Voip use ivr to reply instead of busy tone

All
The T1 ISDN got 300 number on a IDAP, and some of the number does not use.
The current network is Cisco 2600 T1 gw + 3600 gk.
The voip network had been formed.
Now if the number not need in use, it just simply give out a busy tone...
but is it possible for me to play an audio "this number is not yet register with our company...."
how can I do it? any document refer to this.
got a basic knowledge on tftp audio file...

Yes, it is possible. You can create a IVR application to let the user know that a number does not exist or it is not yet registered to the company. Check the configuration for the same in the following document :
VoIP with IVR
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a0080094305.shtml

Similar Messages

Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

Hi All,
Please help me.
I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
The test E-mail AutoConfiguration failed with this error:
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12175; httpStatus=0.
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12007; httpStatus=0.
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Local autodiscover for mydomain.com starting
Local autodiscover for mydomain.com Failed (0x8004010F)
Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
Srv Record lookup for mydomain.com starting
Srv Record lookup for mydomain.com Failed (0x8004010F)
Any idea?
Thanks,
Pieter

OK.
Please follow this step.
1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
2. Check legacy owa redirect that you already configure
3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
You error look like client cannot get autodiscover process please check it again.

Using Primay cost element instead of secondary cost element for expenses tr

Hai SAP Guru
WE are developer company, so when a land is acquired we create the project under business development with nomenclature "BD/LG/01" with corporate profit centre linked to it (as we are not sure if the project takes of due to various issues.)
When the project commences we create another project structure with nomenclature "BE/LG/01u201D with new profit centre.
So when we transfer the cost lying in u201C BD u201D project to u201C BE u201C project by giving settlement profile, the cost get transferred using secondary cost element. when we see the statement through CJI3 report the cost would have get transferred but when we
see the report through Finance Profit Centre report the cost would have not transferred.
So in order to get the report in profit centre, can we use primary cost element instead of secondary cost element, if we use the primary cost element what the consequence and what care needs to be taken for settlement.
Thanks.

Thanks.

Crystal Report with Universe instead of Business Views: Any limitations ?

Hi,
We were using Crystal Reports on top of Business Views until now. Due to considerable post-migration work with Crystal Reports on top of Business Views we are thinking of switching to Crystal Reports on top of Universe.
Can anybody explain me whether there is any drawback while using *Universe with Crystal Reports* instead of Business Views with Crystal Reports.
Please consider the following pointswhile giving an evaluation -
Dynamic parameter
(ii) LOV creation and maintainence
(iii) Maintaining order of parameters
(iv) Updating Universe/Business View level changes in Report (Verify database)
(v) Report performance
Your advice/views is appreciated.
Regards,
Neonevin

Here are my views..
Yes, you can create crystal reports on top of universes. But there is one major drawback using universe. You can connect to only one database at a time. But in Business View you can connect to multiple databases. If you are ok with this, you can absolutely go for universes.
Dynamic parameter --- Yes its possible
(ii) LOV creation and maintainence --- Whatever the LOVs you have in universe, you can use the same. And also you can use LOVs created in Business Views while creating reports on top of universes. Any how please check. not very sure about it.
(iii) Maintaining order of parameters --- Yes, the order of parameters can be managerd using universe designer itself.
(iv) Updating Universe/Business View level changes in Report (Verify database) -- No need of updates required to be done in report. There are few changes which can happen for universe. Seemlessly you don't need to do anything to reports. Unless you delete some objects in universe.
(v) Report performance -- Never checked in this perspective. Performance should be fine.
Regards
Gowtham

Using expdp and impdp instead of exp and imp

Hi All,
I am trying to use expdp and impdp instead of exp and imp.
I am facing few issues while using expdb. I have a Job which exports data from one DB server and then its imported so another DB server. Both DB servers are run on separate machines. Job runs on various clients machine and not on any of DB server.
For using expdp we have to create DIRECTORY and as I understand it has to be created on DB server. Problem here is Job can not access DB Server or files on DB server. Also dump file created is moved by Job to other machines based on requirement( Usually it goes to multiple DB server).
I need way to create dump files on server where job runs.
If I am not using expdp correctly please guide. I am new to expdp/impdp and imp/exp.
Regards,

Thanks for quick reply ..
Job executing expdb/impdp runs on Red Hat Enterprise Linux Server release 5.6 (Tikanga)
ORACLE server Release 11.2.0.2.0
Job can not access the ORACLE server as it does not have privileges (In fact there is no user / password to access ORACLE server machines). Creating dump on oracle server and moving is not an option for this JOB. It has to keep dump with itself.
Regards,

How do I use my new mac instead of old one with my iphone 4

I recently just got a new Mac and wont be able to use my old Mac because I will be leaving for college in a couple weeks. My iPhone 4 is set up with my old Mac. How do i get it to sync with my new Mac now instead of my old one? Because of space on my iPhone, I manually manage all of the music on it. When I have my iPhone connected to my new mac, it shows up in iTunes but it wont let me manage my music.

You can use Migration Assistant to migrate your old Home folder to your new computer. Or, if all you want is your iTunes Library, then copy the /Home/Music/iTunes/ folder to an external hard drive. Then move the external drive to the new computer and restore the folder to the /Home/Music/ folder on the new computer overwriting the one that's now there.
If you have never started up the new computer, then you can use the Setup Assistant instead of Migration Assistant to transfer your old Home folder to the new computer.
The two computers must be connected by Firewire cable or Thunderbolt cable depending upon what they both support. The old computer is booted into Target Disk Mode while the new computer is booted normally. In Setup or Migration Assistant you would be selecting the option to migrate from another Mac or disk drive.

I bought an iTunes gift card, reedemed it, and when i try to buy a game it doesn't let me use my credits, but instead I have to buy it using my Visa card?

I bought an iTunes gift card, reedemed it, and when i try to buy a game it doesn't let me use my credits, but instead I have to buy it using my Visa card?

What exactly do you see when trying to buy a game, what messages do you get on-screen ?
If it's an account that you've just created then unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
then credit card details will need to be entered before the account can be used to download any item from the store. You should be able to remove the card after entering its details.
If you are getting a prompt to review the account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054

Error BEA-000438 - Unable to load performance pack. Using Java I/O instead.

On a Solaris 9 machime, 64 bits architecture, j2sdk1.4.2_08, Weblogic Server 8.1 SP2
          when I try to deploy the application, launching java wiht "-d64" option I get :
          <Jun 22, 2005 12:12:41 PM CEST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead.
          Please ensure that libmuxer library is in
          :'/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9/server:/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9:/export/home/Aplics/Apl1/WEB-INF/lib::/usr/local/bea/weblogic81/server/lib/solaris:/usr/local/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib'
          libmuxer exist on /usr/local/bea/weblogic81/server/lib/solaris
          Any idea?
          Thanks

          Can you post more details ?
          Sergi
          Jiffy <[email protected]> wrote:
          >error:
          > <2004-3-12 %u4E0B%u534815%u65F648%u520654%u79D2 CST> <Error> <Socket>
          ><BEA-000438> <Unable to load performance pack. Using Java I/O instead.
          >Please ensure that wlntio.dll is in: 'D:D:/bea/weblogic81/server/bin'
          >>

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
I'm on a Macbook Pro and all of my software is up-to-date.
The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

Can i use an alternate email instead of an apple ID for iMessage?

can I use an alternate email instead of an apple ID for iMessage?

iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

Please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

This is primarily a user-to-user support forum and not related to developers. The following link has information about checking your program enrollment: https://developer.apple.com/support/ios/enrollment.html#howcanicheckstatus
If that doesn't help, there is a "Contact Us" button at the bottom of the page in the above link.

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

I can't search for books or authors on my iphone 6. It says no results found every time. Is there some setting I may have wrong? I have been using my kindle app instead.

I can't search for book or authors in ibooks. When I search an author or book and click on it a message that says not results found comes up. Even if I try to look up something popular like Dracula or Twilight. Is there some setting I should have clicked? It won't find or download any books at all anymore. This started about a month ago. I have been using my Kindle app instead.

Hi laurieg23,
I see that you are having issues with your connection to the iBooks Store. Here is an article with some troubleshooting steps that will be relevant to your issue, even though the article was written for issues with the iTunes Store:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store - Apple Support
https://support.apple.com/en-is/HT201400
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

[svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

Revision: 17772
Revision: 17772
Author:   [email protected]
Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
Log Message:
Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

Revision: 17772
Revision: 17772
Author:   [email protected]
Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
Log Message:
Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

Voip use ivr to reply instead of busy tone

Similar Messages

Maybe you are looking for