Voice solution for 2 directly connected LANs
hi,
we have 2 offices connected using microwave link p2p(using cisco routers at both ends).And we are about to deploy voice solution that will enable staff at both offices to make calls between the 2 offices using softphone technology. i need someone who have deployed this kind of solution before or have an idea of what it takes to help me with the tips of how to go about it.i wouldnt mind if diagram is attached.
thanks
You can download CME 4.0 by downloading the right IOS image. (I am not sure of licensing, if you do this).
The IOS version for CME 4.0 that I have seen is 12.4(9)T, although later versions may have for example CME 4.01 (??)
For configuring CIPC,
ephone 10
description CIPC softphone
mac-address 0000.0000.7A6A
type CIPC
button 1:5
(Obviously, you have to define ephone-dn 5)
Hope this helps.
Please RATE this post !!!
Similar Messages
-
Voice solution between 2 directly connected LAN
hi,
we have 2 offices connected using microwave link p2p(using cisco routers at both ends).And we are about to deploy voice solution that will enable staff at both offices to make calls between the 2 offices using softphone technology. i need someone who have deployed this kind of solution before or have an idea of what it takes to help me with the tips of how to go about it.i wouldnt mind if diagram is attached.
thanksIf they are on the same LAN, registered to the same CCM, the only thing you need to do is to configure the Cisco routers correctly for voice. RSVP works well now (not in the past) Setup some voice prirotization and you should be set. Usually the microwave boxes have low ms roundtrip times, do you should be ok for voice quality.
-
Need solution for opening multiple connection to server in parallel
Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venuhi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye -
Cheaper solution for a 5508 wireless lan based
Hello, our wireless lan is based on a single 5508 (It's not HA). We would like to use a cheaper solution as a backup if this 5508 falls. Could 2504 works?
In short words, we have two RAP's that are connected in a hp switch and all ap's are connected to these rap's. Same for wlc, it's connected to switchHave you checked Radio Shack? The staff are pretty knowledgeable about what you need to connect MBPs to TVs. Their cables are way less than $300.
!http://i50.tinypic.com/izvwo1.gif! -
A Solution for freeze at Connect to iTunes & iPhone not being recognized:-)
Had a nightmare last night whilst updating my 3GS to IOS 4 on a vista PC, really thought I'd broken my phone, which refused to talk to iTunes or reboot. It just constantly displayed a USB plug with Connect to iTunes, Here's how I finally resolved it.
DFU MODE:
Step-by-Step
1. Turn the iPhone ON
2. CONNECT it to the computer with a DIRECT USB connection.
3. Make sure iTunes is open so you'll know when it enters DFU mode.
4. HOLD the Power/Sleep-Wake button AND the Home button for 10 seconds.
5. RELEASE only the Power/Sleep-Wake button and continue to hold the Home button.
6. WAIT until iTunes recognizes the phone in DFU Restore mode (in Windows a bubble pops up saying it recognized new hardware "DFU Mode" or something to that effect)
The last step may take SOME TIME, 60 seconds or so.
The screen should be OFF (black), if you see the "Connect to iTunes" logo, START OVER.
It may take a few attempts to do the steps just right but it worked for me.
Failing that completely and I mean completely remove itunes and re-install then carry out the above. Details on how to completely remove iTunes here http://support.apple.com/kb/HT1923
Took a while but all's well now
Message was edited by: BazaBoy
P.S I didn't lose any iPhone content but had to restore my phone then update from iTunes which even after you have completely uninstalled and reinstalled it should find all your music etc again.Have you attempted to connect iPhone to other USB Ports on your Mac?
Make sure you are not connecting the iPhone via a USB Hub, Mac keyboard, or using a USB extension cable.
Posted below are some articles that may assist.
iPhone: Not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iPhone: Troubleshooting USB connections
http://support.apple.com/kb/TS1286
iPhone and iPod touch: How to remove and reinstall the Apple Mobile Device Service on Mac OS X
http://support.apple.com/kb/HT1747?viewlocale=en_US -
Found a NEW solution for "isn't connected&qu
Hi guys, first time poster.
So I was having troubles with my ZenV not connecting to the media organizer. Was getting the ever-so-popular "ZenV not connected." So I come here, look through the hundreds of posts trying to find out why it isn't connecting or being recognized by the ZenV media explorer. Spent at least 8 hours rolling back Windows media player, tweaking registries, uninstalling and reinstalling, all to no avail.
So, right before I throw my ZenV through the wall, I tell my girlfriend (who happened to give me the ZenV for Christmas). She tells me to leave the ZenV home today instead of bringing it to work, so she can try to figure out what's wrong.
I come home today, and she has this triumphant smirk on her face as if she has found the cure for cancer. She figured out a VERY simple and easy way to fix the problem!
All she did was do a system restore. That's it! She restored back to December st, just to make sure that I wouldn't have any problems, since it worked fine Christmas day. All I did was reinstall ZenV media explorer and VOILA, I added like 40 more songs to my ever growing list of musical joy!
So basically, all you do is:
Go to your START button on the windows toolbar, and go to RUN.
Type in "msconfig" and there will be an option to do the system restore. It also gives you the option to restore back to any date you want.
And that's it! I'm pretty sure some people will not want to do a system restore, but we had nothing to lose since our computer is mainly for entertainment purposes. However, for most people, I really think this might work for you as well.
I really think what messed up my ZenV in the first place was doing a registry sweep. After my girlfreind did a registry sweep, I was not able to connect to the ZenV Media Explorer. This might be a heads up for you guys in the future.
Anyways, I hope this helps!!!Hi HornetMaX,
Thanks for posting, great advice
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
My solution for ipod wont connect to wifi
my ipod touch wouldnt connect,took back to store received new one ,still wouldnt,went to apple store it connected to apple wifi,called router mfg up,i had to go into settins an change the channel it was using i was on channel 10 was advised to either us channel 6 or 11,i hav muliply devices using home wifi,they all worked except my ipod,i was told problem was probably some kind of interference ,everything working fine now,try this hope it works for you too
do this http://support.apple.com/kb/ts1398. if for some reason it does not work try another connection. if the other connection is fine nothing is wrong with ipod (it is the router) but if your ipod does not connect to any wifi then you have to try restore as new (http://support.apple.com/kb/ht1414) but dont forgot to backup (http://support.apple.com/kb/ht1766). if your ipod still cant connect to ANY wifi then you need a repair and contact apple or an repair shop.
-
One Solution for Fixing Slow Wireless Connection
Quick and easy solution for slow wireless connection.
My hardwired PC connection was working fine over FIOS, but my wireless connection through my Macbook Pro was soooo slowwww, although the machine itself was fine. Pages would take forever to appear, then finally sort of pop up. Didn't really seem to be a Mac problem, just a connection problem.
After searching forever to find a fix, I found a quick & easy solution that works at least for now: change your DNS address.
I'm not a techie so I don't know ALL of the implications of doing this, but in desperation, it has worked for me and I think at no risk to your network or machine. Changing my DNS address has made my connection blazing fast and relieved many weeks of frustration.
HOW: I can only share how to change on a Mac. (Please chime in if you can give directions for PC. ) Just go to this Apple support page, which will outline exactly how to do it. I used 4.2.2.2, I think you can also use 4.2.2.1 as the DNS address. http://support.apple.com/kb/TS2002
Other resources I've found follow:
(specific to FIOS): http://www.stationstops.com/2008/04/16/high-speed-internet-3-tips-to-optimize-your-verizon-fios-broa...
(Specific for Mac): http://forums.macrumors.com/showthread.php?t=358919
Maybe this is a commonly-known fix but it wasn't for me, so hopefully it will help some of the other less-than-technical people out there. Good luck!Actually this is a common problem with Mac OSX (http://rubyisbeautiful.com/2008/2/8/osx-dns-fix-update) and how it does DNS lookups and pertains to routers that provide the internal gateway (i.e. 192.168.1.1) as the DNS address which is what the ActionTec does by default.
You can change that at the router level to either push out Verizon's dns that the router then uses or any other open dns server. I had to do this a long time ago for some of the OS X boxes on my network. -
When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?
Connect it to the charger unit as instructed by Apple.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support -
Traceroute issue- MPLS VPN on directly connected interfaces
I have 2 Catalyst 6509 Switches that Im trying to bring up and MPLS VPN connection between. The loopbacks can ping each other, as well as the directly connected interfaces (the interfaces travel through 2 switches, but no routing etc in between). An OSPF neighbor relationship DOES come up, and the routing tables appear normal. However, the MPLS VPN does NOT come up.
After further review, I found that the routing tables are correct on either side for the loopbacks (public addresses X’d out on first 3 octets):
SWITCH A:
Bryan-26th-CAT-2#sh ip route 10.255.2.2
Routing entry for 10.255.2.2/32
Known via "ospf 23532", distance 110, metric 2, type intra area
Last update from X.X.X.70 on Vlan65, 00:10:25 ago
Routing Descriptor Blocks:
* X.X.X.70, from 10.255.2.2, 00:10:25 ago, via Vlan65
Route metric is 2, traffic share count is 1
SWITCH B:
DAL-COLO-6509-1#sh ip route 10.255.2.3
Routing entry for 10.255.2.3/32
Known via "ospf 23532", distance 110, metric 2, type intra area
Last update from X.X.X.69 on Vlan65, 02:26:50 ago
Routing Descriptor Blocks:
* X.X.X.69, from 10.255.2.3, 02:26:50 ago, via Vlan65
Route metric is 2, traffic share count is 1
This is exactly the same for the directly connected interfaces on VLAN65. (X.X.X.69 and X.X.X.70). The ARP cache also shows to be correct:
SWITCH A:
Bryan-26th-CAT-2#sh arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet X.X.X.70 147 0009.b6a4.b800 ARPA Vlan65
Internet X.X.X.69 - 001c.b144.5800 ARPA Vlan65
SWITCH B:
DAL-COLO-6509-1#sh arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet X.X.X.70 - 0009.b6a4.b800 ARPA Vlan65
Internet X.X.X.69 141 001c.b144.5800 ARPA Vlan65
And once again, the OSPF Neighbor relationship does come up:
SWITCH A:
Bryan-26th-CAT-2# sh ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
10.255.2.2 1 FULL/BDR 00:00:30 X.X.X.70 Vlan65
SWITCH B:
DAL-COLO-6509-1#sh ip ospf neig
Neighbor ID Pri State Dead Time Address Interface
10.255.2.3 1 FULL/DR 00:00:33 X.X.X.69 Vlan65
In the Troubleshooting MPLS VPN manuals- it shows to test trace routes. All of our other connections like this the trace routes work fine. In this case though, I cannot trace route not only between the loopback interfaces, but between the DIRECTLY CONNECTED interfaces. I don’t know what this is. It should simply be a one hop trace route. I believe this is what is keeping the MPLS VPN from coming up. Any ideas? Here are the relevant OSPF configs and interface configs as well:
SWITCH A:
interface Vlan65
description Connection to DAL-COLO-6509-2
mtu 1580
ip address X.X.X.69 255.255.255.252
no ip redirects
no ip unreachables
ip pim sparse-dense-mode
ip ospf mtu-ignore
mpls label protocol ldp
mpls ip
router ospf 23532
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
passive-interface default
no passive-interface Vlan65
network 10.255.2.3 0.0.0.0 area 0
network X.X.X.69 0.0.0.0 area 0
SWITCH B:
interface Vlan65
description Connection to Bryan-26th-CAT-2
mtu 1580
ip address X.X.X.70 255.255.255.252
no ip redirects
no ip unreachables
ip pim sparse-dense-mode
ip ospf mtu-ignore
mpls label protocol ldp
mpls ip
router ospf 23532
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
passive-interface default
no passive-interface Vlan65
network 10.255.2.2 0.0.0.0 area 0
network X.X.X.70 0.0.0.0 area 0
Any ideas would be appreciated.
Thanks
GregGreg,
Can you explain more about your issue?. When you say MPLS VPN is not coming up, do you mean the ping (or traffic) from CE connected to one 6509 is not traversing the MPLS cloud to otehr CE connected to remote 6509?.
Do you have VRF enabled with respective RT import/export?. Do you have MP-BGP with VPNv4 AF enabled?.
To confirm if basic MPLS is working fine, Can you check if you have LDP neighborship up and running?. Use "show mpls ldp neighbor" to see the session.
Also do a "ping mpls ipv4 <remote-loopback> <mask>" and see if it works?.
-Nagendra -
When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.
I can't follow your meaning. What does connect directly to your ISP mean?
Did you mean turning off WiFi but turning on Cellular Data on your iPhone? -
I forgot about slow download speed's negative effects... hence (I think) the videos I downloaded stop in the middle. I can get a better download speed if I connect directly to LAN. Is there anyway for me to fix the videos previously purchased or re download them without having to re purchase them? I'm attempting to play the video's directly from iTune "purchased" folder on my Win7 Home Premium PC.
Never mind.. I found instructions on how to re download purchased items. I only need help downloading 2 more items. I love the attention I've recieeved (I guess silly questions go unoticed... sigh)
-
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
Solution for 0x80070035 Error When Connecting to Non-Windows Shares
My situation:
Using Windows 7 64-bit OS I needed to connect to two Haas mills. Both Haas machines have internal hard drives that have been shared and made available to the network. Using Windows XP we were able to map drives or create shortcuts that pointed
to these shares. When we tried connecting to the shares with Windows 7 we received the error "Windows cannot access \\servername\sharename." Looking at the details of the error I found the error number 0x80070035.
The solution was found in another forum:
"On your “file server,” what is the underlying OS? If it is a Linux based OS that uses Samba or CIFS to share out to Windows clients, you may need to adjust your NTLM authentication properties.
At the Start menu search dialog box, type secpol.msc. Navigate to Local Policies >> Security Options.
Go down to Network security: LAN Manager authentication level and first read the Explain tab.
Then go ahead and change the authentication level to Send LM & NTLM - use NTLMv2 session security if negotiated.
If this fails to work, make sure you set your authentication properties back to the default level."
Once I made the registry change, the shared areas were accessible.Hi,
This could be an issue if the security software is interfering with the connection.
You may temporarily try to disable the security software and check what happens.
Also change the Windows Firewall settings and check if that is causing the issue.
The error code 0x80070035 indicates that the network path is not found.
This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.
1.Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2.Right click on the connection that you use for the local connection, and then click "Properties".
3.Click Continue button to verify the administrator permission.
4.Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5.Click "Advanced" button in the open window.
On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
Thanks.
Maybe you are looking for
-
How to do document number ranging in B1.How to see full details of G/L document.
-
All photos in my icloud file on my pc have a padlock icon. How do I unlock the photos so that I can upload/download for other applications? Please help!?
-
X does not apply to your selection because it is not inherited. It is applied to an enclosing tag.
I feel like posting screenshots may be the best way to explain this one. I'm building a website. Everything works great except my content DIV, which looks fine in design view, but completely un-aligned in Firefox/Live View. (See figures 1 & 2) Now, w
-
Can't access iCloud in system preferences ... crashes computer!
With the latest iCloud update, I can not access the iCloud preferences within system preferences. When I try, I get a spinny ball and then a total crash of my computer, to the point where the mouse takes several minutes to move across the screen. I t
-
Hard Drive Replacement Help (G4 QS)
Hello- I've been reading some posts and there is a ton of knowledge here, so maybe somebody could share some info with me. My situation is this: I'm running OS X 10.3.9 on a 733 Quicksilver G4. Every now and then I get the flashing question mark when