VOIP monitor in partial service

Hi Expert
I have installede a new uccx version 8.5.1 su2 withe the cop file.
What i found that the voip monitor subsystem is in partial service.,the system is in HA
From RTMT loggs i can found that "
3853: May 14 23:28:01.414 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-VOIP_OPERATION_ERROR:VOIP subsystem operation error: Module Name=LRMConnection.readMSG: lrmHost: 20.250.185.68 , lrmPort: 3000,A specific description for a trace= error is: ,Exception=java.io.EOFException
3854: May 14 23:28:01.414 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION:java.io.EOFException
3855: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at java.io.DataInputStream.readInt(DataInputStream.java:375)
3856: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readINT(CRSLRMInputStream.java:211)
3857: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.lrm.io.CRSLRMInputStream.readMHDR(CRSLRMInputStream.java:356)
3858: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LRMConnection.readMSG(LRMConnection.java:156)
3859: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.LrmVoipManager.recovery(LrmVoipManager.java:444)
3860: May 14 23:28:01.415 GMT-1000 %MIVR-SS_VOIPMON_SRV-3-EXCEPTION: at com.spanlink.VOIPMonitor.subsystem.VoipServerHeartbeatThread.run(VoipServerHeartbeatThread.java:50)
Kindly help in resolving the issue
Regards
RC

Hi RC,
Please try upgrading it to UCCX 8.5 SU3 and check if it solves this issue.
CSCts87264 -VoIP monitor device sync has no failover function
http://www.cisco.com/web/software/280840578/90779/RN_UCCX_851_SU3.pdf
Hope it helps.
Anand
Pls rate helpful posts by clicking on the stars below the right answers !!

Similar Messages

UCCX 8 VOIP Monitor Subsystem - Out of Service

All,
Upgraded CCX 701(SR5) to CCX 8.0.2 Premium HA enabled. Both Servers were IN SERVICE. Did a Patch upgrade to UCCX 8.0.2SU1. Noticed that VOIP Monitor Subsystem on both servers showing as OUT OF SERVICE. Downgraded to CCX 8.0.2, still get this Subsystem OUT OF SERVICE.
From RTMT, it shows the following error:
%MIVR-SS_VOIPMON_SRV-3-VOIP_OPERATION_ERROR:VOIP Subsystem Operation Error: Module Name=LRMConnection.readMSG, A specific description for a trace=erroris: ,Exception=java.io.EOFException
Anyone kows how to fix this problem???
Thanks.

Hi all,
I had this same problem and similar/same versions.
Restarting Cisco DESKTOP VoIP Monitor Service (on sub - which had VoIP Monitor Service showing 'OOS') made no impact. I don't think there is any real relationship between DESKTOP VoIP monitor service and VoIP monitor service?
Anyway, restarted the same service on Pub - no change.
Tried restarting various sub services including CCX Engine - no change.
I found I had to restart publisher Cisco Unified CCX Engine, then go to sub and do the same once pub was back to all 'in service'.
I then found that my sub's 'Log Manager' under 'Cisco Unified CCX Serviceability' had gone to PARTIAL SERVICE.
I restarted 'Cisco Unified CCX Serviceability' on sub - which had to be done via CLI.
It appeared to restart no issue - but refreshing the list of services in the GUI several times - it still was in PARTIAL.
Restarted Sub appliance (bounced the server) from CLI, after reboot - all services were back up and IN SERVICE.
Thankfully I didn't have to restart my Pub - all services... IN SERVICE on pub & sub
Resolved.
PS. No calls were dropped for us.

Desktop Administrator - VoIP Monitor Error in UCCX 4.5(2) Server

When i run the desktop administrator and then select the VoIP Monitor under the Enterprise Data Configuration, i got this pop up message "Could not get devices from Sync Service".
Then, i click "OK" and the "Default VoIP Monitor Server" filed got dimmed.
So, i would like to know if there were any way could fixed this problem.
Thanks!
B.rgds,
Tong

Thanks for your update.
I have try your suggestion but the problem remain same.
Here are the log file content your request:
==============================================================================================================
09:34:17 05/12/2010 INFO    LC4505 SNTServiceCommon::Handler: The Windows NT service received a stop message from the Windows NT service manager.
09:34:23 05/12/2010 INFO    LC4505 SNTServiceCommon::Handler: The Windows NT service has stopped.
09:34:27 05/12/2010 INFO    LC4505 SNTServiceCommon::Initialize: The Windows NT service has started.
09:34:27 05/12/2010 INFO    VER0000 LogModuleVerInfo: : Product Version <6.2.0.19> Pri Build <6.2(1)> Special Build < > Platform <2000 Service Pack 4> Debug range <8000-8006>.
09:34:27 05/12/2010 INFO    LC0059 SplkLDAPConnectionMgr::RegWatcherThread: Waiting for registry changes.
09:34:27 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 2 is empty.
09:34:27 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 3 is empty.
09:34:27 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 4 is empty.
09:34:27 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 5 is empty.
09:34:27 05/12/2010 INFO    LC0059 LDAPConnectionMgr::EstablishConnection: Connected to LDAP server on <10.10.10.2>.
09:34:27 05/12/2010 INFO    FCSS0020 ldapInitialize: Could not connect to CM LDAP
09:34:27 05/12/2010 INFO    SS1000 DirAccessSynSvr_i::LRMThread LRM promote server to be active.
09:34:27 05/12/2010 INFO    LRM_1001 SLRMMgr::SLRMMgr(): SLRMMgr object created.
09:34:27 05/12/2010 INFO    LRM_1001 LRMThreadStartGlue(): LRM thread starting.
09:34:27 05/12/2010 INFO    LRM_1001 SLRMMgr::Initialize(): SLRMMgr object initialized.
09:34:27 05/12/2010 INFO    LRM_1001 SLRMMgr::SetLRMAvailableFlag(): LRM interface has become available.
09:34:27 05/12/2010 INFO    LRM_1001 ReacquireThreadStartGlue(): Reacquire thread starting.
09:34:27 05/12/2010 INFO    VER0000 LogModuleVerInfo: : Product Version <6.2.0.19> Pri Build <6.2(1)> Special Build < > Platform <2000 Service Pack 4> Debug range <8000-8006>.
09:34:27 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler heartbeat STOP handle is not null!
09:34:27 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler Successfully created the heartbeat thread.!
09:34:27 05/12/2010 INFO    ACMI0000 AcmiConnectionMgr::EstablishConnection: Successfully connected to server on <10.10.10.2> port <42027>.
09:34:52 05/12/2010 INFO    LC4505 SNTServiceCommon::Handler: The Windows NT service received a stop message from the Windows NT service manager.
09:34:57 05/12/2010 INFO    LC4505 SNTServiceCommon::Handler: The Windows NT service has stopped.
09:34:59 05/12/2010 INFO    LC4505 SNTServiceCommon::Initialize: The Windows NT service has started.
09:34:59 05/12/2010 INFO    VER0000 LogModuleVerInfo: : Product Version <6.2.0.19> Pri Build <6.2(1)> Special Build < > Platform <2000 Service Pack 4> Debug range <8000-8006>.
09:34:59 05/12/2010 INFO    LC0059 SplkLDAPConnectionMgr::RegWatcherThread: Waiting for registry changes.
09:34:59 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 2 is empty.
09:34:59 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 3 is empty.
09:34:59 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 4 is empty.
09:34:59 05/12/2010 INFO    LC0002 GetLDAPRegistrySettings: The LDAP host name 5 is empty.
09:34:59 05/12/2010 INFO    LC0059 LDAPConnectionMgr::EstablishConnection: Connected to LDAP server on <10.10.10.2>.
09:34:59 05/12/2010 INFO    FCSS0020 ldapInitialize: Could not connect to CM LDAP
09:34:59 05/12/2010 INFO    SS1000 DirAccessSynSvr_i::LRMThread LRM promote server to be active.
09:34:59 05/12/2010 INFO    LRM_1001 SLRMMgr::SLRMMgr(): SLRMMgr object created.
09:34:59 05/12/2010 INFO    LRM_1001 SLRMMgr::Initialize(): SLRMMgr object initialized.
09:34:59 05/12/2010 INFO    LRM_1001 ReacquireThreadStartGlue(): Reacquire thread starting.
09:34:59 05/12/2010 INFO    LRM_1001 LRMThreadStartGlue(): LRM thread starting.
09:34:59 05/12/2010 INFO    LRM_1001 SLRMMgr::SetLRMAvailableFlag(): LRM interface has become available.
09:34:59 05/12/2010 INFO    VER0000 LogModuleVerInfo: : Product Version <6.2.0.19> Pri Build <6.2(1)> Special Build < > Platform <2000 Service Pack 4> Debug range <8000-8006>.
09:34:59 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler heartbeat STOP handle is not null!
09:34:59 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler Successfully created the heartbeat thread.!
09:34:59 05/12/2010 INFO    ACMI0000 AcmiConnectionMgr::EstablishConnection: Successfully connected to server on <10.10.10.2> port <42027>.
09:44:22 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler heartbeat STOP handle is not null!
09:44:22 05/12/2010 INFO    FCCTI_1000 CAcmiBase::InitializeHeartBeatHandler Successfully created the heartbeat thread.!
09:44:22 05/12/2010 INFO    ACMI0000 AcmiConnectionMgr::EstablishConnection: Successfully connected to server on <10.10.10.2> port <42027>.
09:44:47 05/12/2010 MINOR   DA0004 GetMACList Could not get csq list, err <0>, desc<>
09:44:47 05/12/2010 MAJOR   FCSS4533 DirAccessSynSvr_i::GetMACList Could not get MAC list
==============================================================================================================
Thanks and look for your further suggestion on this issue.
B.rgds,
Tong

UCCX 10.5 HA, Silent Monitoring, no devices under CDA VoIP Monitoring Device

Hi
I'm configuring Silent Monitoring, but in UCCX CDA under Settings: Services Configuration > Multiline, Monitoring & Recording > VoIP Monitoring Device, there are no devices.
Note: I have CAD agents setup with IP Phone working properly. UCCX is "IN SERVICE", Cisco Desktop VoIP Monitor Service "IN SERVICE"
UCCX 10.5.1.10000-24
Let me know if someone had the same issue.
Regards
Carlito

Hi Carlito,
you need to agregate IP Phone that you want to monitor to RmCm User (Application user), in "Device Information/Controlled devices", and save.
Let me know if this information could help you.
Regards,
Caosfox

VoIP Monitor in UCCX Admin

Hi,
We have made some changes in our environment such as CUCM upgrade etc and i have just come to configure two new agents in VoIP monitor and i get error reading from directory services.
We have updated the JTAPI client, rebooted the server etc and are now stumped.
Anyone got any ideas, we checked the logs and event viewers too.
/Jon

Jon,
The biggest thing I see is that your UCCX version (5.0(2)SR2 is not compatible with CUCM. We only support CUCM 6.0(1)a. You will need to downgrade your CUCM or upgrade your UCCX to be compatible. UCCX 8.0(2)SU3 and UCCX 8.5(1)SU1 are both compatible. The incompatilble nature of the CUCM to UCCX version is causing JTAPI not to be able to sync. Resolving that willl resolve your issues. Please rate helpful posts!!
Regards,
Robert W. Rogier
CSE -- TAC, UCC

Query with BAPI_PO_CREATE1 for Partial Service PO.

Dear Experts,
I am unable to create a Partial Service PO with BAPI_PO_CREATE1. No matter the Qty specified, in the field POSERVICES-QUANTITY; the Service PO gets created with the Qty specified in the RFQ.
For your ref, the sample ABAP code is as below:
"The PR has 2 line items, a coded Service and another uncoded service.
"The internal table service_data is filled by us for testing.
LOOP AT service_data.
MOVE service_data-introw TO poservices-line_no.
MOVE service_data-extrow TO poservices-ext_line.
MOVE service_data-srvpos TO poservices-service.
MOVE service_data-order_qty TO poservices-quantity.
APPEND poservices.
ENDLOOP.
The BAPI executes successfully and a Transaction Commit is also used for PO creation.
Kindly, let us know for any specific fields that needs to be passed to POITEM, POSERVICES or any other BAPI parameters that I have missed out.
Regards,
Yogesh.

Dear Yogesh,
The moment you give the reference of a quotation for Service PO Creation, the Service PO created will always be of the quantity of the quotation. That's because in Service PO Quotation maintenance, the gross price of the service is calculated as rate*quantity. Now, the addition of this Service Gross Price of all the sub-line items of the Service becomes the Basic Price for the corresponding line item.
Hence, any change in quantity in the quotation and the PO created through BAPI with quotation as reference will be in contradiction.
The only option is to create a PO and then amend it.
Regards,
Pranav.

SCOM monitoring on windows services in starting or stopping state

Hi,
Any chance if somebody can help me to set alarm on stopping and starting state windows services (automatic services) in SCOM for client servers.
Balys

1) Using Windows Service Template to create a windows service monitor with enabled "monitor only automatic service" option
2) Export the management pack containing the monitor which created in step 1)
3) Modidy data source from
TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
    <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
    <ServiceName>XXXX</ServiceName>
into
TypeID="Windows!Microsoft.Windows.WmiProviderWithClassSnapshotDataMapper">
    <NameSpace>root\cimv2</NameSpace>
    <Query>select * from win32_service </Query>
AND
<Setting>
          <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
          <Value>$Data/Property[@Name='BinaryPathName']$</Value>
        </Setting>
into
<Setting>
          <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
          <Value>$Data/Property[@Name='PathName']$</Value>
        </Setting>
4) Import the management pack
http://blogs.technet.com/b/brianwren/archive/2008/03/07/using-wildcards-with-the-windows-service-template.aspx
Roger

UCCX IPIVR 7 Editor in partial service

Hi,
Anybody got any pointers on:
1) Why the UCCX engine stays in partial service when the UCCX editor is the only item showing as not runing. Surely the editor is only run when required so shouldn't impact the engine status?
2) When the editor is run up, the engine stills stays in Partial Service as the Editot Bootstrap Manager goes into partial service. I've looked at the MEDT log file with debugging enabled and all I can see is that the engine is waiting for the bootstrap manager to move out of partial sercice.
237: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-4-ON:Enabling WARNING messages
238: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-5-ON:Enabling NOTICE messages
239: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-6-ON:Enabling INFORMATIONAL messages
240: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-ON:Enabling DEBUGGING messages
241: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-OFF:Disabling XDEBUGGING messages
242: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-OFF:Disabling XDEBUGGING2 messages
243: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-OFF:Disabling XDEBUGGING3 messages
244: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-OFF:Disabling XDEBUGGING4 messages
245: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-OFF:Disabling XDEBUGGING5 messages
246: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:Bootstrap Manager: UNKNOWN -> INITIALIZING
247: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-5-ModuleStart:Module has successfully started: Module Name=Bootstrap Manager-4652
248: Jul 22 16:59:05.186 BST %MEDT-GENERIC-5-ModuleStart:Module has successfully started: Module Name=Bootstrap Manager-4652
249: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-6-MGR_INITIALIZING:Bootstrap Manager initializing:
250: Jul 22 16:59:05.186 BST %MEDT-MGR_MGR-7-UNK:Still constructing. Set state to initializing...
251: Jul 22 16:59:05.186 BST %MEDT-MGR_MGR-7-UNK:State is the same => INITIALIZING, no change
252: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:ClusterProfileInfo::Successfully copied profile.ini to profile.ini.bak
253: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:BootstrapManager.initConfig(), bootstrap service hosts=[Ljava.lang.String;@1ca209e
254: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:BootstrapManager.init(): hostBS=false,BS Hosts size=1
255: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:BoostrapManager.init(): BS Host IP=172.16.43.170
256: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-7-UNK:Bootstrap Manager: INITIALIZING -> PARTIAL_SERVICE
257: Jul 22 16:59:05.186 BST %MEDT-BOOTSTRAP_MGR-1-MGR_PARTIAL_SERVICE:Bootstrap Manager in partial service:
258: Jul 22 16:59:05.186 BST %MEDT-MGR_MGR-7-UNK:Still constructing. Set state to initializing...
259: Jul 22 16:59:05.186 BST %MEDT-MGR_MGR-7-UNK:State is the same => INITIALIZING, no change
260: Jul 22 16:59:05.186 BST %MEDT-MGR_MGR-7-UNK:Loading configured Config Manager from properties file => com.cisco.config.impl.RemoteConfigManagerImpl
261: Jul 22 16:59:05.201 BST %MEDT-LOG_MGR-6-CATALOG_LOADED:Log catalog loaded: Catalog=MEDT_CFG_MGR
Thanks
Jed

Hopefully I have my answer to this question.
The editor itself has no impact in the status of the engine, which is what I had expected/hoped ... so it a red herring in my case an not relevant. The reason I have partial service in this scenario is because of bug ID CSCtb77537. I have yet to confirm 100% this is the case as I need to upgrtade the CUCM the 7.1.3 SU2 to confirm it fixes the issue.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb77537
Jed

Monitor an Apache service with Solution Monitoring

Dear all,
We are using Solution Monitoring and the Service Level Reporting and now I'd like to monitor an Apache Service to see its uptime.
I tried to create a GRMG scenario for this, however I noticed that a GRMG scenario always requires a port number in the URL.
Does anybody of you know if it is possible:
     1) to monitor an Apache Service with Solution Monitoring (TA DSWP)
     2) to make it part of the Service Level reporting
     3) any other technology to make the uptime of an Apache Service part of the Service Level Reporting
Thanks a lot in advance for your help!
It is highly appreciated...
Best regards,
Roel

Hello Joe,
If u do not want to import any Structure or BOR- Object, u can follow below steps :
1. Create ur data model by adding the properties manually in SAP GW service builder with correct Edm    types.Doing this would be pain in my opinion ( sometimes we are forced to do this but no other option    doing this way )
   Create associations & navigation needed.
2. U can generate run-time objects.
3. Go to appropriate classes and implement methods with ur Business Logic.
4. Register ur service & consume.
U can also import RFC to create data model and create mapping as per required by implementing correct method as well.
once u do this generate objects and register service and consume it.
Check this out for ur info :
Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
Regards,
Ashwin

Agent and Supervisor Desktop is in Partial service

Hi,
My CAD and CSD shows the status in the bottom as Partial service,when i analyse the service status by clicking on that " Agent Statistics Viewing is Inactive ". What i need to do to enable it.My environment is CME 7.0 , UCCX 7.0 with IP Communicator.
Thanks,
Hari

Hey Jasper,
Please do the following and attach the log for my review.
On the agent desktop, go to c:\program files\cisco\desktop\config
Open agent.cfg in notepad
Configure Threshold=OFF to Threshold=DEBUG
Close any version of agent desktop that's open on the computer, and relogin in. Once you are logged in and see partical service... close the agent desktop program.
Please attach the log file for that time period to this post. The log file is lcoated in
c:\Program Files\Cisco\Desktop\log
Please confirm you are able to login and pull historical reports for the last 24 hours as well.
Is this an HA setup for single server?

UCCX 8.0(2) SPAN/RSPAN based VOIP Monitoring

Hi Alll,
UCCX 8.0(2) High Availability (both servers are co-located in data center, where agents and supervisors are in building across the street over fibre)
SRND for UCCX 8 describes that it supports SPAN and/or RSPAN based voip monitoring, which is a requirement for my client as they have CAD Agents running on Citrix thin client and Supervisors on Thick client PCs.
However I am struggling to find a way to achieve this solution for my client with UCCX 8.x, UCCX 7 we would not have had this problem as you can configure 2nd NIC adaptor on UCCX server to be configured as VOIP Monitoring server port/IP under PostInstall and sniff all traffic for all Agent phone devices as configured under CDA.
Desktop Monitoring is not supported for thin client environment. Customer may eventually purchase QM/WFM, but for now we urgently require the essentials of agent monitoring on UCCX.
Please has anybody successfully had this configuration described above achieved? or have any ideas?
Thank you,
Yavuz

Have you been able to get a response to this post? I am running into the exact same issue with an upgrade to UCCx 8.0. SPAN on the 2nd NIC isn't allowed, and now the customer has lost functionality.
Thanks,
Ben

Steps for building SCOM infrastructure in Windows Azure for monitoring on-premise services ?

Is there a good technical document which clearly detail the steps required to build a SCOM management group in Windows Azure ? I will be using it to monitoring on premise services. I want the entire management group in Azure with SCOM gateways
at the remote sites.
Thanks in advance.

More info:
Installing System Center Operation Manager 2012 R2 in Windows Azure Virtual Machine
http://www.hanusoftware.com/azurezone/part-1-installation-of-system-center-operation-manager-2012-r2-in-windows-azure-virtual-machine/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Oracle Service Bus: Monitoring/Tracking Consumer Services?

Hi,
since we have a Oracle Service Bus and a Oracle Service Registry, is there any standard solution for tracking which consumer services/applications are accessing which provider services? What we need is monitoring the applications (consumer) which are accessing an specific service (provider) registered in the OSB. Is it possible to have this information as monitoring/statistical data in the Oracle Service Bus console? if not, any suggestion to implement such behaviour ?
Thank you in advance,
Antonio.

I would like to have (don't know where) a list with all my consumer services (outside OSB) and so map them with the accessed proxy services (providers on OSB). The aim for this functionality is being able to monitor which consumer services from outside the OSB (then I need a place where these services can be identified and listed) are accessing specific proxy services published as providers on the OSB. Is like "well, I have my proxies published on the OSB, but I need to know WHO (consumers outside the OSB) is accessing to them?". I don't know if such functionality is provided by the Oracle Service Registry or the Service Bus, or it's just a custom implementation without any Oracle product.
Thank you for your help Manoj!
Antonio.

Application Manager in partial service, date format exception

Hi; I was pulling MIVR logs as I see the Application Manager is in partial service. I see an exception of formating the date, but I'm not sure where to go to correct it or if that is even the right thing to focus on. Kind of new to looking at these logs and they seem pretty daunting. I took them righter after an Engine Restart, which usually fixes this partial service issue yet it still is quite large.
Any ideas?

Hi,
The application manager in partial Service can be due to one of the following:
1. An application is referencing a script that was deleted from the script management causing the application to be invalid.
2. The script in itself is invalid.
When we have a system with multiple applications, it becomes really hard to find out the culprit application without the logs.
For this, the easiest way would be to login to Cisco Unified CCX Administration -- Tools -- Real Time Reporting.
Click on First tab and go to Applications.
It will show all the applications and then flag it as Valid -- True on the last column. If this is False, then we can proceed with checking that application.
Note: RTR is a tool highly dependent on JAVA. Check the JAVA version on CCX compatibility matrix and use the same. Else use IE with compatibility mode turned on for viewing this tool,
Regards,
Arundeep

Monitor Windows server services in cloud

I am still new to azure. I have already built 2 ADFS servers in our azure cloud, connected azure to the companies network. All is good. I need to know how to setup monitoring of windows services that are running on those 2 windows 2012 servers. We recently
had the ADFS service stop, and need to be alerted when this service stops again. I didn't see any way to do this in the azure portal

Try the change tracking intelligence pack in Operational Insights
http://blogs.technet.com/b/momteam/archive/2014/09/24/wish-you-knew-which-configuration-change-caused-the-issue-or-what-changed-on-a-server.aspx
I am assuming those 'servers' are Azure VM's (IaaS) ?
While we don't do real-time alerting yet (it's in our backlog - this item
http://feedback.azure.com/forums/267889-azure-operational-insights/suggestions/6519198-long-running-saved-searches-or-scheduled-that-ca ), you can compose your own tailored query in a dashboard and consume it also from mobile experience
http://blogs.technet.com/b/momteam/archive/2014/11/24/access-your-operational-insights-on-the-go.aspx or on the site.
We are in preview, let us know what you think and file ideas on the feedback forum
http://feedback.azure.com/forums/267889-azure-operational-insights
Hope that helps,

VOIP monitor in partial service

Similar Messages

Maybe you are looking for