Voivemail access via web

other services ( comcast) provides a way to review voicemail via web. How's verizon doing on this?

you have go to the verizon website and choose my verizon. sign up for the free call assistant. downlosd the software and they will let you by email when its ready.

Similar Messages

Access via web CCM 5.0

Hi
I have been installed the CM 5.0, after the installation the i try to access via web from other PC with network connectivity ( the ping is OK) but i can not access. I use http://IPCCM:8080/ccmadmin
Is necesary to configure anything in the server before i can access via web??
thank you

doesn't CCM 5.0 use HTTPS (secure http) ?
try this:
https://:{8443}/ccmadmin/showHome.do
see this link for more info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00806331e7.html

WRT160n cannot access via web browser

After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.

Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router.

Is Guest Access via web auth available on Standalone 1130AP?

Hi,
I have seen that using LWAPP and a WLC, Guest WLans can be authenticated via a web page.
Is this possible on an Autonomous 1130 AP ?
Or is that only a functionality of the Controller ?
Thanks

As the other user said, this web authorization isn't native to the access point. It is a web authorization portal that is on the WLC.
With that said, any web authorization portal on your network could be used. I'm not sure what your budget is, but if you are looking to do this on a handful of devices, you might go with something like NoCat (nocat.net). I haven't actually used it but I think it is just an entry level (free?) portal.
I'm sure there are many of product out there, and cisco probably has thier fair share...
Note: in this case, it would most likely be used to authorize anyone to get connected to the LAN (or Internet), it probably wouldn't be used to authorize the actual Wireless Connection, just authorize the ability to get off the VLAN (like to the Internet)

Host name (localhost) when accessing via web

I installed Beehive and it is running great.
But I may have missed something - when I access the clients using http://<my web dns name>:4443/zimbra I keep getting re-directed to http://localhost.localdoamin:4443/zimbra.
When I downloaded the conferencing add-on it also tries to connect to localhost.localdomain and not to the host name of the server or the DNS name (not the same as the actual hostname).
The Outlook extension works fine and Beekeeper accepts and stays on the web-host name.
Can I get Beehive to begin using the web-host name in place of localhost.localdomain ?

I guess your machine name is incorrecly configured in /etc/hosts or your localhost line does also contain the machine name, which is often the case in linux distros "bare from install".
http://download.oracle.com/docs/cd/E14897_01/bh.100/e14830/what_you_need_to_know.htm#BHLIN754
I believe that it should be corrected with
beectl list_properties --component VIRTUALSERVERthen
beectl modify_property --component VIRTUALSERVER name ServerName value myserver.mydomain.comfinally
beectl activate_configuration
beectl modify_local_configuration_filesnot 100% sure

Can we open an excel attachment via web frontend of SRM

Hi friends,
I am sending an excel attachment using the function module 'SO_NEW_DOCUMENT_ATT_SEND_API1'.I am able to open that in SAP Inbox(SBWP).I want to know whether we can view that attachment when if it is accessed via web frontend of SRM(It will be accessed via internet service BBPBWSP_SIMPLE, and not as much via transaction SBWP in SAPGui), but the details of the attachment need to be visible from both places.
Regards,

Most probably You can access this from SRM Portal.
It would be good if you could post this in SRM Forum they would have given the answer by now.
<i>Here is a shocker, how about try it yourself to see if it works. I think trying it yourself would have taken a lot less time than posting the question and waiting for an answer.</i>
Please be a little liberal while replying to any question. He may not be proficient in this subject. This is also one of the Forum guideline to respect each other: <b>Martin</b>
Thanks
Arghadip

Web-UI error message "Access via 'NULL' object reference not possible"

I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.

Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun

I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in

I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?

You're saying that when you click on the iCloud preference pane button it sends you to the defunct MMe
rather than giving you this?
Is your profile up to date, i.e. are your running 10.7.5? Make sure you click on the iCloud button and not the MMe button.
OT

Getting error "Access via null" when running the web dynpro application

Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
    gi_manufacturer = ls_manufacturer
IMPORTING
    lv_message      = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
Vinod

Hi,
if   wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.

Web Dynpro application accessed via internet?

Hallo
We should develop one Application, but it should be accessed via internet. Our Personal System and Material System ist from SAP. Thus we want to did the GUI in Web Dynpro for Java.
I'm not sure if the WD runs on internet? And ist it ture that SAP only good for the intranet application? Have you any example to solve the problem such as authentication and autorisation for the service (using adaptive Web Service)?
Thanks a lot and
Nice regards
ping

WD Java Apps can be accessed outside Intranet for example companies expose their ESS/MSS applications(WD Java apps) on the internet for their employees and managers. However you need to check for browser compatitbilty depending on the Portal SP level you are using. WD Java many not be supported by all browsers and versions.
Hope this helps
Siva

Portal 7.3 & Web Dynpro iView, both accessed from Internet via Web Dispatch

Hi guru,
I'd like to know the best (or the correct) way to configure the FQDN and required DNS setting to allow user access ABAP Web Dynpro iview from internet.
My setup here is very typical:
One EP 7.3 in intranet, having "ep.internal.mycomp.com" as FQDN (given during installation)
One SAP ECC in intranet, having "erp.internal.mycomp.com" as SAPLOCALHOSTFULL parameter
One Web Dispatcher in DMZ, having "service.mycomp.com", and listen to 80 port (later added 8000 port for AS ABAP).
   User access my portal by using http://service.mycomp.com/irj, no problem.
But problem raised during access WD4A iview, here are my problem and questions:
[Problem]
At the beginning, we found that the WD4A iView can only be accessed in intranet, not from internet. Eventhough we register "service.mycomp.com" in public DNS. After some http level analysis, I was shock that the WD4A iview is provided directly by AS ABAP which running this WD4A, EP does not play a "relay" role. (Don't believe the URL bar in your IE, use Tamper Data or HTTP live to check the HTTP requests, you will get it). Since we DO NOT have "erp.internal.mycomp.com" in public DNS, so the iview cannot be displayed. But I DON'T want direct access to my ERP box.
I don't know a way to get rid of the "erp.mycomp.com" request generated by EP. So I tried to overcome the problem by leveraging the same Web Dispatcher used by EP. And I did make the WDisp -> ERP WD4A work using WDisp's FQDN (ie. service.mycomp.com:8000, also keep original service.mycomp.com:80 to EP), but the iview in EP does not use this FQDN. It use the SAPLOCALHOSTFULL parameter configured in backend ERP. WDisp does not do any URL replacement for me.
[Question 1]
Is there any way to hide WD4A iview in EP (server to server communication only)?
[Question 2]
If I can only have "service.mycomp.com" entry in my public DNS, should I change the SAPLOCALHOSTFULL in ERP to "service.mycomp.com"? I doubt that it may cause a "loop" situation between WDisp and ERP ?
[Question 3]
Is it possible to access WD4A on ERP by two different FQDNs (one for public via WDisp, the other for internal access w/o WDisp) ? I know there is only one SAPLOCALHOSTFULL configuration.
Anyone have done such integration ? please share your configuraiton. Thanks

Hay Wei-Shang Ku,
Many thanks to your prompt reply of this very old post I tried to ask!
for the /sap/* redirect, think it required to use icm/HTTP/redirect_<xx> parametet in WDISP profile. And i did applied below too to make default WDISP URL go to /irj (Portal login page).
icm/HTTP/redirect_0 = PREFIX=/,TO=/irj
so for "all request to /sap/* will go to ERP":
icm/HTTP/redirect_0 = PREFIX=/sap/*,TO=/??? (how do you set the TO value here?)
May i have your WDISP profile setting for reference? Did you make use of parameter wdisp/system_0?
And here is my overall setting:
we only have "service.mycomp.com" entry in public DNS.
1. "service.mycomp.com" is WDISP URL mapped to 1 public IP (we used default http 80 port)
2. we want user can access JPortal & also backend ERP via WebDynpro iView in JPortal via
   service.mycomp.com (only port only)
3. ERP system profile:
    SAPLOCALHOSTFULL = <ERPHOSTNAME>.mycomp.com (not in public DNS)
    icm/server_port_0 = PROT=HTTP,PORT=80$$,TIMEOUT=3600,PROCTIMEOUT=3600
4. Portal:
    ABAP WebDynpro iView setting -
   System = XXX (where XXX is alias of system iView)
System iView setting -
    Logical System Name = ERPCLNTXXX
    ITS host = <ERPHOSTNAME>.mycomp.com:8000
Thanks again your information, have headache of this issue for long times....
Gary

TS3276 Accessing Gmail suddenly stopped working on both my Powerbook pro running latest OS and Mail versions and on my iPhone. I can access via the web. I get the error that my password or username is incorrect. I reset my password in Gmail and confirmed

Accessing Gmail suddenly stopped working on both my Powerbook pro running latest OS and Mail versions and on my iPhone. I can access via the web. I get the error that my password or username is incorrect. I reset my password in Gmail and confirmed it works on gmail, I then changed it on my Iphone and Mac Mail. It still does not work. I deleted the gamil account on mail on my mac and reinstalled it and it still will not work

I too started having my password rejected in MAIL.app for imap.mail.me.com for my icloud email address. Can login to icloud with web browser fine. This has been happening off and on for several days.....if I wait 2-3 hours it will suddenly start working again, but then problem re-asserts itself ;-)

Accessing Hotmail via web browser on 5800

I've got a 5800 and a Hotmail account that I access via the web. Worked fine on my N73.
With the 5800 I get the "entering a secure page" warning, but then the phone stops with the warning "Unable to establish a secure connection." It does the same thing on Yahoo!
Any ideas?
Help appreciated.

I've got the same problem, I'll update if I find a solution.
T

Accessing printer via web site

How do I access the printer via web site?I tried entering the 127.0.0.1 but IE couldn't open the page.What am I missing?

The 127.0.0.1 address is the loopback address for your (and everyone's) computer. You will want find the IP address of the printer. You can do this from the front panel of the computer, if the printer is wireless touch the wireless icon on the bottom of the LCD. Once you have the IP Address of the printer put that in your browser.

NW Business Client and accessing SAP services via web pages

Hi all,
We currently use Business Connector to access our SAP environment via web pages. We looked at NW eSOA but decided against implementing it. Does Business Client offer anything that helps access SAP apps and data from a custom web site better the Business Connector?
Thanks in advance,
Tom

Tom
I am assuming you are using SAP Business Connector in your landscape to connect to back end SAP systems from your web applications. Your question now is that if business client can let you access SAP data for your web pages instead of the business connector. Point to not here is that Business client, as the name implies, is just a client with single point of access for SAP screens. That means, you can access traditional SAP transactions, WebDynpro screens, BSP pages, Portal screens etc in one single client. In very raw terms, Business client acts (or replaces) as your browser. It is not going to provide you any out of the box integration with backend system rather just act as a window. You options at this point are
1) Use your existing webpages but instead of getting data from the backend system through business connector, get the data using webservices.
2) Use PI as middleware tool and get the data from backend SAP system
3) Stay were you are but deal with high cost of ownership.
Thanks
KK

Voivemail access via web

Similar Messages

Maybe you are looking for