VOIP call Failed (Error Code 15) in Prime Event log.

I'm seeing the following events in Prime Infrastructure related to Cisco 7925 phones.
VOIP Call Failed for "(Error Code 15) occurred on client "xx:xx:xx:xx:xx:xx' which was associated to AP <APName> on interface 802.11b/g.
I can't seem to find where this error code 15 is defined.  The closest I was able to find was error code 15 under gatekeeper codes in the following document which may or may not be relavent.
http://www.cisco.com/en/US/docs/ios/voice/monitor/configuration/guide/vt_voip_err_cds_ps6350_TSD_Products_Configuration_Guide_Chapter.html
Any insight into this would be appreciated.
Jake
P.S. No voip call jokes on 802.11b/g please

It had 18Mbps set as the min phy rate.  I also think it has to do with CAC issues at 18Mbps that are pretty well noted and differeing mandatory rates across the 802.11b/g/n and 802.11a/n networks on the controller.  When the phone would roam onto a radio with 18Mbps was the min mandatory rate, it would drop and give this error.

Similar Messages

  • High number of "Network error code 0x2746" in extended events log

    In the extended event log of our database server I see 880 consecutive identical errors, all occurring between
    17:00:49 and 17:15:25. The message is:
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 27 ms, enqueued 0 ms, network writes 0 ms, network
    reads 25 ms, establishing SSL 8 ms, negotiating SSPI 0 ms, validating login 0 ms, including user-defined login processing 0 ms. [CLIENT: 10.127.214.32]
    The timings in each message are a little bit different. It might be interesting to know the averages for these timings, so here is the message again, now with the timings replaced by averages (rounded to 1 digit):
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 32.5 ms, enqueued 0.5 ms, network writes 0.9 ms,
    network reads 29.4 ms, establishing SSL 8.3 ms, negotiating SSPI 0.0 ms, validating login 0.0 ms, including user-defined login processing 0.0 ms. [CLIENT: 10.127.214.32]
    The client is a Citrix server that runs a COTS program. It serves approx. 20 users.
    What can be the cause of this? Can it only be the program that automatically tries to reconnect?

    Hello,
    Please read about possible causes and resolutions on the following resource:
    http://technet.microsoft.com/en-us/library/ms187005(v=SQL.105).aspx
    Please examine any certificate used for communications. Maybe a certificate has expired.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • "Call Failed" error outside of home area code

    I have an iPhone 5 on verizon wireless running IOS 6.1, and everytime I make a call outside of my home area code I get the 'call failed" error.  I have Dial Assist turned on.  I get the same message with Dial Assist turned off.  I am syncing to my corporate Exchange directory if that makes any difference
    Anyone else run into this before?

    hi
    check this links
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    also check Tcode: SLDAPICUST.
    run tcode SLDCHECK? any error?
    Thanks
    Rodrigo
    PS: If useful reward points

  • RFC call failed : Error when opening an RFC connection

    Hi,
    As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
    "RFC call failed : Error when opening an RFC connection"
    Others things are with success message.
    Regards,
    Bala Raja

    hi
    check this links
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    also check Tcode: SLDAPICUST.
    run tcode SLDCHECK? any error?
    Thanks
    Rodrigo
    PS: If useful reward points

  • QuickTime Install Failed Error Code -3 - At Wits End Ready to Return IPOD

    I have been trying to install QuickTime with Windows XP for the past 8 hours. First, I receive the message Install Failed Error Code -3. Then I uninstall software and download and get Error 1722 and the Error 1603 Fatal Error. I'm in a vicious loop of installing/uninstalling. Called Apple technical support and they walked me through the same steps I've been going through all day and I still have the same results. I'm ready to return my daugheter's iPod. I have looked at all the technical help available and have completed every recommended solution with no success. What am I missing? Suicidal in Chocolatetown, USA.

    switch off antivirus and antispyware applications
    Download Quicktime 7.0.3 Standalone Installer
    http://www.apple.com/quicktime/download/standalone.html
    Run the install from your hard drive, not over the internet
    That should fix you up.

  • BT Vision - HDD Access failed: error code VDR370 ?...

    For weeks this box as been playing up, rebooting it self for now reason, this i can take.  Almost 2 weeks ago, woke up for work, turn the TV on and was presented with this: Grey blueish screen: Top left corner "Starting" - Bottom right corner - "BT Vision" - and the bottom middle this "HDD Access Failed: error code VDR370" Now to me this looks like an Hard Drive failure.  Called the Tech Help, the guy said I must be mistaken, that cannot be the code, I said yes.  After spelling out to this idiot that I have gone through the steps on this web site (4 to be precise), it is not working.  i asked can you find out what this means, he said he doesn't know.  I asked to speak to someone who can tell me what this means, nop, all he can do is send out an engineer which will take at least a week for them to arrive, then to make matters worse, if the problem is user error I will be billed £125.95 WT*.
    I explained I am an IT engineer, and since no one there can tell me what this error is, I am confident that this error is Hard drive problem, as it is clicking also.  So my question is: What does this error mean " HDD ACCESS FAILED: ERROR CODE VDR370" SIMPLE. 

    Hi bazk123,
    Thanks for posting. It does sound like this is a drive failure. Is the box making any clicking or whirring sounds? If so it does require an engineer visit to check the box and replace if necessary. I can look into this for you if you wish. Just drop me an email with the details. You'll get the "contact us" form in the about me section of my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Call failed error

    Recently my phone stopped being able to make toll free 800 calls, local and long distance work fine but when I tried to call my bank and other companies 800 numbers I get a call failed error , not sure if it is my phone scewing up or what but I used to be able to call toll free numbers and all of a sudden was not able to anymore. Any suggestions or tips

    Hi and Welcome to the Forums!
    Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

  • Lenovo 3000 N100 Network issue / Wireless Stack initializa​tion failed, error code 117

    Hi,
    Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
    After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
    This is what I've done so far:
    1) Checked Radio switch ---> on
    2) FN +F5 --> connection on
    3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
    4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
    Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
    Diagnose Tool gives the following output:
    "Wireless Stack initialization failed, error code 117"
    Logfile:
    Description : Intel(R) PRO/Wireless 3945ABG Network Connection
    Type : Wireless LAN Adapter
    DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
    PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
    SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
    ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing! 
    Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
    Thanks much in advance for any advice you might have.
    Flo

    Hi
    I have this problem also with my Lenovo 3000 V200.
    Sometimes when I boot up the PC it will connect to the network and everything works just fine.
    At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
    and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
    If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
    access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
    the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
    to get networking up.
    I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
    at seemingly random instances in time. This is obviosly a problem with the Access Connections software
    since the Wireless networking works fine when I let windows manage it...
    Anyone with a fix?
    /Fredrik

  • DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

    Hello,
    when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
    Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
    I just downloaded the latest OS updates last night.
    Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
    Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
    This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
    i'm all ears!
    Thanks, Will
    Software overview
    System Version: Mac OS X Server 10.4.8 (8L127)
    Kernel Version: Darwin 8.8.0
    SONY DVD RW DW-U21A:
    Firmware Revision: AADB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    hardware
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (2.2)
    Number Of CPUs: 2
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.1.8f7
    Power Mac G5   Mac OS X (10.4.8)  

    Thank you for your help!
    At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
    My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
    I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
    without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

  • Sony BRAVIA Call failed error message

    I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

    Shorty wrote:
    Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
    Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
    My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
    To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
    Skype on my phone works better, with better video and sound quality. That's where I'm at.....
    Maybe I'm on a downer tonight...

  • My reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

    my reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

    https://discussions.apple.com/thread/5817040?tstart=0
    ....try everything in that thread, should fix the issue.

  • The Remote Procedure call failed error in Microsoft Direct Access configuration

    Hi,
    I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
    it fails with the remote procedure call failed error.
    Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
    Thanks,
    Arif

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.
    So when you tried starting SQL server service it gave the error right  ?  or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear.  As far as I read your question it has something
    to do with permission. Close SSCM window and this time  right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

    Hi all ,
    For Financial analytics7.9.5 below fact load getting failed "error code 36331".
    'SIL_GLOtherFact_Full' has failed.
    'SIL_GLCOGSFact_Full' has failed.
    'SIL_GLRevenueFact_Full' has failed.
    'SIL_ARTransactionFact_Full' has failed.
    Let us know how to fix this up.
    Should i need to follow the comments posted in this link
    Re: Help !!!  Re: Fianacial Analytics failed with Error Code = 36331
    thanks
    saran

    ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
    Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
    Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
    If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
    My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
    I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

  • Backup failed error code o8x100037

    any ideas?

    Hi,
    >>Backup Failed Error Code 2155348129 Volume Shadow Copy Service error:
    As the following article suggests, this error can be caused by the incorrect Active volume.
    Troubleshooting VSS Writer Failure
    http://social.technet.microsoft.com/wiki/contents/articles/1261.troubleshooting-vss-writer-failure.aspx
    If the issue persists, we can follow the article below to re-register the dlls that are needed by the VSS service to see if it helps.
    Volume Shadow Copy Service and DLLs
    http://blogs.technet.com/b/sdoakes/archive/2006/02/03/418722.aspx
    In addition, the following thread focused on the similar issue and can be referred to as reference.
    Failed Full System Backup Error: 2155348129
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/7eaba8d9-2fc8-41fd-a2ef-18a8d8b9186e/failed-full-system-backup-error-2155348129?forum=windowsbackup
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for