Voiceover leaves audio on only 1 track??

fce, using usb mic, 2 questions really... 1) i have used this mic before and it laid down two tracks of audio before say a3 and a4 but now only 1 track and i have read read read, tried everything even reset destination track ..any sugg??
2) with only 1 track of mono audio say a3 im afraid that when done and put to dvd that my narration will only come out of 1 speaker say left side...however upon playback on my mac i do get sound out of left and right speakers ?? should i worry ???

thanks tom...i know vo is mono and i will ASSUME that when i burn to dvd with only 1 channel say a3 and a4 empty with both meters equal and pan set to 0 that idvd will NOT take this single channel and put it only on left speaker....
thanks jay

Similar Messages

How do I turn off all clip audio so only music track is heard?

How do I turn off all audio that is with the original video track so that only the audio soundtrack music will be heard?

Add the clip then click the gear icon on the clip and choose Audio Adjustments… reduce the volume to zero. - JamesJM

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

Exporting 6 channel discrete mono tracks (5.1 mix) I only get 2 tracks with compressed audio and 4 empty track on my output.

Exporting 6 channel discrete mono tracks (5.1 mix) I only get 2 tracks with compressed audio and 4 empty track on my output. I'm using Premiere Pro CC14, sequence settings and export setting pasted below. Please help need to export feature trailer for iTunes release next week. Yikes!!!

Thanks for the notes. Im almost there but not quite. I create my sequence 5.1 like you said
then map the dots and LFE. But when I go export media is only give me the option of 1 track 5.1 not 6 discrete channels.
I check my settings and they LOOK right
then I go into my modify clip settings and I see the number of audio tracks as 1 so maybe thats why Im getting only 1 channel 5.1.
But when I select different settings in modify clip environment I can get it to LOOK correct to me
everything seems to be assigned correctly. But when I go back to export it only still gives me the same option of exporting with 5.1 as a single track.

Audio suddenly only on left track now, some music no longer reading.

Hi there,
After just completing a normal export in premiere with no issues, I open up my project again to find that the audio is only playing on the left track in the sound monitor(in premiere) and on my speakers. I have no idea what's going on because I didn't change anything before saving. Also 2 of the .mp3 files suddenly won't play despite being on the timeline.
I have no idea what's going on but I can't fix it - even copied the edit to a new sequence, the problem follows.
As you can see in the image, the sound file has tracks on both left and right but isn't playing and there are no filters on the sound:

Ok:
I selected all the audio clips in my sequence and dragged them all down one audio track. Fixed the damn problem!!! I don't know what was happening and it doesn't explain much but everything went back to normal.
I took and attached a picture of what the audio mixer looked like during playback:
I'm not sure how to expand the audio to show more of the "yellow" line. But you can see a yellow line in the picture here.
** well dragging them fixed it but I can't seem to replicate this fix on every sequence. It's better than nothing but I'm still uncertain.
below you can see the original track on "audio track 3" that for some reason isn't working and above it in "audio track 1" is the same file, just me placing it there newly. It's driving me bonkers.
**UPDATE** The audio tracks, along with some being panned -100, other were set to -infinity on the channel volume. I'm not sure how premiere decided to do this or how I would have prompted it. To fix this i simply changed the channel volume back to 0db

Premiere capturing same audio in two separate tracks

My sequence capture settings (using a Xena LS capture card) are for two audio channels.
Right now I'm recording only with one microphone and have only one track of audio.
But when I'm capturing that single track of audio, it's showing up on both of the audio tracks in the timeline (same audio on two separate tracks).
Is there a setting to change that?
I have the basic settings for two audio tracks just for when I use two mics on separate camera inputs.
But when I record only one track, I would expect it to show-up on only one track in the timeline.
Could this be purely a Xena issue, or is it the interface between PP and Xena?
Thanks!

Thanks! I haven't used Premiere for about five years, but I remember that it's the way I used to do it.
Same with the Velocity system I used inbetween.
The Xena CS4 plugins just came out, so I'm going to contact them about this issue.
I'll leave this thread open in case someone has the same problem and wants to post it.

"system overload" in logic pro 8 on my Mac Pro with only three tracks

I am running Logic Pro 8, on a 2.66 Quad Core Mac Pro w/ only 1GB of RAM. I have not had the money for the much needed ram upgrade, yet.
The day before yesterday I opened a project I had opened many times, with only three tracks - two audio and a midi synth with only a few notes. These tracks are fairly well plugin-ed up, but this Mac Pro has always eaten them up, no problems. When I tried to play the project, I got system overloads every 2 seconds, rather precisely actually. My CPU usage reads low in logic and with iStat, but suddenly it peaks to 100% on my third core and I get the system overload.
I had my buffer size at 128, so I switched it to 1024, it worked, and then I switched it back again and everything worked like it used to!
But now I have to go through this slightly illogical little procedure everytime I open a project. I have read threads here about this subject before, back I cant seem to apply them / understand them in relation to my particular situation.
any ideas?

Join the club...wait for them to patch/update it.
I've tried the various work arounds, sometimes they work temporarily, sometimes not at all.
For the overloads the most reliable "work around" is to select each track, open the VI/FX modules associated with that track, then close them, go to the next track and repeat the process. OR, if you know all the modules (VI/FX) you're using, just open each one. This will "initialize" their existance BEFORE the audio engine hits them in playback.
My guess is LP8 tries to reduce it's memory foot print and does NOT initialize all the VI/FX in a saved project that is just opened until it actually needs to use them -- a good idea one would think. However, when you do your playback and it hits the VI/FX for the first time (after you just opened your saved project) it appears the audio engine stalls waiting for the VI/FX to initialize the 1st time around and hence the overloads error. Obviously I can't prove this since I don't have access to the code, but I'm a developer and this would be my logical guess based on the evidence at hand.
I can reproduce the problem consistently:
1. Start LP8
2. Open existing project with 3 tracks (staggered to start a different times) with different VI on each track
3. Have 3 buses with a different FX on each bus
4. Do nothing other than hit Play
Overload when it hits start of 1st track VI, stop, restart, overloads when it hits start point of 2nd track VI, stop restart, overloads when it hits start point of 3rd track.
Why wasn't something this obvious caught in testing? Good question.
Rob.
Message was edited by: Rob A.

Overlap audio regions on 1 track without cutting the previous one off

Im trying to overlap multiple audio regions on one track, so that the next one starts before the previous one ends but when i do this, each consecutive overlap basically replaces the remaining region of the one before it. to be more specific in order to maybe paint a better picture of what i am asking... i am creating machine gun audio for a video clip and i have a loop of a single shot plus the shell falling to the ground. im trying to overlap the loops so that the single shot of each come together in rapid fire succession to create the machine gun firing sound, but i want the sound of the shell falling for each shot to continue to play under the multiple copies of the overlapping loop. the problem is, when i overlap multiple loops, its not finishing the noise of the shell falling to the ground for each shot, it only plays the falling shell at the very end when there is no other overlap. i hope i did an ok job explaining what i am asking, haha trying to type this out was much more difficult that initially anticipated. thanks in advance for any help.

That's normal. Audio tracks are not polyphonic. Use several tracks or EXS24.
Christian

Itunes import only missing tracks

When I imported my CD library into iTunes, I had limited disk space, so I only imported tracks that I like. Now that I have a larger hard drive, I'd like to import the rest of those tracks. Is there any easy way to import only missing tracks, leaving the previously-imported tracks (and their ratings and play counts) alone? If I have to manually check each album to see which tracks are already existing, it'll be a huge undertaking.

Just reimport the entire CD. It'll ask if you want to replace the tracks already imported.
Click Yes.
This won't change anything (playcounts, ratings) or anything else.

HOW TO SHOW PLUGS ONLY WHEN TRACK IS SELECTED??

Hello, I has an m audio axiom pro, and it had a cool feature where when you selected a track in logic the plugs you were using for that track would pop up on the screen, when you went to the next track only that tracks plugs would show....
Is there a way/key command to set this up?
Thanks!!

Hello, I has an m audio axiom pro, and it had a cool feature where when you selected a track in logic the plugs you were using for that track would pop up on the screen, when you went to the next track only that tracks plugs would show....
Is there a way/key command to set this up?
Thanks!!

Copying video w/audio and only pasting audio?

I was asked this earlier today and I had to admit, I had no idea how to do this.
My colleague would like to copy a clip (video and audio) and only paste the audio. I've hunted through the manual and I didn't see this, so I'm asking here.
This is something she has to do over and over, and due to the set up where she's recording (don't ask), they record voiceovers to tape (it's a public access channel with low-budget), but she only needs the audio.
The solution I suggested was to put them all into a sequence and then just option-select all the video tracks and delete them.
Anyone have any better ideas?
Thanks!

Maybe I'm misunderstanding the problem, but;
In order to copy a clip you first have to select it. So if before selecting the clip she turns off linking and just selects the audio portion of the clip then when she pastes it'll only be the audio that is in the clipboard.
Isn't that what you're asking?

IPhone 4 audio books only showing 3 minutes and then skipping if I fast forward

I have a number of older audio books and audio files that I have recorded myself using a dictaphone and added to the iTunes library and then set the info for them to be "audio book".
Since the latest software update, my iPhone 4 (and no it's not jail broken) has a) not updated the iPhone library to include or exclude audio books I add or remove from it via sync (using either playlists or the book option where you can tick the books to sync). Instead I have to search on the phone for them and then I have a number of problems with the actual playback:
1) some of the audio books only show a track length of 3 mins even though on the computer they show as their true length (over an hour).
2) on the above audio books and even on the ones that do show the right length, the second I try and fast forward, use the scrubbing bar or rewind them, it skips to the next track!
This is highly frustrating and I can't find a similar problem on support when searching.
Any suggestions/ideas much appreciated.

Really? Has no one else had a problem with audio books not appearing in the library and then skipping to the next track if you try and fast forward or rewind any of it?

How can I link to only one track on an album in the iTunes store?

I'm trying to link to a song and keep it seperate from the rest of the content on the album. The link generator is giving me a link to the song but it still brings up the rest of the album too. Is there anyway to isolate and link to only one track? Thanks!

Experience (of iPods) tells me that the 160GB Classic and the 120GB Classic are from the same "family" and should therefore behave the same way. (The nano is a different family and the Touch another family yet again.)
So, since my 160GB Classic can play one episode at time, your 120GB Classic should too. To achieve this, turn on *shuffle songs/albums.* No, I'm not joking!
With shuffle on the Podcasts will play one episode at time when you select an episode from the episode list. Be sure to turn on the shuffle from "within a song" or from the ettings menu. If you have shuffle displayed on the main menu and use that to start shuffling songs, it doesn't affect Podcasts. You will know it's set correctly because the display will show 1 of 1 instead of 1 of "X".
Phil

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

Loading only aac tracks to ipod

I have ongoing issues with many mp3 encoded files being "skipped" when I try to play them back on my ipod. I have discovered that if the offending tracks are converted to aac tracks within itunes, that they will play fine on the ipod. To save some effort, I had itunes convert the entire music library to aac encoding. Now in the itunes application library, I have duplicate songs, one mp3 copy and one aac copy. My question is, now if I load the clean (delete all the content presently on it) ipod will all the songs (aac and mp3 copies) be loaded onto the ipod (duplicates of all songs) or will itunes just load the aac/MPEG4 songs in the itunes library folder (user>my music>itunes>itunes music). I need a way to insure only the aac encoded material is loaded onto the ipod.
Thanks

iTunes will not distinguish between AAC and MP3 tracks when syncing to an iPod, since the iPod can play both. If you want to sync only AAC tracks, you'll either have to create playlists with only your AAC content and sync those, or remove the MP3 versions from iTunes (the easiest way to do the latter is to show the Kind column and sort that that; that will collect all your MP3 tracks so you can easily select them all and delete them).
BTW, for future issues with MP3 tracks not playing correctly, the headers on the problem tracks may be corrupted or nonstandard. This can happen with some MP3 conversion or import utilities, and iTunes and the iPod are very picky about headers. Mp3 Validator Mac version may help.
Regards.

Voiceover leaves audio on only 1 track??

Similar Messages

Maybe you are looking for