VOICE SYSTEM ERROR on N95... known problem with un...

Sudenly, my voice commands stop working. When I press right soft key I get a NO VOICE TAGS SAVED. When I try to playback and application and the Voice Command soft, I get an VOICE SYSTEM ERROR.
There are a lof of post about and I read almost ten of them. None of them, with a solution which does not required reapplying firmware or a hard reset.
Does anyone have an idea of how to get this fixed?
Información sobre Symbian / NSERIES en Español en http://symbianespanol.wordpress.com

HARD RESET. The only solution I found.
Información sobre Symbian / NSERIES en Español en http://symbianespanol.wordpress.com

Similar Messages

  • "Voice System Error" on my N95!

    Hi, I am not able to use voice Recognition dialing with my Nokia N95 as I get this error : "Voice system Error".
    This occurs when I long press contacts for example.
    Does anyone know how to resolve this problem?
    Thanks,
    GN

    I've just fixed a similar, but not identical, problem on my N95 .  This fix is quick and easy and doesn't need a firmware install, hard reset or rebuild.  Here's what I posted to another forum:
    Managed to figure out how to fix this on my N95 with a bit of research and tinkering... 
    First, select Tools / Utilities / Voice Comm. / Settings / Remove voice adapts.  Then selectTools / Settings / General / Personalisation / Language / Phone Language and set it to another language.  You'll be asked to restart the phone.  Once restarted, remove the voice adaptations again.  Now change the language back to your own and restart again.  Then reset the voice adaptations again.  Now try the voice command button again - it should work.  I think the resetting voice adaptations bit may be unnecessary, but definitely the language change is what sorted it for me.
    Failing this, try turning off the voice synthesiser in voice command settings.  It will still take voice commands but won't read stuff out.
    Pleased I fixed something for once, without the need for a hard reset and rebuild.  

  • VOICE SYSTEM ERROR

    Hi,I have a problem with my N8,when headset is connected or we go for voice tag its shown with message "VOICE SYSTEM ERROR ". Need to re connect or restart the phone for the headset to work. Sometimes it wont. Voice tag is not at all working. I hope Nokia to have a look in to this error and give a solution as soon as possible. Am using original headset provided by Nokia.

    i am getting the same error message in N8 "VOICE SYSTEM ERROR" and not able to use the FM tranmitter option

  • SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

    Hi SAP Guru,
    We have configured ADOBE for separate ABAP server and Java Server.
    But when I am execution report FP_TEST_00 getting below error
    ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
    FP_CHECK_DESTINATION_SERVICE
    FP_CHECK_HTTP_DATA_TRANSFER giving error
    SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
    But report fp_pdf_test_00 is giving postive response.
    I have troubles hooted according to note 944221 , my configuration is ok but no success.
    Please help to resolve this issue.

    Hi,
    Check your ADS Connection .
    Do one thing
    Go to T-code "SM59"  -  "RFC Destinations (Display/Maintain)"
    select "HTTP Connections to External Server" - > ADS
    Double click there and check the all the settings " Administrations "  ,  Technical setting , Logon and security , Special option .
    Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

  • OneNote 2013 throwing error: There is a problem with your account. Please try again later on Windows 8.1

    Hi
    I had Windows 8 installed on my corporate laptop till last week and as the OS crashed, I have re-installed the system with 8.1 and it has Office 2013 installed with my corporate ID. It is signed in Corporate credentials by default. But when I am trying to
    use Switch Account option and trying to login with my Microsoft ID to sync my notebooks, it throws an error : "There is a problem with your account. Please try again later".
    Note that My Microsoft is active and i am able to access the pages online.
    Pls help with me with a resolution

    Hi Raj_Tan,
    Thank you for posting this issue on the TechNet community forums.
    From the description I understand that you're having problems signing into OneNote 2013 with your Microsoft account and that it's giving you an error: "There is a problem with your account. Please try again later". You mentioned you are able to
    access the pages online.
    Could you please try the following:
    Check if you are able to login to other office apps with your Microsoft account.
    Check if you are able to login to the OneDrive app using your Microsoft account.
    Try emptying all saved passwords from the credential manager:
    http://windows.microsoft.com/en-GB/windows7/remove-stored-passwords-certificates-and-other-credentials
    Although this link applies to Windows 7, the process is the same in Windows 8.

  • Nokia 5300 XpressMusic voice system error!

    Hello everybody
    i just got a brand new nokia 5300 XpressMusic today
    i tried all its functions at was very good untill i
    decided to try the voice commands and i did as the manual
    said i pressed the lower volume key until the tone came
    then a littile screen shown up in the mobile screen
    with "Voice system error" is there an update to fix that
    or what to do?

    Thats very odd for a brand new phone.
    Return it if you can or use the link below to see if there is a firmware update available for it:
    www.europe.nokia.com/softwareupdate

  • 3110 Classic voice commands - voice system error

    Hi.
    When i press the "go to" button to give a voice command the message VOICE SYSTEM ERROR appears.
    Please help.

    Here's a quick solution that I found for the problem on the 3500 Classic where the "play voice tag" command did nothing and contact voice tags didn't work.
    It might work for other phones.
    Open up Contacts > Move Contacts
    Select either:
    From phone to SIM card
    OR From SIM card to phone
    whichever one is not greyed out. If both are available then I guess either one would do. Then let the phone carry out the move for a few seconds and cancel it. It should display how many contacts it moved and which direction they moved. Then simply select the opposite command to before, so that everything is back to how it was. There is no need to move the entire phone book.
    I found that the contact voice tags now played back and also worked when holding the right selection key from the main screen.
    I am not sure if this is a permanent fix, infact I doubt it but it does seem to work. Hopefully this bug will be fixed in a new software update. Current version is V 05.51

  • ENVY 7640 error "There is a problem with this printer"

    Hi guys. I got this printer 4 months ago and it has been working marvelous. But this weekend when I turned it on the error "There is a problem with this printer" appeared, just after it connected to my wifi network.I made several tests and the error comes only if the network is connected to the internet.When it is not connected to the internet the printer works fine (prints, scans, all via wifi).I have a MAC and an AirPort Time Capsule.Is there any set up that solves the problem?

    Hi , Welcome to the HP Forums! I see that you are getting the error message, "There is a problem with this printer," with your HP Envy 7640 on Mac OS X 10.10. I am happy to help!  Is this error message showing on the printer's display screen, or on the computer screen? If the error is on the computer screen, try resetting the print system. If the error is on the printer's display screen, please try a hard reset, by going to this post, How to perform a Hard Reset, by . It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. I would also double-check that your printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Apple software update 2.1.3 is giving error  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."

    Apple Software Update 2.1.3.127 will not install i keep getting the error
    “There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personnel package vendor. ”
    i have tried to uninstall itunes and reinstall and i can not get it to install

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error: there is a problem with Adobe Acrobat/Reader   If it is running, please exit and try again.

    I keep getting this message when trying to open a file.
    Error: there is a problem with Adobe Acrobat/Reader   If it is running, please exit and try again.

    I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again

  • When installing itunes 10 uding windows xp I get the following error: "There is a problem with this Windows Installerpackage. A program run as part of the setup did not finish as expected. Contact your sipport personnel or package vendor." - any ideas?

    When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?

    using MSICUU2.exe didn't help me.  But,  the new replacement app did:
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    I fixed my problem like this:
    Here's the deal - 
    1.  can you install itunes via the APPLE SOFTWARE updater?
    I couldn't  so I downloaded ITUNES and tried to install it that way.   Hence  I got the same error hang as you.  Nothing worked,  (Multiple attempts at uninstall reinstall,  stopping of Services,  Reg cleaners  etc..)
    2.  If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program. 
    OK  so I couldn't find a Download for this.   But:  if you have WINRAR,  open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file.  Execute the APPLESOFTWAREUPDATE.MSI separately.   And you will not be able to install it and have a similar issue as per your Itunes install.   This of course leads you to believe that the Itunes.exe  install is also installing all of these components including the applesoftwareupdate silently.   It must BOMB at that portion of the install and you are done. 
    3.  Your goal now is to get the applesoftwareupdate installed.   How do you do this.  Well -  here is what I did.
      a.  downloaded and RUN a PC  Installer FIX it tool from Microsoft.  This is a replacement for the older MSI fixer they used to use.
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    b. It will list programs to attempt to fix.
      choose  AppleSoftwareUpdate.msi
    c. Once it is done,  then reinstall apple program updater using
    AppleSoftwareUpdate.msi
    Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
    (Please note:  that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN:  services.msc to get there -  although this man not be necesarry.)
    Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu)  it should list ITUNES
    select ITUNES from here and it will update.
    KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program.  If that program is not working fix it.  Then Bingo.
    I am sorry to see folks having this problem for weeks.  
    APPLE,   Spread the word.  PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update.  etc...   Please improve your software updater program to check for invalid registry upon launching the app.  This will prevent people thinking it is an APPLE issue.  It appears to be a problem on your PC's registry settings for the APPLE Software update.
    Bruno Ricci

  • Error: "There is a problem With Adobe Acrobat/Reader..." What is .MST file??

    I get the following error message and I looked it up in the knowledge base, and there was a solution for fixing the error message. However, I have no idea what they are talking about. I have downloaded the Customization Wizard, but I have no clue what the following means:
    A) Create a new transform
    B) Open your previously created .mst file
    I went into the C Drive and opened Program Files. I found the Adobe folder, but I couldn't find an .mst file anywhere. Am I completely lost??? Below is the knowledge base solution:
    Error: "There is a problem With Adobe Acrobat/Reader..." when you view a PDF in a browser (Acrobat and Adobe Reader 8 on Windows)
    Issue
    When you try to view a PDF in Internet Explorer, you see the error message, "There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." When you click OK to the error, the PDF opens outside of the browser.
    Reason
    When you use the Adobe Customization Wizard to create a transform for Adobe Acrobat 8 or Adobe Reader 8, and you choose the option to "Make Acrobat the default viewer if both Acrobat and Reader are installed", or "Make Reader the default viewer if both Acrobat and Reader are installed", an error occurs if the computer does not have Acrobat or Reader already installed.
    Solution
    Create a new transform and re-deploy Acrobat or Adobe Reader.
    Start the Adobe Customization Wizard 8.
    Open your previously created .mst file.
    Under Installation Options, select "Installer will decide which product will be the default".
    Save the transform.
    Re-deploy Acrobat or Adobe Reader.
    Additional Information
    When you create a transform in Adobe Customization Wizard 8, the installation options allow you to set the default viewer for PDF files. "Installer will decide which product will be the default" is the default setting and should be used when you are uncertain if the target machine has a version of Acrobat or Adobe Reader that won't be removed as part of the installation process. When installed silently using this option, Acrobat will always be configured as the default viewer.

    I think you are headed down the wrong path. The Customization Wizard is what you use to push out Reader to several hundred computers. An MST is a package or transform file that is used to accomplish this task. Unless you are an IT person and are trying a deployment of Reader this solution does not fit your situation.

  • Upgrade to version 10.5.x, error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??

    Hi; Attempting to upgrade to version 10.5.x, but I keep on getting an error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??
    Needing to upgrade to allow connection of a 4S iPhone to the Laptop.
    Thanks!! - Tim.

    Repair your Apple Software Update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you can't find ASU in all program, you can do it in CONTROL PANEL, ADD N REMOVE PROGRAMS.

Maybe you are looking for