Volume bar appears in opening screen and time is in double vision
On opening my iPhone there is what appears to be a volume bar toward the top and the time is displayed over a different time in the background. Any suggetions?
You've most likely taken a screen shot of the lock screen and assigned it to your wallpaper. Change your wallpaper and it will go away... Settings > Wallpaper
See p. 105 of the manual for how you took the screen shot... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Similar Messages
-
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
A black bar appeared on my screen today and it repeats everything i do. It also underlines everything it says on the page. How do i get rid of it? It is driving me crazy!!
Hi, by Repeat, do you mean speaks it?
If so try CMD+F5 to turn off Voice Over. -
I pulled my launchpad icon formt he dock bar to the main screen and a little pop sound and a little puff of smoke appeared on the screedn and it dissappeared. I want to bring back the launchpad to the dock bar. Where did it go and how do I get it back on my screen?
1. It's gone. Shortcuts like it disappear without confirmation when dragged out.
2. Choose Applications from the Finder's Go menu and drag it back.
(85989) -
My 2nd generation ipod touch won't get off the 'slide to open' screen and won't let me slide to open. It shows the lock symbol at the top. This is my first time to have one so I'm a little lost... Is it fried or is there a trick to unlock and get it open? Yes, I'm an idiot when it comes to this stuff and I have no manuel to read and learn from. Someone please help!!!!
- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Then try restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults. -
A permanent horizontal line has appeared on my screen and will not go away. How do I get rid of it?
A permanent horizontal line has appeared on my screen and I cannot seem to get rid of it. Any suggestions?
You have the technicians at an Apple store genius bar examine your MBA and determine the cause and possible remedy. Make an appointment.
Ciao.
It is probably a GPU or display issue.
Message was edited by: OGELTHORPE -
Ghost volume icon appearing randomly on screen
I have a volume icon that appears on my screen, and much like a ghost in the night, it upsets things..primarily it messes with my mouse to the point where it moves slowly and has difficulty going where I want it to go. When I shut down, it goes away for a while, but then reappears.
It sounds like you have some sort of Backup software that mounts an external drive or network drive periodically.
Generally Macs become less responsive during backups -- and that might explain the jerky mouse movement. -
I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. It doesn't happen all the time but is very annoying. Any ideas?
Reset the SMC and PRAM, if the issue continues then you likely have a failing GPU (hardware) that requires repair. To be sure take it in and have it professionally assessed.
Intel iMac SMC and PRAM resets -
The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?
rodrocket wrote:
... What can I do?
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Beachball when opening "Date and Time"...? System Freeze..?
I want to know if there is anyone out there with a similar issue-
When I *right click* on the Time (top right on Menu bar) and then *click on "Open Date and TIme"*, I get the beachball......it typically waits in beachball mode for about *45 sec-1min* before actually displaying the "*Date and Time"* window.
I was on the phone with Apple care about this *and the issue with the system freezing*.......they asked me to archive and re-install , but the issue with the date and time is still there. I will wait and see if the system freeze has been solved (I didnt install version 1.1).
Like the folks in other threads have already pointed out, my system freezes when it comes back from "Sleep".......and also when I am doing doing simple things like browsing.
Lets see....but please let me know if anyone sees the issue with the date/time...
Thanks,
New Mac Convert (a little frustrated that it crashes worse than my windows box)Thanks for the replies guys...
Yes, the date/time is set to auto and the source is "Apple Americas/US (time.apple.com)"
One thing I noticed is that whenever it hangs for 45 sec or so.....once the window shows up (after hanging), the lock for changes is "open".....but if I lock it at that point, close the window and then rt click on time and open Date/Time again, it does not hang......somehow when this is "locked", it does not hang when you want to open it.
But, if u are in the lock mode, and want to "click the lock" to make changes, it hangs on you again......hope this makes sense. -
I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
i keep getting the incoming messagrs bar appearing under mail activity and all my old emails start to fill my inbox.Why and how do i stop this and how do i permanently delete old e mails?
Maybe this will help:
https://discussions.apple.com/message/21026706#21026706 -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
Maybe you are looking for
-
HT5191 i can't update iTunes 10.6.1
i can't update iTunes. i got this message: The file "iTunesXPatch.pkg" couldn't be found on the server "swcdn.apple.com". what should i do?
-
What do I do with the bonjour service issue? I have read blog after blog and nothing works. Please help.
-
Content Type policy template - labels
Hello, I have create "Content Type policy template" . I enable "Labels" policy. When I press "Ok" , show the following error : "The label reference, ProjectName, could not be found" So What is wrong ? Thanks ASk
-
Searching a Binary Non-Search Tree
I'm working on a project where a binary search tree was created (sorted on employee last name). However, now the task is to find an employee based on employee ID (not last name) ... so the "search" part of the binary search tree is useless. Instead,
-
I have a question on AD user search. In AD, I have created OU and under OU, again created two sub OU's for Users and groups. I have 10000 users If I want to search for 500 users, How do I achieve it? Where do we specify mutliple OU? Under User Base D