Voice Recognition Function Not Working When Starting Video/Audio/Text Chat

The Speech Function with Voice Recognition is really neat, but I am having one problem. When I say "Video Chat with Tom Smith" it will say "Tom Smith is not in your iChat Buddy List." It recognizes the name, but it says the person is not in my iChat buddy list and will not let me video chat with that person. How can I fix it so I can video/audio/text chat with someone using the speech function?
Message was edited by: anishmsheth

How can I fix it so I can video/audio/text chat with someone using the speech function?
http://support.apple.com/kb/TA27509

Similar Messages

IPhone 5 - Voice Recognition Does Not Work

The voice recognition does not work in any application. When you speak you see the waveform change following your speech. In Siri, it even recognizes when you stop speaking. In apps like Messages, the progress circle just goes around and around without stopping until you kill the app. In Siri, the progress circle goes around and around but after a while, Siri comes on and says she can not fulfill the request and to try later. I think I searched every possible setting.

It is covered under warranty. Make a Genius bar appointment.

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Multicam source sequence - audio offset does not work when syncing via audio

Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
Unlesss I'm missing something?

I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

Why does the sum function not work when I try to add a column of decimal numbers? The value is always returned as 0. No problem with whole numbers but decimals do not work!

just bought a MacBook Air and using Numbers to make a spreadsheet for financial purposes. The sum function is working ok for whole numbers but when I try to sum a column of 2 decimal place numbers the result always comes back as 0. Can anyone help?

Hi laura,
I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
Also You might want to update your profile to reflect your current systems!
quinn

Keyboard does not work when start up

I was trying to run a hardware test through Mac instal disc, but there was not response after I pressed D or C. I also could not hear the starting sound as usual, even I turned the loudest.
However, everything became normal again after the start up completed.
Can somebody help me please...

Can't remember at the mo exactly but make sure you have everything connected correctly. I think there is a not on the AHT that details where you can and can't plug in USB keyboards/mice.
Make sure that every other unnecessary peripheral is disconnected too.

Why iPad mini retina smart unlock/lock function not working when I using 3rd party cover with magnetic

I recently bought a leather case from store with smArt unlock/lock function with magnetic. I try to use it on my iPad mini retina when I try to close and open it doesn't work. I already on my smart unlock function inside setting. May I know where is the magnetic area of iPad mini retina ?

The "Lock/Unlock" feature is enabled by installing a compatible Smart Cover/Case (or third-party equivalent) with an embedded magnet in the correct position in the cover. Are you using a real Apple product? If not, the cover/case you are using may not have the magnet in the right place or may not even have one at all.
If you ARE using a real Apple Smart Cover/Case and you have an Apple Store nearby, have them check both the case and cover you are using. You may have a bad magnectic switch on the iPad or a faulty cover/case.
I also remember reading here of a Smart Case/Cover which had the magnet installed upside-down and was repelling rather than attracting. You might want to take the cover off and flip it to verify this...you'll have to slide the cover around in different positions on the right-hand bezel on the iPad to see if you can activate the magnet.

Flash builder + Zend amf | Insertion function not working when called second time

I'm using standart createOrders function which is autogenerated by Flash Builder 4.6. It works brilliantly when used once. Here is code:
protected function okButton_clickHandler():void
                var orders2:Orders = new Orders();
                //setting values
                createOrdersResult.token = ordersService.createOrders(orders2);
                ordersService.commit();
When same button is clicked second time and consequently okButton_clickHandler launched, data is not inserted to database. I added result handler with trace("saved"); and what I saw was that "saved" was written on first click, but not second.
Also I used Charles to see whether request is being sent second time. And no it is not.
Just tried to generate auto generate form. Only had to add commit(); because else request is not sent. And here is save problem — request is sent only on first button click.
So all in all problem is in fact that ordersService.createOrders(orders2); works only once. Because if i try
createOrdersResult.token = ordersService.createOrders(orders2);
                ordersService.commit();
                createOrdersResult.token = ordersService.createOrders(orders2);
                ordersService.commit();
OR
            createOrdersResult.token = ordersService.createOrders(orders2);
            createOrdersResult.token = ordersService.createOrders(orders2);
            ordersService.commit();
there is only one row added to database. Any ideas?

Think you can find the problem in your php / whatever -backend. Generated code does'nt much know about autoincrement table ids.
So for the example tabel orders:
orderID int(10) auto_increment
orderName varchar(255)
...generated php for createOrders looks like:
$stmt = mysqli_prepare($this->connection, "INSERT INTO $this->tablename (orderID, orderName) VALUES (?, ?)");
mysqli_stmt_bind_param($stmt, 'is', $item->orderID, $item->orderName);
So if you dont give the right orderID, the second insert will fail.
Delete the autoincrement parts and code will work:
$stmt = mysqli_prepare($this->connection, "INSERT INTO $this->tablename (orderID, orderName) VALUES (?, ?)");
mysqli_stmt_bind_param($stmt, 'is', $item->orderID, $item->orderName);

Speech & Voice Recognition do not work in a new "managed" account...

Hello everyone!
I created a new managed account and cannot get Speech Recognition to be accessed by the new account.
I need to restrict the software the user can access, but have set user to be able to open system preferences and allowed supporting programs. However, when I try to turn on speech recognition from the Speech control panel from the managed account, I only have the option to adjust Text to Speech. If I click Speech Recognition, the preference pane remains empty.
Does anyone know who to allow a managed user to use Speech Recognition?
Thanks in advance!
Dave

Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

XPath functions NOT working when the SQLType is CLOB !!

HI All,
We have declared a ComplexType Element as CLOB as it will cotain huge Files as part of it's Text Node.
And now when we execute the XPath+SQL Queries on the Table (which is created on the registered schema) the XPath functions cotains() and translate() no longer working !!!
Pls let me know is there an approach to overcome this ?
Do i need to use Oracle Text ??
Regards
Sateesh

One of the parameters in the htmldb_get is the page the process runs on. You should change that to the current page or make page 0 public as well.

Camera function not working when iphone is locked!!

I recently upgraded my iphone 3GS to the IOS 5.1 however i have noticed that now i am unable to use the camera whilst my phone is locked.
I can use the button but the screen kind of jumps up, like when you double click the home button, to reveal the bottom part of the camera, the shutter and camera/video camera slide, but then the locked page comes back down to hide the camera. Also the function button isnt properly formed, i have the camera but instead of being in a box just the top and bottom lines are shown.
It's so annoying can anyone help?

You now slide it up to open the camera instead of tapping.

Own voice app does not work when using Maps-N8

I've recorded my own voice and uploaded it in Nokia Maps. Own Voice is found in the list of available languages but still after choosing it, all I get is a female chinese voice. I want to hear my own beautiful voice but how??

Have you tried deleting the voice catalogue file from the Maps folder?
Go to the File manager and browse your memory card to cities\diskcache\voices -folder, and delete voice_catalog file.
After that turn Maps application "Online" and check the voice catalogue again from Settings > Navigation.
Happy to have helped forum with a Support Ratio = 42.5

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Voice Recognition Function Not Working When Starting Video/Audio/Text Chat

Similar Messages

Maybe you are looking for