Voicemail access number deactivated bluetooth device

Using my iPhone 4, I can gain access to my voicemail by directly dialing my carrier access code (i.e. *138 in my case) through the keypad AND listen through my bluetooth device. But when using the "Voicemail" button (leftmost docked button), I can still access my voice mailbox BUT can no longer listen through my bluebooth device. Strange! Is there anyway I can change the preset access code stored under the "Voicemail" button?

if it is the iPhone 4, then *5005*86*xxxxx# where xxx is the nmber you want to programme should work...
but 4S and 5, unknown... anyone?

Similar Messages

Voicemail access number?

When I try to find out the number I need to call to access my voicemail at this address
http://www6.verizon.com/vmlookup/vmlookup.asp
I get this
No web site is configured at this address.
Any other ways to find out the number?

You can dial your own phone number and then press the "*" key when the recording starts.
It is different in each are, but I can also dial (Area Code)First Three Numbers-9477.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I have a number of audiobooks purchased through iTunes on my iPod touch. Is there a way to move or download them to the Cloud so that I can access them on other devices?

I have a number of audiobooks purchased through iTunes on my iPod touch. Is there a way to move or download them to the Cloud so that I can access them on other devices?

Thanks - I didn't realize that. I'm also embarrassed to admit that I don't know how to transfer the audio files from my iPod to the iTunes library on my computer. When I select a book from the list on the iPod, the only option I see with the right-facing arrow symbol is "Show in iTunes Store ". I back the iPod up to this computer so I guess those files must be on it somewhere, but all I can recognize in the iTunes folder under " Music" are the music files found in the "iTunes Music" folder. (There are also a ton of files named "iTunes Temp (some #).) The Books list on the computer shows some but not all of the audiobooks - I purchased the rest on a different computer that is now unfortunately dead. I'm guessing now that those didn't transfer over when the new computer was populated from the old one, so the iPod may be the only place where those audiobooks now reside. I hope that made some sense- any additional advice would be appreciated.

How do I upload the contacts from my iPhone 5S to the Bluetooth device on my Toyota RAV4. The car manual says to consult the phone's bluetooth instruction manual, but I don't have one.

How do I upload the contacts from my iPhone 5S to the Bluetooth device on my Toyota RAV4? The car manual says to consult the phone's Bluetooth instruction manual, but I don't have a manual for that.

That is very strange... I wonder if it has something to do with the firmware or some sort of error. I haven't ran into this but at the shop I work at I've ran into several firmware errors on iPhone 4 all the way through the 5s. Maybe its something as simple as putting a different part of the code into iTunes... I know you can something of this extent. I would look up error 1669, I know you have tried a number of things but look it up on the forum and see what fixes are available so that you may be able to restore it properly without all this garbage you are running into. Just a thought for you.

[SOLVED] Unable to determine major/minor number of root device - USB

I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
:: Running Hook [udev]
:: Triggering uevents...done.
ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
for device /dev/disk/by-uuid/[the uuid] ...
/dev/disk/by-uuid/(the uuid)'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[ramfs /]#
So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
# mkinitcpio -p linux
So I plugged it back into the laptop, booted it, and got the same error.
Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
# sudo fdisk -l /dev/sdg
Disk /dev/sdg: 500.1 GB, 500107861504 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00016b3d
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 208844 104391 83 Linux
/dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
/dev/sdg3 4417875 209230559 102406342+ 83 Linux
/dev/sdg4 209230560 976768064 383768752+ 83 Linux
Screengrab of my VirtualBox storage setup (just for giggles):
My /etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
# Tried this line instead -- didn't work either
#HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
HOOKS="base udev usb sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
My GRUB menu.lst:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by UncleNinja (2011-12-02 15:33:21)

UncleNinja wrote:
skunktrader wrote:https://bugs.archlinux.org/task/27385
Perfect! Thank you!
Would it be safe to copy over the version from HEAD into my mkinitcpio?
EDIT: nevermind, derp derp the package is updated
EDIT again: Actually, it's not.
I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
Thanks guys!
Last edited by UncleNinja (2011-12-02 15:35:20)

How do I find the MAC address of a paired bluetooth device?

I have just connected a bluetooth device to my MacBook. When it was pairing, it displayed the MAC address of the device, but a few seconds later, the MAC address was replaced with a test description of the device. I need to figure out what that MAC address was.
For clarification, this is not an ethernet connection, it is Bluetooth. The device is a type of headset, it has no use accessable interface, and no the address is not on the device itself.
Thanks,
-- JC

Open System Preferences > Bluetooth
Select the device on the left.
Then click the asterick with a downward facing arrow then click More Info.
The Addrress will show on the right.

Bluetooth devices state they are disabled since upgrade to 10.2.1.537

Hi
We have had (including myself) several users in my company that have upgraded their devices to this latest software.
Since the upgrade we can no longer use Bluetooth devices. We are getting the message that Bluetooth has been disabled by your administration.
Our BB10 devices connect via ActiveSync and we do not have any policy via ActiveSync dealing with Bluetooth.
Who do we correct this "Policy" that doesn't exist that is blocking Bluetooth use?
Solved!
Go to Solution.

I can pair to my vehicle (MB E350) but when I turn off the radio or restart the car it will not pair. It shows profiles in both phone and car but they will not pair. I have had to delete both bluetooth profiles on device and vehicle and start the pairing process again. This happened when I upgraded 10 10.2.1.537. I have opened a case ID 27343869 and was given a phone number 877-255-2377 to folow up. They did work diligently with me yesterday (over two hours) to reset my Z10 back to factory setting but it retained the latest 10.2.1.537 software. This did not fix the problem. I will work with them to downgrade to the previous version. Or see if they develop a fix on this upgrade. It's a problem. I suggest you tag onto my case ID and continue to push.
I have checked with my IT group and our policy setting for Bluetooth has always been set to allow. Could this issue only be with MB cars? I am on the phone with Blackberry now working through this case. I will update as I hear.

OVI Suite can't find a bluetooth device in my Note...

hai,
i bought a new laptop a couple of weeks ago .. (HP Pavilion dv6-3177ee)
it comes with bluetooth version 3.
i installed ovi suite and pc suite .. but when i try to connect my phone via bluetooth , it gives me the next massege :
"Bluetooth is turned off or unavailable on your computer . Turn on Bluetooth or or refer to help ..."
I checked the bluetooth .. and it's ON .. I tryed to send a file via blutooth to my phone and it's sent.
the blutooth device name is :
Ralink/Motorola BC4 Bluetooth 3.0 + HS Adapter
and I have the latest driver for it...
can anyone help please...
here are my data :
PC Connectivity Solution:
Version 10.43.0.0
Nokia Connectivity Cable Driver:
Version 7.1.36.0
Operating system:
Microsoft Windows 7 64-bit Edition
Language: English
Language for non-Unicode programs: العربية
Detected Internet browsers:
- Microsoft Internet Explorer 8.0
- Mozilla Firefox
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385)
==========================
I've contacted with HP customer service .. they said as long as I can send and recieve files via my bluetooth .. then it's a (Nokia PC Suite)'s problem!!!
any suggestions?

this is the answer to your issue....
the problem is not the Nokia PC Suite.... it is HP that is to blame for adding such slopy hardware that is built not to be usable by other external software.. i have a HP Probook 4530s and it uses the same but newer version, bluetooth hardware Realtek Motorola BC8 Bluetooth 3.0+HS Adapter that has to use motorola software...this motorola software is able to connect to my phone via bluetooth and acts like a built-in nokia pc suite / Windows bluetooth driver... not allowing the actual nokia pc suite access to the bluetooth hardware... in short nokia pc suite is Incompatibile with Ralink / Realtek Motorola BC4 / BC8 Bluetooth 3.0+HS Adapter... so if you have this problem ask HP to come up with new software that works on the motorola hardware that is compatible with nokia PC suite... this is the problem with products that have parts built by other companies.. (Incompatibility)
thats why i like Apple and nokia they dont out source other brands to make parts... but recently nokia ran to microsoft for the lumia windows cause there symbian software was loseing against ios and android..

After updating to 8.1 unable to play audio via bluetooth devices!

While ysing windows 8, i had no such problem. but after i updated it, i am unable to play music via bluetooth devices. sometimes it gives error message "DRIVER ERROR", while other time it gives no error message while it doesn't work. What should i do to check it??

Hi karankishore007,
Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help with your Bluetooth issue but I will need some additional information. What is the product number for your notebook? When you check under your Device Manager what do you have listed under Bluetooth or Network Adapters for Bluetooth?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Broadcom bluetooth drives installation failed, no bluetooth device was detected.

hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.

fixed !!! now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers... in pic you can understand that i am not using latest version of bluetooth drivers.

What is the Bluetooth device in the HP Touch Smart TX2-1275 DX ?

Friends, I want to know what is the Bluetooth device in the HP Touch Smart TX2-1275 DX ? Im asking the manufacturer brand and model number such as Ralink xxx, Broadcom xxx and so on for this laptop not the Software Support for HP Integrated Module with Bluetooth Wireless Technology for Microsoft Windows Vista driver. If anyone knows, can you please provide me the link to download it? My friend reformatted it without taking note of the original device name in the device manager. I appreciate your help friends, Thanks You.
This question was solved.
View Solution.

Check specification of your model here.
This tablet is without bluetooth module.
You may buy usb micro Bluetooth adapter.
With that kind of device you don't need to even remember then it's plugged.
Few propositions on Newegg: here, here, here, here and here.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

Bluetooth Device/HP Notebook TX2-1270US

I'm wondering, I had to reinstall Windows 7 Home Premium and now the Bluetooth device is not showing in my device manager or in the system... The computer & all parts are functional - is there a driver for this to be operational or what? Any help would be appreciated.

Hello DimtrijShal:
         Sorry to hear about Windows 7 failer. Are you able to do a full recovery using your orginal recovery disk? If so please back up all the files you have before doing it. Write down the Windows 7 product code also. We will need it ounce you have vista windows reinstalled. You can find it in the package it came in or in the control panel displaying computers information. This number is also none as product key.
     Now that your computer has been restored to original factory condition. You are now able to update Vista Windows to Windows 7 but this time you are going to use Windows Up Advisory open it up should be listed. This time just type in Windows 7 Product Code number and let it do its thing.
       You can also goto your computers update web-page and see what's all involved in Up grading to Windows 7 they may have HP's Touchsmart software upgrades listed for downloads. Most Touchsmart software is listed. I have not yet seen any that did not display them. Yes you are in the correct section for your post. Some one need to realise HP Touchsmart tx2 are Touch computers also. So do not move your post from here. Let us know if you are still having troubles with your upgrade. Thank you frrw

Subscriber access number.. cannot change!

I'm trying to change the subscriber access number. I have Lync 2013 and I need to assign the number to a user now.
The problem is I change the subscriber access number but it still remains. I even changed the contacts associated with it. I ran updates to the address book on Lync and everything.
However I still call the number and it takes you to the Exchange voicemail!
Am I missing a place to remove this number from Exchange and Lync?

It eventually started working. Took about an hour. Don't know what happened

SPP Bluetooth devices not listed in Mac mini

Hi,
We're developiong Bluetooth supported hardware. the hardware supports bith SPP & iAP.
Works fine on any iOS device (iAP protocol)
Works fine (SPP) on an old Mac mini machine.
Works fine (SPP) on any android device.
But, on a new Mac mini machine the device won't even get listed in the Bluetooth devices list.
Old Mac mini (Device is working perfect):
OS X 10.6.8
1.83 GHz
Intel Core 2 Due
New mac mini (Device is not detected):
OS X 10.8.4
2.3 GHz
Intel Core i5
Any assiatance will be great,
Thanks,
Dan

interface GigabitEthernet5/0/24
switchport access vlan 110
switchport mode access
switchport voice vlan 250
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
end
I condensed one of the ports as follows, but it's still in the game flapping:
interface GigabitEthernet5/0/24
switchport access vlan 110
switchport mode access
spanning-tree portfast

Voicemail access number deactivated bluetooth device

Similar Messages

Maybe you are looking for