VoIP Pilot and the info or Point one need to know ?--URGENT
Hi There,
As the subject say, is the Cisco way of VoIP solution is the best of industry. currently we are running a VoIP pilot with Cisco provided solution but just was cusrious that
1)WHAT ALL ONE NEED TO LOOK OUT AND KEEP IN MIND WHILE DESIGNING A VoIP SOLUTION FOR EXISTING TELEPHONY SETUP?
2) IS ONE GO FOR H.323 OR SIP BASED SOLUTION OR SCCP.. WHAT FACTORS TO KEEP IN MIND TOWARDS SELECTION one of this protocol..
Thanks in advance and eagerly await your answer..
Hi,
to keep one Point in mind will not help...
There are many factors and no "One fits all" solution. So in general: know your requirements, know your constraints, keep an eye on budget and do not forget to get early enough the proper skill level for your staff to operate the solution.
Best starting point for technology related information would be to read through the "Cisco IP Telephony Solution Reference Network Design" guides.
Examples:
Cisco IP Telephony Solution Reference Network Design (SRND) for Cisco CallManager 4.0 and 4.1
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00805fdb7b.html
MeetingPlace 5.3 Solution Reference Network Design (SRND)
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns268/c649/ccmigration_09186a00805749ac.pdf
More can be found at
http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_packages_list.html
Hope this helps! Please rate all posts.
Regards, Martin
Similar Messages
-
Hi There,
My Ipad fall down and the screen glass got broken ,
i will be in NY for a week only and i was wondering where is the closest certified Apple repair shop in SOHO is where i can take it for repair whithin a day ???
thanksApple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
I forgot my security question answers and the info apple gave to me didn't help, how do I reset them, I also don't want to call them?
From http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers (the steps half-way down that page should give you a reset link)
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset - which is likely to be by phone as they need to confirm your id and that it's your account.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?
An easy example to prove this bug of Indesing CS6: I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
and
SnapshotUtilsEx-> ExportImageToTIFF (iStream)
The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
This error does not occur with Indesign CS5, nor Indesing CC. -
i was transferring my information from my old iphone to the new one, and i forgot that i had some pictures in the new one. i did the restoring information and the pictures in new one are gone. how can i get them back???? please
Only way to get it back is to restore your phone from a backup, if those pics were included in that backup.
But most likely those pics are gone.
What you should've done was import http://support.apple.com/kb/HT4083 the pics to your computer and after you restored from your old backup, you could sync those new pics to your phone via itunes. -
How to synchronise a calendar on one computer and the music on another one
As I don't want to import my music on the business computer, I'm wondering if it is possible to synchronise a calendar on one computer (business) and the music on another one (private) ? Does anyone have an answer ? I tried with itunes homesharing but everytime i try to synchronise only the calendar, it deletes all my music on my iphone.
Turn home sharing off & uncheck content like music, videos & apps on the computer you only want to sync your calendar with. You can sync your contacts & calendars with multiple computers, content like music with only one.
-
I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?
Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista -
I tried to restore original settings on an ipod touch I just purchased used. It worked fine before and after I selected the restore, I now have the little itunes logo and the usb cord pointing to it and it will do nothing else. any suggestions?
Try placing the iPod in recovery mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I updated my iPhone 4S last night and it is locked up on a screen with the iTunes emblem and the iPhone cord pointing upwards toward it. When I hook it to the computer, it's telling me that the phone is in recovery and I need to restore it. That will erase everything in my phone. What do I do? I can't use my phone for anything.
Use iTunes on the computer to restore your iPhone. Since the iPhone
is already in recovery, any data that was on the iPhone is gone. -
I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking
I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others! -
I am having a Mac Book Pro 2009. And Its currently running the OSX mountain Lion> I need to know will i be able to ugrade it to OS mavericks.???
No one knows for sure as yet. This is the information Apple has provided to date:
http://www.apple.com/osx/preview/
Anything else is a guess. -
I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx
This might help: http://support.apple.com/kb/HT1495.
-
I restart my computer and the AppStore still says I need to restart to install. I've tried many times with failure. I have restarted manually, through the appstore, and on the Apple Menu.
If your computer is looking for a server, it sounds like you might have a problem with your Internet connection.
Chrome is probably trying to warn because .exe files can contain viruses. Chances are, if you're connected to mozilla.com and have https: (a secure connection), you don't have to worry about getting software with viruses or other malware.
Is your account on your computer an administrator account? Are you able to install other programs without limitation? If not, you might not have administrative privileges, which will make it hard to install things. You can download things, that doesn't require admin privileges, but altering the computer's operation by changing programs requires such privileges. If you do have admin privileges, I don't know what could be causing your problem.
Don't know if I've helped you or not, hopefully someone else knows specifically to what you refer and can answer, if my suggestions didn't do anything to help -
My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?
This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!... -
I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????
Go to settings/notification centre and make sure today vie and calendar day view are both on
Maybe you are looking for
-
ICal Search doesn't find events in the "distant" future !!!
I posted this in LEOPARD and at the end, no resolution and "Fred II" recommended I post this is this Snow Leopard discussion - he sent me this link -- appreciate any comments! Here's a bit of a disturbing one: I use iCal (Leopard, so iCal 3.0.8 1287)
-
Please I need some help with a table
Hi All I need some help with a table. My table needs to hold prices that the user can update. Also has a total of the column. my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the tot
-
Displaying Cloumn Heading & it's value dynamically
Hi, I am using report 9i. Can it possible? if Yes how. Depending on parameter from Report Parameter form report column heading should change. Like if input parameter is Case Open report will show Dispute Amount & refund Amount & hide Potential refund
-
Data inconsistency in release procedure
Dear All, I have one query regrading data inconsistency it is as follows. I deleted one release strategy in development system and transported the same to Quality system.After transporting to Quality system I found some inconsistency in data in Quali
-
Error when starting Captivate 6 on Mac
This keeps coming up when I try to start the program. I have uninstalled and reinstalled captivate 6 twice. Any suggestions?