Voicemail notification stuck after reset.

Okay, I have had a notification ever since I moved my sim to an android phone, originally I had an iPhone, then an xperia Z3c, I noticed that every time I restarted the phone I would get a persistent notification which reads "New voicemail (xxxx)" x=voicemail number. After this I've moved to a S6 and the notification issue is still persistent, at the moment I have been short term fixing it by clearing the phone cache. Any ideas?

Hi Have you recently updated to Lollipop? I have checked the Android forums and it has happened to a number of peopleMaybe our android experts or could advise?Meanwhile have a look at this article here on how to remove voicemail icons.http://www.smartmobilephonesolutions.com/content/remove-voicemail-icon-android

Similar Messages

IPod Touch stuck after reset

I've got an iPod Touch 32Gb 3rd Gen, I tried updating it to iOS 4.3 (it was on 4.1) So everytime it gave me an error while Backing up my iPod (the step before extracting) So i thought, if i reset the iTouch from the Settings, it won't try to Backup. So from the Settings Menu on the iPod, I reset it ( full hard reset, media included )
Now after the reset, the iPod refuses to start up, just keeps showing the Apple logo (with a loading circle sign on it).
Tried putting it into Restore mode, but it keeps going back to the same screen.

I was having the exact same problem with my Ipod touch, finally I figured out the problem after having tried all of those troubleshooting links, 1st I went into the start menu then right clicked on My Computer, then clicked manage. Then once I got into computer management I clicked on Device Manager, and at the bottom of the page I clicked the on Universal Serial Bus Controllers, it should say apple Mobil device right underneath, once you get there leave this page open. Open up itunes, connect ipod then hold the on/off switch and home button until itunes asks you to restore your ipod. Click restore, and it may say also say update and restore if so click on it. Then while it tries to restore your ipod click back on computer management and keep an eye on the apple mobil device USB port, you should get a warning that pops up next to the mobil device port, if you do double click on the apple mobil device and click reinstall.
Sorry this is so long and drawn out I hope that it helps.

Stuck after resetting!!!!

so, it was bluetooth issue, and thought it might be helpful to hit "forget this device" the the bluetooth headset i had been using, because for some reason it wasn't pairing w/the new one i wanted to try. because it wouldn't pair, and i was in a hurry, i then tried to re-pair w/the one i had told it to forget...... this was impossible and i read on another forum a common problem, and that the work around was to go to general settings, and reset setttings. i did that, when given the option to set up as new phone, restore through icloud, or itunes, i chose itunes. it has now completed syncing through itunes, but it won't let me move on! i have no "next" button option! i can't use my phone at all right now. when i hit the home button my options are "emergency call, start over, wi-fi settings" and i've already re-entered the wifi information.... ????? help!!!!!!!!!
thank you in advance for any advice
g

SAMMME PROBLEM I WAS ACTUALLY GOIN 2 MAKE AN APT TO MEET WITH A TECH. HAS ANYONE HAD ANY LUCK GETTING THIS FIXED. I WENT INTO THE APPLE STORE AND TALKED WITH SOMEONE AND TOLD THEM THE PROB. AND TOLD THEM THAT I TRIED TO USE THE TROUBLESHOOTING TIPS FROM THE SITE BUT NOTHING WORKED AND THEY SAID ITS PROB AN INTERNAL HARDWARE PROB. AND IT WOULD COST LIKE $175 TO FIX IT IF THAT WAS THE PROBLEM BUT I WOULD HAVE TO MEET WITH A TECH TO BE SURE. YEEAAAA SO IM PRETTTTY UPSET B/C I DONT INTENT 2 PAY $175 TO FIX AN IPOD WHEN NEW ONES ARE $200 AND I DEF, DONT INTEND TO SPEND $2OO DOLLARS EVERY 2 YRS TO BUY A NEW ONE. IM PISSSSSED BUT I WIL LET EVERYONE KNOW HOW IT GOES I TIHNK IM GOING TODAY!!!!

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

Phone won't make outbound calls now. In a hotel and unable to call support cause my cell PHONE DOESN'T WORK anymore. this was after 17 minutes on hold and asking for my 4 to 48 hour voicemail notification delay to be fixed. rep said it was and to turn pho

Phone won't make outbound calls. can't call verizon support. this after being on hold for 17 minutes in an attempt to fix voicemail notification. this is a nightmare and Verizon is unreachable. Any way to get Verizon wireless to fix my service when they can't be called (because their phone service doesn't work)?

Well 1, I guess it's not that important to you, 2, customer support generally closes at 11pm in the time zone you are in, 3, toll free and local calls are free in hotels, 4 there is limited support after hours.

Dot11Radio0 stuck in reset status after changing the station role

Hi Everyone.
I've got a AIR-AP1231G-A-K9 router. IOS has been upgraded to the latest version c1200-k9w7-mx.123-8.JED. Everything worked fine before I change the station role from root to repeater or workgroup bridge. Following is my configuration:
ap#sh run
Building configuration...
Current configuration : 1224 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$KHHu$bN/odUmHdmb.0cwa57GYs1
ip subnet-zero
no aaa new-model
dot11 syslog
dot11 ssid Lanyard
authentication open
username Cisco password 7 123A0C041104
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid Lanyard
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 11.11.11.1 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
bridge 1 route ip
line con 0
line vty 0 4
login local
line vty 5 15
login
end
ap#sh ip int bri
Interface IP-Address OK? Method Status Protocol
BVI1 11.11.11.1 YES NVRAM up up
Dot11Radio0 unassigned YES NVRAM up up
FastEthernet0 unassigned YES NVRAM up down
ap#
Then I changed the station role
ap#conf t
ap(config)#int dot 0
ap(config-if)#station-role repeater
ap(config-if)#end
ap#sh ip int brie
Interface IP-Address OK? Method Status Protocol
BVI1 11.11.11.1 YES NVRAM down down
Dot11Radio0 unassigned YES NVRAM reset down
FastEthernet0 unassigned YES NVRAM up down
ap#
Interface Dot11Radio0 stuck in reset. No matter I reload or powercycle the AP, I still get the same reset status on Dot11Radio0.
Please help! Any input will be appreciated.

In order to get either the repeater or the workgroup bridge functionality working, you would likely need to have a Cisco AP as root. This is because the repeater and workgroup-bridge functionalities require Cisco Aironet Information Element (IE), which requires a Cisco root AP. There is no standard for interoperability for these functionalities (not part of any 802.11 standards). You can always try to connect them, making sure that they are using the same authentication/encryption configuration. However, it is unlikely to work.

Voicemail notifications not working for iphone 4s

voicemail notifications not working for iphone 4s

I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have) but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

Voicemail notifications and visual voicemail stopped working

On September 17th (a few days ago) my phone stopped giving me voicemail notifications and visual voicemail. I have tried restarting my phone, resetting, resetting "all settings" and even calling 611 (I was put on hold for 15 minutes and just gave up thats AT&T service for you).
The all other notifications like recent calls and mail work just fine. I can retrieve my messages by calling my own phone number. How do I get my voicemail notifications and visual voicemail to work again?
Thank you for your help.

I found a solution. http://discussions.apple.com/message.jspa?messageID=10213066#10213066
"Keveon - to fix your visual voicemail after doing tthe 3.1 update. go to Settings > General > Profile > then remove the BENM.at Call your phone, leave a voicemail and it will work!!!!!! Hope this helps"

Droid Charge has no data roaming, bogus voicemail notification

Recently traveled and was unable to use any data services while 3 hrs from home in places where I know they have 3G or 4G, like Raleigh, Greensboro, Charlotte. My husband has a Droid Incredible and his phone had 3G the entire time. My new phone had 1x or nothing. Called Vz support and they had me switch to the CMDA instead of LTE auto switching. Made minimal difference. After I switched it, the phone randomly picked up a 3G signal, but hubby's phone kept his 3G Vz signal the whole time. Also, whenever my phone is rebooted, my voicemail notification comes up saying I have a voicemail message, dated Dec. 2004! But there is no message. Happens every time my phone turns back on. Very weird. Anyway, it really is annoying to have this nice phone and not be able to use Internet or get email when I am away from home.

Tammy, welcome to the club, not a great club to be in. I and many many like you (just google up the various forums) have the same situation as you except my wife has the Verizon Iphone and I've got the Charge. More times than I'd care to mention, I have no data and she has a solid 3G signal. She's getting fed up with my ongoing line "Honey, can I see your phone for a minute". Don't bother with master resets, battery pulls, going in and out of airplane mode, switching from LTE to CDMA, they all are short term (seconds, minutes?) solutions to a far more serious issue with either the hardware, the software, the towers of a combination of all of these. Unfortunately the latest OTA software update did little to nothing for this particular issue. It did solve the mobile hotspot issue, but for me it did nothing on the more important issue of data connectivity.
I don't expect this will be fixed until the 2nd gen 4G phones come out. This is an issue with ALL Verizon's 4G phones...bar none. I've seen it in my numerous trips to Verizon stores and playing with the LG, TBolt and Charge. In fact when I went to a Verizon store yesterday, it seemed the TBolt was faring worse. I'm sure Verizon knows they've got a serious issue here and I think there's only so much they can do given the hardware they're dealing with. The fact that the OTA software update was supposed to address this issue shows that Verizon knows the issue exists. In our area (Long Island), I can't imagine any Verizon store employee with a Charge or other 4G phone that hasn't experienced this themselves.
Such is the price for being on the cutting edge.

Even after resetting apple id password still won't activate my phone

I did a reset erase all contents and settings but i'm stuck at activation lock! The iphone is mine and email is correct but even after i reset my password, IT STILL WON'T ACCEPT THE NEW PASSWORD :(( please help! Thank you.

moniiice
Re: Does reset all content and settings automatically sets Find my iphone off?
Jan 27, 2014 8:54 AM (in response to KiltedTim)
But when i sign in my icloud account on the activation lock, it still won't accept it. Even if i tried resetting my password. I believe that i use the right icloud account but still it won't activate it. I tried locating my device on find my iphone and the device was not there, does it mean my device has already been erased?(i resetted all content and settings) but why does it still have an activation lock after reset? Tried everything but still no luck :( reset apple id or password but still nothing :(

Voicemail Notifications!!!!

My voicemail notification keeps coming up even when I do not have voicemail. How do I stop this??? Help!!!!

Hi mommyof2divas,
I am sorry you're having issues with your voice mail notifications coming up but not having a voice mail when you check. Have you doing a soft reset on your device? Here's the steps http://vz.to/1hUhlqo. Give that a try and keep us possible.
Thank you!
EdW_VZW
Follow us on twitter @VZWSupport

[SOLVED] How to unload any driver(dll) at the start up after reset??

Dear Developers,
Greetings!!!
As, I am using AM335x BSP with WinCE 7. We have one vendor Wifi device and its binary images(driver installer). When we reset the target board, the modules do not reset and during the time of board booting, I found the following logs
7771 PID:400002 TID:9e0006 Warning! Kernel DLL 'rwlpsdio.dll' is registered for thread creation/deletion notification. To improve performance if you dont need thread notifications call DisableThreadLibraryCalls from inside D
7774 PID:400002 TID:9e0006 DriverEntry!!!!!!!!!!!!!
7777 PID:400002 TID:9e0006 SDIO not initialized, returning!!!!!!!!!!!!!!
7778 PID:400002 TID:9e0006 OSAXST1: <<< Unloading Module 'rwlpsdio.dll' (0x9E438000) at address 0xA7C90000-0xA7D47000 in Process 'NK.EXE' (0x87FDFAD0)
PB Debugger Unloaded symbols for 'rwlpsdio.dll'
We conclude that when we reset the device, the driver is not unloading and that why, its not releasing the resource.
My motto to solve the issue by creating an application that run at every startup after reset and unload the driver. So, that during the time of loading it, it re-loads properly..
I am searching it on google but unable to find any way so far.
ASAP reply must be highly appreciated

Dear Developers,
@balaji,
As I had read the link https://social.msdn.microsoft.com/Forums/en-US/98aa5eca-0b38-4f6e-bf7b-81cb7068422e/sdio-wifi-driver-and-prefetch-aborts-problem?forum=winembplatdev
And, in the above thread you were replying as
Hi Misbah,
NdisMRegisterMiniport sure needs to be called from DriverEntry. Can you check if NdisRegisterAdapter is present. This ideally should be somewhere in your stream interface.
I am taking a wild guess here , perhaps you can may be introduce some delay in DriverEntry , so that the stream driver gets a chance to load?.
e.g. you can use one of NdisWaitEvent functions.
All the best.
Regards,
Balaji.
As, per my knowledge, the DriverEntry is the first function that is called by ndis after loading the ndis.dll and it is responsible for registering the driver with NDIS by using
NdisRegsiterMiniportDriver.
Any how in my case, DriverEntry is called but the same function we are getting one error and that's why driver is not registered with NDIS.
We are checking SDIO interface status, either it is uo or not. If it is up then fine and if not then display warning and unload the driver.
So, in my case, the SDIO status is not up after resting the device.
Any suggestion will be appreciated????

Email notifications stuck in Mail status

Hi,
The notification mailer is up and running and we receive emails when we run the test. However, when a user goes through the application, lets say the Purchase requisition process, the process completes successfully, we see the notification in his worklist, we see the notification in the wf_notifications table with status of MAIL, but the user does not get the email notification. The email address is defined both on the employee record and on the user record. The background process is running but it doesn't pick up the notification. After a while the notification gets expired.
does anyone have any clue as to why the test notification from the mailer works but we don't get an email when we go thru the requisition process although it completes successfully ?
Any help is appreciated.
Regards
Preeti

There are various aspects to troubleshooting this issue.
Let me explain the mailer architecture in a nutshell and then troubleshooting tips.
1. Notification activity in a workflow process is executed by the engine. The activity makes an entry in WF_NOTIFICATIONS table with appropriate values for RECIPIENT_ROLE, SUBJECT and MAIL_STATUS based on recipient's notification preference.
2. At the same time, an business event is raised for that notification and enqueued on to the WF_DEFERRED queue.
3. The Workflow Deferred Agent Listener dequeues the event, builds a XML message for that notification and enqueues it again to WF_NOTIFICATION_OUT queue.
4. Workflow Notification Mailer polls the WF_NOTIFICATION_OUT queue and when a message arrives, it dequeues it, parses the XML for that notification and builds a MIME message. Sends the MIME message to the intended recipient_role's e-mail address.
In summary the message for e-mail goes like this...
Ntf Activity -> WF_DEFERRED -> WF_NOTIFICATION_OUT -> Notification Mailer Now things to check.
1. Is the Deferred Agent Listener or Deferred Notification Agent Listener running?
2. Is the Notification Mailer running with Correlation ID parameter set to null? Because the mailer could be configured to only process e-mail notifications from a specific Item Type.
3. Is the intended RECIPIENT_ROLE's e-mail address and notification_preference values in WF_ROLES view correct? The email address should be valid and notification preference should be MAIL%.
There is a debug script $FND_TOP/sql/wfmlrdbg.sql. Run this for the given notification id and you will be able to see in which queue the message is stuck.
Hope this helps.

Unsuccessful Login Notification Does Not Reset To Zero

Dear all,
os: OUL5x64
ebs R12 12.0.6
db 10.2.0.4
when users connect to the application and login with the wrong password
On 12.0.6 in Production:
When attempting to login the applications Find that Unsuccessful login notification always
displays a cumulative count of unsuccessful logins every time. It does not reset to zero
after you successfully login.
Please advise how to fix this notification.
Thanks,

Hi,
Please see (Note: 848921.1 - Unsuccessful Login Notification Does Not Reset To Zero).
Regards,
Hussein

'New voicemail' notification issue

My iPhone 4 is showing a 'new voicemail' notification, but when I call I don't have a voicemail? Is there a way to reset the notifications or has anyone else experienced this?

There is a 3rd party program called Kate (used to be Caterpillar), which among many other things allowed you to customize the notification settings. I used Caterpillar way back when with a Jailbroken iPhone, so I don't know if they are offering their products through the legit channels now or not (mind you, it never worked consistently).
You can find them here. It looks like they are still offering this product, but may be not through the App store. You would have to install it yourself, so proceed at your own risk:
http://ripdev.com/kate
I too brought up this feature way back when I bought my first iPhone. It is simply absurd. Apple or someone else will hopefully address this ASAP.
+And as for Mr Anderson, this is not something that would be pointed out on the specs of a device. Even the simplest analog answering machine way back in the 1980's had a persistent beep to notify you if there were messages waiting for you. And EVERY cell phone I have EVER owned has had this feature, so it is perfectly understandable that those of us who find this a great omission, would like to voice our discontent.+
+As for this NOT being the proper place to ask for feature requests, you are plain wrong. Many a times there are workarounds and 3rd party solutions that we would never hear about if everyone was to simply submit their requests to Apple. Also this is a great way to find out if others share your point of view or not. Even if Apple does not officially read these forums, I can guarantee you that given enough critical mass behind an issue, they will find out about it. I know, because I happen to be a software developer and have experienced this many times first hand.+
Thank you EVERYONE for sharing and posting even if you are don't have as many posts as others...
Message was edited by: Shahin
Message was edited by: Shahin

Voicemail notification stuck after reset.

Similar Messages

Maybe you are looking for