VoIP (SIP) configuration guide for Nokia 5800xm

hi.everybody i would like to ask how to configure this 
VoIP (SIP) configuration for my n5800, because when i saw and follow this link http://www.elisanet.fi/craig/sipvoip/nokia_n97.html ,i only configure my SIP setting and not my net setting which i tried to find in my phone. can someone  help me find this Net setting in my handset and can you put a link on how to call from phone to phone using this "VoIP" and is this free of charge. thank..more power

Hi, don't have an answer to your question, but Skype for S60.5 was announced today, works fine, will give Skype to Skype calls free, and low cost calls to non Skype numbers, but both Skype or Voip will incur data charges if you don;t have a data plan !
Good Luck
Skype.com/m with your phones browser will take you to Skype
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Linksys WRP400 - VoIP Sample configuration guide for VoiceMeUp

    Thanks to Linksys for that fine device. Few installations so far with this device and it has prooven his stability and reliability.
    Note: Good T38 support and excellent QoS.
    Here is a sample of configuration to VoiceMeUp
    Linksys WRP400 - Sample configuration guide
    [english]  -  [français]
    Enjoy!
    For more informations about VoiceMeUp VoIP services, please visit us at voicemeup.com
    Message Edited by NothinElse on 08-25-2008 01:09 PM

    Clearly this is too late to help you, but since this is showing up on Google and there are about a thousand views, this answer might be helpful to another.
    Once you access the Voice Admin menu and provision your device for your VoIP provider, access to the Voice menu is subsequently "Locked". 
    Your VoiP provider's system has set a new unique password for the Voice menu once the provisioned device has synced with your providers system.
    You should be able to get that password from the control panel on you VoIP account profile under "equipment" or a call to support or an e-mail request should garner the password.
    The Login will be "admin" and the password provided will get you back into Voice menu system.
    You will also need this password if you want to reset the Voice features back to factory defaults.  Because of this system it appears that a WRP400 cannot be unlocked by merely using the reset button. 

  • Need Post installation configuration guide for PI 7.0

    Hi,
    Does anybody have Post installation configuration guide for PI 7.0 ?
    Our basis team has installed PI 7.0.
    Now we need to do the post installation.
    Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
    Your help appreciated.
    Thanks,
    Vinod

    HI,
    See the below links
    Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
    -/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Regards
    Chilla

  • Configuration guide for ESS/MSS mySAP ERP 2005

    Hi
    Can you please send me configuration guide for ESS/MSS mySAP ERP 2005.
    Thanks in advance
    Regards
    Gauri

    http://service.sap.com/instguides
    --> SAP Business Suite Applications
    --> SAP ERP
    --> mySAP ERP 2005
    --> Upgrade
    --> Upgrade Documentation - mySAP ERP 2005 SR2
    There choose your database and operating system.
    If you're looking for functional details check
    http://service.sap.com/releasenotes

  • Help on Business Scenario Configuration Guide for SRM Server 5.5

    hai friends
    where can i get Business Scenario Configuration Guide.for Version SRM server 5.5
    i found for 4.0 and 5.0 but not for 5.5 Please let me know the link of market place
    thanks
    Regards
    Krishna

    Hi Krishna,
    You can find all configuration guides at http://service.sap.com/ibc. For SRM server 5.5 (SRM5.0), the configuration guide has to be downloaded from Solution Manager.
    Solution Manager is must for all new version implementations now.
    Regards,
    Prashant
    Do reward points for helpful answers

  • Looking for Business Scenario Configuration Guide for ECO CRM

    hi,
    I have the SAP E-Commerce for mySAP ERP: Business Scenario Configuration Guide (for ECO). I am looking for the same document for ECO CRM. Does anyone know where I can find this document?
    kind regards
    Michael

    Hi
    Check the following Configuration guides
    C14: CRM E-Commerce available on
    http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    Hope this helps
    Regards
    Rekha Dadwal

  • Configuration guide for Action Control Matrix

    Hi, Does anyone configuration guide for action control and status matrix for VMS for Equipment master, General Object creation, Master warranty creation and assignement for the object VELO.

    I have seen this as well as the SAP best practices configuration guide, they do not talk about the status for CREQ. We have defined it as secondary action and executed the action but it does not create the equiment. The CS/Plant maintenance does not seem to recognise objects created from VELO. Although the documentation talks of  VELO as equipment categry along with the standard equipement category EQ, we are not sure if we have to add VELO as equipment category (add how to add as well) so that the vehicle master details can be carried from VELO into equipment for warranty processing.
    Thanks

  • Configuration guides for Healthcare / Pharma industries.

    Hi,
    Where can I find configuration guides for SAP CRM for Healthcare / Pharma industries?
    Thanks,
    Satya.

    Hi Kristoff,
    Thanks for that.  But, I am not able to find it.
    Could you guide me step by step approach of that note.
    Thanks,
    Satya.

  • Configuration guide for Personnel Administration Required

    Can anyone send me the Configuration guide for Personnel Administration....Thanks in advance

    you can go through this link for the configuration of PA.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm
    this should be helpful for you
    if you need still more pdf documents send me your personnel email id, i can send it to you.
    sam

  • Configuration Guide for Time Management

    Can anyone send me the configuration guide for Time Management

    The following is the config. document of TM. check the threads u will get some more good responses and close the thread if u find the response is good enough
    I think its helpful to u.
    IMG  Personnel Time Management  Work Schedules  Define Public Holiday Classes
    IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for the Work Schedule
    IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for theDaily Work Schedule
    IMG  Personnel Time Management  Work Schedules  Daily Work Schedules  Define Daily Work Schedules
    IMG  Personnel Time Management  Work Schedules  Period Work Schedules  Define Period Work Schedules.
    IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
    IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
    IMG  Personnel Time Management  Work Schedules  Day Types  Define Special Days.
    IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Employee Subgroup Groupings
    IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Groupings for the Public Holiday Calendar.
    IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Set Work Schedule Rules and Work Schedules.
    IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Generate Work Schedules Manually
    IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for the Work Schedule.
    IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for Time Management Status.
    IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Define Personnel Subareas for Substitution Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Set Defaults for Substitution Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Group Personnel Subareas for Attendances and Absences.
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Define Absence Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Define Counting Classes for the Period Work Schedule.
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Employee Subgroups for Time Quotas.
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Personnel Subareas for Time Quotas
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Rules for Rounding Counted Absences
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules  Deduction rules for Absence quotas
    IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Assign Counting Rules to Absence Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Define Attendance Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Attendance counting  Rules for Attendance counting (New)  Assign Counting Rules to Attendance Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Time Quota Types  Define Absence Quota Types.
    IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Automatic Accrual of Absence Quotas  Permit Quota Generation Without Time Evaluation.
    IMG  Personnel Time Management  Time Evaluation  Time Evaluation Settings  Set Personnel Subarea Groupings for Time Recording.
    IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Base Entitlement for Absence Quota Generation.
    IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Determine Validity and Deduction Periods.
    IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Define Generation Rules for Quota Selection.
    Edited by: Sikindar on Feb 11, 2008 6:05 PM

  • Configuration guide for ASA Ipsec.

    Ho guys.
    I need configuration guide for ASA Ipsec using Cli.
    Thank you.
    Sent from Cisco Technical Support iPad App

    Hi,
    please check the below link
    http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b4ae61.shtml?referring_site=smartnavRD
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
    Thanks and Regards,
            ROHAN 

  • Configuration Guide for cProjects Version 4.0

    Hi All,
    Does anyone of you have the Configuration Guide for cProjects Version 4.0. Would appreciate if anyone could mail me, my mail id is [email protected]
    Thanks & Regards,
    Stephen

    Hi,
    for cProjects 4.5 information on the configration guide can be found in note 1119326.
    in general use http://service.sap.com/instguides and navigate to
    "SAP Business Suite Applications" > "SAP PLM"
    and there you can find the guides for all delivered cProjects releases.
    I hope this provides the pointer needed for all the other participants as well.
    Best regards,
    Thomas

  • Configuration guide for drop shipments

    Hello all,
    Pl. post any link/documents/Configuration guide for configuring the drop shipment process in SAP.
    Thanks,
    Maxx

    Maxx,
    I assume when you say "Drop shipments", you are referring to the process where a customer orders product from your company; you procure the product from a Vendor, the Vendor ships the product directly to the Customer; and you invoice the customer. SAP calls this Third party order processing.  SAP has two Best Practices, Here are the Business Process docs, and configuration guides.
    Third party order processing w/Ship notification
    http://help.sap.com/bp_bl604/BBLibrary/Documentation/107_BPP_EN_US.doc
    http://help.sap.com/bp_bl604/BBLibrary/Documentation/107_BB_ConfigGuide_EN_US.doc
    Third party order processing without Ship notification
    http://help.sap.com/bp_bl604/BBLibrary/Documentation/114_BPP_EN_US.doc
    http://help.sap.com/bp_bl604/BBLibrary/Documentation/114_BB_ConfigGuide_EN_US.doc
    Rgds,
    DB49

  • Configuration guide for cFolders 4.5

    Hi,
    I couldnt find the latest configuration guide for cFolders.. I checked in service place, but couldnt find for 4.5
    Can someone send me the link where I can find configuration guide of cFolders 4.5
    Thanks in advance
    Aby

    Hi,
    Please check below note,this may help  you
    1289589 cFolders 4.0 and 4.5 released for installation on NW 7.01
    SAP Note 1088160 - cProjects 4.5 - FAQ note
    1119326 Configuration guide for cProjects 4.50
    Regards
    Ravindra

  • Configuration Guide for HCM BENEFITS

    Hi,
    Could anybody point me to Configuration guide for HCM Benefits for SAP BI or BW ? whats the documents title/number containing necessary HCM Benefit analysis configuration ?
    Thanks in advance

    Hi Raj,
    Try this link:
    http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc
    Cheers,
    Tanish

Maybe you are looking for

  • How to find out which URL Category (many) URLs belong to - via script

    Hi, It's about AsyncOS7.5 on WSA S360. After implementing URL Filtering I have following problem: If I'd like to access amazon.de for example, there are plenty of other Web Pages  referenced too. Some of them belong to allowed URL Categories and othe

  • Mavericks / safari bad FONT SMOOTHING

    Hi, The option to disable font smoothing in OSX for small characters size (< 9 )  is not listed anymore in the General preferences panel of mavericks. Safari 7 with smoothing on small fonts is very hard to read on external monitors. Is there a hidden

  • How do I import full tape as ONE clip

    and not a million clips. You could do this in iMovie 06

  • Change roll-over color of combobox?

    Hey everyone. I have a simple question. What is the property of the combo box component that can change the RGB value of the roll over of a combo box to change it from the defalt green?

  • Preserving font change in a string subset

    I have a program where a string subset of a string control can be different font color. If I manually type into this string control the font color is preserved. However, if I programmatically insert text at the bottom of the string control using conc