Voice Over problems

I was stupid to activate the voice over function on my iPad3. In made my software react strange and finally I was locked out. When I tried to log in again using the passcode, the passcode no longer identified my input as digit and it keeps denying me access to my iPad. Voice Over requires you to tap twice. If I tap once in the passcode there is no entry. If I tap twice there is an entry but it doesnt match what I tap. Can anyone help with this?

You need to tap once to select the field (it should then get a box around it) and then double-tap tap activate/type it - so for example to type a '0' you need to tap the '0' to select it and then double-tap it to type it. You also need to use 3 fingers to scroll around screens.
You can also turn VoiceOver off by connecting the iPad to your computer's iTunes : http://support.apple.com/kb/HT4064 (though you may need to type in your passcode on the iPad first)

Similar Messages

FCP - Voice Over problem

I have a FCP system set up which includes an AJA Kona LHe card. Audio inputs are via the AJA. This includes audio from a video deck as well as other audio inputs, such as a studio condenser mic connected for voice overs. I monitor the output from FCP through the AJA card via a Samson C-Control (monitor matrix). Here's my big problem. When I'm recording voice over, whilst there is definitely an audio feed being routed to the headphones (I am able to hear the audio cue countdown), I am unable to monitor the sound from the microphone through the headphones (or speakers for that matter). The microphone is working fine... when it comes to playing back the voice over through the headphones (or speakers), I can hear the track absolutely fine. I cannot understand why this should be. Has anyone experienced the same problem... and do you know how to solve it? HELP!.... Thank you.

Thanks for responding. Where do I find the checkbox that allows playthrough? What's it called... and which menu is it in? Thanks

Premiere Pro Voice Over Problems

Hello
I am having problems recording a voice over in PP6.
I am using an external mic via a mic amp and into the line in socket on my mac.
The problem is I can't set any levels as there is nothing showing on the level meter.
I can actually record the VO no problem but need to see and preview the mic level before I start.
Any help appreciated
Paul

To add to this post...now when I record my Voice overs, when you playback in the timeline they are running at twice the speed and other times they are very distorted...
Not sure what's going on here !

IOS7 voice over problems, skipping elements

I am using voice over in my application, I build my application in iOS6 in iPhone and ipad, it is working fine whereas when i run my application in devices which supports iOS7, voice over is behaving weirdly, It is skipping some elements like button text and labels etc.,
I have gone through the similar questions in apple communties and could not found any solution for this. Please help.

Maybe you should do a new compilation with the new XCode.
Anyway, you should post in the developer forum. You won't get help here.

Voice over and blackmagic

hello I am useing mac . I was useing finalcut pro 7 but I want to use premiere pro . i have some problems
1 voice over problem i connected centrance micport pro with usb i can see audio hardware but when i want to record it is saying eneble tracking for recording . What can i do
2. if i want to send footge with any bridge (fire wire) what can i do

so many options here but to start with basics:
using Firewire:
mic > XLR cable > XLR mic input of mixer > Firewire out of mixer > Firewire Input of Mac
using Decklink:
mic > XLR cable > XLR mic input of mixer > balanced output of mixer > balanced line in of Decklink
the mixer must have a mic input, which has an internal preamp, a line level input is no use; you need some thing like this ?
link: [M-Audio front|http://www.m-audio.com/images/global/mediahqpics/FWSolo-frontRGB.jpg]
link: [M-Audio back|http://www.m-audio.com/images/global/mediahqpics/fwsolo-backrgb.jpg]

Voice-over button hangs/locks

Hello,
hope someone can help me with my voice-over problem. When I push the record button in iMovie to do an voice-over the record button locks/hangs after almost one second, the green indicator is also freezing. When I try to pusch it again the turning colored icon is started but nothing works after that. Then I have to wait for about 10 minutes before the colored icon stops and then a large voice-over track is building in soundtrack 1. This will take some time and it goes all the way with the lenght of my film. When I klik the timeline it stops.
I have also tried it with a slide show but the result remain the same.
The VU meter is working OK (green-yellow), it responds very sensitivety on my speaking.
Thanks in advance and excuses for my English.

The problem was no longer excist after the last iMovie updates.

Problem with Decklink card during voice over

Hi,
i have PMG5 2.5 GHz with FCS & Blackmagic Decklink extreme card.
all these days i had a great time working on FCP . till i faced a peculiar problem
when i am capturing video from Beta or DV 50 , i am able to select video Only or Audio only , or Video & Audio .
but when iam trying to capture Audio Only option through the the Mic which is connected to the mixer, i am not able to capture audio.
even i have noticed one more strange thing, i have tried Voice Over tool in FCP 5.04 with Decklinik card and i am not able to grab any audio through the Decklink card.
but i can use built in audio for my voiceover.
has anybody come across this kind of problem,
can somebody help me .

Hi Rajendra,
your questions is marked as solved, but I haven't seen your question answered, so I might be wasting time. Anyway.
I bumped into the same problem not long ago. I'm using a Multibridge, but the problem and solution are the same. Here's the reply I got from Kristian Lam over at Blackmagic:
In order to get vo tool in Final Cut Pro HD to work, these are the
steps to follow:
1) Video Input in Blackmagic DeckLink preferences is set to match the audio input type. For example, if you're recording via the XLR connectors of your card, then then 'Inputs' under 'DeckLink Video Connections' must set to analog. It doesn't matter if it's component or composite analog video.
2) In the View menu of Final Cut Pro HD, set External Video to “Off”. When finished with the Voice Over tool, set External Video to “All Frames” to use the broadcast monitor.
3) You must have a stable video signal going into the card when using the vo tool or Final Cut Pro HD will not see the audio. (or use a Blackburst generator)
4) Use the Displays menu to set the DeckLink desktop to the same format as the video source, eg. NTSC 720 x 486.
Well, then select your Decklink Card in the Voiceover Input selection. Even after I had done all that, I couldn't see any audio coming into FCP. The solution to that was to raise the Trim at the top of the mixer. I got a nice signal into the Mackie and voilà also sound into FCP.
Hope this helps,
Colin

My iMovie voice recording is suddenly not working. As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured.

As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured. HELP!!!!

As far as I can see, it's random. Everything. Nothing makes any sense!
A the moment, the iPhone is playing music with the SIM card, but without anything plugged into it, but it's occasionally fading in and out.
Oh, and I doubt this is related, but about two months ago the iPhone failed to show that the battery was draining - it was stuck at 100%. This went on for a few days, it wouldn't even warn me at the 20% mark, it would just shut off. This happened for at least three full charges - I remember at one point it suddenly started working again at about the 70% mark, I'm not sure if it was alright after that or if it went glitchy on the next charge... but in any case, the problem mysteriously never reappeared after those few days.
Message was edited by: Shiranai

After upgrading to ios7 I can't open email attachments when I turn on voice over in accessibility. How can I solve this problem??

With the new ios7 upgrade I have noticed that some accessibility features are not as strong. In emails I am now unable to open attachments as although I can see them at the bottom of the email when I touch on them voice over reads the paragraph above and does not allow me to open the attachment. Is this a glitch still to be sorted or can someone help me solve it??

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

HT3475 voice over kit installation problem

it is coming that an error occured in installing voice over kit ,so now shuffle is not work working...........so plaease help me ..

This is the article to use, if your shuffle is the current 4th gen shuffle
http://support.apple.com/kb/HT4322
If there is a problem with syncing after enabling VoiceOver, you may want to do a Restore. On the shuffle's Summary tab, click the Restore button. This will erase the shuffle, reinstall its software, and set it to default settings.
When the shuffle restarts, it should go through the process described in the linked article above, where it says To enable VoiceOver when you set up iPod shuffle. Follow those steps to see if you can get VoiceOver enable.

Problem with voicer over on IMAC

hello , I have some troubles with Voice over on my IMAC. I am blind and this function is really important for me. I use it for many applications, but my bank had currently changed the graphic of the website, voice over fails to interact with images and so i could not do operations. someone can help me?

I am having problems with my Intel iMac's Firewire 800 as well. I have two WD drives daisychained on the 800 port. After 6 months with no problems, and a few weeks after updating to Snow Leopard the second drive intermittently stopped mounting after sleep. The devices attached to the 400 port were OK. It got worse over a few weeks, and after over an hour on the phone to Apple support and multiple tests (eg linking two computers using target mode), the tech said it was an 800 port hardware problem. My iMac is just back from having the logic board replaced (200 km round trip!!), and it has happened again - the second drive "was not ejected properly" after waking from sleep and has not mounted. WD refuse to support daisychained devices, though I don't think the drives are faulty because I can get them to mount using USB. So, you could have a hardware problem, but it may be a Snow Leopard compatibility problem if you have recently updated - other discussion topics have reported similar problems with firewire drives after updating to Snow Leopard.

IPod shuffle voice over for battery status problem

The voice over function for battery status doesn't work on my new Shuffle 4g. The other voice over functions do work.
I'm using Windows 7 (64bit). I have Itunes 10.5 . I down loaded the 64 bit version, voice over kit installer

Hi Imyman,
Apple has determined that the Apple Headphones with Remote included with the iPod shuffle (3rd gen) may fail under certain conditions. If your Shuffle has a certain serial number you can change your Headphones following this procedure:
http://www.apple.com/support/headphones/replacementprogram/
Hope this will solve your problem as it did for me.

Voice over IP Roaming problems between 2 Wireless Lan Controllers.

Hello,
we have problems with Voice over IP roaming between 2 Wireless Lan Controllers, this problem is not always happening. I have attached the detailed configuration. We are using LWAPP 1242 & WLC 2106 Controllers.
The phones they are using are Siemens Enterprise optiPoint WL2.
Is there maybe something wrong with the configuration our can I try some different settings?
Regards,
Jordy Broekhuizen

When a wireless client associates and authenticates to a WLC, it places an entry for that client in its client database. This entry includes the MAC and IP addresses of the client, security context and associations, quality of service (QoS) contexts, the WLAN, and the associated LAP. When a client roams to another LAP associated to the same WLC, it just updates the client database with the new LAP information so that the data can be forwarded appropriately to the client. When a client roams to a LAP associated with a different WLC, either in same or different subnets, it sends the information in the client database to the new WLC. This helps client to retain its IP address across roams and maintain uninterrupted TCP sessions. For more information on roaming in the WLC environment.
For the further description following URL for the WLC may help you
http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51ovrv.html

Voice Over Audio Problems

Hey! I've been working with iMovie '08 for just short of a month now, and I've never had any problems; until now. I want to create a Voice Over, which I know how by clicking the Microphone button and then selecting the clip. I did the first one, which worked successfully, I could hear it completely fine. However with the second it recorded, and it showed the waveforms there in the Time Line. Which means it has recorded the sound, however when I go to preview the sound I am unable to hear it. I can hear all other audio (including the previous V.O) and audio from the clips I've filmed, but these. Please can anybody help. Here are my Voice Over statistics:
Clip:
Volume: 100%
Ducking: Unticked
Fade in, Fade Out, Equilizer and Enhance: Unticked
Voice Over:
Built In Microphone ( The little green bars move when I make a noise so it's picking up something)
Input Volume: 100%
Noise Reduction: -45db
The other 2 are both unticked.
Please help! Thank you so much!

I am unable to mute the audio for Cut Away scenes that are added. It was working fine for one project but then new one it has stopped working. HELP Wake Up APPLE???

Problem in adding voice over presentation

Ok so I want to do a voice over narration on my keynote presentation
I go through the steps of adding audio to my presentation, on the recording screen
the red button is not blinking and my voice is not recording onto the presentation can anyone help pls
Ogay

This is my recommendation.
Step 1) Create your Keynote presentation.
Step 2) Record your speaking part (separately) with an audio recording program.
I recommend Audacity. It's a great free application. You can download Audacity from www.sorceforge.com among other places. You'll also want to get the Audacity LIB file that is needed to export your audio recording to .mp3.
3) From the Keynote Inspector, under the Document tab, go to the audio section and add your new voice recording file to the Soundtrack.
4) From Keynote, go to File, Record Slideshow.
While the audio plays, click through your slides. This is getting the slide change time down.
5) From Keynote, go to File, Export. Make sure to have the following settings:
Playback Uses: Recorded Timing
Include audio (sound files, movie audio): NOT SELECTED
Include the slideshow soundtrack: NOT SELECTED
Include the slideshow recording: SELECTED!!!
Click next and your Keynote presentation should export to a .mov file (keep in mind, this .mov file has no audio. we'll take care of that in the last steps).
6)Open the new .mov Keynote presentation in Quicktime Pro.
7) Open the original .mp3 sound file in Quicktime Pro.
8) Select All of the .mp3 file and then click CTRL + C to copy it.
9) Go back to the .mov Keynote file and Select All. Then go up to Edit > Add to Movie.
This adds your sound and movie file together.
10) Finally click on File > Save As. Select, Save As A Self-Contained Movie and you're done.
I Hope This Helps!

Voice Over problems

Similar Messages

Maybe you are looking for