VOIP Setup - help

First of all I have to tell you I am very new to VOIP ,
I just have a question , Currently I am living in USA but my Home country is Sri Lanka and I want to call my home country numbers ( regular lines and mobile lines) via VOIP , I have DSL line at home in Sri Lanka and here in USA too. Please tell me what kind of setup I need and what kind of equipments I have to buy for this , Your help is much appreciated.
Thank you,

if you have an internet connection working at your place ,you can go for any of the VOIP routers from Linksys .. Get registered to a VOIP provider like Vonage ..

Similar Messages

WAG54GP2 VoIP Setup

Could someone please help me with a detailed setup procedure for VoIP on the WAG54GP2.

Hi,
several people have commented that this link has helped with VOIP setup for WAG54GP2. You will have to substitute in the appropriate information for you VOIP service provider.
http://forums.whirlpool.net.au/forum-replies.cfm?t=550952
note also the discussion on this unit at http://forums.whirlpool.net.au/forum-replies.cfm?t=512264&p=1

VOIP setup for the lab

Next year we are planning a VOIP migration for some of our in house users. We dont have any WAN connections and bandwidth between floors are gigabit.
What I am looking to do is buy a small setup for our lab this year so I can begin to learn about VOIP etc. So far I have researched and this is what I am considering buying.
- Cisco 2801-V/K9
- VIC2-2FX0 voice interface card
- 3560 24 port 10/100 POE standard image
- 5 7940G ip phones.
Is this a decent setup for the lab ?
Would it allow me to configure a basic voip setup and learn the fundamentals of configuring VOIP ?
Any help would be appreciated.
Cheers
Dave

Hi Dave,
You can probably get away with this for even less.
You could probably get something like a 1751-V with PVDM-256k and VIC-2FXS with the IP phones. You may need the power bricks in this scenario.
Alternatively,
CISCO2621XM with NM-2V with VIC-2FXS and the phones/bricks
But yes, your current setup will work. You would need to add something like a PVDM2-8, PVDM2-16, or PVDM2-32 for DSP resources, with the number depending on whether or not you want to play with transcoding/conferencing.
hth,
nick

Site setup help...

Hi -
I am new to using CS5 and I am having a few different problems. I am not sure but I think they all stem from improper setup. I had used dreamweaver mx 2004 to set up a few sites back in 2004-5 so I am am somehwat familiar with setup, however, besides trying out CS5 on a new computer, I also now have a QNAP 459+ NAS which I am using as the remote server (as opposed to a site through go daddy or other).
I have PHP and mysql running on my NAS, and I have also installed Xampp on my computer. (first off I was not sure that I needed this because I have a server (NAS), but I decided to install so because I was pretty sure that my local machine needed apache running in order to parse php scripts before they run on the server) In XAMPP control panel, I get the following:
Where it says apache is started but up above it does not say that it is running. When I try to view PHP code in dreamweaver from the local site, it just shows the little PHP emblem and does not process the code. It does process php if I access the page from the server by typing the address in a browser. It does not process at all in dreamweaver.
I also get the following errors in dreamweaver which I am not sure but I think are related:
"dynamically-related files could not be resolved because your credentials don't allow file activity on the server"
and
"An unknown error occurredwhile discovering dynamically related files. Retry."
I am not sure if I have multiple problems or just one which is causing all these symptoms, but any advice/help would be greatly appreciated!
Thanks,
LilPauly8211

Lost prior settings? How? Why?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Vince Howard" <[email protected]> wrote in
message
news:f1s810$g7u$[email protected]..
>I can not connect and upload to the web site thru
Dreamweaver and need some
> setup help. I can not determine what I am doing wrong. I
have lost all my
> prior
> settings, new computer. Can someone help me with the
local and remote
> settings.
>

Setup & Help buttons stopped working

I recently upgraded wireless network from WEP to WPA. Lost wireless connectivity to 3310 All-in-One, and now Setup & Help buttons don't work so I can't connect to new network. What happened? Is there a way to setup new network without accessing Setup menu on device?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page. Run the software, making sure there is no USB cable attached. Choose "Network" or "Wireless" connection type when it asks. Plug in a USB cable (temporarily) when it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cs4 in design page setup help cm, mm, inches change

hi all
i dont know if i am being totally stupid but whaen i go to start up an new document in indesign cs4 i can sem to change my page dimension option to cm, inches or mm it comes up like - 51p0 x 66p0 etc
can someone tell me how to change this so i can make my pages in mm, cm or inches?
thank you for your help
here is a a screen shot

ahhhh
thank you
Date: Sat, 22 Aug 2009 06:37:29 -0600
From: [email protected]
To: [email protected]
Subject: cs4 in design page setup help cm, mm, inches change
With no files open, edit your preferences and change units to inches.
That said, InDesign will convert units so if you type 11 in, even though the document uses picas, it will convert the inches to picas for you.
Bob
>

Voip setup - need help

Hello,
I participate in a project in implementing voip in our office.
We have two routers and we just installed 2 dsp cards in the pvdm slots of our routers
I have attached our network setup and i was wondering if this will work
I have little experience in voip and cisco call manager (which will pe configured by someone else)
I am not sure how the ip phone can comunicate over the e1 lines to public pstn, i mean will this work?if not how can i make it work?

It can be possible.
Designing and Deploying VoIP over ISDN:
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00801006c6.shtml
Configuring ISDN Interfaces for Voice:
http://www.cisco.com/en/US/docs/ios/12_2/voice/configuration/guide/vvfisdn.html
E1 PRI Troubleshooting:
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800f9e3a.shtml

Advanced? Network Setup Help

Hi All,
I revisited my network problems (posted earlier) and everything is now working peachy.
My current setup:
cable modem -> airport extreme -> wireless computers
(wan) | ---> linksys router ---> VOIP
|--> Buffalo Linkstation
|--> wired computer
Ok. If I plugin to the linksys router I can see the Buffalo Linkstation (which is a shared NAS drive).
I can't however see the Buffalo via wireless. I am positive this is due to my configuration of the network - I DHCP (10.1.X.X) w/ the Airport Extreme and DHCP (192.168.X.X) with the Linksys. While technical, I don't mess with network configuration very often.
My question - what can I do to set it up so that the wireless computers can see computers / NAS drives on a plugged in router? The configuration is changeable btw (ie cable modem -> linksys -> airport extreme) if necessary.
Thanks for the help in advance!
David

gnash, Welcome to the discussion area!
Your problem is caused because you have 2 routers in your network. Therefore the wired computers are on a different subnet than the wireless computers.
One solution is to replace the Linksys router with a simple Ethernet switch or hub.
Another solutions is to reconfigure the AEBS so that it does not distribute IP addresses and then connect your network like this:
modem->Linksys->[LAN] AEBS
In this configuration, the Linksys will provide IP addresses to both the wired and wireless clients.

Cisco 2960S FPS-L PoE switch with Avaya 9811g VOIP setup

Hello,
I am connecting a setup for data/voice connecting Catalyst 2960S-FPS-L PoE switch with Avaya 9811g series VOIP phone. As per my knowledge cisco switch works well with Cisco phone as it has got some builtin "Macros" and Intelligent PoE recognition when we connect device getting the details of another device through CDP. I understand I have to create data and voice vlan with QOS then enable trunking on the interface to other switch that is also 2960. Little confuse if is there any compatibility issues with Switch and Avaya phone regarding protocol/data/voice...?
Do I have to do PoE config for each port on the each interface?
any help or detail config will help.
Thanks in advance.

Hi I am back after good research. created two vlan data and voice with trunk on interface1/0/48 given below config..
connection b/w 2960s FPS Switch and Avaya 9611g IP Phone.
lldp/cdp is enable on switch
So I created this config if some one can take a look .
expert advise if something wrong?..
I am only concern with Voice and PoE as voice is my priority. do i have to map something for voice quality?
also if i create another Trunk port one allow voice other allow data both cable will go to switch will that be issue?
interface....
switchport access vlan x
switchport mode access
switchport nonegotiate
switchport voice vlan xx
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust cos
auto qos voip trust
spanning-tree portfast
interface ........
switchport trunk allowed vlan x,x
switchport mode trunk
switchport nonegotiate
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust cos
auto qos voip trust

VoIP test help

I have been given the task to test and implement VoIP on our exixting network. We have two remote offices and currently they are connected using point-to pint lease line,with the bandwidth of 128K and the other 64K.
We have a PBX at our main HQ (where Im currently based) and according to the installer, the PBX has capability of VoIP.
Im planning to upgrade the lease lines to our remote office to 2Mb each.
At our HQ, we have a 3661 with only one slot empty. We want to do a test for the time being where the PBX at our HQ act as the main PBX for our two remote office.
We want the setup to be something like this:
phone(extension 200) <---->HQ PBX <------>HQ Router<------------------------>Office branch Router <--->phone(extension 300)
2Mbps Data circuit
We are currently using encapsulation PPP on our serial links and static routing. Im currently using 1751's at the remote sites
I need advice on the following:
1. Router cards needed
2. IOS of the routers capable of VoIP
3. cables needed
4. Sample configuration
5. etc
Need your help
regards

Hi,
If I understand:
As you know in VoIP if you use G.729 codec (which make sense for WAN) the bandwidth for each voice channel is 24 Kbps. If you do RTP compression you need only 13 Kbps (more less - for lines of 128 Kbps, do not use for 2 Mbps) for each voice channel. So I think you are upgrading the leases line only for data purpose, and not voice. As you can see if you have E&M at PABX and you can go to 4 E&M at 3661 then for voice you need +/- 52Kbps for each branch...
At branch you do not have a PABX, so you need to have at 1751 FXS, to connect analog phones and FAXs, you need one slot for WAN e two can be for voice. So you can have at each branch 4 or 8 FXS (for example 3 or 7 phones and 1 FAXs - without local PSTN connection!) - 2x VIC-2FXS or 2x VIC-4FXS.
If you need a local connection to PSTN at the then you can use one voice slot with 4 FXS (VIC-4FXS) and one slot for PSTN interface, which depends of what you have or what you pretende to have - it could be analog interface (FXO or E&M) or digital interface (ISDN BRI or PRI).
Regards
LFR

10.5.1 Server Setup - Help Make it all Work!

Hello Everyone, I currently have a new MacMini running 10.5.1 with our Calendar, Wiki and File Sharing. I have recently just returned from the Mac OS 10.5 Training Session from Chicago Columbia College and was astonished at what their demo servers did versus what mine has never done lol. We are a small tech company and there isn't much yet in the way of documentation or training or even training materials for Leopard Server. So I wanted to share some of what we learned from the training seminar and hopefully someone will know the proper answers to my questions. This is going to be a bit long winded but I think it's important to convey my questions/concerns.
1. Ok initial setup of our Leopard server requires you to input a host name and then the domain name. Well after the first install of Leopard we found as I have read amongst the posts for the past 2 hours that if you place let's say macmini in the host-name field then place domain.com in the domain field. After the server setup is complete Leopard Server wants you to chat, vpn, and browse to http://macmini.domain.com/groups as well as mail. This is all well and good if you have access to DNS like I do and can easily make changes to the MX & A records but if your a typical SMB user then you won't and this means that once your e-mail is setup and your ready to start using your server anyone you e-mail will come from [email protected] and not [email protected] which is a huge problem. So be cautious here. I was instructed by Apple after scratching their head to leave the host-name blank and only fill in the domain name here if your on let's say a T1 or other medium with a static IP pointed at your machine or router. So this is my first pet peve, there is a sloppy work around to this by telling the server to receive e-mail for domain.com as well but still whenever you send it comes from the original domain.
2. Application Setup - Single Sign-on - When I attended Leopard training this week in Chicago I was amazed at how whenever a user (demo -lab environment) logged into ichat, ical, wiki or e-mail there was simple single sign-on kerberos auth. What I mean by this is once the server is up and running and your Mac connects to the network for the first time either by manual add thru the directory application or a new Mac that finds the Leopard server automatically at first boot and you auth a user on the server to that Mac then there is just a single signon from that point on, NOT! For us our users log into their machines, (mind u they are already users on the Leopard server and can log in just fine) and they try to go to their e-mail for the first time it always fails. We then have to disable SSL over SMTP and IMAP and manually type in their passwords because the MacMail clients cannot trust the SSL cert or we simply just delete their accounts and recreate them from scratch. Same happens with iChat. By design when you auth your Mac against the server, the server auto configs the security and client apps, i.e. mail, ichat, directory, VPN, ical. But iCal has consistently failed setup across 5 server builds and 10 clients. What will happen is when you go to prefs in ichat you see your account but it can't auth you and doesn't show up in ical for your personal server calendar. If you manually remove your user account and re-add it works great. But next time you go to ichat, once again you have to recreate. And I can recreate this all day long. But at the demo it worked like magic. So that is problem number two, SSL and single sign-on does not really work and app auto-config does not work at all.
3. Apple Airport Extreme 802.11N. - As a test and per Apple's recommendation for SMB clients we picked up a new Airport. We patched it and setup user/pass info and setup DHCP on the device for so if server fails we have internet. And during server setup it logged into Airport and tried to configure settings. We were on the net and all was good after server setup. However with VPN enabled per user in Standard mode on server we have only been able to gain VPN access for clients if they are actually inside the network. I have spent about 10 hours back and forth with Apple Support trying to get VPN to work outside. The Manual setup of new Airport Port-Mapping is simple but crude. It does not seem to work. And there is a default hosts setting which should translate to an open DMZ but does not. So that is third on my list, running a MacMini with 2gig's of RAM which is within SPEC for Leopard Server and using the Apple Recommended solution of an Airport Extreme N does not work for s&*% and I would be very surprised if anyone here has gotten that to work.
4. E-Mail Services - As stated prior Leopards auto app setup utility does not work for crap unless by some magic there are other steps besides the ones outlined and printed with the purchase of server. But the main thing about mail is that we are missing the basics. I mean your going to be hard pressed to find ANY e-mail application on the market today, Notes, Exchange, Gmail, Hotmail, Yahoo, iMail or other that does not include basic vacation/out of the office message replies. This is a huge issue for any small business or for that matter any size business that wants to automate things when they are out and I think this is one of my small peeves but certainly worth a listing here.
5. VPN - We have tried like **** to get the VPN to work thru the Airport as previously noted but we have also connected MacPro with 2 nics, one for net and one for LAN and not been able to connect to the server from outside our network. Here is my largest frustration, we currently run SBS2003 from MSFT and they run flawlessly. I have literally sat with clients in their office during a new setup for SBS and in 3-4 hours we were up and running with minimal system level changes from the guided path. And for Apple to advertise this in the manual and all online materials as being SMB friendly is a complete slap in the face. Now don't confuse my above descriptions of problems we have seen across 5 Leopard builds as being a rant because it's not but seriously I am a network engineer with 10 years in the field working with 20+ product ranges and in our office we only use Mac because of stability and uptime. But OS X 10.5 is not Small Business Friendly at all even with the half hearted attempt at the new System Admin console for SMB users. However that being said I will still push on and try to get all these little bugs worked out and what I would really like to see is some feedback on my issues and I would love to know if anyone else has had similar issues. I really had hoped that 10.5 could help my firm finally push the proper solution (Mac OS X) for our SMB clients but it just isn't there yet.
Cheers,
DM

Thanks for the quick read and response. Do you feel the issue might lie with the fact that it is a Mac Mini? And possibly just not powerful enough to run Leopard Server? I have to say in our trials with MacPro it was like night and day as to how they performed. And if you could elaborate on this "Many VPNs don't play well with NAT so your VPN server should have a direct connection to the public network (preferably firewalled, of course, but not NATted)." Most every SoHo and for that matter uses simple NAT translation for security even our multi thousand dollar Cisco PIX and ASA's are basic NAT devices to start with. How would you put the VPN on public net while keeping the attack surface low for the rest of the services like file, web, mail and print?
Don't get me wrong I want this to work more than you can imagine. We are so tired of supporting MSFT technologies that cost thousands a year in antivirus, antispyware, antispam and other malware protection for the enterprise. We know that Leopard has great potential but for an integrator, getting this system up and functional is not an easy task. And the worst part of it is every time we have called for support the tech always lets out a sigh when they hear we have run standard setup because they are not allowed to walk us thru the server console to make repairs. And have been told by 3 techs so far that this is a new product and the support avenues are not there for standard since it just supposed to work out of the box. But when it doesn't then ohh well. Which is sorta sad...
DM

Family Sharing Setup Help

Hi all,
My wife and I have an old iCloud/iTunes account setup that we like but it doesn't want to play ball with Family Sharing. Consequently, I am hoping you guys can help us nut out the next steps.
Before Family Sharing, my wife and I wanted to share photos, contacts, calendar events, shared email and so forth but be able to make our own iTunes purchases separately.
Consequently, we set up an iCloud account and put this into both of our iPhones, laptops and iPads under Settings > iCloud.
We still, however, had iTunes Store, FaceTime, Messages etc set up on individual Apple ID's.
I attempted to set up Family Sharing using the shared iCloud account and setting my personal iTunes Apple ID as the "purchasing" authority and payment.
However, when I invited my wife in - it shows exactly as it is set up (probably due to the shared iCloud account details) and she doesn't see any purchases I have made and I don't see any purchases she has made.
What should we now do? Do we need to revert to using our own individual Apple ID's in "iCloud" or something?

Hello Carney10,
Thank you for visiting Apple Support Communities.
When you say you do not have the setup option for Family Sharing, that seems like you log into the iCloud System Preference but the "Set Up Family" button is not there.
Is your Mac updated to Yosemite?
Family Sharing - Apple Support
iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality.
Where in the setup are the options not available or working?
OS X Yosemite: Set up Family Sharing
Best regards,
Nubz

Audigy 2 ZS Platinum Pro - GigaWorks 7.1 - Tracktor DJ Studio - Setup help ple

I am trying to work out the best way to configure the following components so I can mix 2 tunes - listen to the mix on one channel and the incoming song on the headphones.
SoundBlaster Audigy 2 ZS Platinum Pro
GigaWorks 7.
Tracktor DJ Studio
Currently with the Gigaworks connected to the Audigy and the headphones connected into the External IO Hub - selecting any combination of channels in Traktor to become master or headphone yields all tunes being played through speakers and headphones.
Reading the spec on the Audigy it appears I can use Line out on the soundcard itself to connect the headphones direct - but with the Gigaworks requiring all 3 line outs - how should i then best connect the speakers?
The Traktor instructions indicate that this config is possible using a multichannel soundcard - which this is.
I've attempted config in Traktor using all of the following Audio Devices:-
SB Audigy 2 ZS ASIO [ECCO]
SB Audigy 2 ZS ASIO 24/96 [ECCO]
Creative ASIO
DS SB Audigy 2 ZS Audio [ ECCO]
No luck with any of them.
Im obviously not understanding something - and im sure im not the first person to attempt this.
Any help appreciated.
Regards
Simon

I think what you're missing is that the headphone out is really connected to the same signal as the front speakers out. The assumption is that you're either going to be listening to the headphones or to the speakers. Tracktor can probably use the soundcard channels independently, but anything directed to the headphones also goes to the front speaker output. I believe you can set things up so plugging in the headphones will mute the speakers, but that doesn't help the front speakers play a different signal than the headphones.
I don't think there's a connection setup which you can use both for Tractor and for 7. listening. You can probably get Tractor to send the output you want to hear on your headphones to line out 2 and the mixed signal to line out . That would mean connecting the headphones to what is normally the surround left/right output, which you'd need to disconnect from the speakers while you're doing this.
If you end up trying to rig up switching to help you go back and forth, using 4 Sony-type camcorder cables for line out 2 and 3, and 2 stereo minijack to RCA cables will probabably be helpful because it will be a lot easier to get RCA-connector switching than 4-pole minijack switching.
-Dave
[email protected]

Page Setup Help

Hello,
I have been working on a pamphlet for my university. Now the size of the page is 8.5 inch by 11 inch. I am designing two pages (front and back) with this page measurement. However, I am also required to print another version of the pamphlet with the page size being 17 inch by 11 inch (Pretty much just merging the front and back side in a top to bottom style in a longer page). I was wondering if there was an easy way to print it like that without having to modify or edit the designs. Any help would be greatly appreciated!
Thanks in advance.

Were I to do it:
If you do this on a document where the spreads are not together as I suggested...
1) Change the layout to portrait (File > Document Setup, change to portrait). This will cause the content to no longer fit the new orientation.
2) Next, rotate the spread 90 CW so that it is back to landscape mode when you view it on screen (View > Rotate Spread > 90 CW)
3) Then, rotate the content on the docuent so that it is laid out on the page as intended. This should be as easy as selecting it all and setting the object rotation to 0.
4) Repeat steps 2-3 for page 2
5) join the spreads as I suggested.
If you have already joined the spreads...
1) Do step 1 above
2) Do step 3 for both sides (although you may have to set the rotation to 90 degrees) and reposition on the page
3) do step 2 above.
Note the orientation of the page and the spread in the pages panel. Also note the rotation icon to the right of the spread in the pages panel. InDesign CS4 and later.
-mt

Express to extend network - setup help please

I would really appreciate some help ensuring i have the correct set up for my express (x2)
I have a mac, macbook, sky broadband modem and a basestation
I connect to the internet using the modem and network "sky 13222".
The basestation has a network id as well "af506f", but i dont use this to connect to the network.
The idea for the 2 expresses was to expand my range into a weak reception of the house for one; and to connect my new pannny bluray player with the other.
I have plugged the first one in and it has showed up on the airport utility f9567b, but when i go to configure it suggests switching networks, which i am unsure about the next steps...the guide doesn't help really..
Anyone with a recommended setup for this?
I am not sure the setup was right before the expresses but i could connect wirelessly to the macbook and my wii ok...
many thanks in advance

Hi, to set up the airport the computer has to connect to it hence "switching networks"
Once you added your new Airport to the your existing network then you should be able to switch back and it may all work!

VOIP Setup - help

Similar Messages

Maybe you are looking for