Voice sounds only in the left loudspeaker

Hi!
Can anyone help me? I've recorded some songs with G-Band ant there's no way that the voices can sound on both loudspeake, it only sounds in the left one. I´ve a Condenser microphone.
Greetings,
Miguel

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly

Similar Messages

  • Sound only in the left headphone

    I'm running a 64 bit Win 7 on a HP X16-1353CA laptop. My speakers are working fine, I even plugged in external speakers with also worked fine in terms of balance between L and R; however, when I plug in headphones I only get the sound coming out of the left ear bud or headphone. I have checked the balance and they are both even. I did manage to hear a faint sound in the right headphone when I cranked the volume up to 100. It can't be the headphones since I've tried 3 different headphones so far. Any help would be appreciated greatly, thanks!

    If you have tried it with 3 different sets of headphones and get the same result from all three, you have a port failure.  On the inside of the notebook are L and R connectors that contact the audio jack to distribute your audio and give you stereo sound.  Since you are only getting sound from the left ear, the R connector is probably no longer making contact, and you need to get the computer repaired.
    Though I am an HP employee, I am not here as a representative for them. I am here of my own accord to help those requesting it.
    Please demonstrate any appreciation for help with a kudos!

  • MBP Retina headphones sounds only on the left

    MG... this is the third problems I'm having with my MBP retina.
    This time I can barely listen to music, using the headphones, from the right side.
    What could it be?
    thanks

    Check the balance in System Preferences>Sound.
    If that is not a solution, try a PRAM reset:
    http://support.apple.com/kb/ht1379
    Ciao.

  • Any Headphones I plug into my Macbook it only Plays sound out of the Left Earphone??

    I got New headphones and after about a week i noticed when I plugged it in it only played sound out of the left headphone, i plugged it into my phone and I pod and it Played out of both, then I plugged in different headphones into my Macbook and had the same problmem. I took a thin cotton swab and a TINY bit of rubbing alcohal and cleaned it out, still didnt work. Any ideas would help thanks! Im in panic mode!!

    First check the balance in the Sound System Preferences.
    If that is set correct I would bring it in to an Apple store and have them take a look at it.

  • Sound only coming from left speaker.

    I recorded live music last night from a soundboard in a music hall. The new belkin tunetalk pro on my ipod g5 worked really well and was easy to use. Problem is I did not have the right kinda hookups. I need two 1/4 plugs that converted to one 1/8 mini jack. so i had one 1/4 to 1/8 mini and they gave me a great sounding feed but it's only on the left as in the left ear. i downloaded to to itunes. actually it did it as soon as i pluged the ipod in. i did nothing. the sound guys said i should be able to split to right and left with something like garageband software. i impoted into GB and now i still have the great sound coming out of my left speaker and nothing on the right unless i choose mono 1 or mono 2.
    my question is how do i split this and make the recording come out of both speakers? the file in garageband has 2 wave zigzag lines. one on top of the other. i'm sure there's a way but so far i've not found an easy fix on apple garageband support groups but i've not asked either. tonight i will have the right connections so will see how well a rock show records. last nights was an acoustic show with a guitar and vocal mic

    You can't really make a stereo file from a mono recording.
    Stereo needs two mic/2 channels in the recording phase. The best you can do is set the track to mono so it comes from both speakers, or create fake stereo by using two tracks and offsetting one of them slightly and panning each track to the side some. It won't be stereo, there will be no center, just Left and right

  • In SharePoint 2013 navigation, is it possible to add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

    If I want to add a custom link to the left-hand navigation menu In a SharePoint 2013 sub-site, it can be done by visiting
    Site Settings à Navigation section and adding the link under
    Structural Navigation: Editing and Sorting section. However, this will automatically add a matching link to the top menu as a dropdown.
    (Note that Global Navigation is set to “Display the same navigation items as the parent site” where “Parent is using Structural Navigation.” and Current Navigation is set to “Structural Navigation:
    Display only the navigation items below the current site”)
    Is there a way to just add a custom link only to the left-hand menu without getting it in to the top menu dropdown?

    Hi Asanka,
     Please refer the below link which may help you to resolve your problem.
    http://blog.navantis.com/configuring-sharepoint-2013-navigation-to-span-site-collections/
    If its not helping you please let us know
    Sekar - Our life is short, so help others to grow
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Audio in firefox is only in the left channel

    whenever i play my composition in Chrome, it plays on both channels but whenever on firefox; it plays only on the left. Is there a solution to this?

    Hi Paolo,
    There is no know issue with edge animate audio channel with Firefox.
    Please try clearing browser cache and check again.
    Please also post a URL so that I also test the same.
    Regards,
    Devendra

  • Why does the sound orient towards the left speaker?

    So, occasionally the sound on my computer orients itself greater on the left side of my speakers. I never tell it to change from the centered, balanced position. I notice this change primarily when using Itunes or DVD player. When i notice an odd crackly noise, i check my sound configurations through system preferences, and find to my surprise the sound is favoring the left side of life. Is there a way to lock this configuration to prevent unwanted fluctuations, like in some other setup panels? Or, does anyone have any bright ideas why my computer prefers to play sound from the left?
    powerbookG4 15" aluminum   Mac OS X (10.4.7)   sound issue

    Hi snowbum, Welcome to the Discussions.
    For over a year, this has been a known issue, Version Tracker has some software to help keep in balance:
    http://www.versiontracker.com/dyn/moreinfo/macosx/26786
    Joe

  • Hearing only with the left ear-phone!!!

    I can hear only with the left ear-phone!!! The ear-phones are working normally in others devices. I have already reset the I-Pod but it didn´t work at all. Is there a way to balance the ear-phones or the i-pod must be repaired?
    regards.

    Welcome to Apple Discussions!
    Have you tried using the iPod with other headphones. Do they work?
    btabz

  • Built-In Microphone records audio only from the Left speaker

    I'm not sure if my settings are correctly set up, but whenever I record through Logic, it only picks up sound from the Left Speaker of my MacBook Pro.
    When I try to make noise through the Right Speaker, Logic's sound levels do not respond.
    Any ideas why this is happening? I don't plan on using the built-in Microphone for much longer, but it's all I currently have at this point. Thanks!

    James,
    Again, thanks for the response! I guess what Tokuda said about the mono Mic in the left speaker settles that. I was just confused, because when I used Sound Forge on my Windows partition, it would always pick up sound from both speakers (I think?). I could be wrong on that one too though.
    As for goals, my long term goal is to produce Club/Dance music & some serious Vocal work with Logic. Only thing is I have no basis or ground knowledge of music. For instance, I don't even know how to play the piano, or read music for that matter. Sad, I know...but it is a work in progress. And the only Microphone I use is built-in and my voice overs always sound so bland & one-dimensional. No dynamics or great effects to them, like Tpayne, BSpears, or Madonna vocals. Not sure where I should start, maybe take some basic music theory courses at the local community college, grab an internship at a radio station, & then further my education @ SAE, or Berklee College of Music to learn more advanced editing techniques.
    In the meantime, I have been producing Cheer, Dance, & Aerobic music for the past 5 years. It first started as a hobby, and then transformed into its own little business, and now I do hundreds of mixes for Cheerleaders & All Star programs all over the place! It came so natural to me though...Laying beats over songs, then adding my own creative touch to make it my own. I've been using Acid, which is GREAT for what I do, but isn't going to get me much further than that. That being said, I finally made the decision to move up to Logic, not only to broaden my musical horizons, but to hopefully continue making Cheer music with it as well.
    Since Acid is PC only, I still do work on my desktop PC and have been slowly weaning myself from it. The Logic learning curve is extremely difficult (for me at least) and it's taken a lot of getting used to some things like NOT being able to cross-fade my loops. Very, very annoying. Nonetheless, I know I have to make the switch to Mac if I'm really serious about making it anywhere in this biz.
    Anyway, I can totally email you one of my mixes (if you're interested). I would post a link here, but I gather most of the musicians on here wouldn't really appreciate it as much as I do, haha. Oh and by the way, thanks for taking the time to listen & help me out here. It means a lot man!

  • Sound only workin from Left speaker

    I have the speaker set of SBS 260, and the sound has worked perfectly fine until recently, where it is only coming out of the left speaker :S
    Im not sure what the problem is, whether its a driver problem, or the speak is broke.
    Any information will be greatly recieved.
    Thanx

     

  • Output sound moves to the left speaker randomly

    Howdy. I have a weird issue. I just installed the new firmware, everything is fine, except i went to test the sound vloume before and after the firmwre upgrade to see if it actually went up. After the upgrade I noticed that my speakers werent aligned properly, so my volume test was pretty much a failure. no big deal. BUT this isnt the first time that the speaker orientation of whatever has migrated to the left on its own. I once thought the headphone jack was broken cause i could hear sound only mostly in the left. and then i noticed a day after that the left speaker was louder too. I went to the sound preferences and seen thatthey were changed. I didnt even know this option existed so it wasnt me who changed it and no one uses my macbook but me.. This was 2 weeks ago. Today I found that the same thing happened again and it was all shifted to the LEFT.
    Anyone know what is going on? I'm not changing it. Is there a shortcut key I dont know about that could be doing this? Is this happening to anyone else? Maybe everyone should check to see if its already like this, maybe thats why its quiet for everyone. It's significantly louder when the speakers are centered, i just dont know why it jumps..

    BLK4BDK wrote:
    Since I posted the question I have found my manual and do see what KC is talking about but what is the pinhole next to the earphone jack then?  its not labeled in the manual, as far as I can see.
    It certainly is labeled.
    Open the link I gave.
    It is the "Top microphone"
    The other is the "Bottom Microphone"
    Both are clearly labeled in the manual.

  • Something's wrong with my headphone jack, it only plays the left side!!

    I know it's not my headphones, cause I've tried 4 different ones, one of them new, and it''s always the left side that's the only working side. If I wiggle the headphones in the jack, the right side will cut in and out. This just happened today, I have no idea why. I didn't drop it, or get it wet or anything, I have no idea what couldv'e caused it. I've had the iPod since the beginning of this year, I don't think I registered it or got a warrenty or anything, I'm not sure how'd I'd check though. Can Apple fix this or can I fix it myself or what would you guys suggest? Thanks.

    That happened with me also when I bought my skull candy headphones(iPods headphones hurt my ears). My headphones also worked for a while and then went to a point where I could only hear out of one side. I finally reverted back to the iPods headphones. I just stuck with the original headphones. Maybe I'll buy some of their more comfortable ones.
    Also try not winding your headphone cord around the iPod too tightly. I looked somewhere else and someone said that that could be the problem. If you do wrap the excess cord around the iPod, try wrapping them around not as tight. I tried that and I got some extra life out of my old headphones. I would probably still be wearing them if I hadn't stepped on the jack and bent them.
    I'm sorry that this is so long. Hope this helped.

  • When i open firefox i can only see the left side of the website but the left hand side of the website is on the right side of the screen

    it was working fine before and then 1 day i loaded firefox and now i can only see 1 side unless i i use full screen mode, please can any1 help me
    it looks like the left hand margin is way to big but i hav already looked at this and it is not the problem, and ive tried zooming in and out aswell and reseting the zoom ect

    Hi - I think this is related to the Babylon Toolbar
    Right Click on the toolbar in the grey area this is at top of the screen - If the Babylon Toolbar is ticked deselect it and all becomes well.
    Cityjet

  • My dvd only plays the left speaker of my song...

    Hello everyone. I recently exported onto a dvd from adobe premiere 2.0 that included a song that i had recorded in mp3 format.
    In the song, some of the instruments come out of the left speaker, and some come out of the right. When i play this video on a standard dvd player through a television, the mp3 only plays the audio that is supposed to come out of the left speaker, but it plays it through both speakers. This renders many of the instruments unhearable.
    When i play it through a computer, though, with a dvd decoder, it plays everything perfectly.
    What should I do?

    MP3's are very often problematic. First, I would check your source file in G-Spot, to see what it reports, 2-channel, or 1-channel.
    Personally, I always convert ALL MP3's to PCM/WAV and Import those. This eliminates the issues, and Audition (or the freeware, Audacity) can do this easily. The only exception will be tiny SFX files, and most are mono anyway. Where did your MP3 come from?
    Good luck, and let us know how it goes,
    Hunt

Maybe you are looking for

  • Office Icons In Launchpad

    I have just upgraded to Mountain Lion from Lion on two laptops. Previously, in Lion, Microsoft Office had two folders in Launchpad - one called "Microsoft (Main)" and the other called, if I recall correctly, "Microsoft (Others)". Now, in Mountain Lio

  • Continual Crashes with CR 11

    I'm experiencing continual crashes with Crystal Reports 11. Seemingly random in nature -- sometimes when I perform a refresh, sometimes when I close out a report, sometimes "just whenever". Environment: Virtualized XP Professional SP3 [VM Workstation

  • Two EHP1 in parallel on same host....Please reply ASAP

    Hi, We have NW BI 7.0 with two different SIDs. The ABAP is AW1 and J2EE is JW1. They are on the same host. They are ABAP and Portal for our BW system and integrated to each other. Can we run both enhance package installation in parallel as they are o

  • ShowDocument not working with Host name in IE

    I have the following applet code: try      URL NodeURL = selectedNode.getNodeURL();      if (NodeURL != null) String pageName = selectedNode.getNodeURLTarget(); getAppletContext().showDocument(NodeURL,pageName);      } catch (Exception e) System.out.

  • ? about Adobe Fillable Forms?

    this may be a stupid question because i've only had a half a day to figure out how to make a fillable form, which i did and i understand that you receive a datafile when they hit the submit button. What i want to know if there any way to set it up to