Vollume control pod for i-trigue 3400

volume control went bad. i suspect it is 50k pot w/switch. is anybody knows where to find one? i tryed local electronic stores including radioshek, no luck. creative refuses to help. please nelp. thanks, herman

Hi,
Have you tried eBay?
Link: http://popular.ebay.com/business-ind...ometer-50k.htm?
I am not sure about the exact component used since I am not tech support but you should be able to do a one to one comparison before making a purchase. I am assuming that the warranty have expired and you are planning to repair it on your own.

Similar Messages

Buy audio control pod for gigworks s750

' Hi my control pod it's damege but one question...i can buy another one? It's impossible impossible use the system without this control...please help i pay the speaker system 425. and now it's ready for the dirty http://forums.creative.com/i/smilies/6x6_smiley-sad.gif

Try in ebay.co.uk. I wound one system selling separatly
but owener is allredy sold control unit and center speaker.
I to need one speaker

I-Trigue 3400 static problem..

It's been only 4 months max since I've been using these speakers, and all of a sudden
starting yesterday, static sounds appeared.
I've tried plugging it out and waiting.. It was ok for a while.. but static returned.
It is NOT my computer, since when I use my head phones or another speaker, no static can be heard.
Also, if I turn the volume way- higher than my usual (almost to the max) the static disappears.
What is wrong with my speakers? It is in warrenty so there is no problem getting an exchange, but
I'd like to know if there's any way to fix it. If not, I'll get an exchange.

I got the crappy same Problem!
I plugged in my new Sennheiser HD590 (my 2nd Pair) into the Remote Control of the I-Trigue 3400. And i wondered of hearing these (static?) anoying tickling in the phones.
I thought it could may be my Sennheiser Headphones, but i wondered cause I got the I-Trigue 3400 since January and until yet it worked fine.
So I tried my old Sennheiser HD590 - same prob. I tried the Sennheiser MX500 (In-Ear-Phones) - same prob. I tried my Plantronics Audio .90 - same prob.
Then I plugged in the Headphones directly into my Audigy 2 ZS - no (static?) tickling sounds anymore. I tried and experimented until yet 3 days now - un-/installing drivers - unplugging etc. - nothing worked.
Please Support and tell me what is happening to my I-Trigue 3400 - I am using Creative Products for right over 8 Years now and i haven't got disappointed until yet. Go ahead!

I-trigue 3400 channel problem

Hello,
I've recently got a 2.1 i-trigue 3400 and audigy 2 ZX and i'm having trouble with them. The problem i'm having is that the channels don't seem to work. I can't pan between the left and right speakers, when i pan to the right channel, all i hear is the subwoofer and when i pan to the left channel all i hear is the left and right speakers playing at the same time. When i plug headphones into the wired remote, it works fine and i can pan between the left and right speakers on the headphones.
Surely this shouldn't be happening though? The fact that the speakers can't pan from left to right renders EAX in games useless (which is why i upgraded in the first place). My old 2.1 system didn't have this problem, can anyone offer any assistance? I hope this makes sense to someone and that i havn't worded it all wrong!
Thanks!

I got the crappy same Problem!
I plugged in my new Sennheiser HD590 (my 2nd Pair) into the Remote Control of the I-Trigue 3400. And i wondered of hearing these (static?) anoying tickling in the phones.
I thought it could may be my Sennheiser Headphones, but i wondered cause I got the I-Trigue 3400 since January and until yet it worked fine.
So I tried my old Sennheiser HD590 - same prob. I tried the Sennheiser MX500 (In-Ear-Phones) - same prob. I tried my Plantronics Audio .90 - same prob.
Then I plugged in the Headphones directly into my Audigy 2 ZS - no (static?) tickling sounds anymore. I tried and experimented until yet 3 days now - un-/installing drivers - unplugging etc. - nothing worked.
Please Support and tell me what is happening to my I-Trigue 3400 - I am using Creative Products for right over 8 Years now and i haven't got disappointed until yet. Go ahead!

I-Trigue 3400 Volume control Unit replacement

I need to order an I-Trigue 3400 "volume control unit". Where can I find one ?
Regards,
S.S.

As far as I know:
1) If you have speakers with still valid warranty, you can try to contact Creative Support and probably they'll send you a new remote control. You'll have to write them first, though, and send them the serial number of the speakers. Check the 'Support' section on this site.
2) If warranty has expired, nothing can be done. Creative will not send/sell you a new remote control, even if they have one in reserve. You can try ebay, or you can throw the speakers away...
I recently contacted Creative Support. I asked them if I can buy a new satellite and/or a new remote control for a quite expensive Creative Megaworks 250D 2.1 THX set. They refused, because speakers are out of warranty period, and they don't sell spare parts for speakers which are out of warranty... :-(
Message Edited by lefou on 05-05-2009 07:18 PM

Creative I-Trigue 3300 Control Pod Issue

On my I-Trigue 3300's, my control pod seems to be an issue as every once in a while, the volume with fluctuate without provocation. This has been happening for probably about 2 years now. They're solid speakers and I don't want to have to replace the whole set, and the issue isn't really a huge problem, but merely an annoyance and mainly occurs when I first turn on the speakers. I don't mind getting my hands dirty and digging into the pod if anyone has any suggestions. I know Creative doesn't sell the control pod itself, otherwise I would consider just buying one.

I have the same exact problem, but I can't return mine because I moved 3 hours away from the place I got it What did u end up doing to fix it, and is it something that I can fix? I really do not want to spend time sending them back to the company for the new set, that takes forever, not to mention the shipping cost >_> I had to do the same thing for my Eclipse 2 keyboard cuz of bad keys... please help me

I-Trigue 3400 for the Zen Micro. When?

Hey all,
Im just curious if there is any expected release date for the I-Trigue 3400/Vivid 80 that will "soon be available in a variety of models and styles"? Thanx in advance .
http://img00.exs.cx/img00/5590/gb055wk.jpg

It's almost definatly a faulty player. Try a firmware update. Go into rescue mode by removing the battery and while replacing the battery holding the power switch in the on position. From there select Reload Firmware via USB. Be sure to download the firmware from the Creative site and I'd suggest using v.0.03.
If this doesn't resolve the issues than contact Creative Support or go back to the store for a return/replacement. The touchpad doesn't rely on pressure per se for movement detection so pressing really hard on the pad isn't something that is normal.

Any solution to resurrect the audio I-Trigue 3400

Hello friends, for those who know the creative teams of 2.1, I have come to the terrible conclusion that I can not do anything to buy or fix the remote control of my sound system 2.1 I-Trigue 3400. For a long time it broke. But I think it's a shame to throw away the subwoofer and two speakers given the short time of use they have.
I wanted to know if anyone can advise me with any alternative to make sound again.
I've thought about the possibility of canceling the system remote control... some cable splicing inside the subwoofer or using a cable that closes the circuit to jump utilities remote control (on / off, volume, bass)So just control the volume from the computer and turn on or off just by disconnecting the plug from the wall. Is this possible?. Has anyone done something similar?
I hope you can help me. It's a shame to waste a stereo that cost money saved while.
Thank you very much!

I have no personal experience on tinkering the volume control pod but if you really want to, you may want to consider bringing the speaker to an electronic shop or if you have knowledge in electronics, you can do it yourself. You can try searching spares on ebay or other third party stores for the volume control pod. I tried googling Itrigue 3400 control pod and found one in ebay (you may want to check it out yourself).
By the way, is your pod: a.) literally broken, b.) no volume at all or c.) volume is erratic? If it's the case of b or c, I was thinking just maybe, it could be a "dirt" issue on the control pod. Overtime, dust gets accumulated on this part (rotating controller) which most of the time is the cause of erratic volume or no volume. You can try opening the control pod's back cover and put some alcohol on it and slowly slide the resistor up and down. See if this helps.

Creative I-Trigue 3400 Spares

Hi,
I have owned the speakers Creative I-Trigue 3400 for a few years now, they do the job fine. However recently the Wired remote control with bass level control has broke, I do not really want to replace these speakers as I think they are great, I do not want to buy the whole package again becuse the subwoofer and speakers are still in good condition.
Therefore I was wandering if there is a place where I can buy spare parts for it's Or any other user which has spares for this item. (I am in the UK) I have tried e-bay but with no luck.
Any help would be appreciated.
Thanks
Nas

I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

Inspire control pod intermittent

I did a forum search but did not find this specificaly.
I have 2 inspire systems. The T-5500 (I think this is it) a 2.1 sys. and the Inspire T-7900 7.1. They both have the same control pod. BOTH of them, out of the box, began having the problem of fading in and out. They fade the vollume level. The green backlighting dims in and out concurrently with the audio. Jiggling the control wheel stops it.
Anyone else with this? Or is it only a coincidence that I got it twice with 2 brand new systems?

I have the exact same problem (vol goes up and down) - in fact this seems to be a very common problem... Creative should do something about this. Even if owners are willing to pay for a fixed volume controller, they are not even stocking this item with the excuse that it's discontinued... sure but I personally feel they can do better as this seems to be a real problem most FPS2000 users are experiencing...

I-TRIGUE 3400 problems

Hello , i am spanish and i try to explain my problem in english... I have bought the I-TRIGUE 3400 speaker, but when i connect the I-TRIGUE to the pc, it doesnt detect it, and i cant listen nothing, do i have to download something? i need a cd? thank you for the answers

lucaspa7,
Your speakers will not require any type of drivers, software, or cd. You will need to verify that your soundcard in your computer is working and outputting sound properly. You can also test the speakers by plugging them into an alternati've audio source such as a portable CD player or portable radio.
Daniel

I-Trigue 3400 Price?

Hello, Im here to enquire about the actual price of the I-Trigue 3400 as I am interested in purchasing them, the website states ?70 but them you have the 3400 series + Free MP3 Player for only 60, anyone else see the problem?

Simusic,
Creative Labs is based in Singapore, so I don't think there is a problem. I am not aware of any knock-off's of this particular product. If you are still concerned, I would recommend contact support to register your product and serial number. If there is any problem with it, they can notify you.
http://www.creative.com/corporate/about/
Daniel

I-trigue 3400

Hi,I've just bought the i-trigue 3400 speaker set. However I am having a few problems playing it through windows and the subwoofer.When the pc is playing directly to the speakers without the speakers it plays well.When my mp3 player is connected to the dock that in turn is connected to the subwoofer it plays well.However when it plays through windows to the subwoofer tospeakers, the left speaker is the dominant one and the right speaker barely plays. I have swapped the connections over and discovered it is the red hole on the subwoofer that has the problem. The right hand speaker plays very quietly. I have to push it against my ear to be able to hear anything. I have checked on volume control to see the allocation of sound to the speaker and they are central. Does anybody know what the problem could be?

Hi Louis,
I am having the exact same problem, how id you sort it out?

T7700 control pod headphone jack not working

I recently moved my PC and it seems in the process that the control pod headphone jack has stopped working, I've tried headphones and a speaker cable to connect up to my tv and there's just nothing apart from the pop/click when I plug them in so I'm assuming there's power getting to them.
I've checked all the cables and they're all in where they should be, this is just a really strange and very annoying problem as I know Creative don't sell replacement pods - although they did used to sell a wireless one with a remote but now I can't even find that for sale on the site.
Anyone had the same/similar problem and been able to fix it's
Thanks

Okay, so when I said all the cables were where they should be they actually kind of weren't, but they were where I've always had them (I had the green and black cables the wrong way round) and I had the speakers - I'm only running a 2.1 setup right now - in the rear ports. I've now corrected it and audio is now coming through my headphone jack once again, really odd how it worked all that time before though.

Speaker Stands for I-trigue 5600

hey
I just bought I-trigue 5600 system and i was intending to get back speaker stands so that i can have them positioned properly.
Creative sight is not giving me any accessories for I-Trigue 5600 does any one know what are the stand style number of part number and where can i get those from in Australia
Any help will be appreciated
regards

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Vollume control pod for i-trigue 3400

Similar Messages

Maybe you are looking for