no longer connected to the internet"

    I am trying to update my software on my ipad 3rd generation...Even though I am connected to the internet, I get and error message saying, "iso 6 failed verification because you are no longer connected to the internet"  Can anyone help?

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • My iPad mini iOS version is 6.0.2  I can't upgrade to iOS 7.  Message displayed is "Verification of update failed because you are no longer connected to the internet."  This happens while I am connected to the internet.  What should I do?

    My iPad mini iOS version is 6.0.2 which I can't upgrade to iOS 7.  Message displayed during verifying upgrade is "Can't verify upgrade because you are no longer connected to the internet". This happens again and again though I am connected to the internet through wifi.  What should I do?

    Reset the iPad and try again. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Reset your router and try again. Unplug your router from power for about 30 seconds then plug it in again.
    Try another WiFi Network. Go to a friend's house, a library, anywhere else that you can use a trusted WiFi network.
    Try updating using iTunes on your computer.

  • I get a message IOS 6.1.2 failed verification because you are no longer connected to the internet .  i checked my connection to internet and its fine for mail and all other internet use only keep getting nowhere fast.

    i get a message IOS 6.1.2 failed verification because you are no longer connected to the internet .  i checked my connection to internet and its fine for mail and all other internet use only keep getting nowhere fast

    Just Power off your Iphone wait for 10 seconds and then power on again and got to settings and software update it will download the update once again and it will work fine.

  • I am trying to update iso 7.0 and get the following message; iso 7.0 failed verification because you are no longer connected to the Internet . But I am???

    I am trying to update iso 7.0 and get the following message; iso 7.0 failed verification because you are no longer connected to the Internet . But I am???

    Hey NinaChall,
    Thanks for the question. I understand you are experiencing issues updating to iOS 7. It may be best to complete the update utilizing iTunes:
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Update your device using iTunes
    1. Ensure that you're using the latest version of iTunes.
    2. Connect your device to your computer using the included USB cable.
    3. After iTunes opens, select your device when it appears in iTunes under Devices.
    4. Click "Check for Update" in the Summary pane to check for available updates.
    5. If an update is available, iTunes prompts you to download and install the update. Do not disconnect your device until the update has finished.
    Thanks,
    Matt M.

  • [svn:fx-trunk] 10459: Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking , etc.

    Revision: 10459
    Author:   [email protected]
    Date:     2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
    Log Message:
    Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
    Improving revision 10199 a bit, to allow for single line comments.
    QE notes: None
    Doc notes: None
    Bugs: SDK-22027
    Reviewer: Paul
    Tests run: Checking, Compiler cyclones
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22027
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Some objects are no longer available in the universe.(Error: WIS 00001)

    We are in the process of upgrading BOXI R2 to R3.1 SP3. Setup, configuration of BOXI R3 on new machine is done. And migrated the reports,  universes, users, groups and all repository objects with Import Wizard. everything seems good except few Webi reports pointing to wrong universes and getting the below error message.
    "Some objects are no longer available in the universe. See your Business Objects administrator. (Error: WIS 00001)"
    1) I deleted the particular report from destination and re imported it but still same issue.
    2) deleted the file from Input file store and re imported it still same error I'm getting.
    Gurus, Please help me..
    Thanks,

    if the issues is with one or two reports i would've tried manually editing each report, but here we've this issue with 20+ reports so far..
    Just pointing it to right universe won't work, I've to add the missing objects as well. So Its like developing new report.
    Thanks!

  • Internal hard drives are no longer appearing in the finder window

    Hi everyone,
    I'm a new macbook pro user and just noticed that my internal hard drives are no longer appearing in the sidebar of my Finder window.  I have searched this issue and checked that the correct preferences are selected, never received any error messages and run Disk Utility and everything seems ok......except I still can't figure out why my devices aren't showing up!!
    Any help with this is much appreciated!

    FINDER PREFERENCES>SIDEBAR>EXTERNAL DISKS has the box checked?
    Does the HDD icon appear on the desktop?
    Does the HDD get recognized in Disk Utility?
    I'm just trying to verify what your situation is.
    Ciao.

Maybe you are looking for

  • Photo is placed in the wrong geographical location

    my computer has assigned photos to places that are incorrect. Some photos were taken in a different town then what town it is listed in, can I move the photos or re tag them with the correct City or town?

  • How do I sync all my icloud accounts onto one, more specifically I'm trying to access all my music from all my devices

    I have multiple Apple devices, Desktops, laptops, iPad, iPhones, etc.  I somehow was able to sync the desktop at my vacation home with iColoud where I stored not only all the music I purchased through iTunes, but my entire CD collection.  I have sinc

  • Update- statement in JDBC sender Adapter

    Hi , I have a requirement where I am trying to fetch data from ODS based on some flag and immediately I want to update the flag status . So I used selected and update in JDBC sender adapter . But I have one question , in the small timeframe where  XI

  • ITunes 11.1.1 SONG Count is WRONG!

    Hi, The title says it all. However a bit more background detail. I'm running 10.8.5 on 2.3ghz, iCore 7 with 8gb of DDR3 with Terabyte storage. Yes the system has been updated, yes i am running the latest iTunes, and YES I have diligently applied all

  • [SOLVED] File name encoding issue

    Hi all, I have a large series of files with accented characters, they were all displayed nicely, but at some point, when I copied them to another computer, the characters were replaced by codes, for instance: "ó" --> "ó". +Renaming ie. "Pasó" (bad