Voltage in Battery Information Screen

I've been looking around the web trying to find out why my battery has suddenly decided it doesnt want to charge and one of the things I have noticed is that the voltage (mV) my battery screen information screen shows is a lot lower than all the other images i've seen - mine is 8000 odd and all pictures show 12000 odd.
Could this be a reason why my battery is not charging and why is my voltage soo much lower?

actually i have a slighlty different problem.
it says that is in but it doesnt power it.
I also tried to reset smc and all other things and nothings helps
when i put battery in my macbook somethimes i have a really fade green light and then it turn just green and and not orange while i have 0 battery power
and when i check battery in my toolbar it just says battery is not charging who can help.
is this just a software malfunctioning and is a update required or is my battery broken?

Similar Messages

  • HT5137 My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.

    My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.
    It is not even swiched off. the button in the right above side caanot do it. Could you please, help me as soon as possible.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • My mac is not charging, its been like this since morning. Battery Information:    Model Information:   Serial Number:     D86241503EVDKRNAL   Manufacturer:     SMP   Device Name:     bq20z451   Pack Lot Code:     0   PCB Lot Code:     0   Firmware Version

    Battery Information:
      Model Information:
      Serial Number:          D86241503EVDKRNAL
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          000a
      Cell Revision:          162
      Charge Information:
      Charge Remaining (mAh):          778
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6178
      Health Information:
      Cycle Count:          95
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          7440
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Current Power Source:          Yes
      DarkWakeBackgroundTasks:          1
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      DarkWakeBackgroundTasks:          0
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No

    Try doing a SMC RESET and see if that sorts it out for you - had to do that to my Macbook once and it worked for me.
    Good luck.

  • Macbook Battery Information

    Hi,
    I am looking for original Macbook Battery A1185 information of a new battery.
    Here's mine:
    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device Name:          ASMB016
      Pack Lot Code:          2
      PCB Lot Code:          0
      Firmware Version:          110
      Hardware Revision:          500
      Cell Revision:          200
      Charge Information:
      Charge Remaining (mAh):          1347
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          4901
      Health Information:
      Cycle Count:          15
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -2364
    (once the ac adpator was connected this changed to:  Amperage (mA):          2002)
      Voltage (mV):          11009
    I wonder if the "genuine Macbook battery replacement I bought" is genuine and if it is new?

    It is an "original Apple Battery" A1185, sold as genuine and new.
    (Genuine Battery Apple A1185 A1181 MA561 MA566 13" White). I am currently charging it...
    Capacity is stated to be 97% (4901 mAh vs the design capacity 5020 mAh). I am not complaining since it only cost 38 € vs. the 120 € from apple shop. Just wondering if it is really an original or a very very good imitation. It has all stickers and numbers and looks identical to my old one which decided to swell to double size...

  • Battery information is worrying

    i'm new to the forums but i did look at a couple of the older posts. Some people have problems with their batteries and i decided to check mine in the system profiler. I don't exactly know how to interpret it but it says check battery. i don't know if its because of using it a certain number of times or what. any help would be appreciated. I bought it on eBay from a guy who bought it back in May this year (2008) any help would be appreciated. i also made sure that i had the latest battery update (1.3 i believe) and i do.
    Battery Information:
    Model Information:
    Serial Number: Sony-ASMB012-3827-9d2c
    Manufacturer: Sony
    Device name: ASMB012
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0303
    Charge Information:
    Charge remaining (mAh): 2889
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4327
    Health Information:
    Cycle count: 184
    Condition: Check battery
    Battery Installed: Yes
    Amperage (mA): 1521
    Voltage (mV): 12433

    Does the battery charge OK? Do you occasionally calibrate the battery? When fully charged what is reported for "Charge remaining?"
    Normally, Apple guarantees that the battery will retain at least 80% of its original full charge capacity by 300 cycles. Your battery seems to have less than 80% after only 184 cycles suggesting that indeed the battery may be defective. You can call AppleCare or visit your Apple retailer to see if you qualify for a battery replacement.

  • Changing the battery charging screen saver

    Currently when I plug my phone into the charger, the Clock app appears by default. Is there any way to change this default? Also are there any apps that display the amount of battery charge graphically? I'd prefer to have a battery charging screen saver than a clock screen saver.
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    To turn of the clock when charging open the clock>menu key>options>scroll to when charging>do nothing>save>exit.
    I know of an app "Battery-info" by Toysoft listed as .$.099 in AppWorld.
    I'm not endorsing it as I haven't used it, and I'm sure there are other apps as well.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Understanding "Battery Information" - Help Please

    Have 17" G4PB, PPC, 1.5GHz, 1.5G Memory, 80G HD, OSX 10.5.8. Here is my "Battery Information"
    Charge Information:
    Charge remaining (mAh): 2816
    Charging: No
    Full charge capacity (mAh): 2816
    Health Information:
    Cycle count: 388
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12503
    How the heck did I get 388 cycle counts?! And does the 2816 for both "remaining" and "full charge capacity" mean I'm out of juice? This battery is about 1-1/2 years old. Any assistance appreciated.

    Happy thanksgiving!
    The concept of "cycles" is covered in this Apple tech article:
    http://www.apple.com/batteries/
    The bit about "charge remaining" and "full charge capacity" can be understood in the context of a metal drinking cup (fill with your favorite virtual libation, of course):
    When new, the cup hold 12 ounces. Therefore its charge remaining and full charge capacity are roughly the same--12 ounces. If you drink four ounces, the "charge remaining" is 8 oz but the full capacity is still 12.
    Let's say that, after the can is used and bumped around for a few months, it picks up a big dent that intrudes into the interior, reducing how much beer liquid it can hold by two ounces. The "full charge capacity" is now down to 10 ounces or 83 percent of its original capacity. When people talk about battery "health," it's this. Health is current full charge capacity divided by a baseline number, about 5400 for the 17" PowerBook. Your health is therefore 52 percent.
    "Percent charge" in the power icon is how much the present capacity (not original) is currently used. In the bent cup example. even though use reduced the capacity to ten ounces, you can put 10 ounces in it. It's 100 percent full in its present, reduced-volume condition.
    System profiler does not calculate "health" for you and does not give the baseline value. There are a couple of freeware utilities that read the machine type and use the correct baseline to show health as a percentage of the original capacity:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    http://coconut-flavour.com/coconutbattery/index.html
    If I've substituted mud for understanding, please post back and I'll try again.

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • My ipod touch is jammed on the battery charging screen, i have tried hooking up to itunes to reset it but it jams itunes as well. I cannot switch it off either. Can anyone help?

    My ipod touch seems to be jammed on the battery charging screen it has the spining symbol like its trying to load something.  I cannot turn it off. I have tried hooking it up to itunes to reset it, but it seems to jam itunes as well. Any help would b much appreciated.

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Then connecting it to your computer.  If iTunes see it, restore the iPod via iTunes
    - If no sceen in iTunes, see if placing the iPod in recovery mode will make it visible so you can restore it. For recvery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Let, let the battery fully drain and then charger and try again.

  • I seen a iphone 4s at the telstra shop with a pink battery charge screen and i would like to have it on my iphone 4 which is optus and i DONT want to jb it ok thanks

    i seen a iphone 4s at the telstra shop with a pink battery charge screen and i would like to have it on my iphone 4 which is optus and i DONT want to jb it ok thanks

    It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.

  • WHTax Data in Accounting Information Screen of the Co Code View in FK01

    Hi Experts
    Is there any configuration other than the field status for Vendor Account Group, field status at company code level and field status per vendor creation activity for displaying fields in FK01/FK02.
    The With Holding Tax Data field group is missing in Accounting Information Screen of the Co Code View in FK01 in some systems in the Landscape for few company codes. I have checked the field status settings are alright and also checked the authorizations, but still the complete field group is missing from Screen 210 of FK01/FK02. We are trying to upload Vendor Master Records using LSMW.
    Any help would be highly appreciated.
    Thanks & Regards
    KIM Khan

    Hi Atif
    I have checked the field status as already written in my post, also there is no screen variant maintained. I guess there is some setting related to Classic with holding tax and not sure what exactly it would be.
    Regards
    KIM Khan

  • New Macbook Pro stuck on transferring information screen?

    I just purchased a MacBook Pro and attempted transferring my information from my old Asus laptop running Windows 7. I downloaded and installed the Windows Migration Assistant, and about half an hour into the transfer a screen came up on my Asus saying that the connection had been lost. After waiting about an hour with no success, I closed the window on the Asus and decided I could transfer the information at a later time. However, the transferring information screen on my Mac is still up, and I can't get it to close. I would prefer fixing the problem to transfer all of my files now, but I also don't mind simply closing the program entirely and transferring everything later. However, I don't know how to get out of the transfer screen on the Mac. I don't really want to manually shut down the computer, as I haven't entirely finished the setup process. Any ideas? Thanks!

    Welcome to Apple Support Communities
    If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
    In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

  • HT204074 ccount Information screen, click Manage Devices...that step is missing on my page view

    Account Information screen, click Manage Devices...that step is missing on my page view
    in other words i dont see manage Devices when logged into my account on the itunes store through itunes

    Bump.
    All I see is a table with the following:
    Apple ID Summary:   
         <info>
    iTunes in the Cloud:
         <options>
    Purchase History:
         <see all>
    Ping
         <turn off| on>
    Settings
         <settings>
    Please state where there is a button (if there is)

  • How to hide a button in bank information screen permanently

    Hi,
       I would like to hide the "New travel expenses" button located in Bank Information screen. Is it possible??
    Thanks.

    Hello,
    Please, how did you resolve the problem?
    Thank you.

  • In system information, battery information for 17in m.b.p

    in system information, battery information for 17in m.b.p what should the readings be for a new battery,anyone, thanks peter

    If you want reliability and a battery that has a warranty, have Apple install it for you and pay the price.  If you want uncertainty and the possibility of a battery life of a month, a week or less, purchase a third party battery.
    To date I have yet to see with certitude a genuine Apple replacement battery offered to the public.  I have seen many tales of woe of users who have purchased third party batteries and have regretted the decision.  Often in the long run, these purchases cost more than an Apple battery.  Search these forums and my view will be substantiated.
    Your choice.
    Ciao.

Maybe you are looking for

  • Reg mesasge mapping

    HI Guys, i have a requirement where i have a item segment which 0 to unbounded at my source and item segment which is 0 to unbounded in target... and in the target segment i have a field FLAG... for the last item in the source the flag should be mapp

  • TS4062 ive recently updated my IOS, which deleted my music and apps, and it is now not allowing me to press sync, any help?

    ive recently updated my IOS, which deleted my music and apps, and it is now not allowing me to press sync, any help?

  • Audio not playing in slide play mode

    This is an odd problem which I've never come across before. I installed Captivate on a new system. I recorded audio onto a slide. When I edit the audio (have the edit audio screen displaying), it sounds great. In the slide edit view, I can also right

  • Subcontracting Period problem

    Dear Experts, In subcontracting procedure we sent some material to our subcontractor and after processing vendor send only partial quantity to us. Mean time subcontracting perios was over which is 90 days in our case. Now how can we handle the remain

  • Export iWeb data?

    Let's say I spend several years building a very large web site and then decide that Apple isn't up to snuff for what I've got and I want to go hardcore and start using Dreamweaver or GoLive for my site. Does anyone know any utilities that will export