Volume Automation Not Working In Logic

So, I have been doing some audio work with about 12 different tracks or so and at certain points, I need to use automation to completely lower the volume at certain points to infinity. Yet whenever I listen to the track, on some tracks, the volume automation will either ignore those points when it's supposed to go down to -infinity, and stay at 0 dB. Or conversely, sometimes it will go down to -infinity and stay at that point when it's supposed to go back up to 0 dB.
Does anyone know what's causing this or what could stop it? I'm using Logic Pro 8. Thanks!

I'm having the same problem. (Sorta) Automation was working and now it's not. READ is on.

Similar Messages

My volume is not working when on the ringer what do I do

My iPhone volume is not working when I have the volume set on. It will work with the headphones but other then that nothing. What's going on with it?

supposedly from what I have read it is a software issue. I actually am also having this problem it worked after I performed a full reset, but now it has started again tomorrow I am going to the apple store to find out what I can do as I bought my 4s right before the 5 was released.

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Volume is not working properly

Volume is not working. When listen to music. Can't even see on the screen the button to control the volume

Have you tried http://support.apple.com/kb/HT4085
Sometimes it happens. If not try a reset. Hold down POWER + HOME for 10 sec until the logo appears.

Volume button not working

Hi,
i have recently purchased a nokia lumia 620 and since yesterday suddenly the volume button to increase the volume is not working
what can be done here ?
please let me know in case of any clarifications.
thanking you,
regards
Arpita

Is it the same if you try without the Back cover ? If it works fine without it then put the cover back properly and check again..
Else, you may try a soft reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds).

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

My volume key not working volume increase automatically, how to mute all audio

my volume key not working, volume increase automatically if i go to audio settings i can adjust, but again volume increase automatically , how to mute all audio

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
iPhone - Contact Support - Apple Support

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

Late 2009 imac 27, bluetooth keyboard pressing fn f11 volume down not working and automattically go to mute

Hi all,
having problem last few days with my late 2009 imac 27, my wireless keyboard volume down not working when i pressing, up is working (f12). but when i press down (f11) after few pressing it will go all the way to mute.
but the stranged is after awile ( if i have pressed up) it will go down all the way to mute as i didn't press anything. and if i leave it for awile my mute icon still show it on display and will not turn on my screensaver / sleepmode.
have osx 10.8.3 newest version. mountain lion.
please help.

i had the same problem like you did
i wanna ask you something.How can i dod reset PRAM?
Because when i restart my imac,the keyboard is shutting down.then it takes a time to reconnect again to imac.
that time the screen appear in log in view
help me out please

Just updated I-Phone 4 and volume will not work

Just updated I-Phone 4 to OS6 now my volume will not work.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* http://kb.mozillazine.org/Lost_bookmarks

My nephew's iPad volume will not work? Any clue why?

My nephew was messing with the "find my ipad" service, ended up erasing everything. i backed it up and now the volume will not work, not with the side button or even give it as an option on the music. I've checked the volume setting, the speaker work fine. I checked if he muted it some how but i can't figure out why sound won't play.

You backup but do you backup with iTunes? If you do and you have an older backup... One that existed before you erased the device.... You can try restoring from that backup. Restoring from a backup restores the previous app preferences and settings to the iPad. If you decide to try this, turn off auto sync first so that you don't inadvertently overwrite the backup.
Launch iTunes on your computer and go to Edit>Preferences>Devices, check the box at the bottom that says "Prevent iPods, iPhones and iPads from syncing automatically. You can also check in that window to see if you have any backups that predate the problem - the wiping of the iPad. if you do have a backup - Click OK. Quit iTunes.
Connect the iPad to your computer with the cable and launch iTunes, right click on the iPad name under devices and select Restore From Backup. Select that backup from the menu (in case you have additional or multiple backups) and restore from it. Sync with iTunes after you restore from the backup.

Ipad mini water damage and now my volume does not work!

Phone was in purse where I accidentally put a water(which I thought was closed tightly) and now my volume does not work!

Water is generally fatal for iPads. You might take it to your Authorized Apple Service Center and see what they can do for you.
Prepare to replace your iPad.

HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

Automation not working in multi output stereo?

I changed my stereo outputs into multi output stereo and noticed that the volume automation is not being read any more. All the volume levels are still moving up and down but the sound itself stays at the same level. I tried out what would happen if I set them back to normal stereo and yes, the automation works again. Why is this?

Have you tried opening the file in your browser to see if the bookmarks are working? To open the file in your browser you need to do this:
1) Launch your favorite browser;
2) File >> Open >> Select your pdf file
See this picture to see what I am talking about. You might need to click on it to magnify it:
Good luck.

Key volume button not working

Recently installed SSD and now my volume keys are not working. In/outputs seem to be fine. Any ideas

Some of these issues will be resolved by power cycling the Notebook.
1. Shutdown the notebook.
2. Remove the AC INput.
3. Remove teh battery.
4. After one minute, reinsert the battery.
5. POwer on.
Most probably your issue will be resolved, because your keys and indicators are working properly and only the input keys logic is hung somewhere.

Volume Automation Not Working In Logic

Similar Messages

Maybe you are looking for