VoLTE update....unexpected results

I installed the update. VoLTE isnt rolling out to me until Sept 19.  This update was told to me by VZW to be a prep update. Part 1 of 2.  The option is not there for me in Tethering and Networks to enable VoLTE.  Also the VuTalk uninstall remained and the weather app disappeared though the widget is still there and the process is running.

It's rumored by VZW that a Sept 19, 2014 update will fix the growing number of issues presented after the Sept 11, 2014 24A to 25B update.  My list of issues is growing.  Pop up text window auto exits before text can be entered after keyboard pops up, screen stays on, YouTube opens with screen off, proximity sensor does not allow screen to turn off during call, volume set to silent randomly reverts to lound, weather app missing (though they said the update deleted it and is not included in the update) the com.google.process.gapps has stopped error persists as does the Google Location reporting feature error where settings are reverted to "Off."  I was offered a replacement G2, but was told that if I kept my present phone it would never work correctly until LG released a fix and also that the next update could cause further issues.  this is my 2nd replacement G2 thus far.  I did have another option though.  I could take advantage of a special early upgrade promo and get anything from a Moto-X for $400 to an S5 or G3 for $500!!!!!!!  This is with me having $100 deductible with Asurion at $8 a month.  VZW said it was up to LG to deem the replacement of the device with a different model from a different manufacturer.  I dont quite understand that, and switching carriers (out of spite or even with ETF buyouts) is just silly considering all manufacturers and carriers have issues. I had a couple small issues with my first G2.  I had serious issues after the KitKat update.  Now this update has further issues not resolved from previous updates, and there is still another update on the way for VoLTE, the 2nd part of the Sept 11 update due near or on Sept 19.  then....LOL, another update for Android L sometime in the next 6 months!!!  I guess i should always buy certified refurbished phones to begin with since I have to replace a phone after every update.   Anyhoozer, just a heads up.

Similar Messages

  • Unexpected Result with Application Process

    Hi Everyone,
    I have an application process which is producing unexpected results. The code is below. What does is, updates one table, then based on that update inserts some data into a different table. The process workes fine. However, when the table gets updated it updates by 2 when it should only update by 1. Does anyone see where i am going wrong?
    Its really anoying lol
    Thanks in Advance
    -N.S.N.O.
    Code*
    BEGIN
    update pzrckt01 set CLK_NEXT_NR = CLK_NEXT_NR+1 where CLK_PARTITION_ID='QWC';
    htp.p('Start debugging');
    htp.p('QWC_KEY_ID : ' ||wwv_flow.g_x02);
    htp.p('SYS_ID : ' ||wwv_flow.g_x03);
    htp.p('QWC_DELETE_CD: ' ||wwv_flow.g_x04);
    htp.p('QWC_CUS_ID : ' ||wwv_flow.g_x05);
    htp.p('COU_ID_QWC : ' ||wwv_flow.g_x06);
    insert into PZRCUT01 (QWC_MYTNT_ID,QWC_KEY_ID,SYS_ID,QWC_DELETE_CD,QWC_ADD_TD,QWC_ADD_USER_ID,QWC_UPDT_TD,QWC_UPDT_USER_ID,QWC_SOFTLOCK_TS,QWC_CUS_ID,COU_ID_QWC) values ((select clk_next_nr from pzrckt01 where CLK_PARTITION_ID ='QWC'),wwv_flow.g_x02,wwv_flow.g_x03,wwv_flow.g_x04,(select sysdate from dual),(select :APP_USER from dual),(select sysdate from dual),(select :APP_USER from dual),(select systimestamp from dual),wwv_flow.g_x05,wwv_flow.g_x06);
    EXCEPTION WHEN OTHERS THEN
    htp.p('Exception');
    htp.p(SQLERRM);
    END;

    Hey,
    There are no triggers on these tables im working with. A way to get around waht im tryin to do is have 2 application processes, one for the update and one for the insert. but to do this i would need them to be fired off using the same button.
    for example in my HTML Header having a function within a function.
    function pzrcut01Insert(){
    function pzrckt01Update(){
    var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=update_pzrckt01',null);
    var ajaxRequest1 = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=PZRCUT01_INSERT',null);
    ajaxRequest1.addParam('x02', $v('P6_QWC_KEY_ID'));
    ajaxRequest1.addParam('x03', $v('P6_SYS_ID'));
    ajaxRequest1.addParam('x04', $v('P6_QWC_DELETE_CD'));
    ajaxRequest1.addParam('x05', $v('P6_QWC_CUS_ID'));
    ajaxRequest1.addParam('x06', $v('P6_COU_ID_QWC'));
    var Answer = confirm('Are you sure you want to update?');
    if (Answer) {
    gReturn=ajaxRequest1.get();
    if (gReturn) {
    alert(gReturn);
    ajaxRequest1.get();
    alert('Attempted Insert Processed');
    }else{
    alert('Attempted Insert Cancelled');
    would this be possible?
    -N.S.N.O.

  • ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

    Hi,
    We try to install sccm 2012 serondary site in server 2012. It always failed.
    I used the rereqchek tools to check system enviroment locally. All passed.
    The primary site installed in server 2012.  Both server had granted the administrator permission.
    Anyone can help to check the below Configmgrprereq.log
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> Commandline :
    "D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    <01-16-2015 08:47:55> Check Type: Secondary site
     Site Server: DPServer.ms.com,
     SQL Server: DPServer.ms.com,
     SQL Named Instance: ,
     Install Folder: d:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: D:\SCCM2012\Source
    <01-16-2015 08:47:55> INFO: Executing prerequisite functions...
    <01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
    <01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
    the SQL Server and management point computers.
    <01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
    <01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
    <01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
    2008 SP2 or later.
    <01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
    <01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
    <01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
    <01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
    <01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
    <01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
    <01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
    <01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
    <01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
    <01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
    server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
    Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
    <01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
    <01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
    <01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
    <01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
    requirement.  Configuration Manager requires at least Windows Installer version 4.5.
    <01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
    <01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
    <01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
    <01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
    <01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
    <01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
    <01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
    or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
    <01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
    <01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
    site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
    <01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    <01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
    <01-16-2015 08:49:55> INFO: SQL Server named instance <>
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
    <01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
    <01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
    <01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
    <01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
    <01-16-2015 08:50:05> INFO: .NET is installed
    <01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    <01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
    <01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
    <01-16-2015 08:50:10> INFO: .NET is installed
    <01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    <01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
    <01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
    <01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
    <01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
    <01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
    recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
    <01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
    <01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
    <01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
    <01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
    <01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
    <01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
    <01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
    <01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
    for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
    permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
    <01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
    <01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
    <01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
    <01-16-2015 08:53:44> INFO: LangID <409>
    <01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
    <01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
    <01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
    <01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
    <01-16-2015 08:53:44> INFO: getaddrinfo returned success.
    <01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
    <01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
    <01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
    Server 2008 SP2 or later.
    <01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
    <01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
    <01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
    requires IIS. Install IIS on the site system to continue setup.
    <01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
    is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
    not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
    <01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    <01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
    <01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
    <01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
    <01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
    client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
    <01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
    <01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
    Windows Server 2003 or later.
    <01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
    Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
    <01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
    <01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
    <01-16-2015 08:56:09> INFO: Setting registry values
    <01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
    on the SQL Server and management point computers.
    Actually the administrative permission had been granted.

  • Updating podcasts results in iTunes freezing

    Updating podcasts results in iTunes freezing
    iTunes works until it searches for new podcasts and then it stops working and shows the spinning beachball of death.
    I am running 11.0.2 and it started immediately after installing it.
    I have reinstalled itunes numerous times.
    I am running 10.8.3
    Help

    Well if the content is split over two different folders it can't also be in the same one. There must be some kind of semantic difference between the two, e.g. different non-printing characters...
    tt2

  • Network Model  - Arcs create unexpected results

    Hello Spatial Users,
    I have created a road network using the "Automatic" Network Definition, loaded all the nodes and links, and everything seems to be OK. It all validates, links and nodes have the correct values. It is an undirected network.
    I can create shortest paths, but the issue I'm having is arcs within the links are returning unexpected results. It is as though the start of the arc is used and then it follows the arc and jumps back to the end of the line - so the shortest path is not the shortest with all this jumping from start to finish of the arcs within the line string.
    Do I need to convert the arcs to lines or am I missing something else? I was hoping that because it was 'undirected' this would resolve this issue.
    We are using 11.1.0.6.0.
    Thanks for your help,
    Kerryne

    Hi, Kerryne,
    NDM doesn't support arcs in its spatial path representation. For arcs it will only use start and end pt of the arc. You need to approximate arcs as linear segments for link geometry to get a more accurate path geometry.
    Regards,
    Jack

  • Unexpected result from treenode.getPath() ???

    Hi,
    I am using Jtree in application.
    The tree is as following
    - Desktop
          -C:\
              - Folder1
              - File2
         - D:\I want to expend the node Folder1 as selected node. To do that I got the FileNode Folder1 and do
    TreePath path=new TreeaPath( folder1node.getPath() );
    int row=tree.getRowForPath(path);
    jtreetable.expend(row);
    But the problem is with the path returned. I must get the path [Desktop, C:\, Folder1] but I am getting path [Folder1].
    What I am doing wrong. Is there any other way to expend a particular node programatically ?
    Thanks

    Andy,
    You should contact support with regards to this issue. It is a known
    problem, you can reference CR042529.
    Cheers!
    Adam
    "Andy Kimbrough" <[email protected]> wrote in message
    news:3ae8b1f7$[email protected]..
    randomly I get the following error in my weblogic.log. The server stopsresponding and I get about a million of these entries, what is going on? I
    am running on Linux 6.2....<Error> <Posix Performance Pack>
    <mdw2.neomorphic.com> <myserver> <ExecuteThread: '49' for queue: 'default'>
    <><><00000><Uncaught Throwable in processSockets>java.io.IOException:
    unexpected result from poll: -1at weblogic.socket.PosixSocketMuxer.pool
    (Native Method)at weblogic.socket.PosixSocketMuser.processSocktesat
    weblogic.socket.SocketReaderRequest.executeat
    weblogic.kernel.ExecuteThread.executeat weblogic.kernel.ExceuteThread.run

  • Method from Random class yields unexpected results

    Hi,
    I understand that the following code should generate a random integer within the range of 0 - 3, but the range is actually 0 - 4. Can someone tell me why it doesn't behave as expected? Could it be the version of Java I'm using?
    Random rand = new Random(47);
    int a = rand.nextInt(4);Thanks!

    gluedtothecomputer wrote:
    You're right! It seemed to be producing unexpected results because I had incorporated a switch statement without breaks (part of my assignment). So, .nextInt() works as expected.
    Thanks!Since you didn't post that code or even allude to it, it would have been hard for use to guess that's what you did, right?
    That's why the best way to ask for help is for you to write and post a SSCCE .
    Keep that in mind for your next post.

  • HT5945 new macbook pro loaded with mavericks. installed CS3 including prompted Java update. try to open photoshop &  empty splash screen pops up-can't go further. tried newer java update-same result. re-opened 4 times-same. help!!

    new macbook pro loaded with mavericks. installed CS3 including prompted Java update. try to open photoshop &  empty splash screen pops up-can't go further. tried newer java update-same result. shut down 4 times-same. any suggestions?

    Kappy wrote:
    Has it occurred to you that CS3 isn't compatible with Mavericks? Try using CS9 or 10.
    Sorry that's untrue. I have Photoshop CS3 running on 10.9.
    CS9 or 10? Now you are just making stuff up.
    Adobe claim CS3 will work, with a minor issue…
    http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
    The Adobe updater fails to work for me.
    I was prompted to install J6RE which came from Apple, check the Apple support downloads http://support.apple.com/downloads/#java%206
    Sorry can't provide a direct link, it was just a dumb 'You need … please click install' dialog.
    I think the 10.9 java updater is installing version 7.

  • Colors in JTable - unexpected result when scrolling

    Hi Guys,
    Looks like I'm having a problem with a JTable.
    I have a list of items and they are distinguished by 2 colors (so the end-user can differentiate between them). Anyway, the table colors work ok but when using a JScrollbar the table receives an unexpected result � few of the first items (which are not identical) share the same color.
    anyone?
    Example of an output (Gil will be colored Green, Dan Yellow, James Green�and so forth)
    Gil
    Gil
    Gil
    Dan
    Dan
    Dan
    James
    James
    James
    James
    my code looks like this (I'll appritiate if someone can point out where I can have the html tags to display it correctly)
    aTable = new JTable(dataModel)
    public Component prepareRenderer(TableCellRenderer r, int row, int col)
    Component c = super.prepareRenderer(r, row, col);
    Color bg = Color.YELLOW;
    String[] valuesRaw = (String[]) model.elementAt(row);
    if (changeRround)
    name1=valuesRaw[0];
    changeRround=false;
    name2=valuesRaw[0];
    if (!name1.equals(name2))
    this.switchColor(bg,c);
    changeRround=true;
    return c;
    public void switchColor(Color bg, Component c)
    if (colorSwitcher%2==0)
    bg = new Color(221, 250, 207);
    c.setBackground(bg);
    c.setForeground(Color.BLACK);
    else
    bg = new Color(253, 252, 193);
    c.setBackground(bg);
    c.setForeground(Color.BLACK);
    colorSwitcher++;
    }

    I'm getting there...
            aTable = new JTable(dataModel)
                public Component prepareRenderer(TableCellRenderer r, int row, int col)
                     Component c = super.prepareRenderer(r, row, col);
                     Color bg = Color.YELLOW;         
                     String[] valuesRaw = (String[]) model.elementAt(row);         
                     if (changeRround)
                         name1=valuesRaw[0];
                         changeRround=false;
                         name2=valuesRaw[0];
                     if (name1.equals(name2))
                     else
                         this.switchColor(bg,c);                    
                         changeRround=true;
                     return c;
                 public void switchColor(Color bg, Component c)
                    if (colorSwitcher%2==0)
                        bg = new Color(221, 250, 207);
                        c.setBackground(bg);
                        c.setForeground(Color.BLACK);
                    else
                        bg = new Color(253, 252, 193);
                        c.setBackground(bg);
                        c.setForeground(Color.BLACK);
                    colorSwitcher++;
                }

  • Update payroll Results

    Hi SAP Gurs,
    Is there any function module or procedure to update payroll results Please let me know.
    Thanks,

    Hi,
    PYXX_WRITE_PAYROLL_RESULT is the function module.
    Please use this for your requirement.
    Thanks,

  • Bad Reception After VoLTE Update

    Ever since I update the Turbo with the VoLTE update, my call reception dropped significantly.  However, the reception gets better once I turn off the Advanced Calling feature.  Anyone else have this problem?  Any fixes?  Suggestions?

    I'm having the same trouble as well. Call reception is horrible at my home after getting the volte update an enabling advanced calling.
    I think the issue is that I have half a bar of 4g at home and thats not enough of a signal for advanced calling. Turning advanced calling of helps but then I can't have mobile data during a phone call when I'm back in good 4g quality areas.   If I'm home and the phone switched to 3g the quality is better, I think because advanced calling isn't in use.

  • Updating the result from Labveiw to Test stand!

    Hello, I
    have a quick question; i am using Labview 8.5 & Test Stand. I am
    develeoping Test Scripts using Labview for the design & using them in
    Teststand as PASS/FAIL tests. My question is when i run the tests in teststand
    its showing that the tests what i have written in labview has been passed but
    when i remove the connection to UUT & run the same its showing that tests
    are passed. Actually at this time it should show that the tests are failed
    since the connection to UUT is not present. But on the lab view window its showing
    the proper result(that the is failed due to to bad connection) but on the test
    stand window side its showing erroneous results i.e. tests are passed(i.e. the
    result is not being updated from lab view to test stand window). What should I  do  to
    update the result from lab veiw to testand . I have this problem from couple of
    days.
    Any help
    would be appreciated.
    Thanks.

    Hi basha,
    Looking at your Sequence File and the Pass / Fail Step in MainSequence.
    Although you have three connections on your VI FT_Open_Device_By_Sreial_Number.vi (one input, two outputs),
    within your step, you haven't connected them to any TestStand variables.
    I have attached the FileGlobals.Handle to the Handle output of your VI as an example.
    You need to do something similar for Device Serial Number and FT_Status.
    I am not sure where this top level vi comes in, are you hoping to replace FT_Open_Device_By_Sreial_Number.vi with this top level vi.
    If you are then you need to connect on input and output to its connector pane. I would suggest the boolean result is one of the ouptut
    Which you connect to Step.Result.Pass/Fail
    Regards
    Ray
    Message Edited by Ray Farmer on 03-10-2008 10:04 PM
    Regards
    Ray Farmer
    Attachments:
    vi.PNG ‏25 KB
    Specify Pass_Fail.PNG ‏24 KB
    top level.PNG ‏6 KB

  • Batch Characteristic not updating with result for linked MIC

    Hi,
    I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
    If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
    If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
    Can you help regards?

    Ok. I am a little bit further.
    I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
    In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
    Hope that this can help to solve my problem.
    Regards,
    René
    @ Mayank
    Above, all the master data and customizing is mentioned to transfer the result to the batch classification
    Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

  • The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C   Runtime Library is being accessed incorrectly.  Anyone know how to overcome the problem?  I am using a Dell Inspiron  9400 running Vista.

    The latest update to itunes has resulted in a whole series of runtime errors (R6034).  Microsoft Visual C++ Runtime Library states it is being accessed incorrectly.  I am also told that Apple Mobile Device Failed to Start.  Additional messages suggest the error is in itunes.exe and ituneshelper.exe.  I also get Error 7 (Windows error 1114).  Anyone got any ideas how to overcome this (these) problems?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99527)

  • [Solved] Update gnome results to hang in gdm

    I guess this what happens when waiting a long time to update. This laptop has arch and linux mint dual booting. Arch is running on gnome and i think the last time I used it was 2 weeks ago (or more). It boots fine from grub but hangs upon reaching gdm. Keys dont work nor the touchpad. I have to remove the battery to restart it. This is my second laptop running arch. I got used to the other one running kde then I realize have to update the gnome laptop. Please help.
    This is error log.
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:05:27 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:10:28 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:15:29 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:20:30 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:21:03 bibs-msiCX500DX-arch -- MARK --
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:25:31 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:30:32 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:35:33 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:40:34 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:41:03 bibs-msiCX500DX-arch -- MARK --
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:45:35 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:50:36 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 18:55:37 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:00:38 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:01:03 bibs-msiCX500DX-arch -- MARK --
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:05:39 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:06:18 bibs-msiCX500DX-arch NetworkManager[1806]: <info> kernel firmware directory '/lib/firmware' changed
    Feb 5 19:06:26 bibs-msiCX500DX-arch modprobe: FATAL: Could not load /lib/modules/2.6.36-ARCH/modules.dep: No such file or directory
    Feb 5 19:07:00 bibs-msiCX500DX-arch dbus-daemon: [system] Reloaded configuration
    Feb 5 19:07:06 bibs-msiCX500DX-arch dbus-daemon: [system] Reloaded configuration
    Feb 5 19:07:06 bibs-msiCX500DX-arch dbus-daemon: [system] Reloaded configuration
    Feb 5 19:07:06 bibs-msiCX500DX-arch dbus-daemon: [system] Reloaded configuration
    Feb 5 19:07:06 bibs-msiCX500DX-arch dbus-daemon: [system] Reloaded configuration
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:10:40 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:15:41 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:20:42 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:21:03 bibs-msiCX500DX-arch -- MARK --
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:25:43 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:30:44 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:34:56 bibs-msiCX500DX-arch shutdown[24940]: shutting down for system reboot
    Feb 5 19:34:57 bibs-msiCX500DX-arch acpid: client 1871[0:0] has disconnected
    Feb 5 19:34:57 bibs-msiCX500DX-arch acpid: client connected from 24961[0:0]
    Feb 5 19:34:57 bibs-msiCX500DX-arch acpid: 1 client rule loaded
    Feb 5 19:34:58 bibs-msiCX500DX-arch kernel: Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    Feb 5 19:34:58 bibs-msiCX500DX-arch init: Switching to runlevel: 6
    Feb 5 19:34:59 bibs-msiCX500DX-arch acpid: exiting
    Feb 5 19:34:59 bibs-msiCX500DX-arch NetworkManager[1806]: <info> caught signal 15, shutting down normally.
    Feb 5 19:34:59 bibs-msiCX500DX-arch NetworkManager[1806]: <info> (wlan0): now unmanaged
    Feb 5 19:34:59 bibs-msiCX500DX-arch NetworkManager[1806]: <info> (wlan0): device state change: 2 -> 1 (reason 36)
    Feb 5 19:34:59 bibs-msiCX500DX-arch NetworkManager[1806]: <info> exiting (success)
    Feb 5 19:34:59 bibs-msiCX500DX-arch laptop-mode: Laptop mode
    Feb 5 19:34:59 bibs-msiCX500DX-arch laptop-mode: disabled, not active
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpuset
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpu
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-provided physical RAM map:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: DMI present.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: found SMP MP-table at [c00ff780] ff780
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Scanning 0 areas for low memory corruption
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: init_memory_mapping: 0000000000000000-00000000377fe000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: RAMDISK: 37e59000 - 37ff0000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Allocated new RAMDISK: 37667000 - 377fd7d2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Move RAMDISK from 0000000037e59000 - 0000000037fef7d1 to 37667000 - 377fd7d1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: RSDP 000f9dc0 00014 (v00 MSI_NB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: RSDT 7ffb0000 00048 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: FACP 7ffb0200 00084 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: DSDT 7ffb0670 057BD (v01 MSI_NB 00000000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: FACS 7ffbe000 00040
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: APIC 7ffb0390 0006C (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: MCFG 7ffb0400 0003C (v01 MSI_NB OEMMCFG 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SLIC 7ffb0440 00176 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: WDRT 7ffb05c0 00047 (v01 MSI_NB OEMWDRT 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: ECDT 7ffb0610 00054 (v01 MSI_NB OEMECDT 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: OEMB 7ffbe040 00072 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: HPET 7ffb5e30 00038 (v01 MSI_NB OEMHPET 20100413 MSFT 00000097)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe9f0 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: 1159MB HIGHMEM available.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: 887MB LOWMEM available.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: mapped low ram: 0 - 377fe000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: low ram: 0 - 377fe000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Zone PFN ranges:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: DMA 0x00000010 -> 0x00001000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Normal 0x00001000 -> 0x000377fe
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: HighMem 0x000377fe -> 0x0007ffb0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Movable zone start PFN for each node
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: early_node_map[2] active PFN ranges
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: 0: 0x00000010 -> 0x0000009f
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: 0: 0x00000100 -> 0x0007ffb0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Using APIC driver default
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PM-Timer IO Port: 0x808
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Using ACPI (MADT) for SMP configuration information
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: HPET id: 0x10398201 base: 0xfed00000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Booting paravirtualized kernel on bare hardware
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PERCPU: Embedded 12 pages/cpu @f6000000 s27264 r0 d21888 u1048576
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing CPU#0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: allocated 10483840 bytes of page_cgroup
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing HighMem for node 0 (000377fe:0007ffb0)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Memory: 2061288k/2096832k available (3163k kernel code, 35092k reserved, 1238k data, 424k init, 1187528k highmem)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: virtual kernel memory layout:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: .init : 0xc144d000 - 0xc14b7000 ( 424 kB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: .data : 0xc1316d40 - 0xc144c560 (1238 kB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: .text : 0xc1000000 - 0xc1316d40 (3163 kB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Preemptable hierarchical RCU implementation.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: RCU-based detection of stalled CPUs is disabled.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Verbose stalled-CPUs detection is disabled.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NR_IRQS:512
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Console: colour VGA+ 80x25
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: console [tty0] enabled
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Fast TSC calibration using PIT
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Detected 2200.104 MHz processor.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.55 BogoMIPS (lpj=7333680)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pid_max: default: 32768 minimum: 301
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Security Framework initialized
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Mount-cache hash table entries: 512
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys ns
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpuacct
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys memory
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys devices
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys freezer
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys net_cls
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys blkio
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: CPU: Physical Processor ID: 0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: CPU: Processor Core ID: 0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: mce: CPU supports 6 MCE banks
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: using mwait in idle threads.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... version: 2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... bit width: 40
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... generic registers: 2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... value mask: 000000ffffffffff
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... max period: 000000007fffffff
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... fixed-purpose events: 3
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ... event mask: 0000000700000003
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Core revision 20101013
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NMI watchdog enabled, takes one hw-pmu counter.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Booting Node 0, Processors #1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initializing CPU#1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NMI watchdog enabled, takes one hw-pmu counter.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Brought up 2 CPUs
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Total of 2 processors activated (8803.95 BogoMIPS).
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: devtmpfs: initialized
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NET: Registered protocol family 16
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: bus type pci registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: not using MMCONFIG
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: Using configuration type 1 for base access
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: bio: create slab <bio-0> at 0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: EC: EC description table is found, configuring boot EC
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe190 00225 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Dynamic OEM Table Load:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT (null) 00225 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe450 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Dynamic OEM Table Load:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT (null) 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe0c0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Dynamic OEM Table Load:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Dynamic OEM Table Load:
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Interpreter enabled
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: (supports S0 S3 S4 S5)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: Using IOAPIC for interrupt routing
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: Using MMCONFIG for extended config space
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: No dock devices found.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:06.0: PCI bridge to [bus 02-02]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:07.0: PCI bridge to [bus 03-03]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 12 14 15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 *15)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: HEST: Table is not found!
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: vgaarb: loaded
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PCI: Using ACPI for IRQ routing
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NetLabel: Initializing
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NetLabel: domain hash size = 128
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NetLabel: unlabeled traffic allowed by default
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Switching to clocksource tsc
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pnp: PnP ACPI init
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: bus type pnp registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pnp: PnP ACPI: found 12 devices
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ACPI: ACPI bus type pnp unregistered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0290-0x0297] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0c00-0x0c05] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0d00-0x0d05] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0480-0x048f] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0800-0x087f] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0880-0x08ff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [io 0x0c00-0x0c7f] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [mem 0xffee0000-0xffefffff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:04: [mem 0xfed10000-0xfed8ffff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:06.0: PCI bridge to [bus 02-02]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:06.0: bridge window [io disabled]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:06.0: bridge window [mem pref disabled]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:07.0: PCI bridge to [bus 03-03]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:07.0: bridge window [io disabled]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:07.0: bridge window [mem disabled]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pci 0000:00:07.0: bridge window [mem pref disabled]
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NET: Registered protocol family 2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: TCP: Hash tables configured (established 131072 bind 65536)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: TCP reno registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NET: Registered protocol family 1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Unpacking initramfs...
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Freeing initrd memory: 1628k freed
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: apm: BIOS not found.
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Scanning for low memory corruption every 60 seconds
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: audit: initializing netlink socket (disabled)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: type=2000 audit(1296934573.426:1): initialized
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: highmem bounce pool size: 64 pages
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: VFS: Disk quotas dquot_6.5.2
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: msgmni has been set to 1709
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: io scheduler noop registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: io scheduler deadline registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: io scheduler cfq registered (default)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pcieport 0000:00:01.0: ACPI _OSC control granted for 0x19
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pcieport 0000:00:06.0: ACPI _OSC control granted for 0x19
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pcieport 0000:00:07.0: ACPI _OSC control granted for 0x19
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ERST: Table is not found!
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: isapnp: Scanning for PnP cards...
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: isapnp: No Plug & Play device found
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: mice: PS/2 mouse device common for all mice
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: rtc_cmos 00:06: RTC can wake from S4
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: cpuidle: using governor ladder
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: cpuidle: using governor menu
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: TCP cubic registered
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: NET: Registered protocol family 17
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Registering the dns_resolver key type
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Using IPI No-Shortcut mode
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: registered taskstats version 1
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: rtc_cmos 00:06: setting system clock to 2011-02-05 19:36:14 UTC (1296934574)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Initalizing network drop monitor service
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Freeing unused kernel memory: 424k freed
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: udev[37]: starting version 165
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: SCSI subsystem initialized
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi0 : pata_sis
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi1 : pata_sis
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: pata_acpi 0000:00:05.0: PCI INT A disabled
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sata_sis 0000:00:05.0: version 1.0
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi2 : sata_sis
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi3 : sata_sis
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata3: PATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xc800 irq 17
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata4: PATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc808 irq 17
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata3.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata3.00: configured for UDMA/133
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata4.00: ATAPI: HL-DT-STDVDRAM GT32N, AS00, max UDMA/100
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: ata4.00: configured for UDMA/100
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N AS00 PQ: 0 ANSI: 5
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sd 2:0:0:0: [sda] Write Protect is off
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sd 2:0:0:0: [sda] Attached SCSI disk
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: udev[486]: starting version 165
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: EXT4-fs (sda2): re-mounted. Opts: (null)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: EXT4-fs (sda2): re-mounted. Opts: (null)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    Feb 5 19:36:23 bibs-msiCX500DX-arch kernel: Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k
    Feb 5 19:36:24 bibs-msiCX500DX-arch acpid: starting up
    Feb 5 19:36:24 bibs-msiCX500DX-arch acpid: 4 rules loaded
    Feb 5 19:36:24 bibs-msiCX500DX-arch acpid: waiting for events: event logging is off
    Feb 5 19:36:24 bibs-msiCX500DX-arch laptop-mode: Laptop mode
    Feb 5 19:36:24 bibs-msiCX500DX-arch laptop-mode: enabled, not active
    Feb 5 19:36:25 bibs-msiCX500DX-arch NetworkManager[1231]: <info> NetworkManager (version 0.8.3) is starting...
    Feb 5 19:36:25 bibs-msiCX500DX-arch NetworkManager[1231]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Feb 5 19:36:25 bibs-msiCX500DX-arch NetworkManager[1231]: <info> trying to start the modem manager...
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: ModemManager (version 0.4) starting...
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Option High-Speed
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin SimTech
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Gobi
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin ZTE
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Novatel
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Generic
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Option
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Sierra
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Huawei
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin MotoC
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin AnyData
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Ericsson MBM
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Nokia
    Feb 5 19:36:25 bibs-msiCX500DX-arch modem-manager: Loaded plugin Longcheer
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: cannot execute "/usr/bin/xdm"
    Feb 5 19:36:26 bibs-msiCX500DX-arch init: Id "x" respawning too fast: disabled for 5 minutes
    Feb 5 19:36:23 bibs-msiCX500DX-arch init: Entering runlevel: 5
    Feb 5 19:36:26 bibs-msiCX500DX-arch polkitd[1250]: started daemon version 0.99 using authority implementation `local' version `0.99'
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: keyfile: parsing Auto eth0 ...
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: keyfile: read connection 'Auto eth0'
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> WiFi enabled by radio killswitch; enabled by state file
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> WWAN enabled by radio killswitch; enabled by state file
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> Networking is enabled by state file
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> modem-manager is now available
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
    Feb 5 19:36:26 bibs-msiCX500DX-arch NetworkManager[1231]: <info> Trying to start the supplicant...
    Feb 5 19:36:27 bibs-msiCX500DX-arch acpid: client connected from 1297[0:0]
    Feb 5 19:36:27 bibs-msiCX500DX-arch acpid: 1 client rule loaded
    Feb 5 19:36:27 bibs-msiCX500DX-arch kernel: pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
    Feb 5 19:41:01 bibs-msiCX500DX-arch kernel: atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpuset
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpu
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-provided physical RAM map:
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: DMI present.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: found SMP MP-table at [c00ff780] ff780
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Scanning 0 areas for low memory corruption
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: init_memory_mapping: 0000000000000000-00000000377fe000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: RAMDISK: 37e59000 - 37ff0000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Allocated new RAMDISK: 37667000 - 377fd7d2
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Move RAMDISK from 0000000037e59000 - 0000000037fef7d1 to 37667000 - 377fd7d1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: RSDP 000f9dc0 00014 (v00 MSI_NB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: RSDT 7ffb0000 00048 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: FACP 7ffb0200 00084 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: DSDT 7ffb0670 057BD (v01 MSI_NB 00000000 INTL 20051117)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: FACS 7ffbe000 00040
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: APIC 7ffb0390 0006C (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: MCFG 7ffb0400 0003C (v01 MSI_NB OEMMCFG 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: SLIC 7ffb0440 00176 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: WDRT 7ffb05c0 00047 (v01 MSI_NB OEMWDRT 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: ECDT 7ffb0610 00054 (v01 MSI_NB OEMECDT 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: OEMB 7ffbe040 00072 (v01 MSI_NB MEGABOOK 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: HPET 7ffb5e30 00038 (v01 MSI_NB OEMHPET 20100413 MSFT 00000097)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: SSDT 7ffbe9f0 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: 1159MB HIGHMEM available.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: 887MB LOWMEM available.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: mapped low ram: 0 - 377fe000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: low ram: 0 - 377fe000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Zone PFN ranges:
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: DMA 0x00000010 -> 0x00001000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Normal 0x00001000 -> 0x000377fe
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: HighMem 0x000377fe -> 0x0007ffb0
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Movable zone start PFN for each node
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: early_node_map[2] active PFN ranges
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: 0: 0x00000010 -> 0x0000009f
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: 0: 0x00000100 -> 0x0007ffb0
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Using APIC driver default
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: PM-Timer IO Port: 0x808
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Using ACPI (MADT) for SMP configuration information
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: HPET id: 0x10398201 base: 0xfed00000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Booting paravirtualized kernel on bare hardware
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PERCPU: Embedded 12 pages/cpu @f6000000 s27264 r0 d21888 u1048576
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing CPU#0
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: allocated 10483840 bytes of page_cgroup
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing HighMem for node 0 (000377fe:0007ffb0)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Memory: 2061288k/2096832k available (3163k kernel code, 35092k reserved, 1238k data, 424k init, 1187528k highmem)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: virtual kernel memory layout:
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: .init : 0xc144d000 - 0xc14b7000 ( 424 kB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: .data : 0xc1316d40 - 0xc144c560 (1238 kB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: .text : 0xc1000000 - 0xc1316d40 (3163 kB)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Preemptable hierarchical RCU implementation.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: RCU-based detection of stalled CPUs is disabled.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Verbose stalled-CPUs detection is disabled.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: NR_IRQS:512
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Console: colour VGA+ 80x25
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: console [tty0] enabled
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Fast TSC calibration using PIT
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Detected 2200.349 MHz processor.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4402.06 BogoMIPS (lpj=7334496)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: pid_max: default: 32768 minimum: 301
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Security Framework initialized
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Mount-cache hash table entries: 512
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys ns
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys cpuacct
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys memory
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys devices
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys freezer
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys net_cls
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing cgroup subsys blkio
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: CPU: Physical Processor ID: 0
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: CPU: Processor Core ID: 0
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: mce: CPU supports 6 MCE banks
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: using mwait in idle threads.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... version: 2
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... bit width: 40
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... generic registers: 2
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... value mask: 000000ffffffffff
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... max period: 000000007fffffff
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... fixed-purpose events: 3
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ... event mask: 0000000700000003
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: Core revision 20101013
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: NMI watchdog enabled, takes one hw-pmu counter.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Booting Node 0, Processors #1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Initializing CPU#1
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: NMI watchdog enabled, takes one hw-pmu counter.
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Brought up 2 CPUs
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: Total of 2 processors activated (8804.46 BogoMIPS).
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: devtmpfs: initialized
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: NET: Registered protocol family 16
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: ACPI: bus type pci registered
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PCI: not using MMCONFIG
    Feb 5 19:44:16 bibs-msiCX500DX-arch kernel: PCI: P

    Hi there. Below are my .xinitrc and rc.conf files. I tried changing from xdm to gdm in my inittab but no go I still hang when reaching gdm.
    @RicardoAR: I dont know if I am using prelink. I can try checking it in pacman's cache/pkg folder. If none will download in the repos. I understand your message pretty much and will try this exercise.
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    # ...or the Window Manager of your choice
    # exec xterm
    #exec ck-launch-session openbox-session
    #exec ck-launch-session startlxde
    exec ck-launch-session gnome-session
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    #HARDWARECLOCK="UTC"
    HARDWARECLOCK="localtime"
    TIMEZONE="Asia/Riyadh"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(fuse)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="bibs-msiCX500DX-arch"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="eth0 10.114.201.248 netmask 255.255.255.0 broadcast 10.114.201.255"
    #use dhcp
    eth0="dhcp"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 10.114.201.254"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    #DAEMONS=(syslog-ng network netfs crond alsa fuse slim)
    DAEMONS=(syslog-ng dbus laptop-mode networkmanager netfs crond fuse gdm @alsa @cpufreq)

Maybe you are looking for

  • Error while starting weblogic Managed Server

    Hi , I am new to SOA 11g. I installled the latest version(11.1.1.4) of all the components.I started web logic and able to login into Admin Console but I have a problem while starting Managed Server.It gives me an error saying <Feb 2, 2011 2:01:29 PM

  • Purchase Order Error Message

    How can I create or enable an error message when a PO is created using articles, that checks to see if there are upc's that might be missing from the articles.  We can right now create a PO with articles that do not have any UPC/EAN attached to the a

  • How to find my catalog in LR 5.5

    I have created 4 different catalogs over time. How do you find each one?

  • I have an iPhone 4. How do I access my photos on a PC

    I have an iPhone 4 and am having trouble accessing my photos on a Windows PC. Pleas help

  • Handaling an exception

    Hi, i have a asynch scenario - File -> XI - > Abap Proxy, i would like to do some validation checks on the proxy side and if there are error t return it back to XI. How would you suggest to implement it?