Voiceover doesn't recognize M-Audio Projectmix

I've tried everything I can think of, but I can't get voiceover to play nice with my M-Audio Projectmix interface. VO sees the input, and allows me to select it, but I get no levels and nothing records. Garageband works fine with the Projectmix, and I'm getting levels in System Prefs.
I've got the M-Audio board in Logic mode, because that is what works best for garageband.
Does anyone have any ideas? I'm getting really frustrated. Every iteration of iMovie seems to get more and more convoluted.

Jim,
I did discover that VoiceOver treats this "Reader" window a bit differently than other windows. In most windows, once I'm in I just need to use the cursor to move around the page. In the Reader window though, it seems like I need to hold down the VO keys (Control and Option) to get the cursor to move. It's not a big deal, just a tad different. Still, this should help out my wife who sometimes gets lost in the clutter on some of these web sites she regularly goes to.
John

Similar Messages

ADOBE Media Encoder CS5 doesn't recognize LPCM audio

I have a video .m2ts with 3 audio tracks, 2 are AC3 and one is LPCM. I have created a new .m2ts file with tsMuxer with only LPCM audio track, but the audio of this file is not recognized but Adobe Media Encoder, who tells me that it has "mono" audio. Windows media player fails to recnize too, and plays no audio. Lokking at properties of the file in windows, it doesn't show any audio propertuy, like as it had no audio.
Howeaver the audio is there, because if I open this file with PoerDVD9 it plays correctly.
If I select one of the AC3 audio tracks instead that the one with LPCM with tsMuxer, the new file player correctly and is recgnized but AME. What's the problem???

any solution?
the files i'm trying to convert:
powerDVD 9 does play audio correctly
VLC media player does play the audio correctly
but WMP does NOT play audio correctly and AME does not see that audio at all
happens with:
DTS
LPCM

PulseAudio doesn't recognize analog audio plug

One day pulseaudio just stopped recognizing my analog output jack, It only lists my hdmi audio out and nothing else.
>>> list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9050
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 19.81 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
device.string = "hdmi:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100200"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-0>
I should also note that this problem is exclusive to pulseaudio. When I use regular alsa everything works.
How do I make PulseAudio recognize my headphones again?

Well that is the problem, When I use pulseaudio (I just reinstalled it) It ignores the analog audio port completely and doesn't list it anywhere.
Not in pacmd list-cards:
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
device.string = "1"
device.description = "Cypress HDMI Audio [Radeon HD 5800 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#2: Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#2: Monitor of Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
and not in pavucontrol.
It's definitely not a hardware issue, The card is recognized and functioning when using alsa.

Macbook Pro doesn't recognize audio cd's after Yosemite upgrade

After completing the upgrade to Yosemite, my Macbook Pro doesn't recognize purchased audio cd's. Help!!

hi russeel!
when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
okay, we've gone up a
b lot
of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
http://docs.info.apple.com/article.html?artnum=93444
and these resources might be useful:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
keep us posted.
love, b

ITunes won't recognize my audio CD. What do I do?

I recently installed iTunes onto my computer (Dell with Windows XP), and, although I can successfully run iTunes, the program doesn't seem to recognize my CDs. I've tried multiple CDs,and none of them are recognized. THe GraceNote CDDB screen comes up, and then once that is completed, the CD doesn't show up in the sources list of iTunes. I don't think it is a problem with the drive, since the other music player (MusicMatch Jukebox)I have on my computer runs automatically once the CD is read. If someone has any suggestions to what I should do, it would be greatly appreciated.
INFO:
iTunes version: iTunes 6.0.1.3
ANOTHER NOTE:
I was able to successfully run and import songs to my iPod on the previous iTunes software I had about 3 months ago, but I had to reformat the hardrive due to a virus on my computer (not from iTunes).
Dell dimension 4700 Windows XP w/ pentium 4

hi zerodrummer!
hmmm. first, let's try some of the usual suspects:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might help with that:
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
but if no joy with that, post back with the complete results of your itunes "help > run CD diagnostics" (toonz may be able to spot something amiss there.
we could also try a quick experiment. try inserting a CD with your security packages turned off. (some security software, most notably Norton Internet Security 2005, have been known to interfere with Gracenote queries in odd ways that end up manifesting as a CD recognition problem for itunes.)
keep us posted.
love, b

I just updated iTunes to 10.5.0.142 on Windows 7. Now it doesn't recognize audio CDs

After updating iTunes to 10.5.0.142 this morning, iTunes doesn't recognize audio CDs. I ran the diagnostics for my DVD drive, and it said everything was OK, but the CD name doesn't show in the navigation bar, nor does the list of songs appear. I tried with several different pre-recorded commercial CDs.
Ctrl E DOES eject the CD.
Also Help-->iTunes Help ends up with an eror "Not Found--The requested URL /itunes/win/10.5/ was not found on this server."

I find a way to add music.
Make sure iTunes is closed.
Go to the song file on your computer. If the file has the little black musical iTunes symbol as its icon, just double click the file. It should open up in iTunes and stay in you library.
If the little black musical iTunes symbol isn't next to the file, right click the file and go to "Open With" and then click on "iTunes". It should open up in iTunes and stay in your library.
Yeaaa its the long way but that's the only way for now, unfortunately.

I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3. I haven't come across Preview or this problem before. Any suggestions?

I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address. Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format. I haven't seen Preview, or had any problems, before now. Thanks for any suggestions.

Hi,
Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

No audio and website doesn't recognize my log in but other browser do.

I'm and online student and they say it only works in Firefox, however, when I log on to their site it doesn't recognize my user name and password, then I request a new password and it lets me in, but when I go to play the audio exercises I get no audio.

Does the unrecognized login come back again and again, or have you solved that one by resetting your password?
Regarding no audio, some users have reported that Firefox does not work correctly with their speakers but it does work with a headset. Have you noticed anything like that?
More generally:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
* click the padlock or globe icon in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
and OK the restart.
''Both scenarios:'' A small dialog should appear. Click "Start in Safe Mode" (''not'' Refresh).
Any improvement?

ITunes doesn't recognize audio CD's after upgrading to 6.0

I have just upgraded to iTunes version 6.0 and now it doesn't recognize audio CD's when I put them in the CD drive. iTunes no longer lists the name of the CD and the song name on each track.
Can anyone offer help?
Thanks
Marcia

hi russeel!
when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
okay, we've gone up a
b lot
of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
http://docs.info.apple.com/article.html?artnum=93444
and these resources might be useful:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
keep us posted.
love, b

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.
I had no problems on snow leopard.
thanks

Well I found my answer…
http://www.focusrite.com/answerbase/en/article.php?id=1159
At the time of writing, the following products arecurrently not working with OS X 10.7:
Saffire PRO 14
Saffire PRO 24
Saffire PRO 24 DSP
Saffire PRO 40
Liquid Saffire 56
Liquid Mix HD
Forté Suite
Scarlett Plug-In Suite
Focusrite is committed to providing support for ourproducts with the latest operating systems. We are currently working onproviding full support for our products with OS X Lion, and these will beavailable as soon as they are complete.
Please check this page regularly for the most up to dateinformation regarding OS X 10.7 Lion compatibility information.

Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

Is there a way to force PE7 to conform/recognize the audio on a file?

I imported a .m2ts clip but it doesn't see the audio at all. I've already verified the project settings so I know thats not it. Is there a way to force PE7 to conform or recognize a file again?

What is the Audio CODEC used in the muxed MPEG file? G-Spot should give you the full details. Where, exactly, did the files come from?
PrE and PrPro can often have problems with muxed files. Much of that depends on the exact CODEC used with the Audio. One method would be to demux the file, i.e. elemental streams with video-only and audio-only. Another method would be to rip the Audio from the muxed file with a program like Audacity, and then Import that separately.
Good luck,
Hunt

Lightroom 4.4 Trial not opening on Mac OS X 10.6.8 - "doesn't recognize disk"

I'm trying to download a trial version of Lightroom and nothing seems to be working. I have Mac 10.6.8 and apparently LR5 isn't compatible. Adobe support suggested I download LR 4.4, which I did, and tried to open but it is telling me it doesn't recognize the disk and cannot open it.
Not sure what I can do at this point. I was really hoping I could try this out as I'm trying to expedite my current editing process and was hoping LR was the answer! HELP!

v2.8 still works on Mountain Lion, you don't have all the latest features, but a better user interface. At least you will have a working Skype, with audio in preference to video conference calls.
v2.8 is available from the Skype needs 10.5.8 warning at the top of the Skype Mac download page. If you want to run both 2.8 & 5 (theoretically you can by putting one of the Skype applications in a separate folder in the Applications folder), however, v2.8 & v5 handle chat/IM data differently, going from v2.8 to v5 will mangle the datestamps on every chat / IM in v2.8. Ideal & faff solution is to have a separate user account on the Mac to preserve chat data....

Captivate 4 doesn't recognize microphone

I just installed Captivate 4 and imported a couple of Cap3 projects. Everything works fine except the audio - it doesn't recognize that the microphone is working. Captivate 3 and other applications have no problems.
I downloaded and installed the update, but it didn't help.
Any suggestions? Thanks.
Marion

Hi Marion,
There are some known issues with certain mics. You may want to read this blog entry:
http://blogs.adobe.com/captivate/2009/03/audio_play_back_and_usb_mic_is.html
--Elizabeth

Rosetta Stone doesn't recognize my internal mic

I have a MacBook Pro (OS X 10.7.1) and I'm running Rosetta Stone Version 3, but it doesn't recognize my internal microphone at all. When I got to Audio Settings > Available Microphones, nothing shows up at all. How do I fix this?

Rosetta's response:
Vittal Prasad K: Thank you for contacting Rosetta Stone, my name is Vittal Prasad. How may I help you today?You: working with an iMac, the internal microphone will not work during setup
You: it is working fine on all other programs, and was working fine about a month ago with Rosetta
Vittal Prasad K: I understand your concern.
Vittal Prasad K: I have checked with our database and found that the program you own is Chinese level 1. Correct?You: yes
Vittal Prasad K: Thank you for confirming the information.
Vittal Prasad K: I would like to inform you that, it is recommended to use the USB headset to access the course. If you use an internet microphone then you will experience issues in speaking exercises.
You: we have had no issues until recently, was working fine and able to pass with 100% in speaking excercises
Vittal Prasad K: I understand that but as per the policy we are not authorized to assist learner who are using an internal microphone to access the course.
Vittal Prasad K: I apologize for the inconvenience caused.
You: really??? your software stopped working, and that's the response?

Voiceover doesn't recognize M-Audio Projectmix

Similar Messages

Maybe you are looking for