VOIP setup for the lab

Next year we are planning a VOIP migration for some of our in house users. We dont have any WAN connections and bandwidth between floors are gigabit.
What I am looking to do is buy a small setup for our lab this year so I can begin to learn about VOIP etc. So far I have researched and this is what I am considering buying.
- Cisco 2801-V/K9
- VIC2-2FX0 voice interface card
- 3560 24 port 10/100 POE standard image
- 5 7940G ip phones.
Is this a decent setup for the lab ?
Would it allow me to configure a basic voip setup and learn the fundamentals of configuring VOIP ?
Any help would be appreciated.
Cheers
Dave

Hi Dave,
You can probably get away with this for even less.
You could probably get something like a 1751-V with PVDM-256k and VIC-2FXS with the IP phones. You may need the power bricks in this scenario.
Alternatively,
CISCO2621XM with NM-2V with VIC-2FXS and the phones/bricks
But yes, your current setup will work. You would need to add something like a PVDM2-8, PVDM2-16, or PVDM2-32 for DSP resources, with the number depending on whether or not you want to play with transcoding/conferencing.
hth,
nick

Similar Messages

Team Calendar warning - No Team setup for the user in the selection period.

Good morning,
I am attempting to replace the older iViews (leaverequestapprover and teamcalendar) with the newer iView (approveleaverequest) which seems to combine the two functions.
When implementing the approveleaverequest iView, I get the following mesaage "No Team setup for the user in the selection period. Contact Administrator."
However, looking at the older Team Calendar iView, teamcalendar, I can see the team. Both iViews are assigned to the Team page for comparison.
Not sure what's wrong but I'm confident I have all the configuration correct else the test team members wouldn't be appearing in the older iView. I've read some other unanswered posts that asked the same question and rechecked all the objects people had suggested.
What's even more puzzling, if I have one of my managers submit a leave request to their manager, the approveleaverequest iView will show the entire team with the leave request for the manager waiting for approval.
I'm stumped and could use some guidance on how to get the team calendar to work.
Kind Regards,
Garrett Meredith

Re: Manager unable to approve employee leave
chk above thread once and chk any authorisations are missing or else assign and test once for some users
and you need to activate wdabap business function ess_wda_2 in swf5 if ur using abap functionality HCM, ESS on Web Dynpro ABAP 2 - Human Capital Management - SAP Library

[svn:osmf:] 13121: Moving the setup for the default control bar into a DefaultControlBar class .

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

TS3991 When I try to use Outlook Setup for the iCloud on my PC I get an error message at step 2 of 7 Download Calender from iCloud as follows: "your setup couldn't be started because of an unexpected error"

When I try to set up MS Outlook using Outlook Setup for Icloud it fails at step 2 of 7 Download Calender from iCloud with error message "your setup could not be started because of an unexpected error" My iCloud calender in Outlook had previously been working, but was not reflecting the same scheduling information, so I tried to delete it and reinstall using the Outlook Setup for iCloud.
How can I get it to work again?

Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H.

Anyone have a Multi Instrument setup for the MO6?

I just got a MO6 workstation to integrate into my studio
setup. I was wondering if anyone has this keyboard
(or the MO8) and has a Multi instrument for it setup
in the enviroment. I am trying to not have to input
all the names of all 16 instrument banks. I tried
doing an Google and forum search with no luck.
The thing is impressive sound wise and will be
easier to edit with the free software available.
Only wish Apple would get their support online.
Yamaha did thier end with the remote control
feature. I can put it into Remote control with
one touch and start controlling Logic from the
keyboard. Every button has a dual role, one for
the workstation and one for Logic. Very cool feature.
Thanks in advance, Phil
http://static.flickr.com/67/160620209_6397f36fd1.jpg?v=0

Sorry, I only have the original Motif 6 environment,
but I wanted to ask you how you like the MO6?
Have you used the original Motif at all? I'm thinking
about saving up to get a MO8 because of the weighted
keys, and having the ES sounds only helps.
Thanks for posting,
I have not used the original Motif at all but am loving the MO6!
I am primarily a guitar player but since getting this board my inner
keyboard self is coming out. Sound On Sound has a review of
the MO6 in Junes issue. I recieved my copy a week after purchasing
the MO6 and was glad to see their positive review.
I would recommend the MO8 for the tone generator alone and as SOS put it,
you got to love that arpegiator! Everything else to me is icing.
I will have to check out the Motifator web site. That is probably my best
chance at getting the enviroment for the MO6. Thanks again for taking
the time to post.

SMD Wizard Setup for the Portal-solution

Hi!
I would like to set up Diagnostics via SMD Wizard for the portal solution.
The problem of the execution is all the 12 steps were ended without success.
The error by first 4 (all of type: HTTP) is:
P4 port is unknown. System cannot be set up.
If I go back I can see that P4 port is setting as "0".
Can some one help me to solve this problem?
Thank you very much!
regards
Thom

Hi Thom,
I do not undertand you, by running the URL, I gave to you, you should have:
version 1.0
J2EE19192200
J2EE     host     50100     LB=1
J2EES     host     50101     LB=1
P4     host     50104     LB=1
P4S     host     50106     LB=1
P4HTTP     host     50105     LB=1
JC_host_SM9_01
SDM     host     50118
then P4 -> is 50104.
You need to adapt it the managed wizard.
New version of the setup is availalbe in http://service.sap.com/diagnostics with information about the wizard.
Regards,
Frederic

Starting tips for the labs

When completing the lab exercises for this course you should be aware of the following:
1) Follow the instructions in the lab guide very carefully. The lab guide has
been constructed to give you step by step instructions, be sure to follow all
of them. In particular, after you have completed the installation of WebLogic
Server be sure to complete step D of Lab01 (page 12 & 13). This creates the test
domain which will be used for the remainder of the exercises.
2) Remember that Java, XML and some parts of URLs are all case sensitive. Be sure
that your instructions, code and entries in any XML files are all in the appropriate
cases.
3) The student scripts provided in the %STUDENT%\bin directory are batch files
to call various specific Ant tasks and the bin directory should be included in
your PATH environment variable (use the promptBEA or setenvBEA scripts to ensure
your environment is properly configured). This is done to hide some of the complexity
of the various build processes. If you would like more to see more details inspect
the appropriate Ant XML files.
Good luck and enjoy the exercises. If you have any questions be sure to post them
here with an subject title that has the format
<meeting #> - <lastname> - <lab##> - <description>
Adam

Sorry to hear about your troubles, but I am glad it is working correctly now.
Enjoy your Zen!

Best possible setup for the future

I am going to ask a generalized broad question. First some background, then I would appreciate your input.
Used mac desktops up until now. Primarily storage reasons. I am sending my daughter off to college this fall and decided to get our first laptop, nice zippy macpro 15". I have to say I'm very happy stealing this laptop from my daughter. I thought I would not want to do so much picture processing on such a limited screen, as I'm used to two landscape monitors.
The database for Aperture right now is almost 400 gigs. I used managed files. I initially thought about upgrading my old desktops to a new super powerful desktop in the next year of so, as I'm still using powermac PCs.
I wasn't going to consider a laptop as a serious contender for primarily the storage issue.
Enter thunderbolt.
Now I'm scratching my head and wondering about the potential to utilize this seemingly potential I/O as a game changer to the deal.
#1 - I'm not in a hurry. Time is on my side.
#2 - in the past, desktop Vs laptop was a no brainer to me. That gap has narrow now. The primary issue was screen space and storage, mostly storage/speed really.
#3 - speed gap from laptop to desktop is nominal at best from what I can tell, am I correct in seeing this now as not as clear an advantage of a desktop?
#4 - if I'm understanding thunderbolt right (and since time is on my side), I could potentially have a laptop with some lug around peripherals that would nearly make this like a desktop on the go. Sit down and plug into multiple monitors in a flash with RAID extensions, who knows what. Maybe then grab a raid cube and run with it to a place and essentially take my "desktop" environment with me. Am I thinking straight here or being a bit to idealistic? Seems like that it where Apple/intel is headed with this
#5 - managed Vs referenced. I've read a little about this debate and approach. I've only gone with managed and probably will do so, but in light of what I've said above, any comments?
#6 - backup. Always the biggie for me. backup. I love redundancy. I have time machine this and that thrown around in duplicity, copy over mirror drives here and there, and even put an extra drive or two in a neighbor's closet x2 a year just as an offsite backup in case of catastrophic loss like fire/theft. I'm not crazy over such a fragmented multiple approach, but haven't found what I consider a good alternative just yet to something simple, straightforward, and trustworthy. I'm hoping thunderbolt might lend a whole new ability to move quicker through backup scenarios. Thoughts? What are your approaches when you have a life's work of digital pics and videos and just can't stand the thought of ever ever losing them?
#7 - I would love to have an offsite online backup option for everything, seems that would solve so much of my backup stuff. But as a home user that is seriously into digital whatever, I haven't seem to run across something good as I've been limited to slow upload speeds. Until now. Enter FiOs. I can now(supposedly) do 32 up and down on the Fios, the fastest I think I will be able to get without going to a major business type connection. Does anyone have any knowledge of anything that would be a solid online backup option for 2TB or more of data on a revolving basis? I want to overshoot a bit as I seem to be picking up memory usage quickly with shooting in all RAW now and using higher density HD video. Opinions?
Having said all that, I hope what is coming across is that I'm looking at basically going from a guy who had an old powermac and found he is good at video, photos, and all things fun like that. Expanding into business sides of it slowly, seeming to have good luck, sending a daughter off to college introduced a surprising element to me of a powerful laptop, and now I'm grappling with onsite and offisite storage. Future expansion. thunderbolt potential.
I would appreciate some of you who have much more seasoned interactions with higher end equipment and can appreciate some of the details, if you could give some insight into what might work, might not, how to posture myself the best for future expansion and capabilities, etc. I'm not too worried about price. Obviously I'm a home user, so I don't have a corporate account. But dropping 10 - 20 grand in the next 2 or so years wouldn't be unreasonable if it were to posture me for the best potential use for many years.
Thanks,
Robert

TexasMan_Luvs_Hismac wrote:
The database for Aperture right now is almost 400 gigs. I used managed files. I initially thought about upgrading my old desktops to a new super powerful desktop in the next year of so, as I'm still using powermac PCs. I wasn't going to consider a laptop as a serious contender for primarily the storage issue.
#3: At the moment (until MPs are upgraded) the top new MBPs are stronger Aperture boxes than many Mac Pros are. IMO the first true desktop replacement (DTR) laptops. Stick to the stronger graphics options and I very, very strongly recommend the anti-glare display choice.
#5: Managed files are IMO not the way to go for many reasons, and certainly not on a laptop. I recommend using a Referenced-Masters-Library on the internal drive with Preview size set to be the size of your laptop display. Have two large external drives: one for Masters and Vaults and one for offsite backup of the other external.
So #6: Backup is easy, just add more off site drives for more redundancy and change them out frequently (at least weekly or every significant project). For images work mirrors tend to be a waste of drive space. Far more worthy is more frequent real offsite backup. Note that simple changeout of a 2-TB drive to the trunk of the car provides real backup against fire, theft and drive failure.
Originals should be backed up before import into Aperture or any other app anyway. A Managed-Masters-Library not only gets itself ridiculously large, having Masters in Vaults just makes Vaults huge and Vault backups slower, and therefore less likely to be done as frequently.
#4: Yes. Tbt may have some growing pains but I think your insight is accurate. However even without Thunderbolt using a Referenced-Masters-Library with Masters accessed over FW800 i/o is ok. Key is that the Library lives on an internal drive that is kept underfilled, which is easy once you use a Referenced-Masters-Library with Masters on external drives.
Personally I just ordered a 17" 2011 MBP with SSD and am replacing the optical drive with a 750 GB 7200 rpm OWC drive. The Referenced-Masters-Library will live on the SSD while Masters will initially live on the OWC drive then later get relocated to external archive drives.
#1 - I'm not in a hurry. Time is on my side.
Since you are using a Powermac now, I respectfully disagree. Life is short: get thee to a Sandy Bridge MBP asap This new MBP is literally what mobile Aperture users like me have been waiting for since v1.
HTH
-Allen Wicks

Please ... tell me how to download and instale the setup for the SQL Server Express 2012

My OS is 32-bit and i have already downloaded the SQL Server 2012 Express but i cant find the SQL Server Management studio so please tell me how can i get it?

Hello Muhammad,
if you already install SQL server, to run the Managment Studio you can click Start and Run, and type "SSMS".
Of course you can create a shortcut and look for the file (this is the installation location you selected during the installation process) using the Windows search (pressing F3 activates the search).
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP |
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Need help setting up a virtual switch setup for my lab.

Hi,
I used to be able to get this to work. But, I'm not able to anymore.
I have two network cards in my PC.
#1 Is what I use for everyday use and it's configured to use :
IP: 192.168.0.2
GW: 192.168.0.1
DNS : 192.168.0.1 (Router address)
#2 Is setup to use
IP: 192.168.0.3
GW: 192.168.0.1
DNS : 192.168.0.1 (Router address)
Then I create a Virtual Switch in Hyper V Virtual Switch Manager and bind it to Network Card #2.
This creates the Hyper V Virtual Ethernet Adapter that I bind my VM's to.
But for some reason none of my VM's can get a connection to the internet. There is an exclamation mark over the network icon.
When I go back and look at the TCP/IP V4 properties of the Virtual Ethernet Adapter, I release that it has no DNS settings.
But when I put any settings in there it gives me a warning about setting multiple default gateways, and do I want to continue, yes or no?
What could I be doing wrong?
Thanks

Hi midi25,
Then I create a Virtual Switch in Hyper V Virtual Switch Manager and bind it to Network Card #2.
This creates the Hyper V Virtual Ethernet Adapter that I bind my VM's to.
I think you checked the "Allow management operating system ..." , the new Vethernet adapter is a virtual adapter for HOST ( the name same with the Vswitch) .
So , the "multiple default gateway" will arise when you configure GW for it .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

E51 voip setup for Telefin

Hello
I have tried to setup my E51 to use my Telefin SIP account without luck. I hope someone can help.
My current SIP profile settings are the following:
* Profile name: Viop Telefin
* Service profile: IETF
* Default access point:
* Public username: ??
* Use compression: no
* Registration: When needed
* Use security: no
* Proxy server:
* Registrar server
* Registrar server address: sip:ser02.telefin.dk
* Realm: telefin.dk
* Username:
* Password:
* Transport type: Auto
* Port: 5060
the 'sip:' is automatically added to the beginning of the registra server address.
I tried various things as 'public username' but do not know what it is used for.
When I exit the SIP profile setup I get the following message:
"No SIP profiles use WLAN in 'always on' registration mode. Disable 'Show WLAN availability' setting?"
I do not understand this question and cannot figure out what happens in either case.
Hereafter the SIP profile is 'not registered'.
If someone could help it would be much appreciated.
Thanks,
Kim

Hi Dave,
You can probably get away with this for even less.
You could probably get something like a 1751-V with PVDM-256k and VIC-2FXS with the IP phones. You may need the power bricks in this scenario.
Alternatively,
CISCO2621XM with NM-2V with VIC-2FXS and the phones/bricks
But yes, your current setup will work. You would need to add something like a PVDM2-8, PVDM2-16, or PVDM2-32 for DSP resources, with the number depending on whether or not you want to play with transcoding/conferencing.
hth,
nick

Is it possible to access the page setup for the printer from a program unit

Hi guys,
I've done a report and i need to print it with a specified superior margin. This is not the margin that we set in the report edit margin button, this is already set, the problem is the pre-defined margin located in the page setup dialog box.
My question is, is there a way (api, etc...) inside the report in which i can access this page setup and configure that margin with the values that i want, programaticaly (runtime)?
Thanks.

Sorry, the following is the runable one.
package view;
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import oracle.adf.controller.struts.actions.DataAction;
import oracle.adf.controller.struts.actions.DataActionContext;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.BaseBajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.PageBroker;
import oracle.cabo.servlet.event.PageEvent;
public class DataAction2Action extends DataAction {
protected void processComponentEvents(DataActionContext actionContext)
throws IOException, ServletException {
HttpServletRequest request = actionContext.getHttpServletRequest();
String eventName = request.getParameter("event");
if ("test".equals(eventName))
PageBroker broker = (PageBroker)
this.getServlet().getServletContext().getAttribute("oracle.cabo.servlet.PageBroker");
BajaContext bajacontext = new BaseBajaContext(this.getServlet(),
broker,
actionContext.getHttpServletRequest(),
actionContext.getHttpServletResponse());
Page page = bajacontext.getPageDecoder().decodeRequestedPage();
PageEvent pageevent = bajacontext.getPageDecoder().decodeRequestedPageEvent();
super.processComponentEvents(actionContext);
}

External displays - is there a factory default setup for the PB?

I plugged in my 32inch DVI equipped TV into my PB. Everything was was fine until I decided to play with the settings - I switched the primary monitors around, tried different resolutions etc. And now my TV claims that it's incompatible with the fed signal and my laptop doesn't "see" the mouse so I can't switch resolutions back. Any ideas how to get it to work? I tried to reset the display to factory settings but it didn't help.

Hi, tenant. In addition to a brody's suggestion for resetting the Powerbook's display, you may also need to reset the TV by disconnecting it from everything else, unplugging its AC power cord, and letting it sit that way for a while before reconnnecting things. Or there may be some other reset procedure described in the TV set's manual.

WAG54GP2 VoIP Setup

Could someone please help me with a detailed setup procedure for VoIP on the WAG54GP2.

Hi,
several people have commented that this link has helped with VOIP setup for WAG54GP2. You will have to substitute in the appropriate information for you VOIP service provider.
http://forums.whirlpool.net.au/forum-replies.cfm?t=550952
note also the discussion on this unit at http://forums.whirlpool.net.au/forum-replies.cfm?t=512264&p=1

VOIP setup for the lab

Similar Messages

Maybe you are looking for