Voip set up

hi all...
i am new to voip configuration... and i have to configure the voip for our branch office... we have 2610 with the 2FXS and 2FXO prot... now i have one pulblic IP address which is used by my local lan user...and we have configured NAT/PAT on our VPN concerntrator... now we are looking to establish the VOIP phone (analogphone with the help of FXO and FXS) we have ASTRIK server at our main office and i want to register my local office analog phone with server at our main office... now what kind of configuration we need on our 2610 in order to configure voip...
connectivity:
ADSL connection form ISP---VPN 3005---D-Link nonmanagable swithch---LAN
at present we have above connectivity and now i want to add my 2610 router with analogphone connected to it... how can i connect and how can i configure it...?
regards
Devang

Dial-peer matching information:
http://www.cisco.com/warp/public/788/voip/in_dial_peer_match.html
Analog DID for Cisco 2600 and Cisco 3600 Series Routers:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/dt_did.htm

Similar Messages

Lumia 920 voip setting

can i use a voip account from braintel on my nokia 920

can i use a voip account from braintel on my nokia 920
i have a pte #************ ( sip:083.138.185.146 )
pls send me sip sitting ( *******@yahoo.com )
thanks 2 U
MODERATOR'S NOTE: This post has been edited. We would like to inform you that we have removed your personal details from your post as it is unwise to publish it publicly on this forum.

VOIP setting on the n8 (SIP)

So i was trying to get VOIPCHEAP to work on my phone, but after going through all the settings, the VOIP tab did not come up on my phonebook...as it should automatically be. Instead, it comes up when i click on one of my contacts. When i click on this though, the phonebook closes. Has any one heard of this problem before? Any solutions?

To follow up on my previous post - I've found those settings for the native VoIP client in the N8 to be unreliable. Sometimes the call will work, sometimes (more often than not) it won't. I'm wondering if being behind a router with NAT is causing the problem as the voip service is registered but it seems to be establishing the calls that's the problem.
As a workaround I decided to try the software supplied by voipcheap:
http://www.voipcheap.com/en/mobilevoip.php?phonetype=symbian
It seems to be lightweight and all calls worked 100%. Call quality was ok too.
Two main issues:
i) while it is running (and after exiting) my phone's contact list is completely empty!? Quite a shock the first time I saw that! However, if you go into the call log it seems to make the contact list work again. Phew.
ii) I think it assumes the phone has call/end buttons as on the N8 the only way I can find to hang up a call is to exit the program
If anyone has native settings for voipcheap/buster etc. that work 100% behind a router/NAT then please post...

N8; How to set up SIP and make (WiFI & 3G)VOIP cal...

N8 only comes with SIP software and you need to download the the VoIP setting software at this link (use VoIP 3.1):
http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...
You can use the N8 web browser and load directly from the site to the phone.
then go to:
Menu>settings>connectivity>Admin.Settings>SIP settings
option>New SIP Profile>use default profile.
This window needs to be configured with your VoIP provider setting which may be found on their site or just do a search. I used the settings from my previous phone. I have Gizmo VoIP and will be using the setting for this service as an example to set up Wifi and 3G SIP setting
Profile Name> Gizmo, (assign the name of your provider e.g.. Gizmo, Google talk, etc)
Service profile> IETF
Default Destination> WiFi
Public username: sip:[email protected] (Input your VoIP provider info)
Use compression> No
Registration> When needed
Use security> No
Then goto Proxy server:
Proxy server address> siproxy01.sipphone.com (use your provider proxy address setting)
Realm> proxy01.sipphone.com (use your provider setting)
Username> (use your username)
Password> (enter your password0
Allow loose routing> Yes
Transport type> UDP
Port> 5060
Go back and then go to Registrar server:
Registrar server address> siproxy01.sipphone.com (use your provider Registrar setting)
Real> proxy01.sipphone.com (use your provider setting)
Username> (use your username)
Password> (enter password)
Transport type> UDP
Port> 5060
Again folks above is just an example. You must use your provider settings.
Then when you are done go back to:
Admin setting> Net setting>Advance VoIP setting>Create new service> choose the SIP profile shown, e.g. Gizmo
This will configure the VoIP setting with the particular SIP profile. It will also add a SIP Tel profile Pane in your Contacts folder, Internet call option to the contacts list and Phone log.
Now go to the SIP pane in Contacts folder, sign in and then make a test call . To make a SIP call just go to a contact and choose Internet call. If you configured everything correctly, it should work and you are done.
For 3G connection, follow above direction and create new SIP profile with new name (e.g. Gizmo (3G). All settings are same except:
Default destination>Internet
Then set up the VoIP setting with the new SIP profile by going to:
Admin setting>Net setting>Advance VoIP settings>Create new service> Choose the SIP profile you just configured e.g. Gizmo (3G)
Then:
Admin setting>Net setting>Advance VoIP settings>VoIP service>choose the 3G SIP profile, e.g. Gizmo (3G)>Profile setting>>>>>
Go down to AWCDMA> set it to "on"
Exit out of everything. Go to SIP (3G) pane in the Contacts folder. Sign in and make test call.
I have configured many Mobile phones and found the N8 somewhat touchy. But, the sound quality on Gizmo VoIP using both WiFi and 3G was great, no echo or any problems.
Useful hints:
If it does not connect or make a call, you need to check the SIP setting for any error. If you find any problem there, you must first remove the SIP profile in the Net setting. Then go to the SIP setting and correct the problem. Double check everyting, go back to Net setting>Advance VoIP setting>Create new service and add the SIP profile. The reason is that when you Configure a VoIP setting with a SIP profile, the SIP info is permanently loaded and will not change even if you make any change in the SIP profile. So any time you change anything in the SIP profile (even the password) you always need to remove, make correction and then reload the corrected SIP profile to the VoIP setting.
There are also few Mobile service providers who have blocked VoIP on their data network service. So, just check with your service provider. In US both AT&T and TMobile have open network for VoIP.

Hi
I have an unbranded N8 and am trying to get VoipCheap to work.
I have tried to set up VOIP but still facing a problem or 2 so please assist me.
I have an active account via VoipCheap.com with a profile name and password and it is verified.
1/ When I look in Admin Settings / Sip Settings it shows VoipCheap with "not registered" under it..why?
My settings when I click on VoipCheap are:
profile name: VoipCheap
Service profile: IETF
Default destination: Internet
Public username: sip:[email protected]
Use compression: No
Registration: When needed
Use security: No
Proxy server address: sip:sip.VoipCheap.com
Realm: VoipCheap.com
Username: [email protected]
Password: ****** (I have entered my password)
Allow loose routing: Yes
Transport type: UDP
Port: 5060
Registrar server settings same as Proxy server settings.
I have also gone to Net settings / VoipCheap settings and see:
Username: sip:[email protected]
Password: ***** (I have entered my password)
Default service: No
Service connectivity: Internet
In Contacts I have a VoipCheap tab with the icon for internet calling and it says
Sign in (example)
but when I click on this it shows connecting (via my internet connection) but hangs there - it does not seem to connect............
what do you think I am doing wrong, please ????????????????

Nokia X6 voip support

Hi guys, does anyone know if Nokia X6 can support voip or sip? I have searched in forum and Google but to no avail. Its not clear whether it can support voip. I am looking to buy X6. If it doesn't have voip, I might have to go for Nokia E71 which can support voip. Can anyone confirm whether X6 has voip?
Thanks in advance.

Yeah, I heard with fring there is a long lag as the traffic is diverted through their server before your voip provider. It doesn't directly connect to your voip provider and it might not use the desired voice codec. There is sip voip setting available for download for S60 v 5.x which is what Nokia X6 using.
http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...
Does anyone know if this will work? Although Nokia X6 is not listed in voip supported mobiles. Maybe someone with X6 mobile can shed some light on this?! Much appreciated.
http://www.forum.nokia.com/Technology_Topics/Mobile_Technologies/VoIP/Nokia_VoIP_Framework/VoIP_supp...

Gizmo VoIP on E71/72

Hi, I would like to know please if anyone is using their Gizmo VoIP configurations to make VoIP calls. I am using Fring, set up with my Skype. There is definately a lag in the call. Even on WiFi there is a lag. I cannot notice any difference between the call quality between packet data 3G and WiFi for VoIP. Is it any better on the E72? Is the bottlneck the data connection? Should I wait for Nokia's 4G phones to come out? any comments would be appreciated. Thank you.
Nokia E65, E71-2 (30) [410.21.010 RM-357]

Hi ,I'm Using Gizmovoip as my voip calls for incoming and outgoing,through wifi, i believe you need to install sip voip setting 3.x first, and then under netsetting download gizmovo ip, plus check your router setting for port forwarding ,give your phone a static IP and put that IP on DMZ, would prolly work out,give it a shot my incoming calls works flawless & out going at times get lags, that's cause of jitters in connection through ISP

Nokia N82 VOIP problems

I have VOIP set up on my N82.
It works perfectly if I put the IP address of the VOIP server in, and remove it for the realm and proxy. However, I need to do this every hour or I get 'registration failed'
Any ideas? It's becoming really annoying!

TheTaZ wrote:
Hello,
I want to use E51's VoIP function but i don't have any "Internet Tel" pictogram.What can I do.Do I need to update my fireware or there is any program?.
Thanks in advance,
TaZ
What do you exactly mean by saying "i don't have any "Internet Tel" pictogram"?
The built-in SIP VoIP client is there, and it is at Rel. 2.3 level.
You first have to choose a SIP provider, sign up for his services, buy some credit, ask for his typical settings, add your credentials, and create a SIP profile.
You will then be able to define an Internet Telephone call profile.
To attain better control over parameters of the SIP profile that are not accessible to the user, it is recommended to install the proper SIP VoIP Settings Software:
http://www.forum.nokia.com/info/sw.nokia.com/id/d61bd0ec-1304-45dd-9283-63d631cb86b1/SIP_VoIP_Settin...
For the E51 - select the 2.x version (approx. 88KB)
Did you read the E51 Guide?

Nokia E55 internet call setting

I recently bought a Nokia E55 with great hope, and did the SIP VOIP setting, and registered to the provider Jumblo.
I tried to call a friend of mine via internet but I couldn't. There was not the internet call option to be choosen. The instruction on setting the internet call in the manual is misleading. Does the software (2.1) of E55 contain the internet call option?
I'm hoping to get a quick answer from some guru to solve the problem.

i have a e55
me also waiting for the answer

E72 & VoIP

On the Nokia website (http://europe.nokia.com/get-support-and-software/learn-how/internet-calling/get-help) it says:
Which Nokia phones contain the Nokia Internet calling client?
Nokia E51; Nokia E60; Nokia E61; Nokia E61i; Nokia E65; Nokia E70; Nokia E90; Nokia N80 Internet Edition; Nokia N800 Internet tablet; Nokia N81; Nokia N81 8GB; Nokia N810; Nokia N82; Nokia N95; Nokia N95 8GB"
There appears to be no mentioning about VoIP for E72. Can anyone who already has this phone explain if this function is supported on Nokia E72. I do not mean Fring or a similar 3rd party application, rather original Nokia "Call Over Internet" option when selecting a number. For instance for use with
I am not an expert in this so my apologies if above statements are wrong.
Ideally it would be good to have a clear web page from Nokia about this issue. for non-experts.
Thanks in advance!
Solved!
Go to Solution.

Can you really install http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin... sip VOIP Setting cause on my e72 when I try and after checking the certificate the phone say "not supported"...
Any update will come soon ??? otherwise without it this phone is useless compare to previous model

WRP400 - cannot access VOIP setup - is there a different password?

i have set up my wireless using the WRP400 but i cannot access the voip set up. the same password "admin" will not work. my isp is iinet in australia.
thanks in advance for any help

These products are being handled by the Cisco Small Business Support Community. (URL: https://supportforums.cisco.com/community/netpro/small-business)

Configure goandcall SIP calls on E61i

Hi All,
I have configured goandcall SIP service and it got registerd on my nokia E61i. The problem is I cannot make outgoing calls. On the other hand when I configure the same on Fring with username, password, proxy : sip.goandcall.com
I am able to make both mobile and landline calls.
Please advice if there is any advance settings I have to make on my mobile. I have installed the nokia SIP_VoIP_Settings_v1_0_en software and set priority of codec G729 but no help.
Regards,
Abhi.

I found the solution for this.
On Nokia E series devices, you need to install a software from Nokia SIP_VoIP_Settings_v1_0_en at the URL : http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...
When you install it, you need to go to Menu -> Installation -> SIP VOIP Setting -> NAT firewall Settings.
Here you need to configure the Domain parameters for sip.goandcall.com and put the value of STUN server as provided on your website.
Please note, we do not need to configure the outbound proxy in E61i ( referred as Proxy Server).
The reason we need to install the above software is because I could not find advance settings in Nokia to configure STUN server.
Hope this info helps.
-Abhi.

Questions for QoS on switches

Hello Experts,
I currently have QoS settings on my switch:
class-map match-any VOIP
match dscp cs5
match dscp ef
class-map match-all VIDEO_Conference
match dscp af41
class-map match-all ROUTING
match dscp cs6
policy-map myLAN
class VOIP
set dscp ef
class VIDEO_Conference
set dscp af41
class ROUTING
set dscp cs6
interface g1/1
ip address 10.10.12.1 255.255.255.0
ip pim sparse-mode
service-policy input myLAN
service-policy output myLAN
I understand that the class-map is for defining the traffic and policy-map is for creating policy for the map traffic. But still confusing the ways they're working.
For this example:
class-map match-any VOIP
match dscp cs5
match dscp ef
How do i know that VOIP packet is cs5/ef? are there any predefined info for VOIP packets? what are cs5 and ef really playing the roles here?
Thanks.

Hi,
Thanks for the reply, for this CS5 again:
class-map match-any VOIP
match dscp cs5
match dscp ef
I've checked from my switch:
Switch(config-cmap)#match dscp ?
<0-63> Differentiated services codepoint value
af11 Match packets with AF11 dscp (001010)
af12 Match packets with AF12 dscp (001100)
af13 Match packets with AF13 dscp (001110)
af21 Match packets with AF21 dscp (010010)
af22 Match packets with AF22 dscp (010100)
af23 Match packets with AF23 dscp (010110)
af31 Match packets with AF31 dscp (011010)
af32 Match packets with AF32 dscp (011100)
af33 Match packets with AF33 dscp (011110)
af41 Match packets with AF41 dscp (100010)
af42 Match packets with AF42 dscp (100100)
af43 Match packets with AF43 dscp (100110)
cs1 Match packets with CS1(precedence 1) dscp (001000)
cs2 Match packets with CS2(precedence 2) dscp (010000)
cs3 Match packets with CS3(precedence 3) dscp (011000)
cs4 Match packets with CS4(precedence 4) dscp (100000)
cs5 Match packets with CS5(precedence 5) dscp (101000)
cs6 Match packets with CS6(precedence 6) dscp (110000)
cs7 Match packets with CS7(precedence 7) dscp (111000)
default Match packets with default dscp (000000)
ef Match packets with EF dscp (101110)
when it says 'cs5 Match packets with CS5(precedence 5) dscp (101000)', does that mean the network packet's binary has to match this binary 101000 to able to define it as cs5?
I need to wrap my head around this QoS since i've been having a serious confusion about this QoS things. How would you explain this below in our language?
class-map match-any VOIP
match dscp cs5
match dscp ef
policy-map myLAN
class VOIP
set dscp ef
interface g1/1
ip address 10.10.12.1 255.255.255.0
ip pim sparse-mode
service-policy input myLAN
service-policy output myLAN
Thanks a lot!

RV220W Beta Firmware 1.0.4.17

Is anyone else using the Beta firmware?
There are some improvements.
One can now view alerts and notifications within the software.
Also it appears as if the Protect Link Block Page was reworked to allow direct acces to Trand Micro Website for checking out Blocked URLS.
I also think CPU and memory usage is much improved.
Small Business Support can provide the firmware.

I agree with the thought of Cisco needing to take the SMB market seriously.
I suppose some of the issue, like you alluded to is the division of the products between
Enterprise, Enterprise for Small Business, & Small Business.
Enterprise Grade products are Configurable,Complex & not Plug & Play. Their small business counterparts on the contrary need to be easy to use & easy to setup, but instead they retain some of the complexity of their big brothers.
I was advised to buy an SA520, but chose the RV220W because of price.
That said I do like my RV220W over the Sonic Wall TZ100. As far as ZYXEL their product lijne is somewhat limited.
With Cisco I know they have a full line-up of compatible products for the majority of my needs.The products are well built & generally work well with one another.
I do really like the QOS per VLAN on the RV220W as well as the Protect Link Filter. Also the SSL VPN Portal is a really neat idea -it just doesn't work in Windows 7.
Hopefully we see some of the issues addressed in the next firmware update like slow DHCP assignment, lack of clear logs for Protect Link, & an Easy VPN setup wizard. Actually setup Wizards for everything would be great.
Feature Requests:
Port Forwarding Wizard
Protect Link Wizard
VPN Setup Wizard
QOS Setup Wizard (with AUTO VOIP setting?)
Live logs from all systems including Protect Link.
IPS (in a simplified form)
Connect Protect link & Firwall Conten Filtering.
Allow SSLVPN Portal to work with Windows 7, Windows 8, IE9, Firefox, & Chrome.

Help in QoS configuration on 3750E/2960X

Hello everybody,
I would like to configure QoS in VoIP for terminal Aastra in switches Cisco (with L3). As I am not very confident in this issue, I have thought to give a priority for VoIP considering output traffic from IP telephone. The IP telephones have an IP in range 10.5.160.0/22, so could it be this criteria valid for assigning QoS to the VoIP packets? The criteria would be:
ip access-list extended tel_VOIP
permit tcp 10.5.160.0 0.0.0.252 any
permit udp 10.5.160.0 0.0.0.252 any
Class-map match-all VOIP
Match access-group name tel_VOIP
Policy-map VOIP
Class VOIP
Set ip dscp 32
And then for the access voip ports, I would put this:
Interface giga0/x
switchport mode access
service-policy input VIDEO
service-policy output VOIP
switchport voice vlan 6
switchport access vlan n
mls qos trust dscp
power inline consumption 5000
Also I have another policy-map configured for input traffic for video which gives it pri 32.
I would like to know if traffic with maximum priority goes by queue out nº 1 by default. And if so, if this would be enough to guarantee video and voip traffic would go by this queue, which has by default 4 Mb shaped. Our video only takes 256Kb.
Another thing is if more than 4 Mb were needed in queue out, a way to assure video and voip traffic would be to configure this queue as priority queue-out, wouldn’t it be?
Please, I do not know how to configure queues and I only want to know if this would categorize voip and video traffic with a dscp of 32.
Thank you very much.
I am a bit lost about this item. And that is why I would prefer not configuring different weights for the out queues if not necessary. Please, make me any comment. I could send you my configuration.

hello Yahsiel,
Well, I must have mismatched signaling value with voice traffic value. What I would like to do is marking voip traffic and then reserving a bandwith for it.
I have investigated and voip traffic comes marked with CoS 5, so I suppose I do not have to create an access-list, I could create a class-map for voip:
class-map VOIP
match ip precedence 5
and then reserve BW for it:
policy-map VOIP-VIDEO
Class VOIP
priority 1000
and then I could also set this policy in all the access ports with:
service-policy input VOIP-VIDEO
I suppose I could include in this same policy-map the marking of VIDEO traffic which is:
class VIDEO
set ip dscp 32
Also as you say I will have to put in the access ports the "mls qos trust cos" and in the trunk "mls qos trust dscp".
Do you think now this would guarantee 1 Mb for voip in the out queue? Out queue 1 has a total of 4 Mb maximum shaped so I think this would run....
What about "auto qos voip trust" in the interface level for all the ports? Some people tell me this run ok, but I do not know if I must configure it or not. If I configured auto qos, I think I wouldn't have to policy voip traffic.
Thank you for your soon reply. Really!!!

IChat4 each client can video chat with test accounts but not each other

I have two machines with iChat4. Each machine can video chat with the apple test accounts but the dreaded error 8 when trying to chat with each other.
Any Ideas?
Thanks
Dan

Ok,
In the Netopia turn the Firewall to Off as the settings LOw and above have some of the features I was talking about (DOS and SPI protection and Ping Blocking.)
For the TZ-180 I can only find info on the TZ -170
This site tells you how to do Port Forwarding.
The main point off linking you to it is it also tells you the default Access Info.
It is likely to be the same for this device your Buddy has.
I would not do the Port Forwarding straight away.
I would check the menu items to see if it has UPnP and that it is Enabled rather than Port Forwarding.
I would also check for the features or the wording of any firewall before resorting to setting the Port Forwarding.
I notice that the TZ-1 70 pics that site has also shows that that particular device has a VoIP setting.
IF the 180 has this we will need to know what it says and what the wording is and if the service is used.
8:10 PM Friday; July 18, 2008

Voip set up

Similar Messages

Maybe you are looking for