VOIP setting on the n8 (SIP)

So i was trying to get VOIPCHEAP to work on my phone, but after going through all the settings, the VOIP tab did not come up on my phonebook...as it should automatically be. Instead, it comes up when i click on one of my contacts. When i click on this though, the phonebook closes. Has any one heard of this problem before? Any solutions?

To follow up on my previous post - I've found those settings for the native VoIP client in the N8 to be unreliable. Sometimes the call will work, sometimes (more often than not) it won't. I'm wondering if being behind a router with NAT is causing the problem as the voip service is registered but it seems to be establishing the calls that's the problem.
As a workaround I decided to try the software supplied by voipcheap:
http://www.voipcheap.com/en/mobilevoip.php?phonetype=symbian
It seems to be lightweight and all calls worked 100%. Call quality was ok too.
Two main issues:
i) while it is running (and after exiting) my phone's contact list is completely empty!? Quite a shock the first time I saw that! However, if you go into the call log it seems to make the contact list work again. Phew.
ii) I think it assumes the phone has call/end buttons as on the N8 the only way I can find to hang up a call is to exit the program
If anyone has native settings for voipcheap/buster etc. that work 100% behind a router/NAT then please post...

Similar Messages

How does a 4G VoLTE UE know the destination SIP URI format to create the SIP INVITE

This trace is the output from an ASR500 for a VoLTE call,
For VoLTE the UE and IMS core network must support Public User Identities as defined in section 13.4 of 3GPP TS 23.003, which includes all of the following types of addresses:
•Alphanumeric SIP-URIs
sip:[email protected]
•MSISDN represented as a SIP URI:
sip:[email protected];user=phone
•MSISDN represented as a Tel URI:
tel:+447700900123
sip:[email protected]
In the SIP SDP you will see: sip:[email protected]
Mobile Originating UE:        sip:[email protected]
Mobile Terminating UE:        tel:+14047808898
Notice the two different formats.....
Below in the initial SIP INVITE you will see that the MO (Mobile Originating) sends the SIP URI in the proper format (1 of 3) to the MT (Mobile Terminating 4G handset).
My questions is: does the MO know the SIP URI format of the MT (User Endpoint / 4G smartphone) because it has some sort of Address Book, or is that the designated format for a SIP INVITE   (to: tel+###########) because he MO knows the MSIDSN (tel number) dialed .
I do not understand how the MO knows how to format the SIP URI format of the MT (Mobile Terminating) and would appreciate any insight into this.
PROTOCOL PAYLOAD FOLLOWS:
2600:100c:8221:6dc9:f77a:8b7:5e38:a5d5.60717 > 2001:4888:3:fe0f:c0:105:0:17.5060: . [tcp sum ok] 1:1357(1356) ack 1 win 214 <nop,nop,timestamp 64706 423317258> (len 1388, hlim 64)
PROTOCOL PAYLOAD ENDS.
PDU HEX DUMP FOLLOWS:
0x0000 30ff 0594 c20d 0073 6000 0000 056c 0640 0            ......s`....l.@
0x0010 2600 100c 8221 6dc9 f77a 08b7 5e38 a5d5 &          ....!m..z..^8..
0x0020 2001 4888 0003 fe0f 00c0 0105 0000 0017                ..H.............
0x0030 ed2d 13c4 e245 e405 fcb6 417e 8010 00d6                .-...E....A~....
0x0040 f720 0000 0101 080a 0000 fcc2 193b 4f0a                 .............;O.
0x0050 494e 5649 5445 2074 656c 3a2b 3134 3034               INVITE.tel:+1404
0x0060 3738 3038 3839 3820 5349 502f 322e 300d                7808898.SIP/2.0.
0x0070 0a4d 6178 2d46 6f72 7761 7264 733a 2037                .Max-Forwards:.7
0x0080 300d 0a52 6f75 7465 3a20 3c73 6970 3a5b                0..Route:.<sip:[
0x0090 3230 3031 3a34 3838 383a 333a 6665 3066                2001:4888:3:fe0f
0x00a0 3a63 303a 3130 353a 3a31 375d 3a35 3036                :c0:105::17]:506
0x00b0 303b 6c72 3e0d 0a56 6961 3a20 5349 502f 0               ;lr>..Via:.SIP/
0x00c0 322e 302f 5443 5020 5b32 3630 303a 3130 2.               0/TCP.[2600:10
0x00d0 3063 3a38 3232 313a 3664 6339 3a66 3737                0c:8221:6dc9:f77
0x00e0 613a 3862 373a 3565 3338 3a61 3564 355d                a:8b7:5e38:a5d5]
0x00f0 3a35 3036 303b 6272 616e 6368 3d7a 3968                     :5060;branch=z9h
0x0100 4734 624b 3030 3033 3335 3933 2d31 6361                G4bK00033593-1ca
0x0110 6630 3633 340d 0a43 5365 713a 2031 2049                f0634..CSeq:.1.I
0x0120 4e56 4954 450d 0a46 726f 6d3a 203c 7369                NVITE..From:.<si
0x0130 703a 2b31 3931 3236 3735 3738 3639 4076                p:+19126757869@v
0x0140 7a69 6d73 2e63 6f6d 3e3b 7461 673d 3534                  zims.com>;tag=54
0x0150 3436 375f 3030 3033 3339 6130 2d33 6665                467_000339a0-3fe
0x0160 3439 3434 380d 0a54 6f3a 203c 7465 6c3a                49448..To:.<tel:
0x0170 2b31 3430 3437 3830 3838 3938 3e0d 0a41                +14047808898>..A

Hi Tod,
The "session target registrar " point to the SIP-TRUNK to the PSTN, as detailed exaplaination:
session target (VoIP dial peer)
To designate a network-specific address to receive calls from a VoIP or VoIPv6 dial peer, use the session target command in dial peer configuration mode. To reset to the default, use the no form of this command.
A ideal situation would be to use session target ipv4: of the ITSP:
dial-peer voice 105 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 91%...........
session protocol sipv2
session target ipv4:11.11.11.11:6034 <<(1st SIP-TRUNK)
voice-class codec 2
dtmf-relay rtp-nte
no vad
dial-peer voice 106 voip
description **Outgoing 2ND Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 91%...........
session protocol sipv2
session target ipv4:22.22.22.22:6035 <<(2ND SIP-TRUNK)
voice-class codec 2
dtmf-relay rtp-nte
no vad
Rate the post accordingly.
Regards,
Kevin

VoIP Pilot and the info or Point one need to know ?--URGENT

Hi There,
As the subject say, is the Cisco way of VoIP solution is the best of industry. currently we are running a VoIP pilot with Cisco provided solution but just was cusrious that
1)WHAT ALL ONE NEED TO LOOK OUT AND KEEP IN MIND WHILE DESIGNING A VoIP SOLUTION FOR EXISTING TELEPHONY SETUP?
2) IS ONE GO FOR H.323 OR SIP BASED SOLUTION OR SCCP.. WHAT FACTORS TO KEEP IN MIND TOWARDS SELECTION one of this protocol..
Thanks in advance and eagerly await your answer..

Hi,
to keep one Point in mind will not help...
There are many factors and no "One fits all" solution. So in general: know your requirements, know your constraints, keep an eye on budget and do not forget to get early enough the proper skill level for your staff to operate the solution.
Best starting point for technology related information would be to read through the "Cisco IP Telephony Solution Reference Network Design" guides.
Examples:
Cisco IP Telephony Solution Reference Network Design (SRND) for Cisco CallManager 4.0 and 4.1
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00805fdb7b.html
MeetingPlace 5.3 Solution Reference Network Design (SRND)
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns268/c649/ccmigration_09186a00805749ac.pdf
More can be found at
http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_packages_list.html
Hope this helps! Please rate all posts.
Regards, Martin

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpful

To whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.

TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How to set up the communication channel for third party idoc

Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.

Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger

Cannot add hub-managed content type with external list lookup columns to a list -- Error:Id field is not set on the external data field

This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
Thanks

The issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you.

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?

If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB.

HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

Email will not setup "Do you want to try setting up the account without SSL"

email will not setup, get message "Do you want to try setting up the account without SSL"

Is that a question? hard to tell
How about some info
What email (yahoo? gmail? compuserve?)
On what (the ipad? vista?)
Did you do anything in response to the question other than post here?

How to set/get the values thru Wedbynpro coding for User mapping fields

Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha Rani

Hi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani

I can no longer use my aol on mac mail. When I set up the aol account name and password I get a message that says "Unable to verify account name or password". This is on all my Apple devices. Seems like an AOL server issue but no help from them!

I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices

Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
Matt

VOIP setting on the n8 (SIP)

Similar Messages

Maybe you are looking for