Voice synchronization with text(words) for a self learning project.

Trying for voice synchronization with text(words) for a self learning project. I have about 20 swf files with lengthy text to synchronize. Please suggest the best possible way, not the tedious manual way, please...Thanks..

Similar Messages

BW Self learning project or case study

Hi All, Does anyone can help me to get BW Self learning project or case study, as due to my location and work nature I can't join BW project in class, as it demands access only from inside the college, can't access from remote location, but I do have BI7 and R3 access, thanks.

Hi Frank,
If you know already Bw then In IDES system work on demo cubes & itz reports...........
Hope it will help you.....

Issues with Microsoft Word for mac closing when I try to open old or newly downloaded documents

When I download a document from my professor, or try to open an older document, my word automatically quits. If it's already closed and I try to open a document, it will show the dot at the bottom of the icon that it's loading to open but it quickly disappears and quits itself. Is anyone else experiencing this issue or know what I can do to fix it? Thanks.
MacBook Pro 13'' 2011
Microsoft Word for mac 2011
OS X Yosemite 10.10

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Separators with text content for menus

I want to have a menu/choicebox with several separators to split the menu into sections, but I would like the separators to be more than just lines, specifically I want some text there -- essentially the separator acts as a header for the menu items in the section that follows.
Is that possible?

Hi. You can use SeparatorMenuItem:
        SeparatorMenuItem sp = new SeparatorMenuItem();
        sp.setContent(new Label("abcv"));
        ChoiceBox cb = new ChoiceBox();
        cb.getItems().addAll("item1", "item2", sp, "item3");

Trouble with MS Word for Mac 2008 file open from LaCie NAS drive after installing Mac OS X 10.9 Maverick.

Since installing Max OS X 10.9 "Maverick" when I open Word documents from my LaCie NAS drive they open as empty documents. When I copy them to my local hard drive and then open them the content is fine. Has anyone else run into this? I contacted LaCie and they said "we do not support OS X or MS Word so talk to Apple and Microsoft. I have a thread with Microsoft and here is one with Apple.
Thanks
James Anderson

I suspect that the issue with the EFI partition is unrelated to your Mac’s slow performance. I have had this same error message with Disk Utility. The EFI partition is related to firmware updates, and as it is not even booted when you boot from your usual boot drive, it is not relevant. (I was able to repair the EFI partition with Techtool Pro 7 , though, but then it reappeared, which makes me think it is a bug with Disk Utility.)
I’d uninstall the following items, which are frequent flyers on the list of culprits for misbehaving macs:
Blackberry
google keystone agent
Chrome
Perian stopped being supported by the developer before Mountain Lion, so I doubt that it’s compatible with Mavericks.
I have the same 8,2, BTW, and it is very fast. I like Kappy's suggestion. If getting rid of those 4 items above doesn't fix the problem, then a clean install (and not reinstalling your old "utilities" or other junk) will.

Search help for OBJECT ID with Text Description for a query

I need to create search help for the field object text in HRP1000 - P1000-STEXT table in an infoset based on LDB PCH. Can anyone help me? I want it to appear on the adhoc query screen.
Thanks,

look at search help FC_RFCDEST. that problem has already been solved with this search help.

View all slides in timeline with text holding for duration

Hi,
I have been a video editor for 30 years and this is my first time with Flash. I'm trying to make simple 15 second Flash clips for an Infocaster digital signage system but cannot figure out how to put in the advertiser's phone #/website and keep it there for the duration of the three slide run. Also am not able to bring in Photoshop-created files where I've made the white BG transparent in order to make better text. How can I see all three timelines concurrently with the contact info field stretched under all?
Peter B

Hello,
You seem to have two Adobe ID's? But you are the same Peter?
OK, starting to understand. You really need Captivate to produce a SWF in a more easy way than with Flash. And you do not want to do it with Powerpoint (I'm not a PPT-lover either), which could be easily converted to a CP-file and then to SWF.
You were showing sort of a timeline (have you video past in mind), but do know that you do not really have to put everything on one slide in Captivate. To know what is the most easy way, I'll try to summarize in CP-language and have to ask some more questions:
your 'movie' will have a total duration of 15 sec
your 'movie' should start with Title 1, and image 1 in sec. 0:0; title 1 has to stay for 15sec, image 1 disappears after p.e. 5sec
image 2 replaces image 1 after 5 seconds and stays for 5sec
image 3 replaces image 2 after 10 seconds and stays for 5sec
Title 2 appears after p.e. 2 sec, has to be visible for about 10sec
Title 3 appears after 3sec, stays for 3 sec
Title 4 replaces Title 3 when it ends and stays for 6 sec
Title 5 replaces Title 4 when it ends and stays for 3 sec
Created this on 1 slide, you'll find screenshot at the bottom (did use rectangles to replace images, workflow is same). Some tips:
Go to Edit view (top toolbar), there is one slide selected in Filmstrip. Open Properties of the slide (Enter), set Display Time to 15sec
If you do not want any fadings in/out, open Edit, Preferences, go to Project, Start and End, deactivate 'Fade in on First slide' and 'Fade out on last slides' (you'll only have 1 slide)
Insert Title 1 (is called Text Caption in CP) with Insert, Standard Objects, Text Caption (or first icon on vertical toolbar at the left), format it as you wish and set it to display for the duration of the slide (on Options tab of Properties or with CTRL-E after closing Properties, with Title selected).
Insert your first image (I used a first rectangle) with Insert, Image. It will be selected, resize if necessary; open Properties (Enter, while it is selected), go to the Options tab, and under Timing, set it to display for 5 sec. Check the Transition effect and change if wanted.
Insert second image, resize, open Properties, Options, under Timing set it to display after 5 sec and for 5 sec.You could also stretch the time on the Timeline and move the object on the timeline, that is a personal choice.
Think you got the workflow by now? Here is a screenshot of the Options for Title 2:
You can Preview the Project using F4 of F12 (to preview in Browser). Even though you only have 1 slide, do not use the Preview slide, because that way of viewing doesn't compile to a SWF.
Lilybiri

Problems with Reading Word for Mac attachments

I have just 'switched' my wife from a PC to a Mac Mini. She is using Mail to send out attachments and some of the recipients are unable to read them. They are getting the message "can't start converter mswrd632". Using a similar set up with my Mac Pro I am not getting the same issues!
Googling the message I understand that this relates to a Microsoft security upgrade MS09-73 but I am not able to understand why her machine has the problem and not mine!! Both appear to be sending .doc suffixed attachments.
As the Mac champion in the household this is now 'my fault' and any guidance would be welcomed.

Are you sure that your wife is actually sending out Word documents? The error is due to a document having a ".doc" suffix but is really a text file.

Problem with ms word for mac 10.6.8 with mac OSX 10.6.8

I am using ms word mac 10.6.8 with mac OSX 10.6.8 and two times now I have edited a document, tried to save it and it froze up. The error message is "command is not available b/c the document is in modal state" Any suggestions?

Try not to double click when you post in the Communities. Your thread became a duplicate, and an answer may appear in this thread:
https://discussions.apple.com/message/17498901#17498901

Help me out with Directory structure for JSF+SPRING+HIBERNATE Project

Hi frnds ,
My name is Walter working for a startup software company . We are working on Hospital Management System (HMS) project .. MVC Architecture ...using Hibernate Spring and JSF ..we need to design Directory Structure for our project..
plzz help me friends in suggesting MVC Directory structure ...? also plzz help me by directing me with the navigation flow?
Thnxx in advance
Regards
Walter

Thank you so much .. friends ..for your kind replies..thanks to Illu, anguquga and special thanks to BalusC for giving me the advice for hiring EE Artitech ..
Anyways I have discussed with my teammates designing the directory structure
anguquga your directory structure is close to what I have designed ..referiing to a sample application on web..
Hospital Management system MVC architecture Directory structure
This is the way the structure goes on ..
model --> for Hibernate as well as Spring
View --> for JSF
src(-)
|
------(-) java
     |
     -------(-) model
          |
          ------(+) businessobject
          |
          ------(-) dao
          |
          ------(+) hibernate
          |
          ------(+) exception
          |
          ------(-) service
          |
          ------ (+) impl
          |
          ------(+) util
          (-) view
          |
          ------(+) bean
          |
          ------(+) builder
          |
          ------(+) bundle
          |
          ------(+) servicelocator
          |
          ------(+) util
          |
          ------(+) validator
(-) Web or WebRoot
|
----- (-) JSP Files�etc.,
|
----- (-) META-INF
|
     ------     (+) Images
|
     ------     (+) Scripts ==== CSS (cascading style sheets, JavaScript files etc.,)
|
----- (-) WEB-INF =========xml files web.xml, faces-config.xml etc.,
     |
     -----(-) Classes
          |
-----(-) HMS
|
               ----- (+) model
               |
               ----- (+) view
|
----- (+) lib
I am sure you may notice few errors .. if u find any plzz reply me back.... thnxx in advance for replies...and thnxx for giving your valuable replies...
Walter (Kaleem)

CS5 custom build with GTX 285 for long-form 4k projects

I've been researching nonstop for several days, and it's time to ask for your expert opinions. I would appreciate any help.
I'm ordering a new system for Production Premium CS5, and mostly I will use Premiere Pro CS5 to edit long-form projects (huge timelines with thousands of clips) of Red 4k footage. It's a feature film with only a few F/X shots, but we'd like to do as much F/X, sound mixing, and color correction in CS5 as possible.
Here is what I'm considering:
CUSTOM BUILD from CYBERPOWERPC (about $1950 including items not listed):
OS: Windows 7 Professional x64
CPU: Intel® Core™ i7-930 2.80 GHz 8M Intel Smart Cache LGA1366
HDD: 1TB SATA-II 3.0Gb/s 16MB Cache 7200RPM HDD (Single Hard Drive)
MOTHERBOARD: * (3-Way SLI Support) GigaByte GA-X58A-UD5 Intel X58 Chipset SLI/CrossFireX Ultra Durable™3 Mainboard DDR3/1600 ATX Mainboard w/7.1 Dobly Audio,eSATA,Dual GbLAN, USB3.0, 2 x SATA-III RAID,IEEE1394a,4 Gen2 PCIe,2 PCIe X1 &1 PCI [+132]
MEMORY: 12GB (2GBx6) DDR3/1600MHz Triple Channel Memory Module [+219] (Kingston HyperX)
SOUND: Creative Labs SB X-Fi Xtreme Audio 24-BIT PCI Sound Card [+48]
VIDEO: Nvidia GeForce GTX 285 (I will have to take out their card and install this myself for GPU acceleration)
1. Do you see any poor or strange decisions?
2. I liked that mobo because of the chipset's possibilities and because it has 1394 for old-style DV capture. Plus it has 8 SATA 2.0's, 2 SATA 3.0's, 2. eSATA 2.0's, and 2 USB 3.0's for huge/fast storage options in the future. Is there some better alternative if I'm keen to have at least one of each of these formats?
3. I'll clone their 1TB OS drive onto a smaller 250GB drive to use as the OS drive, then use their 1TB drive as part of a 2TB RAID 0 video storage. Will using the mobo's raid controller or some type of virtual RAID (like I did in Xp64) be fine, or do I need a separate RAID controller (like I had in the late 90's).
4. What do you think about that processor and RAM for what I'm doing? Any reason to prefer 2 Quad-Core's (if dual processors are even compatible with CS5)? Please let me know if the current configuration will lag with huge timelines with thousands of 4k clips.
5. Maybe I don't need the Creative sound card and could just use the mobo's sound?
6. Will it be simple for me to remove their graphics card and install an Nvidia GeForce GTX 285 myself?
7. The Nvidia GeForce GTX 285 seems like a good fit for GPU acceleration for me since I'm not expecting to have 4+ layers of videos, though I will be doing multiple effects on 1 or 2 layers. Would having a Quadro FX give any advantage over the GTX 285 for huge timelines with thousands of 4k clips? Or any advantages for any other use?
8. The GTX 285 has 2 DVI's as its only connectors (plus something that looks like S-video). Can I use one DVI for my workstation and one DVI for monitoring video in realtime on an HDMI/DVI-equipped LCD TV or professional HD video monitor. Any problems with viewing/outputting my 4k video in HD in realtime? What is the best setup to view your video on an external monitor? Back in the CS2 days I used a 1394 through a camcorder into an analog professional monitor, but that's not going to be HD, plus I heard there's a sync problem these days.
Thanks for your advice.

Thanks for your advice, everyone!
I'm gaining a lot of knowledge, but I have some followups so I'll break it down into subcategories and hopefully you can chime in on one or more topics.
To give more info about my daily use and purpose:
--smoothly edit huge amounts of RED 4k footage/clips and view the video externally in as high a resolution as possible (2k or minimum of 1k).
---no reason to have more than 3 layers visible at a time.
--the vast majority of the time only 1 video layer (with video effects) will be visible, with perhaps a handful of fades/dissolves during the entire 2-hour feature.
--I don't mind if it takes slightly more time rendering DPX files at the end, but I don't want any hiccups and never want to render during day-to-day editing and monitoring.
GRAPHICS CARD and VIDEO MONITORS
1. I'm pretty much set on the GTX 285, but I wondered if for my purposes I'd get any significant benefit from the Quadro FX 5800 (+$2000-$2600) or the GTX 480 (+$100)? Either in speed of playback or in output to external video monitors. The 5800 has 4GB RAM versus the GTX 285's 1GB, and the GTX 480 has 1.5 GB. Does this RAM matter for what I'm doing or are the cores much more important? Also, if I chose the GTX 480 then I'd have to pray that everything would be stable with a MPE/CUDA/GPU-acceleration hack, or hope Adobe comes through with full support of that card.
2. What is the 3rd output on the GTX 285? There are two DVI outputs and then something that looks like S-Video. Is it S-video out? Or an HD audio out that travels alongside the DVI output to an external video monitor?
3. Does it slow down the system to send the video at 1k or 2k to an external video monitor since you'd be using both DVI outputs simultaneously?
RED 4k PLAYBACK and RAM vs CPU
1. For day-to-day editing, I'm fine scaling to 1/4 resolution if necessary and monitoring video externally at 1k or 2k. Would my current system already achieve that smoothly?
2. From what I've gathered here and elsewhere, for better 2k or 4k playback it might be better to spend extra on CPU rather than RAM. I could spend
--$1000 more for 24GB RAM (instead of 12GB)
--$290 more for an i7 975 Extreme 3.33 GHz 8M Cache
--$686 more for an i7 980x Extreme 3.33 GHz 12M cache.
Given my needs and the current total system cost of $1950, which of these 3 would you choose? Or should I stay with the cheaper i7 930 2.8 GHz and overclock (which I've never done before).
ECBowen:
It sounds like you've used a system similar to what I'm buying to playback RED 4k on a timeline in full, 1/2, and 1/4 scale. I'd greatly appreciate if you could clarify YES/NO for which are possible to have SMOOTH PLAYBACK with your 980x/12GB RAM/GTX 285 system. I know it's a lot to ask, but it would make me feel so much better about this big purchase:
-full scale 4k of 1 layer with 0 video effects
-full scale 4k of 3 layers with 0 video effects
-full scale 4k of 1 layer with 3 video effects
-full scale 4k of 3 layers with 3 video effects (NO, right?)
-1/2 scale of 1 layer with 0 video effects
-1/2 scale of 3 layers with 0 video effects
-1/2 scale of 1 layer with 3 video effects
-1/2 scale of 3 layers with 3 video effects
-1/4 scale of 3 layers with 3 video effects
RAID CONTROLLER
1. I won't use the virtual/software controller. The GigaByte UD5 says it has RAID 0, 1, 5, 10. Does that mean it has an onboard hardware controller that I can configure in Windows 7 or using some software supplied with the mobo?

Why JTree node display text with uncomplete word with ...

Some nodes with short word, for example Header, display uncompletely with ..., while some nodes display text with complete word which has more letters, for example Substation.
Why?

If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Issues in making label selectable when used with text area

I have used the following code (which was given in the thread : Re: Making Labels and other controls with text selectable for copy&paste ]
which shows how to make label selectable with text field. )
public class TrialArea extends Application {
>>public void start(final Stage stage) throws Exception {
>>StackPane layout = new StackPane();
>>layout.setStyle("-fx-background-color: cornsilk; -fx-padding:10; -fx-font-size: 20");
>>
>>Label label1 = (new Label("jqhrjhhhhhhdsfdsfdsfdfdsdsfsdfdsdsdsfsddsdsdfsdfsddsfsfsddsfdsdedsfssdfhhhhhhhhhhhhhhhhhhhhkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n "));
>>
>>label1.setWrapText(true);
>> label1.setPrefWidth(480);
>>label1.setMaxWidth(480);
>>layout.getChildren().add(
makeSelectable(label1)
);>> Scene scene = new Scene(layout);
>>stage.setScene(scene);
stage.show();
/** @return the passed in label made selectable. */
private Label makeSelectable(Label label) {
StackPane textStack = new StackPane();
TextArea textField = new TextArea(label.getText());>>
>> textField.setEditable(false);
textField.setWrapText(true);
textField.setStyle(
" -fx-background-color: transparent; -fx-background-insets: 0; -fx-background-radius: 0;"
);>>
>>
// the invisible label is a hack to get the textField to size like a label.
Label invisibleLabel = new Label();
invisibleLabel.textProperty().bind(label.textProperty());
invisibleLabel.setVisible(false);
>> textStack.getChildren().addAll(invisibleLabel, textField);
label.textProperty().bindBidirectional(textField.textProperty());
label.setGraphic(textStack);
label.setContentDisplay(ContentDisplay.GRAPHIC_ONLY);
return label;
public static void main(String[] args) {>> Application.launch(args);
>> }
}The issue I am facing is that with text area, the scroll bar is visible, which does not go with label. The label is being selected properly, but how to remove the scroll bar?
Edited by: Amrita Dasgupta on Mar 11, 2012 11:38 PM

DVD SP is not Flash or Director and it sounds like you using "hotpots" are thinking more along those lines. If someone puts the DVD in a DVD Player they may get rather frustrated having buttons that do not do anything and the navgation is strange
Also take a look here for some more pitfalls and why another app may be better for you
http://discussions.apple.com/thread.jspa?messageID=1085629

Self Learning Oracle Financials

Hi all,
I am presenly working as a software engineer (Oracle Developer(D2K) ,Oracle Dba). Now i want to work in Oracle Financials (ERP). So for that i am thinking for doing Self Learning for that .So can any body suggest me eBooks or links from where i can get the details of Oracle Financials as biggener.
Thanks In Advance

How about you start by taking free video tutorials at http://handsonerp.com and see how you feel about ERP.
Regards

MS Word for Macs 2011 in Mavericks - can you help with text formatting?

When I try to copy and paste text in MS Word for Macs 2011 (14.3.9) the text doesn't retain its formatting. I'm running a year old 27" iMac with OS 10.9.1 Mavericks. My other Mac is still running OS 10.8.5 and the same verision of Word works fine.
Any ideas?

Works fine, here.
I've found it difficult to actually nail down what causes the odd behaviors in Office. I think it is due to the config files scattered all over, never knowing which one to delete.
However, you may be able to isolate the problem to your own account, or to the system by trying two things:
1) Log into another user account (a new one would be good, or Guest) and try there.
2) Boot into Safe Mode and try there: http://support.apple.com/kb/HT1564
If it works in 1, then there is something in your account causing the issues.
If it works in 2, then the something is third-party software.

Voice synchronization with text(words) for a self learning project.

Similar Messages

Maybe you are looking for