Volume and Media Quick launch buttons not working Pavilion DV4 1100EA

Hi,
I recently had to replace my hard disk and reinstall windows 7 (32bit) from scratch. I have loaded HP Quick launch driver V6.50.12.1 (2009-12-09, latetest on website) but have the following issues:
Media Quick Launch button does nothing (despite media programs been installed)
Volume slider button does not provide the previous clicking and volume bar on the screen when being used. (I have checked that the sound is enabled in the Bios).
I have uninstalled the Driver and reinstalled it several times, but it does not fix the issue.
Any suggestions would be appreciated.
Regards,
Dave

Hi,
QuickPlay will not work under Windows 7 ( it was the option for Vista ) and was replaced by the MediaSmart software option.
If the media button you refer to has a Q rather than an M, there is an alteration you can make to the registry that will allow you to launch SmartMenu from this button.
The key is located at:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packa​rd\HP Quick Launch Buttons
Modify the path for:
QAction
To:
C:\Program Files\Hewlett-Packard\HP MediaSmart\SmartMenu.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Quick Launch Buttons not working on dv7-3085dx

    Hello HP world.
    I am having a problem that I cant fix it myself and it is driving me crazy.
    I am very techy and usually always find a solution to any problem but this one got both of my feet locked.
    My Quick Launch Buttons on my DV7-3085dx  Running Win7 64-bit.
    Are not working. They were working fine since forever until 2 weeks ago I noticed the mute and wireless buttons remained red non stop? and they were not functionable. Almost as if they lost connection to the notebook.
    This is what i have tried so far:
    - Hard reset (after i did this the red mute button and wireless went off, now only volume and media controls are on, still useless)
    - Updating the QuickLaunch Buttons Driver
    - Updating the BIOS
    - Reinstalling MediaSmart
    - New Chipset Driver
    - Installing latest IDT driver
    - probably other drivers and such which i cant remember but its been over a week that i have been reading online and it came down to this.
    I surrender!
    Please help me.
    Thank you in advance.
    Fitim

    Fitim wrote:
    So i just finished with the System recovery and no luck
    The buttons are still not functioning. I just get the audio and player controls lid up but thats it.
    They dont work and are useless.
    HELP
    If they're not working after performing the System Recovery then it's a hardware problem.  Could a loose or damaged cable or circuit board. 

  • Quick Launch buttons not working on Window 8.1

    I have installed window 8.1 but quick launch buttons, which used to work with combination of FN key, for example fn+F3 key for brightness, fn+F8 for volume, fn+F6 key to lock the computer etc are not working. What is the solution?

    Farhan_Raza
    I have available a pretty extensive list and I cannot find a Quick Launch Driver for Windows 8.1.  Might be one; I don't see it.
    I use a completely different arrangement of Custom Toolbars from what most people use so I am not at all sure what constitutes a Quick Launch.
    I did find the following that may be close to what you seek:
    How to enable Quick Launch in Windows 8.1
    =========================================================================
    Possible Option - HP Launch Box Manager
    Windows 8.1 provides the following -- this program MIGHT install on your computer and it might run on your computer.  It is not rated for your system.  You may try it if you like.  Windows will tell you if the program is not appropriate for your system.
    For Windows 8.1, you might be able to use the HP Launch Box Manager:
    Close running programs, browsers, and games
    Next:
    Create a Restore Point:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Download / Save:
    sp63808 HP Launch Box V1.1.5
    Double Click or Right-Click on the file and install as Admin...
    The application installs in seconds and then disappears.
    Windows key (opens the Start Screen) > type anywhere, the word: Launch Box >
    Click to start the Launch Box Manager
    The Launch Box Manager will start on your Desktop and offer a list of available applications from which you can choose eight applications for your Launch Box menu.
    Once set up, the Launch Box Manager sits in your Task Bar.
    Right-Click to Edit the Manager OR Left Click to Open and access the items in your Application List.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Dv7-1130us - Quick Launch buttons not working - though they light up correctly

    I'm trying to enable wifi, though the quick launch buttons are no longer working. They used to work, though I've had my laptop repaired at the service center (to replace the keyboard), and I also immediately upgraded to windows 7 once my laptop was returned.
    I've done a hard reset, upgraded the bios, and upgraded the quick launch button drivers, though nothing is working. When windows boots, the wifi image on the quick launch bar transitions correctly as it has always done (blue to orange - since I had I usually had it disabled before I sent it in for repair and upgraded).
    Is there a way I can enable the wifi card without having to use the quick launch buttons? The wifi card has always functioned correctly when it was enabled, and it's working properly according to the device manager. I just need to either find a way to enable it without using the quick action bar, or get the quick action bar working.
    Any suggestions? I'd rather not send it back in for repair, it's a lengthy process.
    This question was solved.
    View Solution.

    Uninstall the current HP Wireless Asistant and reboot.
    Try installing newer version of HP Wireless Assistant sp49018.exe
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • [Solved] Quick launch buttons not working

    So I bought the GT60 2OC 3k IPS edition around 3 months ago and it's been working more or less perfectly. However today I haven't been able to use any of the quick launch buttons, they don't even light up when clicked on. I tried reinstalling SCM multiple times but nothing changed. Is there any easy fix solution to this problem?

    I just read about the EC reset and tried it out. It worked! Sorry for the needless thread, although I'd still like to thank the community and moderators of these forums that provide some useful information

  • Reg: Quick Launch buttons on HP pavilion dv4 laoptop

    Hi, I am having HP Pavilion dv4 laptop, today all of a sudden my quick launch buttons are not working. I installed new version of quick launch buttons drivers. But it doesn't worked. The wireless, quick play, audio buttons are not working. 
    While i pressed Fn+F5 , laptop was hibernated, and I activated then  the wireless button turned into blue but there is no internet connection of wireless.
    What would be the problem... ? 
    need help

    Hi,
    Uninstall this version of HP Quick Lunch Buttons which You have installed and try this one here . 
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Hp quick launch buttons on HP Pavilion dv4-1125nr

    Installed Windows 7 Ultimate 64 bit on notebook yesterday (not beta, full release version).  Only issue is incompatibility of the HP Quick Launch Buttons.  Is there an updated version . . . could not find anything on the HP site?

    Hi,
    Uninstall this version of HP Quick Lunch Buttons which You have installed and try this one here . 
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • DV7-1279WM microphone and quick launch buttons stopped working

    For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
    I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
    Any suggestions? Thanks.

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • Quick Launch buttons not fully fuctional

    I have a Pavillion laptop 6930 and I just upgraded to WIndows 7 ultimate 64.  the quick launch buttons are not working properly.  I installed some drivers I thought would make them work fully but was unsuccessful.  The problems are that when I click the Mute quick launch button is that it does not turn orange any more.  In vista the button would turn orange but not in 7.  Even though it still mutes my computer I would like it to turn orange like it use to.  The on screen Displays of the volume slider also does not show up.  The quick launch button lowers and raises the volume but doesn't show on screen display of it. Back in Vista it had a green bar that would show up in the bottom right and move according to your finger on the quick launch button.  Any solutions?

    Hi,
    Try a Hard Reset as follows.
    Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for a full minute.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ITunes and hp quick launch buttons

    I have Windows XP and iTunes 7 on a HP Pavilion Media Center dv6278ea computer.
    When iTunes is the active window, the quick launch buttons work, but not when it is minimized to tray or behind another window.
    Is there a way to make it work like Windows Media Player?

    Hello @luvpatch,
    I understand that you are not able to use the HP Quick Launch buttons after upgrading to Windows 8.1, and I would be happy to assist you in this matter!
    The first step I recommend is to completely remove HP Quick Launch from your system by using this Microsoft Fixit tool: Fix problems that programs cannot be installed or uninstalled. Once the program is removed, please restart your computer.
    To further diagnose Internet Explorer on your system, I recommend following Resolving issues in Internet Explorer (Windows 8), as well as Troubleshooting Wireless Network and Internet (Windows 8). This should help to re-establish a consistent connection between your notebook and wireless network.
    If the issue continues, I recommend performing a backup and refresh back to when Windows 8 was still installed on your system. To do this, I recommend following this resource on Backing Up Your Files (Windows 8), as well as Refresh Your PC to Resolve Problems (Windows 8).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Quick Launch Panel Not Working on GT70 2PC

    I have had the notebook for a week.  The quick launch panel worked out of the box but after the machine ran through all of its updates it has not worked since.
    I read the older posts on this problem related to updating BIOS and EC as wall as the restart following pulling the battery out to initiate a reflash of the EC but have not had any success.  I have ran the latest version of MSI Live Update 6 and installed all the recommended updates.  Here is the latest state of the notebook.
    BIOS E1763IMS.517
    EC 1763EMS1.716
    SCM 13.014.06109
    Steel Series Engine driver 3.0.3.8
    I would appreciate any help.

    Hello Glenn,
    The EC version difference between my sample and your laptop is on the controller of the quick launch panel. There seems two types of controllers used in the laptop. So maybe the Live Update you installed mistakenly overwrite your original EC from 516 to 716 and made you unable to use the quick launch panel.
    All you need to do now is to manually flash the 516 version of EC.
    As shown in the picture, there're two versions:
    516: Execute the Autoflash.exe in the "352x" folder. (Need to run as Administrator too.)
    716: Execute the Autoflash.exe in the "353x" folder. (Need to run as Administrator too.)
    Since you are using 716 now and the quick launch panel didn't work, it probably works after you flash the 516.
    You can execute the Autoflash in the "352x" folder to try it. 

  • QUICK PLAY BUTTONS NOT WORKING

    My DV6000 series laptop quick launch buttons are lit up but they don't work.
    Any ideas please

    Hi,
    Write down Your p/n number which is under Your computer and looks like this.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Dv6-1240us quick launch buttons stopped working

    Hi,
        I have dv6-1240us notebook pc. After installing some of the updates quick lauch buttons stopped working on my notebook.  Nothing happens when I touch the volume control/mute button.
    Does anyone has idea how to resolve this problem.
    Thanks in advance.
    Nandkishor

    Same thing with my dv6, just the audio button.. wireless is ok. chatted with HP they said hard-reset it, update the driver, update bios. nothing worked.

  • Faulty Quick Launch Buttons on my Pavilion dv9854ca notebook...

    I recently had to reformat my laptop after the hard disk failed to boot properly, and I had to reinstall Windows, and all the drivers and software I used before.  I installed the HP Quick Launch Buttons driver, and so far all of them (Play/Pause, Stop, Volume etc...I didn't install Quickplay because I don't need it) have been working properly except for the "mute" button, something I just noticed.  Every time I tap it, it will toggle to the other setting for a millisecond then switch back to what it was before, i.e. if there is sound, and I want to mute sound, I tap the button, and it will flash orange (signalling mute) for a brief moment before going back to blue (signalling sound), and vice versa.  Before I reformatted, if I wanted to mute or unmute, I tapped it and it would toggle to the other setting without switching back.
    Has anyone ever experienced this problem or know how to deal with it? It's nothing major but is a bit of a pain to have to click the windows volume settings...
    Thanks!

    You need to install sound driver to fix the mute issue.
    Which OS are you using? if it is vista you can find it here
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Laptop touchpad and switch cover LCE button not working

    My laptopm is Pvailion dv 6748us. My Motherboard died and replaced with same model HP motherboard.
    The first time I log in after motherboard is replaced, an error message about touchpad pop up (i did not have a chance to write down the message) and touchpad stop working.  The LCD buttons on switch cover (volume, media buttons, quick play etc) does not work either but the lights do light up. 
    Any help and guide is greatly appreciated.

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    If it's a European model, you could check the Toshiba Europe forums.
    - Peter

Maybe you are looking for

  • Assigning value to picture in picture ring control

    Hi, i made a picture ring that contains 23 images. I'm measuring a real-time signal and want to assign (for example) picture 1 to measured-voltage-value of 0.5 V, picture 2 to 1 V, picture 3 to 1.5 Volts, etc. How do i do this? Greetings

  • Product Costing with Moving Average Price

    Dear Experts, Please guide me solution of my below scenario : - FG Material (500013) Process Order Created of 1000 units at 1st August. - FG Material (500013) Process Order confirmed and GR posted at 3rd of August. - All stock of FG Material  (500013

  • Only the last line item is shown in main window...

    Hello Experts, I created a custom form for the standard checque program RFFOUS_C. Now, in my MAIN window, I called a subroutine in a custom program which loops through the line items but the problem is only the last line item is being shown. I tried

  • How do i get the music that's on my ipod to my itunes?

    How do I get the music that's on my ipod onto my itunes? I had to reformat and lost all the music in my itunes. Please help!

  • Difference between material(/SAPAPO/MAT1) & material(/SCWM/MAT1)

    Hi Experts, I am new to EWM  & I am confuse between Product(/SAPAPO/MAT1) & Product(/SCWM/MAT1) ?. Please anyone outline me some brief about above to product in EWM. Regards, Rock