Voltage Interference (and safety) Question

Are there any concerns with having a two-gang box with both 120v and coax/Cat6 feeds in the same box??? Or how about lines running parallel in that same config??? I vaguely remember hearing that can create interference (or even possibly voltage absorption to the coax or Cat lines). Is there any concerns with this? I have one room where I have a box with both 120v and a coax already together in that two-gang box. The lines come from different directions, but ultimately meet up fairly close in the box of course. I did this a few years ago when I was preparing to hang a small TV on that wall and wanted a small footprint in terms of boxes behind the TV. Now as I redo all this anyhow and prepare fpr a FiOS install, I want to ensure I do it correctly and safely. The power is hot, and I checked the exisiting cable signal once and it seemed to be okay. It's a GFI and never trips. Never hung the TV there though to test it for any length of time. Just trying to be safe. Any thoughts anyone?
Solved!
Go to Solution.

http://www.finehomebuilding.com/PDF/Free/021190076.pdf
Also lutron makes wall plates and shows divider plates. This PDF also references the National electrical code restrictions regarding this practice. But I think it is best not to do this. If done you need to use divider plates and run the low voltage in on side of the box and high voltage in the other. Not good to run communications wires and line voltage together.
http://www.lutron.com/CMS400/WorkArea/downloadasset.aspx?id=19725

Similar Messages

How do I log into icloud when I don't remember the password and safety question and it say it will send by e-mail to that address?

What happen was this I had to back up my mom's ipod and her icloud account is well no longer allowing her to log on. So I send for a rest set link and it ended up leading to change my apple idea so I ask to it to her icloud accout but slight problem we don't know where we can go to get that e-mail...so please explain where do we good to get that i try to sign to log into my apple id but it doesn't have anything related to her and I can't seem to find the place where people with only icloud can log in

See Kappy's previous write-up.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

I have a new iPod and now I can't buy something on it ,because of the safety questions. I have not the answers. I can't remember that answer the questions.

I have a new iPod and now I can't buy something on it ,because of the safety questions. I have not the answers. I can't remember that answer the questions.

Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09&11/2012) - https://discussions.apple.com/message/19809294 and https://discussions.apple.com/message/20229239
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

I forget the question and Safety reset but nothing sent email id ******.

I forget the question and Safety reset but nothing sent email id ******
<Personal Information Edited by Host>

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(118214)

HT5312 Forgot your answers to Questions of safety, and email, which sends him re-appoint safety Questions (Not Available I)

Forgot your answers to Questions of safety, and email, which sends him re-appoint safety Questions (Not Available I)
I ask you to help change that sends e-mail to him (re-appoint safety Questions)
Thank you .

You won't be able to change or add a rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to update/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

HT5312 I have a problem in the safety questions and my alternative email forgotten how can I change it please

I have a problem in the safety questions and my alternative email forgotten how can I change it please

If you don't have access to your rescue email address (you won't be able to change it until you can answer 2 of your questions) then see if the instructions on this user tip helps you get the questions reset : https://discussions.apple.com/docs/DOC-4551

Scion IPOD Integration Question and Safety Issue

I have a 2007 Scion TC with the factory pioneer stereo with ipod connection and control from the stereo buttons.
Does anyone know how to fix the problem where when you start scrolling through which song/album you want to select, and then you take a couple of moments to actually drive, the thing resets to the beginning and you have to start all over? This actually forces you to try to keep controlling it if you started to select something new at a stoplight because you don't want to start from the beginning. This is a usability and safety concern and I could see them getting sued for this if someone wrecked.
Max

I can pretty much guarantee that Apple would like to know about your experience, as this is at least a potential safety thing. Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the iPod in to an Apple retail store for evaluation.
Best of luck.

Automatic reorder point and safety stock caluclation- MRP type:V2

Hi,
I want the system to calculate reorder point and safety stock. To simulate this i created one material with
MRP type:V2, service level as 97%, Forecast model:D,Hist. period:12,Forecast periods:12, and I entered
the historical value for past 12 months as 100 nos in material master.
04.2009     100
03.2009     100
02.2009     100
01.2009     100
12.2008     100
11.2008     100
10.2008     100
09.2008     100
08.2008     100
07.2008     100
06.2008     100
05.2008      100
Then I went to MP30 and executed the forcase.When I checkd the material master the system has calculated the reorder point as 14 nos. But there is no value updated in safety stock field.
Now I have two questions.
1) How the system has arrived the reorder point value as 14 nos.
2) Why there is no safety stock updated in material master.
Could u please clarify this.
Thanks and Regards
Purushothaman

Hi,
This is further to my preivous mail. I have changed the consumption values and now i am getting the safety stock.
MRP type:V2, service level as 97%, Forecast model:D,Hist. period:12,Forecast periods:12, and I entered
the historical value for past 12 months as.
04.2009     100
03.2009     80
02.2009     110
01.2009     85
12.2008     90
11.2008     95
10.2008     125
09.2008     90
08.2008     90
07.2008     92
06.2008     101
05.2008     100
After executing the forecase the sytem has calculated the below parameter.
Basic value:95.759
MAD:11.448
Safety stock:10.252
Reorder point:23.658.
Can anyone explain me how these calculation arrived.
Thanks and regards
Purushothaman

Can anybody help me how I can change my safety questions?

I have a new Iphone and now I want to buy some things in Itunes with it. But the problem is that I don't know the answers of my safety questions, I have Itunes a few years. How can I change the questions or get to know what my answers had been?

This article may help
https://discussions.apple.com/docs/DOC-4551

I want to change my password, somebody is using my ID,i follow the rules but unfortunatly i forgot the answer of safety question what can i do

i want to change my password, somebody is using my ID,i follow the rules but unfortunatly i forgot the answer of safety question what can i do?
i recieve a mail form apple team showing reset password link but its not opening

I rang Apple and they could noy help me.
They are often pretty impatient with these questions.
You will need to contact iTunes Support for this. Be prepared to supply the answers that you do know, plus some additional personal information that only you will know.
Start here: https://expresslane.apple.com/
Click iTunes > iTunes Store > Other iTunes topics and questions. Eventually you get to a point at which you can compose a thoughtfully worded email. Apple will respond via email within a day. Be sure to check your spam folder for this reply.
Normal business hours apply, so you may have to wait until Monday. They will ask you for more personal information, and then you will have to wait for another reply which will provide instructions for resetting your password as well as answers to the security questions. Good luck!

Environmental Health and Safety (EHS-Module)

Hi Experts,
Can any one suggests Books for Environmental Health and Safety (EHS-Module)

KC,
You did answer your own question here. Yes, you probably have to build out your health and safety solution. You would have to look at the individual technical requirements for each IDES instance to understand what might be possible.
Regards,
Bob

Static or Dynamic Reorder Point and Safety Stock

Hi,
In a retail scenario, what would be the advantages over the other of setting a static or dynamic reorder point and safety stock?
The MRP type used is Time Phased Planning, but whether to let the system automatically set the reorder point and safety stock is the question. What should be considered in implementing this?
Regards,
Lee

hi,
As far as i know is static means manual entry of reorder point.
The dynamic or automatic reorder point is used for Forecast based planning...
the sysstem wii automatically calculate the reoder point evrytime there is the forecast run.
So, it dependig on ur scenario , select either manual or automatic.
First entry for both is always manual entry....
hope u got this..
Regards,
Smitha

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

Report on current stock and safety stock

Hi,
I want to have the report on current stock and safety stock.
In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
Thanks,
Kiran

You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
use tcode
MBLB to know stock at vendor.
MB54 - Consignment Stock.

Voltage Interferen​ce (and safety) Question

Similar Messages

Maybe you are looking for

Voltage Interference (and safety) Question