Voices output from Creative Recon3D PCIe are low

Hi all,
I had been using Creative Audigy 4 on windows XP for 4 years.
Recently, I bought a new PC running windows 7 ultimate and with Creative Recon3D PCIe installed.
After the software installation for Creative Recon3D PCIe was done, I tried to play a music track in Window media player.
I could hear the bass, but I found that the human voices (singer voices) were too low to be heard. I needed to turn up the volume to 53db before I could hear the voices.
The problem that the voice was low never happened on my sound blaster audigy 4, but it just happened on Creative Recon3D PCIe.
I have tried out all possible methods, including doing the setting in windows 7 for the two speakers, but with no success.
Please give me some help.
Thank you.
Kitty

I have fixed the dropout and stuttering problem. It was not Creative fault but instead it was caused by the malicious site blocker package that was loaded by Malwarebytes in February. I loaded DPC Latency Checker and watched it's real time graph and the latency was through the roof, something was eating my computer alive and it was not my SB Recon3D PCie card that was doing it Turning off Malwarebytes fixed the problem. Before I dumped the MWBS I checked in at it support forum and they where getting flamed over the malicious site blocker and locking up XP machines so I turned it off on my Windows 8 machine and instantly fixed the problem now my new Creative Sound card sounds great like all of the other SB card I have had over the years. Anyone having this problem load DPC Latency Checker, it is freeware, and see if you have a latency issue that is causing your problem.

Similar Messages

  • Different interfaces for purchase order output from MM system

    Dear Guru's,
    We are configuring the business scenarios of service procurement classic and Plan driven procurement with supplier enablement in the MM-SUS environment for our SRM7.01/ECC6 ehp 5 combination.
    These two scenarios are using different interfaces for purchase order output.
    The service procurement classic is using the proxy interface PurchaseOrderERPRequest_
    Out_V1 for purchase order output from ERP.
    However, the plan driven procurement uses the interface ORDERS.ORDERS02 for idoc message for purchase order output from ERP.
    Why are there two different interfaces for the same document output in two different business scenario? How the system will determine which interface needs to be used in the runtime for the purchase order output?
    Any thoughts will be highly appreciated.
    Thanks and regards,
    Ranjan

    Hi Ranjan,
    Please add the value 'CL' in the table SWF_CATIDS
    Then it will work.
    With Regards,
    Malay

  • RSS Feed with articles from Creative Knowledge B

    Over 40 MP3 articles from Creative Knowledge Base are available in RSS Feed:
    Creative Knowledge Base | MP3 Players
    Other Feeds

    I got it to work, but I'm not going to share the solution with anyone because nobody even tried to help at all and I'm not sure what caused it in the first place.

  • Trouble specifying TTL for digital outputs from PCI-6221

    Hi!
    I'm trying to generate TTL output signals using a PCI-6221 daq board - within Labview, I'm using DaqMx to create two digital waveforms and then write these. When I plug in an oscilloscope, the shapes/frequencies of the signals are correct, but the lower value is 0V, and the higher value is 1V, rather than the TTL values. Is there a way to specify these voltage levels to TTL within the software? I see from NI help that "do.logicfamily" exists to specify TLL, but when I add a property node and connect it to the channels, I do not see Logic Family as an option under "digital output." Let me know if you have any ideas!
    Thank you,
    Emily

    Set your oscilloscope to use 1MOhm impedence.  Your problem is that the maximum current for those DIO is 24mA.  1V/50 Ohms = 20mA.  So you are current limiting the digital outputs.  If you need more current, then you need to add in some digital buffer chips that can output more current.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • MBP low voice output

    Hello,
    I've got a macbook pro for almost a year with lion.
    Suddenly a few days ago the voice output (via the bluetooth device) became very low.
    From the iPhone the voice is great so it's not the bluetooth device.
    What can I do?
    Thanks a lot.

    It's funny... I'm still trying to figure that out. There is one program that says "Quick Message" when you get one. At the same volume level as previous laptop, it is quieter. But with volume full up I believe things are a loud as they were before.
    I just played a stored mp3 that I am have played before. I think the mid-volume is softer than it was. From there down I don't hear the song at all. But from mid to above I believe I can get the song as loud as before.
    I did notice something but it wasn't conclusive. As more people chime in maybe there will be a consensus.

  • Trying to understand what are the parameter/output From debug SNMP timers

    Hi All
    I am trying to understand what are the parameter/output
    From the debug SNMP timers
    Output SNMP timers :
    *Dec 31 11:56:27: SNMP: HC Timer 632DDE28 fired
    *Dec 31 11:56:27: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
    *Dec 31 11:56:32: SNMP: HC Timer 632DDE28 fired
    *Dec 31 11:56:32: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
    *Dec 31 11:56:37: SNMP: HC Timer 632DDE28 fired
    *Dec 31 11:56:37: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
    *Dec 31 11:56:38: SNMP: HC Timer 70B54A70 fired
    *Dec 31 11:56:38: SNMP: HC Timer 70B54A70 rearmed, delay = 20000
    70B54A70 , 632DDE28 „² what this number means.
    5000 , 20000 „² why I have different delay time ( does it means that I have delay for SNMP request )

    The debug messages you are seeing are related to High-Capacity (HC) timers, which manage updates to 64-bit (HC) snmp counters as defined in RFC2233.
    The "fired" and "rearmed" messages indicate when each of these timers
    updates ("fired") the HC snmp counters, and when they should fire next
    (the "rearmed" messages). Higher speed interfaces require updates more often than lower speed interfaces, so you see two examples of that in your debug messages - 5000 ms updates vs 20000 ms update.
    The numbers that are in the messages (i.e. 632DDE28 ) are internal references to the timer that has fired.
    These messages do not indicate any delay in SNMP message processing, but normal SNMP operation of HC counters.

  • Lower than expected sound output from A100

    Hi.
    I have recently bought a Satellite A100 PSAA9E and have been pretty disappointed with the low sound output from it.
    It's currently set to the highest volume level and is nowhere near the level I would expect.
    Is this normal for this machine? All advice appreciated.
    Thanks.

    Hi
    Well, its not easy to say what a low level is because its your own perception.
    You know that the notebook speakers are not very powerful speakers because of the size and you can not compare it with other speakers.
    But nevertheless; did you check also the settings in the control panel -- Sound and Audio devices?
    There you can set the different sound controls to max. Maybe then you will notice a difference.

  • Low output from idt codec

    new h8-1360T w/win 7, low output from idt codec, adjust level to max and barely have one green bar, adjust through beats and same, no change, cannot record.   Is it a Beats problem?   help

    If you have opened the Beats Control panel (right click on Beats on the TaskBar) and checked the Beats "Master Volume" to make sure it is not "off" or turned down all the way...
    then
    the issue may be a driver problem.
    Two ways to try and deal with the Driver Issue (if that is what this is):
    Method One:
    Use the Recovery Manager to Reinstall your original IDT Audio Driver.  The procedure is below:
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Reboot and check...
    ==================================================​===================================
    Alternatively, if that does not seem to help, you can try the Driver version in your computer's website.  This method is a bit more complicated, but it has the added advantage of "resetting" things in a way that the previous methiod does not attempt.
    Note that the version of the IDT may be critical for your setup for some reason.  This is why it is necessary to try the first method before jumping to this second method.  The version of the IDT Audio in your Recovery Manager is the "original" version and it may be the one that makes your computer happy.  You can always update if things go well and you want to experiment.
    Method Two:
    Download and save this file to your Downloads folder on your computer:
    sp57492 IDT High Definition Audio Driver
    Next:
    Control Panel > icon view > open Programs and Features > right click on IDT Audio > Select Uninstall
    Reboot the computer, and log in
    Open the Downloads folder,
    Right Click on the downloaded sp57492 installation package > "run as Administrator" > and start the installation
    Complete the installation, following any instructions
    Open the Speaker Icon (in Taskbar) > Playback Devices > Speakers and Headphones > Select "Set Default"
    Check the sound levels...
    Now, there are a variety of settings and such that ARE a part of the Beats setup, but the basics have to work before the Beats even enters into the equation.
    ==================================================​==================================
    Finally:
    It could be something that you can "fix" by setting:
    Sound icon > Playback Devices > "Ehancements" > CHECK Loudness and Equalization > OK
    I personally dislike this workaround.  It is not a solution.  It is a bandaid.  Nonetheless,  when all else fails... IF the enhancements setting is avialble (Windows 7), then it does work for folks...
    ==================================================​==================================
    I hope this helps.
    Kind Regards,
    Dragon-Fur

  • No more PCI From Creative?

    Hello All, I just came from my fave Computer shop with some disturbing news..
    I had ordered an Audigy 4 Limeted edition which should be available here in Alberta around the 3rd week of april, During our conversation he explained to me that ther will be no more future development or creation of creative PCI "Slot" Products.. and the Audigy 2 is now going to be the "entrance level" card from Creative..
    Knowing the shady history of Creative drivers , i immediatly cancelled my order and went with an External solution.. It should be here in about 3 weeks and ill be sure to post weather or not it solves my problems posted in previous threads..
    I just wanted to know from the people "in the know" is this true? and if so.. does that not mean creative will cease all driver updates ect and support for all the st gen Audigy and audigy 2 cards?
    Im very curious...
    thankyou in advance]
    Faceman......
    Message Edited by facebash on <SPAN class=date_text>04-0-2005<SPAN class=time_text>:6 PM
    Message Edited by facebash on 04-0-2005 :6 PM

    Facebash,
    Well since I have not heard anything even remotely like that I suspect your computer tech has been the victim of a rumor. All of our current products are PCI and I don't see us stopping working with it anytime soon.
    Jeremy

  • What's the smallest sine wave output from PCI-5401(50&60Hz)

    Want to know the minimal sine wave output from the PCI-5401. Primary use for tests with 50 & 60Hz, with different loads.

    Hello,
    Are you talking with respect to frequency? Using the DDS mode, the frequency resolution is 9.31mHz. You can find more in the appendix B of the manual. I am providing the link below. Please do let me know if you have any questions.
    5401 Manual
    Sincerely,
    Sastry V
    Applications Engineer
    National Instruments

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • What are the characteristics of the sound output from the speaker iPad3?

    What are the characteristics of the sound output from the speaker iPad3?

    man -s4 proc
    or
    http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
    Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
    Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
    process whose procfs directory is being accessed.
    tim

  • I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
    Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
    Get CS6 Apps from Cloud Subscription:
    Download previous versions of Adobe Creative applications -
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • What are the steps to upload zipped LMS output from UPK into iLearning?

    Please would someone be kind enough to detail the steps to import zipped LMS output from UPK into iLearning or point me to where I can find this information?
    Many thanks.

    The zipped output from UPK contains a few folders within the zip file itself before you get to the area within the zip where the imsmanifest.xml file is. You need to repackage the zip so that the imsmanifest.xml and related .xsd files are at the "root" of the zip file, rather than in a directory within the zip.
    So basic steps are as follows:
    1. Extract the zip file locally to your hard drive.
    2. Navigate down the newly created folder structure until you see the imsmanifest.xml file.
    3. Add/replace the .xsd files in this location with the iLearning specific XSD files that you can get on metalink
    4. Select all the files in this directory (including the folders in this directory like "audio", "certificate", "help", "images" etc), then right click and add to a new zip file. This will ensure that the new zip file contains the imsmanifest.xml and related xsd files at the root of the zip file rather than buried in a folder.
    5. Import as SCORM 1.2 in iLearning and off you go.
    Hope that helps.
    Scott
    http://www.seertechsolutions.com

  • Is Adobe Connect part of Adobe Creative Cloud? Are there any best practices ideas from people who use Connect and Creative Cloud?

    Is Adobe Connect part of Adobe Creative Cloud? Are there any best practices ideas from people who use Connect and Creative Cloud?
    I have an Adobe Connect account and I'm are also in the early stages of developing a webinar. I am looking for any tips and advice from anyone who uses both of these services.

    As the £27, was an introductory offer. Upon the completion of one year, the price will change to the normal creative cloud cost which is at £46.88. However if you have the previous versions of the creative suites like CS 3, 4, 5, 5.5 or the CS 6. You can avail the offer at £27.34 per month incl. VAT. However this Requires annual commitment; billed monthly.

Maybe you are looking for