Voice Over gesture for next page

Hi All,
does anyone no the Voice Over gesture for next page in apps like ABC news
Thanks Beau

Have you tried to flick with three fingers?
enjoy your magic machine

Similar Messages

Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

Pages '09 v4.1
Problem 1:
     I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
     However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
     On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
     Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
Problem 2:
     Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
So there you have it. Christmas is over and its back to work. Thank-you for your attention.

Regards re-positioning a table:
I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before - the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
Page 1 left side.
TEXT 1-line as 1-column
TABLE (5-rows)
TEXT (2-columns) 14-lines left column and 13-lines right column.
[Layout Break] otherwise the above textual columns would be all on the left side of the page.
TEXT 1-line as 1-column
* The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
Page 2 right side.
A 2-page table flowing or breaking into a 3rd page.
Page 3 left side.
The overflow of the subject table.
[Layout Break]
[Section Break]
Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

My ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?

my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanks

This document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button.

Issue with voice over narration for a presentation

When I record a voice over narration (Keynote 09) and then play back - the slides do not always play back with the sound. It seems to be an issue with slides using a build-up ... although it finishes - it then sticks and the sound for the next slide carries on out of sync to the visual - EG - every time I try it happens on the same slides - A good example is one that is followed by a .mov built into a slide. The sound track runs before the new slide image appears - Also I have problems with the movie - as the sound from the .mov file does not come through, so I have to record the movie sound on the narration rack .. confused!?

It sounds like you are making too many assumptions and not actually testing anything.
For instance, emoji may not cause issues for other contacts (maybe it is and you don't know it) but if I were testing this issue, the first thing I would do is remove the emoji from the contact info.
Next thing I would do is make a fake contact called "Home Other". And see if the Voice Control asks you to pick between Home and Home Other
Another thing I would do is add multiple numbers for your home contact (real or fake) And see if you can get the Voice control to find the contact and ask you what number you want to pick. (home or mobile)
And last thought that I had....You mentioned that the Voice Control dials a random person every time, but how random is it really? Are you sure that part of these people's names don't phonetically sound similar to the word Home?

Scanning multiple pages - pop-up for "Next Page" appears

I'm running Acrobat Profession version 7 on OS X 10.5.
My scanner is an Epson Perfection 3170 with an automatic document
feeder.
The settings for scanning seem to have been goofed up -- any
assistance in resetting them would be appreciated.
Previously, I could drop a handful of pages into the feeder, choose
FILE => CREATE PDF => FROM SCANNER in Acrobat, set the scanner to ADF
(automatic document feeder), and it would create a single PDF from the
whole stack.
Now, the first page scans, the second page feeds through without
scanning, and then I get a pop-up called "Acrobat Scan". It says,
"Next Page" and "Front of Sheet 2" is selected (no other options) --
and I can choose DONE or NEXT.
If I choose NEXT, it scans the next page (and then skips another page).
When I choose DONE, it goes back to Acrobat and the PDF is created.
(Obviously, every other page in the document is missing.)
It never did this before, and it's kind of pointless having an
automated feeder if I have to stop after every page.
A few points:
- reinstalling the Epson software did not help
- I notice that I get a separate pop-up the first time the scanner dialog opens -- this pop-up allows me to choose a scanner (only one is currently installed). Don't remember getting this before the problem started.
- I have another program that uses the same scanner -- it continues to scan multiple pages without interruption. Ergo, I assume this is an Acrobat issue.
Any suggestions on fixing this issue would be appreciated.
Thanks! -c

Thanks, Brian!
I've tried turning the scanner off/on, both after the computer is booted and when it's shut off.
Between the need to select "Next Paqe" all the time, and the fact that the scanner skips every other page, I'm really annoyed!
Does anyone have any other suggestions on where I might find a solution? I considered contacting Adobe, but their per-incident support seems kind of expensive.
Thnx! -c

Print out multiple copies for next page in sapscript

Hi All,
For check printing the client wants the next page with item data to be printed out twice, while the first page along with the check will be printed out on a pre-printed paper. Can anyone advice me on this.

hi,
IF &PAGE& EQ 1
"do write what all you need to print in First page
ELSE
"write what all necessary you want to print from second page onwards..By this first page will not print in Second Page
ENDIF.
IF &NEXTPAGE& EQ 0
"This Means it is last Page write footer or any comments in Last Page
ENDIF.
Prabhudas

Voice over monitor for FCPX sounds awful

I'm trying to voice over a project right now and the monitor for the input out from FCPX sounds like it has an echo and makes your voice sound higher pitched. Is there any one else out there having the same problem? Its really annoying and my VO talent doesn't want to listen to his voice sounding like that for an hour and a half.

First, you don't really have to monitor yourself while recording. I never do. Second, you have to use headphones, or your mic will pick up the audio monitors and feedback. Here are three articles to help out.
Covers hardware & software setups, recording techniques, etc.
http://www.fcproxuniversity.com/FCPro_X_University/Blog_Archive/Entries/2011/9/2 2_Voice_Over_Work_In_Final_Cut_Pro_X.0.1_2_%28and_some_recording_tricks%29update d_11_11_12.html
Covers editing short VO work.
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-short-takes
Covers editing long VO work.
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-long-projects

Voice Over Blutooth for Piconet

Hi i am sanjana 21 f india
am in the verge of doing a project related to J2ME and bluetooth...
the specs are like we know we can do a voice over commn between two bluetooth enabled phones thats great but that will be limited to 20-30 meters am thinking of extending this to much greater like 100-150 meters
Think where there is a set of trusted phones like 6 phones in an office environment my idea is if no 1 needs to talk to no 6 let the other intermediate phones do the packet delivering work from 1 to 6 , for experimental purpose let the voice quality be low. For my project i would like to establish this concept for at least 3 phones and extend the distance between to say 40 metres ...
plz do help me regarding this whether this can be achievable and if god has given u some time slotted for me Smiley)

Have you tried to flick with three fingers?
enjoy your magic machine

Can I use voice over just for notifications?

i Want to use voice over but just so I can hear my notifications and messages read to me as they come in. But nothing else. Is it possible. ?

Forgive me as I did this a while ago, but heres how I remember it happening:
1. I wiped it
2. I selected "Set up as New iPhone"
3. It registered
4. It was activated, and was an iPod Touch basically
5. I sold it, so I can't try it. I now use Verizon, so no SIM, although I do have an original iPhone (retired), but can't find my old SIM.

HT1926 Can you take direct link to download Voice Over kit for my iPod?

I can`t download Voice Over from iTunes, I really need direct link. Thanks.

I`am sorry. my English is bad.
Мне нужно найти прямую ссылку на Voice Over Kit, т.к. мой компьютер отказывается загружать это дополнение через iTunes. Будьте добры, подскажите как её найти

Repeating frame over flow into next page

I have a report, on the first page of which I have a repeating frame. On the second I have only different paras of text.
When ever the repeating frame on the first page, returns data more than it can fit on the first page, it is getting printed on the second page. But as a result the text of the second page is being pushed down.
It also creates a gap between the place where the repeating frame data ends and the text of the second page starts. How to avoid this gap.
What is the solution . Please share.

Hi Nag,
Thanx for your question.
1. As you know its difficult to simulate the problem
through a sample report. I would like to know
which version of reports are you using?.
2. I suggest to surround your second repeating frame and the last paragrphs with a normal variable frame.
I mean include the second repeating frame and the last group frame into a variable frame that spans over the two pages. then you should set the "print object on" to "first page" and to "enclosing object"
for all parent frames.
3. if it does not work .Try this one too: To avoid the gap use "Anchor", anchor the last paragraphs frame to the second repeating frame by minimizing the gap between them(See help online about anchoring).
Hope this helps,
CB

How to I achieve great voice over audio for a macbook pro

Should I just plug in a mic? Do I need a external soundcard like the "apogee one" or is a USB mic a better solution?
I also play the guitar so maby one day I would like to record some guitar to, but in logic or similar.

Any mic, a quiet room and a good working knowledge of EQ. [The very best of the Logic plugins/"inserts" are in FCPX, btw.] If you don't have a quiet place (like me) then the very best -- BAR NONE -- noise reduction is in ScreenFlow - just take the default setting (80%). It's amazing - no "granular electronic" sound on the edges of quiet and sound like you get in just about everything else.
That said: Zoom mics are really quite good. Inexpensive (H1), portable, and can be used as a USB audio interface (mic and other sources). The S/N is incredibly high - there is no detectable noise in the recording at all - quiet is DEAD quiet. The H1 (as well as the H2 and H4) has an extra audio input so you can actually use any other mic you like as the recording source, like... a Shure SM-58 (with XLR to 1/8 inch stereo connector). This particular Shure mic is one of the most popular in the world for all kinds of applications (talk radio, singers, etc...). It will make you sound like "THE VOICE". And the H1 makes the Shure *very portable*. The Zoom mics will also accept Line level input, so you can record from your computer, a CD player, etc...
If you have an acoustic guitar, the H1 + a lavalier mic (Audio-Technica ATR-3350 for instance) clipped to the soundhole (so the mic is inside) sounds unexpectedly good — you decide: http://sight-creations.com/prv/audio/improv_030612_03.mp3 [production notes: strictly an improvised piece (not very good - but doesn't violate anyone's copyright; I was playing with and feeling out a new partial capo); "finished" in Logic with Space Designer>Medium Spaces>Nice Hall (toned down) + Adaptive Limiter (as a signal booster); no noise reduction used whatsoever, and the original source recorded outside on a breezy day with occasional traffic (none of which you will hear!)... I recorded at a lower level to keep extraneous noise out and since the S/N is so high, I can boost the signal in post without adding any unwanted hiss.]
[**I'm not fishing for comments about the music here, I'd rather not hear about it! ... just demo'ing a setup.]

What voice over microphone for Imac & FCE?

What is a good microphome for using on the Imac & FCE?

Almost any decent XLR-based microphone will work. Two of the long time standards are the Shure SM58 and SM57. You can find them for around $99 new and around $50 used on eBay. With one of these mics you will need an adapter (or adapter cable) to go from the mic's XLR connector the the Mac's 3.5mm stereo male connector.
Another mic that has seemed to work well is the Blue Snowball, which is a USB mic (as opposed to analog mics like the SM58 and SM57)
Assuming your use is for voiceovers, just look for a mic that is designed for voice, not instruments or percussion. Look for a cardioid, dynamic mic designed for voice. There are lots of them on the market - Shure, Audio Technica, Behringer, M-Audio, Sennheiser, many others.

Pages '11 and voice over on snow leopard?

I am a dyslexic user of mac. I use voice over and am using pages rather than MS word for mac as this means I can use speak as I type. However, if I am typing into a table in pages speak as I type does not work. Anyone know how to fix this?

I just wish to say that at this time there is no product named Pages '11.
The last issue available is Pages '09 !
Yvan KOENIG (VALLAURIS, France) mercredi 18 mai 2011 20:36:29
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Shortcuts for previous/next page on german keyboard are unreliable

Hi there!
I'm struggeling with the previous/next page shortcut on my german MacBook Pro. When I open the "History" menu it says the command for "next page" is ⌘ + ] and "previous page" is ⌘ + [
But there are no such bracket keys on the german keyboard. To get those brackets I have to press Alt + 5 or Alt + 6. So I tried ⌘ + Leftarrow and ⌘ + Rightarrow, but those are kind of unreliable... Sometimes the arrow shortcuts work, sometimes they don't...
Is there any way to manually change the shortcut or is there an alternative shortcut hidden somewhere?
Cheers

I don't believe there is.

Voice Over gesture for next page

Similar Messages

Maybe you are looking for