Volume 100% after upgrading

Hello.
After installing the latest flash player for windows I get volume 100%, too loud.
In the previous builds I have selected volume 20%. f-player closed (in FF3.6). When I have re-opened the player the volume was still 20%. super!
but now I get 100%. this is strange.
how to do to set the volume definitively to 20% ?? I'd like that the default volume of flash player were 20%.
thanks a lot in advance.
best regards.

This is a known issue in Firefox (please vote for this bug: https://bugbase.adobe.com/index.cfm?event=bug&id=3210127). I've alerted the audio team and we're working with Microsoft to resolve this. This is related to the new protected mode in Firefox. You can work around this issue by either disabling protected mode or reverting to a previous version of Flash Player.
How do I troubleshoot Flash Player's protected mode for Firefox?

Similar Messages

Ipad 2 no volume sound after upgrade to ios 8.1

ipad 2 no sound for all the apps after upgrade to ios 8.1
youtube videos playing without sound ... sic
only facetime works...

Make sure ringer is on and volume is up.

Volume N200 after upgrade 1

Yesterday I have upgraded my N200 (BG) to version .20 (european version). Since the upgrade the volume is too loud. Even when I set the volume to /25, it is very loud.
Have someone any suggestions to fix this problem? Thankx!

This is a common cause of complaint on this forum - all firmware after .5.0 had this revised volume scale.
Sorry to say but if you had read a few of the posts in here first you might not have done the upgrade - loads of people have been complaining about it.
PB

Volume lost after upgrading

I've created a directory /Volumes/HD2/ and after the upgrade to Snow Leopard, the complete directory is gone. Has anybody experienced the same?
Is the volume completely gone or is it just not mounted?
Desperate man.

Guys see my thread - https://discussions.apple.com/thread/5493304
For those of you who are using Apogee Duet (Firewire or USB) and just UPDATED to Maverics - DONT INSTALL NEW APOGEE DRIVERS!
The reason is - once you install new driver, software volume control keys (on your keyboard) wont work! You will have to use DUET's knob which is not always confortable.
There is no fix for this yet and maybe wont be, because of Apogee "great" costumer support - (such problems with DUET first appeared in Lion)
If your drivers from Mountain Lion (or older) works fine, dont update it or reinstall it. You will be unable to install previous version in Mavericks.
If you're the one who installed fresh copy of Mavericks from USB Flash, i dont think there is a way to fix the problem. One thing that i didnt try was using Pacifist to force replace driver files.
Hope this message was helpful
Seems like this problem appears not only on Duet, but on al Apogee products.. =(

Iphone 4s volume down after upgrade

after my ios 7.0 upgrade iphone 4s tone volume is down...so down that i am unable to hear someone calling when its outta my pocket...didnt have this problem before. have done the hard reset no improvement. any other solution(s)?

Settings > Sounds > Change with Buttons... Make sure this is set to ON.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

Sound volume problem after upgraded to Lion Mac OS X 10.7? Any help?

I have just upgrade to 10.7 Lion last night. Whenever I change the volume, no matter by pressing the volume up or down button on the keyboard, or using the mouse to change the volume on the top bar, the computer hangs for a while, with no sound, for a few seconds, the youtube video reset or hang, even the Safari hangs for a few seconds.
Anyone has the same problem? Any fix on this?

Another thread suggested this fix see screens
Removal of the following files
~/Library/Preferences/Audio/*.plist
~/Library/Preferences/com.apple.soundpref.plist
This is a possibility for a fix.
Christopher Reynolds, ASQ CRE, PMP, BS IS

Not booting from 10.4.8 volumes after upgrade from 10.4.7

I'm sorry to report that my aged G4 450 MHz AGP with 4 internal Hard disk drives no longer boots from any of the 2 volumes upgraded to Mac OS X 10.4.8 as soon as it was started from another volume!
All was working fine as long as 10.4.7 was installed on the 2 232 GB disks connected to the SIIG ATA133 controller. I could boot from any OS on any of the 4 disks, 5 partitions:
internal ATA66 bus:
18 GB disk, 2 partitions: 'IBM_18GB' with OS 9.2.2 and TechTool Pro's 'eDrive' with 10.4.7
71 GB disk, 1 partition 'IBM_71GB' with OS 9.2.2
PCI SIIG ATA133 controller:
232 GB disk, one partition 'I1232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
232 GB disk, one partition 'I2232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
Now I can only boot from the Mac OS 9.2.2 or the eDrive 10.4.7 partitions.
What I did so far: 'I2232GB' was my main OS X startup volume, 'I1232GB' contains a clone of it, plus additional folders like software base and backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8 through Software Update and repairing permissions all was OK as long as the Mac was just shut down or re-started: it always booted up in Mac OS X 10.4.8 from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same there.
Afterwards I could no longer boot in Mac OS X 10.4.8 from 'I2232GB' nor in in Mac OS X 10.4.8 from 'I1232GB': it just gets to the grey screen with the Apple logo, but the round circle underneath indicating some progress never appears. I left it there for hours: it just hangs.
With the Option key held at startup I could boot from the other partitions with Mac OS 9.2.2 or the eDrive with 10.4.7. None of their Startup Control Panels was able to get me back to 10.2.8!
So I booted from the TechTool Pro 4.5.1 DVD to Optimize both volumes, 'I1232GB' & 'I2232GB', always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to rebuild the directories of both volumes, 'I1232GB' & 'I2232GB'.
Still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Downloaded the Mac OS X 10.2.8 Compo Update (for PPC) and installed it onto both 'I1232GB' & 'I2232GB' while booted from the eDrive which I keep on Mac OS X 10.4.7 - no luck either, still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Then I backed up the users folder from 'I2232GB' onto 'I1232GB', booted from Mac OS 9.2.2 and used Intech's Hard Disk Speedtools 3.6 to format 'I2232GB', afterwards initialized it with Alsoft's Plus Maximizer Extension for a Block Size of 512 Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive '06 and upgraded everything to the latest releases with Software Update. All was working fine with all the required reboots until another startup volume was chosen: afterwards again I can no longer boot back into Mac OS X 10.2.8 on the fresch installed 'I2232GB'!
Any help would be appreciated.
Here is some information found by System Profiler from Mac OS X 10.4.7, eDrive, let me know if you need more:
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XA00715VHSF
Sales Order Number: M7628LL/A
ATA Bus:
IBM-DPTA-372050:
Capacity: 19.12 GB
Model: IBM-DPTA-372050
Volumes:
IBM_18GB:
Capacity: 13.12 GB
Available: 6.96 GB
eDrive:
Capacity: 6 GB
Available: 3.03 GB
IBM-DTLA-307075:
Capacity: 71.59 GB
Model: IBM-DTLA-307075
Volumes:
IBM_71GB:
Capacity: 71.59 GB
Available: 39.65 GB
ATA Bus:
PIONEER DVD-RW DVR-107D:
Model: PIONEER DVD-RW DVR-107D
Firmware Revision: 1.21
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
IOMEGA ZIP 100 ATAPI:
Model: IOMEGA ZIP 100 ATAPI
ACARD,6880M:
Name: ACARD,6880M
Type: scsi
Bus: PCI
Slot: SLOT-C
Vendor ID: 0x1191
Device ID: 0x0009
Subsystem Vendor ID: 0x1191
Subsystem ID: 0x0009
Revision ID: 0x0003
SCSI Parallel Domain 65536:
Initiator Identifier: 7
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
SCSI Target Identifier: 0
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I1232GB:
Capacity: 232.89 GB
Available: 14.1 GB
Writable: Yes
File System: HFS+
BSD Name: disk2s3
Mount Point: /Volumes/I1232GB
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
SCSI Target Identifier: 2
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I2232GB:
Capacity: 232.89 GB
Available: 180.11 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s3
Mount Point: /Volumes/I2232GB
The RAM consists of 4 identical modules and is about 1 year old:
DIMM0/J21 to DIMM3/J24:
Size: 512 MB
Type: SDRAM
Speed: PC133-333
Status: OK
Many thanks for your help!
Josef
Apple G4 AGP Mac OS X (10.4.8) 4 internal hard disks, dual layer DVD-RW, 2GB RAM

What I did so far: 'I2232GB' was my main OS X
startup volume, 'I1232GB' contains a clone of it,
plus additional folders like software base and
backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8
through Software Update and repairing permissions all
was OK as long as the Mac was just shut down or
re-started: it always booted up in Mac OS X 10.4.8
from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same
there.
Afterwards I could no longer boot in Mac OS X 10.4.8
from 'I2232GB' nor in in Mac OS X 10.4.8 from
'I1232GB': it just gets to the grey screen with the
Apple logo, but the round circle underneath
indicating some progress never appears. I left it
there for hours: it just hangs.
With the Option key held at startup I could boot from
the other partitions with Mac OS 9.2.2 or the eDrive
with 10.4.7. None of their Startup Control Panels was
able to get me back to 10.4.8!
So I booted from the TechTool Pro 4.5.1 DVD to
Optimize both volumes, 'I1232GB' & 'I2232GB',
always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to
rebuild the directories of both volumes, 'I1232GB'
& 'I2232GB'.
Still I can not boot from either 'I1232GB' or
'I2232GB' in Mac OS X 10.4.8!
Downloaded the Mac OS X 10.4.8 Compo Update (for PPC)
and installed it onto both 'I1232GB' & 'I2232GB'
while booted from the eDrive which I keep on Mac OS X
10.4.7 - no luck either, still I can not boot from
either 'I1232GB' or 'I2232GB' in Mac OS X
10.4.8!
Then I backed up the users folder from 'I2232GB'
onto 'I1232GB', booted from Mac OS 9.2.2 and used
Intech's Hard Disk Speedtools 3.6 to format
'I2232GB', afterwards initialized it with Alsoft's
Plus Maximizer Extension for a Block Size of 512
Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive
'06 and upgraded everything to the latest releases
with Software Update. All was working fine with all
the required reboots until another startup volume was
chosen: afterwards again I can no longer boot back
into Mac OS X 10.4.8 on the fresch installed
'I2232GB'!
I found several typos in above post, wherever it was 10.2.8 it should have read 10.4.8 - I'm very sorry for confusing you, this would not have made sense, but I found no way to edit the existing text therefore I modified the quote of it here.
I do not need Mac OS X 10.2.8 back, but it would be nice to boot back in Mac OS X 10.4.8 from another volume as the current one - which was working fine before with Mac OS X 10.4.7.
Many thanks,
Josef

Table AUD$ is flooded after upgrade to 11.2.0. - 100 times increase.

Our Production Oracle database is flooded audit messages. The volume of audit information generated increased 100 times! A simple select count(*) from dba_objects generates 20 entries in aud$ table. All VPD related operations are audited. Even select . from dual generates tonns of entries.
Did somebody run into this problem after upgrading to 11.2.0.2 ?
Any thoughts / suggestions would be highly appreciated.

Hello;
Last fall I updated one of our databases to 11.2.0.2 that had a link to an Oracle 10 database.
We had the exact same thing. I ended up doing a rollback.
Searching for my oracle document....
Later
Found this, but its not the one I'm still looking for
AUDIT_SYS_OPERATIONS Set To FALSE Yet Audit Files Are Generated [ID 308066.1]
The other piece of information I have is we were using Patch 9362194. (Solaris patch only)
Seemed to only happen with a link from 11.2.0.2 to Oracle 10.
ORA-07445 When Executing Procedure Over DBLink While Enabling DB Audit [ID 1361130.1]
Best Regards
mseberg
Edited by: mseberg on Dec 1, 2011 7:47 AM
You are right that is an 11.2.0.1, it was from my notes since 11.2.0.1 was giving us a different issue we tried to go to 11.2.0.2. In our case this helped find the cause, but did nothing to settle the debate of what should and should not be in the audit.
select * from DBA_PRIV_AUDIT_OPTS
union all
select * from DBA_STMT_AUDIT_OPTS;Edited by: mseberg on Dec 2, 2011 6:10 PM

After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

I do not think apple will do much to help you under warrenty, as this was caused by a fall. (alas!)
I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself. Can you carefully lever it out of the way? Very very carefully. If it is already broken, there is not much harm you can do by trying.
If it is just the switch being jammed, you might be able to move it out a little. If it is the swith itself, you will need some real service after your three hour drive. You might check your loacl area for a closer service repair source.

Wireless dhcp issue after upgrading WLC to 7.6.100

Hi All,
We have upgraded our controllers to version 7.6.100. After upgrading, the access points also upgraded their version to 15.2(4)JB3. But, the problem is that after this process the APs do not get IP. It stays on this state:
*Sep 26 03:55:36.334: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
The DCHP configuration is OK, since it is working in other two controllers we have and that we are not upgrading untill this issue is solved.
If we connect the APs via console and configure a static IP and controller's IP, the AP registers and works fine. But, the access points are located in 20 remote sites, so we would like to avoid going site by site.
Has anyone suffered this issue and knows how to "recover" those access points?
Thank you very mucho for your help!

Hi,
Thank you for your answer conraddaniel.
But, our issue was an error on the DHCP. The DHCP server pool for the APs was configured with lease time infinite (on a Cisco 6500). After capturing the packets and debugging on the AP we realized that the AP were receiving wrong values:
DHCP: Scan: Renewal time: 2147483647
DHCP: Scan: Rebind time: 536870911
So, on the AP debugging we saw:
DHCP: Scan: Renewal time larger than Rebind time
On Cisco documentation:
T1 Timer(Renewal) After a certain portion of the lease time has expired, you attempt to contact the server that initially granted the lease in order to renew the lease so its IP address can still be used.
T2 Timer(Rebinding) If renewal with the original leasing server fails, because, for example, the server was taken offline, then you ideally try to rebind to any active DHCP server and try to extend its current lease with any server that allows it to do so.
These T1 and T2 timers can be any values, but must be less than the IP address lease duration. T1 Timer must be less than T2. Generally T1 is set to 50 percent of the lease duration and T2 is set to 87.5 percent of the lease duration. Use this rule to set T1 and T2 timers.
On the previous version of the WLC, the DHCP was configured in the same way and we confirmed that the APs received same times, but they ignored those wrong values.
The workaround was to modify the lease time of the DHCP pool (1 day). This way, both timers had valid values and the APs accepted the DHCP OFFER. We still do not know why with lease infinite these timers have wrong values (a bug?).

MDNSResponder taking 100 percent CPU after upgrading to 10.5.1

Hello,
just want to know if anybody else has the same problem.
After upgrading to 10.5.1 the process mDNSResponder took up almost 100 percent of CPU power.
In the system.log following line appears (very often):
mDNSResponder[171]: KQ SSLHandshake failed: -9806
I took a look at my Linux firewall in front of my network and it drops a lot of packages:
REJECT:IN=eth0 OUT=ppp0 SRC=192.168.2.20 DST=17.250.248.161 LEN=64 TOS=0x00 PREC=0x00 TTL=63 ID=47178 DF PROTO=TCP SPT=63684 DPT=5354 WINDOW=65535 RES=0x00 SYN URGP=0
Looking who is 17.250.248.161 turn out:
bash-3.2# dig -x 17.250.248.161
; <<>> DiG 9.4.1-P1 <<>> -x 17.250.248.161
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 7068
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;161.248.250.17.in-addr.arpa. IN PTR
;; ANSWER SECTION:
161.248.250.17.in-addr.arpa. 6000 IN PTR pm-members.mac.com.
;; Query time: 210 msec
;; SERVER: 192.168.2.1#53(192.168.2.1)
;; WHEN: Fri Nov 16 06:45:11 2007
;; MSG SIZE rcvd: 77
Maybe this is a server something to do with .MAC (I'm a member and some sync are turned on)?
I opened the 5354 port and mDNSReponder is now running normal.
But hey Apple, I don't want computers be registered by Bonjour or something else at your servers.
Can you please check this out?
Thanks for your answers.
Andreas

Hi
I think I found the cause to my problem and also solved it?
When I investigated my "Console Log" the next message was repeated :
... mDNSResponder[202] Failed to obtain NAT port mapping from router 10.0.1.1 external address xxx.xxx.xxx.xxx internal port 9999
This gave me an idea and pointed in the NAT configurations.
What have I done (which solved my problem) :
• opened "Airport Utility"
• selected my Airport Base Station
• choose "manual Setup"
• choose "internet connection"
• after that i selected the tab "NAT"
• where I deactivated "Enable NAT port mapping protocol"
• and then I updated my Airport Base station
=> since then, no more the problem and de message disappeared from the "Console Log"
Greetings
Peter

Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
I have a 4th gen ipod touch which until upgrading to 6.1 from 6.0 was working perfectly.
Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird! Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
thanks!

I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
I wonder if there is a broken .plist file that may be fixed ...?

Print out size lost control after upgrade to osx 10.9, cannot print 100% document original size, why?

As subject said.
I'm using Xerox 1450GA, before upgrade to OSX 10.9, printing Adobe file could be in 100% real size. After upgrade, lost control, even checked setting in 100% in setting, come out image still auto reduce few percents, that make me confuse and cannot complete digital printing jobs, someone have same problem? Please help to solve...

I've spent hours on the phone going in circles with HP's "support" (I use the term loosely here) and can confirm that it's a driver issue. The best part is, HP and Apple claim that neither of them have a copy of the v2.14 driver that actually worked, and I can't seem to dig one up online anywhere. I've tried everything under the sun and just gave up... ordering an Epson and selling both of my HP's. I think the only other option is to wait for HP to release working drivers, but since they don't even seem to understand that their driver is the source of the problem, I wouldn't hold my breath.
It seems really crazy to me that neither the manufacturer nor Apple keep a copy of the previous driver, but that's what I've been told. HP did release what they're calling a new 10.9 raster driver (available on their site), but it didn't fix the problem for me. If you have a timemachine backup from before the 2.16.1 driver was released, I'd restore to that and turn off automatic updates. If you don't (like me) seems like your stuck.

I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

I I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

You may refer to the web below for the upgrade steps.
http://event.msi.com/2013/win8-1/Update.html
After you finished the upgrade, try to update your intel/nvidia driver.

Volume 100% after upgrading

Similar Messages

Maybe you are looking for