VoiP and the clients
Has anybody set up Vonage voip on their S60 device? If so, how is it done?
Honestly I'm going a little mad evaluating all these different Voip/SIP clients. Love Truphone and Skype via Fring works ok.
Have a Vonage account and would like to see if that can work.
Any help is appreciated.
-Jay
Jay: I know this has nothing to do with your question but since you are in Spain, would you be so kind to tell me if your phone is a E90 and your keyboard has the letter ñ and which alternate languages you can choose on your setup ?
Regards
Robert
Similar Messages
-
We have an RDS environment configured on server 2012 with approx. 20 users connecting for remote app utilization across 4 different locations that are connected via VPN. Server 2012 has great resources from the virtual host so system resource allocation
shouldn't be an issue. I'm thinking these errors are correlating with the performance problems. Any recommendations on how to effectively end these errors or to boost performance?
RDS Log File
Log Name: Microsoft-Windows-RemoteDesktopServices-RdpCoreTS/Operational
Source: Microsoft-Windows-RemoteDesktopServices-RdpCoreTS
Date: 3/3/2015 7:47:51 PM
Event ID: 97
Task Category: RemoteFX module
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: REMOTE1.mzltg.local
Description: The RDP protocol component X.224 detected an error (0) in the protocol stream and the client was disconnected.
System Log Error Log Name: System
Source: Schannel
Date: 3/4/2015 10:42:02 AM
Event ID: 36887
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: REMOTE1.mzltg.local
Description: A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 49.Hi Shane,
Do you have any progress at the moment?
Regarding the TLS error code 49, it indicates a valid certificate was received, but when access control was applied, the sender did not proceed with negotiation.
More information for you:
SSL/TLS Alert Protocol & the Alert Codes
http://blogs.msdn.com/b/kaushal/archive/2012/10/06/ssl-tls-alert-protocol-amp-the-alert-codes.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYIHi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
========================= -
I am using Communicator Pro with Enterprise Calendaring, Calendar client 4.6,
and when I attempt to launch it I immediately get a core dump and it does not
launch.
<P>
The 4.6 motif client is not able to run against the 4.0 Calendar Server.
It is strongly recommended that you use the 4.61 motif Calendar client (bundled with the 4.7
Communicator Pro release) or 4.51/4.52 against Calendar Server 4.0. There are
known problems when going offline while using the 4.5 client on any platform
against the 4.0 Server. Both the 4.51 Windows and the 4.52 motif clients have
repaired this problem.You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Setting up a mail server and the client
Hi! I'm setting up a mail server on a virtual server (VMware Fusion 2.0.5) and I've a lot of problems. how to set up a mail account with the workgroup manager?? I create accounts but it doesn't appears on Server Admin in the mail service. And how to configure the email for an account ?
the short name is "it" and in the mail tab the mail server is "my.resolveme.com"
The mail address for this example is: [email protected]
please help me!!!Hi,
Do you speak french ?
This is my records for the dns :
A mail.sebas.resolveme.com 153.109.XX.XX
MX sebas.resolveme.com mail.sebas.resolveme.com
What is the name for the server : mail or other ?
Second problem : I tried to send a mail by telnet. It's ok, the mail is queud. But if I go with outlook to see my mail box I can't see nothing
We are ok for the mail of the client : it's shortname @ the name in WGM (like sebas.resolveme.com)
Thanks for the answer ! -
DB_ENV- set_rpc_server and the "CLIENT" type
Working in the python bindings, I have found "DB_ENV->set_rpc_server()". It has an optional parameter of type "CLIENT". Where is "CLIENT" defined?.
Hi,
CLIENT is part of the underlying RPC interface. See the manual page for "clnt_create" on most Unix systems for that documentation. Setting this parameter can give applications some more control (particularly over the communication protocol used to connect to the RPC server).
In almost all cases, C applications pass NULL for the CLIENT parameter and allow Berkeley DB to create it internally. We have not exposed this parameter in other language APIs (e.g., Java or Perl).
Regards,
Michael Cahill, Oracle. -
Hi,
I am exporting a quicktime file H.264 at 720p but cant seem to render the video. I have read through heaps of forums and have tried the following:
-Added black video (from premiere) to the video track 1 for entire length of work bar.
- ticked use preview files. and rendered all video, audio and effects before exporting.
- un-ticked include xmp
- tried exporting without audio.
- tried only a few seconds of footage
- tried adding a single opacity keyframe to the first frame of the sequence
- played around with the quality of the clips.
- I've even tried making a new project with just a 10 second clip.
Each time After about 10 minutes of waiting I finally get an error msg as below:
- Source File: /Users/StudioB/Library/Caches/TemporaryItems/Untitled.prproj
- Output File: /Users/StudioB/Desktop/Sequence 03.mov
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 07:13:59
Mon Mar 22 18:29:58 2010 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I haven't moved any files and haven't had a problem with rendering the sequence in premiere. but i have had multiple crashes when altering audio
track properties (adding compressors etc.)
The project file and media was originally copied from CS3 on quad core pc (win xp) and is now running on Mac Pro Dual quad OS X CS4 version 4.0.0
I am really stuck for a solution. Can anyone offer a suggestion?Please try to trash your prefs and clear your media cache as well.
http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html -
Hi,
I will appreciate if someone can point me to some documentation as to how app-fabric client library accesses the app-fabric cluster.
What I have found so far is that the list of hosts provided in the client configuration are used as an entry point into the Cache-Cluster. By connecting to one of hosts, the client will download information about all the hosts constituting the cluster.
Since a named cache is distributed across the entire cluster, and the data can be stored on any node. How does the client decide which node it should connect to, to get the data from. Does the client have enough information to know which host has the data
or the client will connect to one of the nodes, if the node has data, it will serve it otherwise redirect the client to the node that has the data.
I also would like to know what do you say about the idea that we would like to put our cache-cluster behind a virtual ip, so that if needed, we can take down nodes or add more nodes. In fact the virtual ip will that of a load balancer, but we don't plan to
use it for load balancing purposes but the idea is that the client will have the virtual ip address and we can repoint this IP address, if we need to take out a node for maintenance reason.I'm not sure about the reason for putting the cache servers in a VIP, but one of the reasons why the cache servers should be made known to the servers is because of auto load balancing and throughput
Imagine i have 10 cache servers running on 1G ethernet links, theoretically i have 10G usable bandwidth and the clients will be able to manage and load balance if any of the cache server fails or have performance issues
Now if all these were parked behind a VIP
1. The LB now does the load balancing, which may not be optimal
2. The LB may not have 10G upstream and 10G downstream, even if it has, this is quite a waste of resource\ -
Can I package and call a java object in the swf? (on the client)
Hello,
Can I package and call/execute a java object within the
swf/adobe flash player?
I want to embed a java object in my swf, and then whne the
swf executes have it call the java object......
E...... there are few instances where it would be nice to
develope a single java object that can be used on the server and
the client..... let's say for the case of server side validation,
that could also be used by the client application for validation,
instead of having to maintain 2 sets of validation logic in two
different languages (java and AS)..... -
Using the server to share files with the clients
Hello everybody!
I finally managed to install properly iFolder on a server, and the client on a few computers. Unfortunately, I was suprised to see there is no functionality to upload from the server to the ifolders structure.
I need to achieve this because the server I used is also used as a datacenter; I hoping to make the data available to each user directly on their own desktop using the mechanism integrated in the iFolder framework.
Obviously, I would like to avoid copying back with ssh or ftp the files to one local client, and forth to the server using iFolder.
The simplest thing would be to install a client on the server machine as well. Unfortunately, the folder monitoring function only works for graphical client, and my server does not have X installed.
So my last resort would be to connect by ssh to the server machine, then start a non graphical web browser, connect to https://localhost/ifolder/ and share each file one by one... Really time consuming and annoying!
Does someone have any suggestion?
Thanks a lot for your help!
CheersOriginally Posted by malcolmlewis
On Sun, 02 Jan 2011 20:36:01 GMT
aerospeace <[email protected]> wrote:
>
> Hello everybody!
>
> I finally managed to install properly iFolder on a server, and the
> client on a few computers. Unfortunately, I was suprised to see there
> is no functionality to upload from the server to the ifolders
> structure. I need to achieve this because the server I used is also
> used as a datacenter; I hoping to make the data available to each
> user directly on their own desktop using the mechanism integrated in
> the iFolder framework.
> Obviously, I would like to avoid copying back with ssh or ftp the
> files to one local client, and forth to the server using iFolder.
> The simplest thing would be to install a client on the server machine
> as well. Unfortunately, the folder monitoring function only works for
> graphical client, and my server does not have X installed.
> So my last resort would be to connect by ssh to the server machine,
> then start a non graphical web browser, connect to
> https://localhost/ifolder/ and share each file one by one... Really
> time consuming and annoying!
> Does someone have any suggestion?
> Thanks a lot for your help!
>
> Cheers
>
>
Hi
AFAIK if you create a common directory on the server, then use the web
admin interface to create a shared resource, then add the users.
Cheers Malcolm (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.32.24-0.2-default
up 1 day 2:19, 2 users, load average: 0.05, 0.04, 0.00
GPU GeForce 8600 GTS Silent - Driver Version: 260.19.29
First, thanks a lot for your quick help. I am actually deeply impressed by the speed!
Now, I don't know whether it is because I could not explain well my problem, or just because I can not understand your answer, but don't see what you're exactly suggesting me to do....
1) create a common directory: Do you mean I physically create a directory (mkdir /pathtodata/)? Or I create an new folder in ifolder using the web interface?
2) What is as "shared ressource"? I cannot find any reference to this term in the user manual. Do you just mean I share the ifolder I created in the previous step?
3) Add the users: I imagine this is the step where I share the ressource with the user.
Again, I am really sorry if my hesitations are stupid and the answer is obvious, but I read all the documentation and I cannot figure out the answer.
Thanks a lot for your help -
Help needed regarding the client server communication
this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalitaDear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita -
Question about limiting matches and the applicability of LimitFilter?
We have a use-case were the GUI allows the users enter a string that we lookup against an index in the cache using a LikeFilter and by appending "%" to the string entered by the user (the index actually contains the first N characters converted to lowercase and the string entered by the user is converted to lower case and truncated to N positions before the lookup, we have additional logic to handle matching the truncated part of the search string etc but we can ignore this extra complexity for now).
The problem is that if the user enter few (or in the worst case zero) characters the resulting search takes a very long time (since a large number of keys are collected and sent to the client) and the client is not interested (or able) to receive all the results at once.
The LimitFilter seems useful for limiting the number of keys actually sent to the client but from what I read in other forum threads it seems like the nested filter is re-executed and the full result built on the server each time the client request a new page of say 100 keys. This sounds like it still would be time and memory consuming on the server if the underlying filter produce a HUGE number of results each time it is invoked!?
Have I misunderstood the way the Limitfilter operates or is there some other solution you can recommend to the problem?
Best Regards
MagnusThanks for the info!
I do however have two specific cases in mind and would like to know more about what overhead calls to "nextPage" would result in:
1. The LimitFilter wraps a AndFilter. The N first characters of a string atribute is indexed (ordered index) and LikeFilter is used with a "xxx%" substring as key together with a InFilter on a indexed integer attribute using a small (typically max 4 element) set of integers. The value range for the integer attribute is faily small (no more than like 10-15 values exists today) so this filter will not limit the search that much (even not sure an index makes much sense but that is how we do it today - how would the amount of re-calculations at nextPage be affected if I drop this index?).
2. A single EqualsFilter on an indexed integer attribute (part of the composite key) using a KeyExtractor as argument.
Ie if I for each of the cases wrap the filter in a Limitfilter (with a page size of N) how much calculations are performed the first time how much of the calculations would be repeated by Coherence each time i call nextPage?
Best Regards
Magnus -
Problem with the socket and the standard output stream
Hy, I have a little problem with a socket program. It has the server and the client. The problem is that the client at one point in the program, cannot print messages in the console.
My program does the next: the server waits connections, when a client connects to it, the server gets outputstream to the socket and writes two strings on it. Meanwhile, the client gets the inputstream to the socket and reads on it with a loop the two strings written by the server . The strings are printed by the client in the console. The problem starts here; once the read strings are printed ,I mean, after the loop, there are other System.out.println in the client but the console doesnt print anything . It curious that only when I comment on the server code the line that says: "br.readLine()" just before the catch, the client prints all the System.out.println after the loop but why?
Here is the code:
Server code:
public class MyServerSocket {
public MyServerSocket() {
try{
ServerSocket server= new ServerSocket(2000);
System.out.println("servidor iniciado");
Socket client=server.accept();
System.out.println("Client connected");
OutputStream os=client.getOutputStream();
PrintWriter pw= new PrintWriter(os);
String cadena1="cadena1";
String cadena2="cadena2";
pw.println(cadena1);
pw.println(cadena2);
pw.flush();
InputStream is=client.getInputStream();
InputStreamReader isr= new InputStreamReader(is);
BufferedReader br= new BufferedReader(isr);
br.readLine(); //If a comment this line, the client prints after the loop, all the System.out....
catch (IOException e) {
// TODO: handle exception
public static void main(String[] args) {
new MyServerSocket
Client code:
public class MyClientSocket {
public MyClientSocket () {
try{
Socket client= new Socket("localhost",2000);
InputStream is=client.getInputStream();
InputStreamReader isr= new InputStreamReader(is);
BufferedReader br= new BufferedReader(isr);
String read;
while((read=br.readLine())!=null){
System.out.println(read);
//These messages are not printed unless I comment the line I talked about in the server code
System.out.println("leido");
System.out.println("hola");
}catch (IOException e) {
public static void main(String[] args) {
new MyClientSocket
}You are right but with this program the loop ends. As you see, the first class, the Server, writes to the socket one text file. The second class, the client, reads the text file in his socket written by the server and writes it to a file in his machine.
NOTE: The loop in the client ends and the server doesnt make any close() socket or shutdownOutput() .
public class ServidorSocketFicheromio {
public ServidorSocketFicheromio() {
try{
ServerSocket servidor= new ServerSocket(2000);
System.out.println("servidor iniciado");
Socket cliente=servidor.accept();
System.out.println("cliente conectado");
OutputStream os=cliente.getOutputStream();
PrintWriter pw= new PrintWriter(os);
File f = new File("c:\\curso java\\DUDAS.TXT");
FileReader fr= new FileReader(f);
BufferedReader br= new BufferedReader(fr);
String leido;
while((leido=br.readLine())!=null){
pw.println(leido);
pw.flush();
}catch (IOException e) {
* @param args
public static void main(String[] args) {
new ServidorSocketFicheromio();
public class ClienteSocketFicheromio {
public ClienteSocketFicheromio() {
try{
Socket cliente= new Socket("localhost",2000);
File f = new File("G:\\pepe.txt");
FileWriter fw= new FileWriter(f);
PrintWriter pw= new PrintWriter(fw);
InputStream is=cliente.getInputStream();
InputStreamReader isr= new InputStreamReader(is);
BufferedReader br= new BufferedReader(isr);
String leido;
while((leido=br.readLine())!=null){
pw.println(leido);
System.out.println(leido);
System.out.println("leido");
System.out.println("hola");
pw.flush();
}catch (IOException e) {
public static void main(String[] args) {
new ClienteSocketFicheromio();/
} -
Specify the port in the client in a TCP connection
Hi,
I am programming an application using TCP sockets. I have programmed a server whith a SocketServer(port) and is waiting for client's requests (the server is a public host in the Internet). The client connect to the server by means of the method:
Socket s = new Socket(host, port);
That works correctly, but now I want to specify the port in the client. The client's PC in a machine on the Internet and it has a public IP. I tried to use the method:
Socket(String host, int port, InetAddress localAddr, int localPort)
where localAddr is the local IP of the client' PC (because I cannot know the public IP).
However, it doesn't work this method and the client cannot connect to the server. The problem is that I want to specify the port in the client in the socket TCP connection when I try to connect to the host.
How can I resolve this problem?
ThaksI want to specify the port in the clientWhy?
-
Why string type shared variable takes more time to update in the client
I am using shared variables to share the data across a master and the client PCs connected in a network. (Network published & no buffering)
I have created an integer type shared variable(I32) and a string type shared variable (data size is 60 bytes) in the Master and subscribing to the same in the client PCs. In the master PC, I am modifying the data in this order - update the data in the string type variable and then update the data in the integer vaiable.
But in the client PCs, due to the size difference in the variables, I am receiving the data of the integer first and after that about 3-4 sec later only I am receiving the string data. Can any optimization be done to reduce this latency period? Instead of the string data type any better data type will reduce this delay?
Please suggst. Advnced thanks.Latency has a lot to do with your network. 3-4 seconds is a long time though. This could also be due to the larget data size of your string. The integer data size is definitaly not 60 bytes. If you're looking for better performance, I would highly recommend looking into Datasocket communication or TCP/IP communication. (There are shipping example for both.)
When it comes to performance of throughput and efficiency, network-published variables are lower on the totem pole.
I hope this helps,
Kevin S.
Applications Engineer
National Instruments
Maybe you are looking for
-
27 hours to restore my Time Machine?? Really??
I am upgrading my mid 2009 macbook pro. I have used Time Machine all,these years ro backup my laptop. I am at a point of restoring the old hard drive via the Time Machine backup. Can this be right..27 hours for about 230 GB data set???? Wouldn't it b
-
Firefox 3.5.5 will not display gotoAndStop properly when a Mask is involved
I've created a Flash CS3 animation that has a mask moving across a graphic to simulate a horizontal scrolling fade-in effect. I'm using ActionScript 3 to set a Shared Object and the gotoAndStop method to move to the last frame in the animation so it
-
Webstart File - Preferences hangs on XP Pro.
My Web Start console, Help->About returns "Version 1.4.2_02 (build b03)". When I click File->Preferences from the Web Start console, the console hangs and I have to kill it from the M$Windows task manager. I'm running on XP Pro SP1. Is there a way to
-
ATG webcommerce strange error at start of weblogic
Hi, when I try to load every page on my ATG publishing I get a strange error: ####<Jan 6, 2014 6:07:11 PM CET> <Error> <HTTP> <mydomain.com> <ATGpublishing> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel
-
Unable to open a new DB environment on PQ3
I'm trying to create a new environment on PQ3 processor. The same code worked in x86. The result is like this: function db_env->create succeeds, then function db_env->open 1) creates files __db.001 and __db.002 2) remains stuck for less than 1min 3)