Vold Manager never detects the cd rom and any other removable media

Hi,
I have installed solaris 10(i86pc i386 i86pc) on my PC through Oracle Virtual box but I am stucked in a problem that the vold manager never detects the cd rom and any other removable media devices. I have tried many documented methods but could not get solution to this problem. I also stopped the volume manager (vold) and tried to mount the cd rom manually but still could not mount the cd rom.
I don't know how to configure solaris in such a way that it could detect cd rom and any other removable media.
Any help in this regard will be highly appreciated.
Regards,
Anees

Is it an IDE or SCSI CD-ROM? Can you post back the output of the following command?
ls -l /dev/dsk/c*

Similar Messages

  • The sequence jump and any other good solution

    Hi everyone,
    One existing system apply for sequence number as report number. But sometime the report number will jump. Before create each report, the system will get the sequence number. Then the sequence number will plus one automatially. but how come the sequence number will jump from 32 to 250 itc. Seems it is impossible that user failed to create few hundreds report in a quite short term.
    Any oralce bug caused the problem or good solution to replace current report number design?
    Thanks in advance,
    Hawk

    Some users do like gap free serial numbers. To them it seems like a no-brainer, an easy thing to do. This is just one of the ways in which a real-world metaphor fails in RDBMS, because people don't understand database architecture. More importantly people have forgotten (or, increasingly, are too young to remember) how difficult this sort of thing used to be.
    In the days before computers serial numbers ("sequences") were tracked by using ledger books or self-incrementing stampers. This was usually foolproof but: [list]
    [*]If someone made a mistake - stamped a docket in error or entered an invalid application form - then we had a gap, there was no way to re-use that number.
    [*]Only one person at a time could get the next number: only one person at a time can write in book. Which is fine if we just have a single accounts clerk, but a nightmare if we need to share those resources. If you lock the stamper in your drawer (for safekeeping) and go off to tea, I can't stamp any dockets until you come back.
    [list]
    So you can see that computers are actually quite like real life. The SEQUENCE object is geared up to be a shareable source of unique IDs. The trade-off for shareability is gaps. The only way to guarantee no gaps is the solution you have already, a code control table. But that introduces a bottleneck - you need to be careful to ensure that the table does not remained locked for a long period of time. What happens if someone starts to run a report and then goes off to tea? Will they prevent anybody else using the report? You could use AUTONOMOUS TRANSCATION to acheive that, but if the surrounding transaction is rolled back for any reason...you get a gap!
    Ultimately this comes down to how often the report is run. If you've got hundreds of users running each day then you have a serious potential for resource contention. If it's only one guy running it once a week then it does not matter.
    Cheers, APC

  • BIOS is not detecting the CD-ROM

    Hi All,
    I am need ur help on following issue.
    I have Toshiba Satellite M45-s265 laptop. the problem is BIOS is not detecting the CD-ROM. I
    replace the CD-ROM and it works under Windows but when i try to BOOT from CD-ROM, BIOS didnot detect CD-ROM. My boot sequence is right. its CD-ROM -> LAN -> HDD -> FDD
    My CD's are bootable for sure.
    is there any MASTER/SLAVE issue ?? or MOtherboard or BIOS ?
    pls help me out.
    thx.

    you're posting this all over the place aren't you??
    have you tried flashing the yamaha firmware? remember the link i gave you?
    have you tried a windows repair using the method i gave you?
    http://www.msi.com.tw/program/e_service/forum/index.php?threadid=31741&sid=
    i never liked yamaha dirt bikes...

  • Some way or another I've manage to lose the adobe cc and adobe "A" icons from the top of my mac's screen

    Some way or another I've manage to lose the adobe cc and adobe "A" icons from the top of my mac's screen how can I reload them?

    Hi Ed,
    Kindly check the below mentioned link to download the Creative Cloud apps.
    Creative Cloud Help | Download, install, update, or uninstall apps
    Thanks,
    Atul Saini

  • What do I do now that Install says, "Installer failed to initialize. Please download Adobe Support advisor to detect the problem." and your web site says it is discontinued?

    I am trying to install CS6.  I down loaded it last week and am trying to install it now but it fails.  What do I do now that Install says, "Installer failed to initialize. Please download Adobe Support advisor to detect the problem." and your web site says it is discontinued?

    This page might help you
    Creative Suite 6 Installation Instructions

  • Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    AMelie Eliabeth the Adobe Download Assistant can be dragged to your trash can.  There is no separate uninstaller or any other application files to remove.

  • Can someone pls. Tell me how long it would take to have the iPad up and running from removing the plastic on the box?

    Can someone pls. Tell me how long it would take to have the iPad up and running from removing the plastic on the box?

    Upon applying for Telstra contract, salesman filled out all details & I was approved immed.  He grabbed a new iPad 2 from the store's stock, all plastic wrapped, a white 32 gb.  He then asked me if I needed to go and do some shopping as he had mucked something up and had to redo application.  Everything had been completed and approved on screen, so I wasn't sure why he had asked me to come back in half an hour.  I did so, and upon arriving back he was standing at the desk, iPad in hand together with receipt and box, no evidence of shrink wrap.  As I already had bought a red cover, he basically grabbed that and slipped the iPad straight into it, without really asking me, and said, all ready to go.  Was a bit surprised but accepted that.  Did not see it being unwrapped, sim inserted or anything.  Thought it to be odd, and without any further advice, was handed bag, box and receipt.  Got home, thought it looked a bit fingerprinty, then wondered why it was basically set up ready to go.  He knew I was a gadget freak, owning 25 wifi related devices, but had never bought apple products so he said I'd have no problems.  There was virtually no set up to go through except for asking if I had an apple ID which I didn't so I created that and away I went.  I was looking through the settings a bit later and noticed the ITunes said to sync back with WILLS-MSI when it was available.  WILLS is the name of the store.  There was a 32 gb white iPad 2 as a display model and now I am seriously wondering if he has taken that off the shelf and given to me.  I have never in my life bought a display model and never would.  From my description do you think I may be right? ( even the silver back looked 'not quite new').
    OPINIONS appreciated, is there anyway of checking to see if a reset has been done as I am not at all happy & will be going straight to store manager on opening of store.

  • If Firefox is set as the default browser, and any application attempts to open a new window, this fails and I get the error "Firefox is already running..."

    Here is what I am running:
    Microsoft Windows 7, Service Pack 1, Fully updated to 4/10/2012
    Fresh Install of Firefox 11. No add-ons enabled as a result of troubleshooting.
    I am a user with administrator rights
    UAS is disabled.
    To begin, this has been going on Since Firefox 10 or so. A few months now.
    I am able to open Firefox. My add-ons worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, 4chan extension) had no problems. Firefox is set and has been set for the last two years as my default web browser.
    However Since approximately Firefox 10 or so, maybe before that, If I have a Firefox session open, and any other application attempts to open a session in a new window, I get the Firefox is already running, but not responding error."
    I attempted to follow troubleshooting advice already posted (look for parent.lock files left behind [none present], multiple sessionstore.js files [none present], create a new user profile, attempted to clear out the "read-only" permission in windows 7, however as soon as it is cleared, the read only permission returns.)
    As a last resort, I deleted the Firefox folder, the %APPDATA%/Mozilla directory in its entirety, then utilized CCleaner to remove any and all references to Firefox in the windows registry, then did a full re-install, no extensions installed right now.
    I checked preferences and have the option "open new windows in a new tab" checked off. The problem persists regardless if this option is checked on or off. This problem persists in or out of safe mode, even with the brand new install.
    Test Cases:
    All cases:
    Firefox is selected as the default browser for windows 7
    Case 1: Open a firefox session. Utilize any other program that attempts to open a link to their website in a new browser window or new browser session. Experience "Firefox is already running" error
    Case 2: Open a firefox session. Right click on Firefox on the task bar. Select "open in new window". Experience "Firefox is already running" error
    Case 3: Open a firefox session. Select the Firefox Menu > New tab > New Window. A new window will actually open.
    This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.

    Cor-el's suggestion resolved my problem. Apparently the MOZ_NO_REMOTE variable was set to 1 on my system variables. I never made it, and really have no idea how it got there, but deleting this variable and restarting firefox has resolved the issue. Thanks Cor-el!
    Marking case: Solved
    Solution: Verify the MOZ_NO_REMOTE variable is NOT set to 1. This can be achieved by simply deleting this variable.

  • Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Experiencing trouble syncing with the 10.3 version of iTunes on my Windows Vista machine. Have uninstalled all Apple software twice, reinstalled and continue to get an error 7 message in connection with the Photo Processor. Any other ideas to try?

    Hi,
    got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
    Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

  • ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • Second posting - spent hours on this - yesterday and today - I have downloaded the FlashPlayer upgrade (now 10 times), in Security - no pop-ups are checked, the "allow Java" and "allow other other plug-ins" are both checked.  I have re-booted after the Fl

    Repeat message - I have downloaded the FlashPlayer upgrade (now 10 times), in Security - no pop-ups are checked, the "allow Java" and "allow other other plug-ins" are both checked.  I have re-booted after the Flash-Player upgrades - still "pop=ups blocked"

    Hello,
    Please provide the following information:
    Your operating system & version
    Your web browser(s) & version
    Your Flash Player version
    Explain your problem in step-by-step detail if possible
    A direct link to a page that demonstrates the problem
    If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933
    Thank you.
    Maria

  • Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

    Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

    Hey jamesarm97 & diegofoto,
    On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
    iCloud: Troubleshooting web browser issues with iCloud.com
    http://support.apple.com/kb/TS4050
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Thanks,
    Matt M.

  • Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

    No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
    Allan

  • CKPT locks the system objects and blocks other sessions

    CKPT locks the system objects and blocks other sessions
    Oracle Version 10.2.0.4
    OS : HP UX 11.31 Itanium
    SQL> select * from v$lock where block=1;
    ADDR KADDR SID TY ID1 ID2 LMODE
    REQUEST CTIME BLOCK
    C0000009FCC2B348 C0000009FCC2B368 1100 RO 65559 1 2
    0 3877 1
    SQL> select program from v$session where sid=1100;
    PROGRAM
    oracle@ctqanhr1 (CKPT)
    As a workaround we flush the buffer cache with the below command
    SQL> alter system flush buffer_cache;
    however the issue reoccurs after some times.
    Edited by: 965132 on Dec 2, 2012 9:59 PM

    other reference:
    CKPT Questions
    The temporary workaround is to set "_db_fast_obj_truncate"=FALSE in that particular case.
    Regards,
    sgc
    Edited by: Samuel G. Cristobal on 03-dic-2012 8:48

  • Details:  i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

    Details:
    Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
    Note this is second email pls answer and fix my problem
    <Email Edited by Host>

    These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
    If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

Maybe you are looking for

  • CJ88 and CJ8G tcodes - Settlement issue

    Dear Experts, We are having an issue in the settlement process. We ran the actual mass settlement for all the projects for the specific RA keys. I do see the cost has been posted and transferred and they are settled as expected. Accounting looks good

  • Common segment postngs

    Dear all, I have a special question on the segment reporting. Currently we have so many segments and each company is busy in more than one segment. Which means every transactions should be tagged to the corresponding segments. For the unidentified tr

  • Workflow based on Account Manager

    Is it possible to create a workflow based on the Account Manager field? I currently have this is the code FieldValue('<Owner>') = "Joe Smith" I also tried [<Owner>] = "Joe Smith" Neither of them worked. Anyone have suggestions?

  • Can not create a file under \window\system32 folder

    How do I create a folder in \windows\system32 in x64 machine through java code? Creating a file/folder under \windows\system32 fails and java creates a folder in \windows\syswow64 folder. pls see the code attached for example. My client wants to crea

  • Wireless Gateway 1

    I received Wireless Gateway 1...with this device do I no longer need my Linsky router to connect my laptop (in another room) to the internet?