Volume bar (hotkeys, KDE)

Hello,
Is it possible to configure Arch (KDE) to display a nice bar with volume when I press my volume up, down hotkeys (the hotkeys are configured with acerhk module and codes added with xmodmap, KDE now recognise them). I remember I had something like this under ubuntu, but I don't know if it was a part of kde or something 'ubuntu specific'.
mazu

this script inc./dec (alsa) volume via amixer and shows a volume-bar via xosd (osd_cat).
#!/bin/bash
case $1 in
+)
amixer set PCM 2dB+
amixer set PCM 2dB-
exit
esac
VOLUME=`amixer get PCM | sed -ne '/Front Left/s/.*\[\(.*\)%\].*/\1/p'`
osd_cat --font -*-terminus-*-*-*-*-*-*-*-*-*-*-*-* --colour=Green --shadow 1 \
--pos bottom --align center --offset 80 --delay=1 -b percentage -P $VOLUME -T Volume
I use xbindkeys to run the script if I press  the vol. up or down keys on my keyboard.
This is the part for the volume keys of my .xbindkeysrc file (I saved the script as volume-xosd)
# PCM Volume up (Fn + up_arrow)
"/usr/local/bin/volume-xosd +"
c:176 + m:0x0
# PCM Volume down (Fn + down_arrow)
"/usr/local/bin/volume-xosd -"
c:174 + m:0x0

Similar Messages

  • Laptops do not display On Screen Display volume bar after Hotkeys Features Integration update

    Hi,
    I have also included most of the following information in response to a post, on the same subject, for T series machines.
    I have 2 machines that are also affected by this problem, an R61 (8932-CTO XP-Pro-SP3 32-bit) and an R500 (2714-CTO XP-Pro-SP3 32-bit).
    System update recently presented me with Hotkeys version 3.87.0000 on both of these machines, and I let System Update update the drivers in the vain hope that Lenovo had fixed this problem that has been previously reported as affecting many other series and models.
    No such luck.
    The only difference that I would like to  report is that, for me, the last version of the Hotkey Features Integration package that displays the volume bar on my Windows XP machines is: 3.84.5000. I have all versions of the Hotkeys drivers saved on my machine and was therefore able to try them all out to verify which one was the last one that worked for me.
    On both of the above mentioned systems, the version of Access Connections that is running is version 5.97.
    On the R61, the version of Power Manager that is running is version 5.20.
    On the R500, the version of Power Manager that is running is version 5.13. (System Update does not show version 5.20 as an available update on this machine.)
    It would be really nice if Lenovo could finally fix this problem. 
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

    try to reinstall the OSD software. Uninstall the current OSD software that you have, and download the latest version from below.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS000949
    Edit note: Wrong link. See below for the correct link.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • T520 Volume bar

    I have been searching and have not yet found a solution to this problem.  Whenver I do anything that involves audio, the black volume bar appears at the middle-bottom of my screen, indicating what level my volume is set at.  It is not a Windows notification, it is from Lenovo.  Is there any way to permenantly disable this notification?  I have temporarily fixed this issue by disabling all my audio devices but I shouldn't have to do that.
    I'm trying to get work done, but the popup is infuriating.  Any assitance would be of great help!
    Thanks in advance.

    ExJamJus wrote:
    Uninstall the Lenovo On Screen Display application. Should be tied together with the Hotkey package.
    Which will also disable all the Fn+Fkey shortcuts, one of which is needed to turn wireless/bluetooth on/off. Much easier to just disable the on-screen display. Instructions are in the linked post.
    http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-disable-the-annoying-Volume-in-Th...

  • Sometimes the volume bar doesn't show up on the ipad

    Hello,
    I was wondering if anyone could help me with a problem I am having. One day out of the blue the sound on my wife's iPad stoped working for music or videos. The speakers still worked for ringers but not anything else, so I know that the speakers still work. Also I have noticed that the sound only works for the videos and music when you plug in headphones. Also for some reason if you go to raise or lower the volume the volume bar isn't present, I can't do anything with sound aside from hear my ringer. So I wanted to know if anyone knew what was wrong with it. I am thinking there might be a short because sometimes it will work again but only for about 3 seconds and then it doesn't work any more.
    Also please don't give me the link of trouble shooting steps because I have already done them all, and I have also reset the iPad back to the original factory settings and nothing fixed the problem. I even went as far as going to geek squad since I had free tech support from them for the moment and they just told me that according to all the test/trouble shooting procedure that there is nothing wrong with the iPad hardware or software wise and since the speaker works with the ringer, it is obviously working. However for some reason it does not work with videos, music, or anything else for that matter without the headphones being plugged in.
    If anyone has experience this problem please tell me what you had to do to get it fixed, and if repair was necessary how much did it cost?
    P.S. I am sure that the mute is not on.

    It is likely that you need a change a setting on your email server. See here -
    http://support.tigertech.net/outlook-2007-lmos
    http://email.about.com/od/outlookexpressbackuphelp/qt/et_server_copy.htm

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • IPod Touch 3.1.3 1G no volume bar.

    does anyone has this problem? i plugged in earpiece, reset everything,restore to factory setting,tried everything but still there is no volume bar appearing! There is a very very soft volume but its really depressing you can't adjust the volume!

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

  • Ipod Touch Version 3.1.3 volume bar disappeared and will not return

    The volume bar on my 1st generation iOS 3.1.3 ipod touch started disappearing then would return with tweeking of the headphones and sometimes when resetting all settings. Now it is gone completely and won't come back.
    I have tried resetting to factory settings.
    Cleaning the jack with a clean dry toothbrush.
    Any ideas???
    I thought I would try getting help here before going to the apple store.

    From your description it appears that the headphone jack is bad. You can make an appointment at the Genius Bar of an Apple store to hear what they have to say.
    If Apple can't clean out the jack, they will exchange it for this price.
    Apple - Support - iPod - Repair pricing
    Likely not worth it for a 1G iPod. Thee a thrid-party place that is less expensive.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions.  Where is the setting for app sound?  I have gone to the multitask screen and the volume bar is empty.

    I recently found my phone outside in light rain (it had been there about 20 minutes).  It had some glitches at first, however after letting it rest overnight it seemed to mostly recover.  The one problem I am having is that I no longer have sound for any of my applications.  I do have sound for phone fuctions, and I am able to use the speaker for phone functions. 
    When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds.  I am able to make a video and it will record sound just fine.
    When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference. 
    Is there a setting I am missing, or am I just SOL?  I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

    Hi Baileyfour,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    There are two places where vibrations can be set.
    One is the Settings > Sounds
    The other area is Settings > Notifications
    If you have an app set to Alert, it may have a vibration set for it.
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I hope this information helps ....
    Have a great day!
    - Judy

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • How do I get my volume bar back on iPhone 4?

    My volume bar is missing from my iPhone 4 and this seems to be the reason the audio won't work when I try to play music. However, when I play a ringtone the audio is fine. I put my iPhone in the Bose speaker dock and the volume bar comes back, but only temporarily. I've already tried restoring it and it didn't fix the problem. Help?

    Just came home to find I have the same problem!! iPhone 4S, never jail broken,dropped or spilled anything on it! I have been using my original iPhone charger (when they came out with the new iPhone I just shaved my charging/docking station to fit) so it is a little on the dirty side!
    This is the first post I read so I did the headphone thing, the docking undocking thing, restarted it and messed with all the volume setting and neither of them worked.
    So finally taking "mike iPhone guys" post, I looked @ the 32 pin port at the bottem of the iPhone and I reminded me of a old Nintendo cartridge do untreated it as so.
    *** THIS IS HOW I FIXED THIS ISSUE, I DO NOT RECOMMEND IT BEFORE CONSULTING APPLE, YOU MIGHT DAMAGE YOUR DEVICE*********
    These are the exact steps I took ....
    1. I blew into the port and it did absolutely nothing!
    2. I took a vacuum ($200 Hoover windtunnel t series P.A.W.S pet approved vacuum, so it has some power behind it, not the most expensive but not the cheapest either) and used the smallest accessory, the long connection hose/tube with the smaller rectangle attachment and sucked the air out of the port.
    This worked for 5 secs my volume bar appeard and then disappeared again.
    3. I took a very thin butter knife, wrapped it with a paper towel that I sprayed windex with and stuck it in gently one both sides, tested and still didn't work.
    4. Repeated the previous step but added a little pressure and shoved the blade in the upper part only closest to the screen, not the bottem side the knife didn't want to go in as easy so I didn't try, alot of dirt was on the rag, then I used a dry part of the towel and did the same again until there was no dirt on it!
    Tested and still didn't work!
    5. Blow in it once more, and vacuumed it once more but this time putting my finger in the area that the vacuum didn't reach on both ends an lightly tapping it, WORKS FINE NOW! Just needed some
    Cleaning. I can only assume the dirt does make it
    Think that it's still docked.

  • My volume bar isn't working,how do I fix it ?

    How do I get a volume bar to work again?

    Thanks for following up
    Actually, I think my back up/sync is working.  However I still see the sync/back up icon on some of my online albums in the right side of the organizer screen.
    I can't figure out why some online albums have the icon and some don't.  I've right clicked on each and choose "share" yet the albums situation stays the same with the same albums as before displaying the sync/back up icon.
    I purchased an additional online storage, but after adding more photos and video, the amount of storage used hasn't increased.
    Am I going crazy???
    Thanks
    Dave

  • After updating my iPhone 4S to iOS 7.0.6 my iPhone won't play sound. When I pull up on the screen where it shows volume bar, brightness bar, etc. The volume bar does not show up. Even muting and unmuting it didn't work. I reset my settings and nothing

    No sound plays. Muting and unmuting doesn't work. Volume bar doesn't show up. Tried resetting my settings but nothin happened. Please help

    Hello, lrc2. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend taking a look at.  Try all of the steps in this article and if you are still experiencing the issue, see step 9.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • Image zone/Volume bar

    HP Desktop M7240UK
    Windows 7
    Hi
    I recently upgraded to Windows 7 from XP and I have lost the HP Image zone,how can I reinstall it?.
    Also on my keyboard I have volume controls which when pressed would bring up a green volume bar on the monitor, this has also vanished and it was very handy.
    Please can you help me retrieve these valuable items.
    Regards

    York, I don't believe that you will be able to reinstall HP Image Zone software.  There is no way to install individual programs from the Recovery Discs.  As for the volume bar, this is a special app.  I have the same problem with my Logitech keyboard after installing Win7 Pro.  So far I haven't found the solution for this either.  I believe the Logitech software is not compatible with Win7.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Dv5-1124ca volume bar not working

    I've had my laptop for just over a month now, and every thing is fine minus the volume bar. Ever so oftent it will do something annoying like the display well stay up and it will continue to click and stuff, but that goes away when i press stop. Anyways now Im having another problem with the volume bar, when ever i try and use it it doesnt really adjust anything. Its acting kind of like a spring, it will go up a few levels then go right back to where it was. I've tryed reinstalling quick launch and quick touch, updating them, and even the recovery manager and dont know what else to try. Anyone have any suggestions?
    Message Edited by syst3m on 02-09-2009 09:51 PM

    This usualy happens when the quicktouch driver doesn't interact properly with the audio driver. Reinstalling both will almost always resolve this issue.
     Click on start, in the start search bar directly above, type REC. This will give you the option to open Recovery Manager. In recovery manager, select advanced options. Select hardware driver reinstallation. Click Next, then Next agian. In the list of avalibale driver, select your Quicklaunch (or quick touch) drivers and reinstall them. Then select and reinstall your audio driver. This SHOULD resolve your issue. If it doesn't you might try going online and looking for an updated version of both.
    -Good Luck

  • Volume Bar Lag

    Hi,
    I've recently encountered a problem with the volume bar displayed on my screen.
    There is a slight stutter/lag/delay between pressing the button on the keyboard and the volume bar changing its bars.
    This small lag builds up as i repeatedly press the button and the volume bar on screen just freezes so I have to wait a bit for it to catch up.
    The only temporary fix I seem to have is holding shift before pressing the volume buttons, but this silences the feedback sound.
    Is there a permanent fix to this?
    MacBook Air 13'
    1.7GHz Core i7
    8GB Ram
    256GB SSD
    OSX 10.9.2

    I'm having the same problem. Don't know when it started. I'm running itunes 11.0.4(4) on Lion 10.7.5.

Maybe you are looking for

  • A blast from the past- "encountered an error and needs to close"

    hey guys and gals, i really need help. i've been trying to fix my iTunes software for months now. Without further ado, here's what happened: installed itunes deleted quicktime accidently installed quicktime installed itunes itunes still doesn't work

  • How do I remove an obsolete e-mail address of a friend (not a whole account)

    People change their provider and get a new e-mail address. From some people I have 3 addresses but 2 are obsolete. I can't remember which ones. So I want to remove the old addresses, not a whole e-mail account. If I send a new e-mail to a friend and

  • How do I restore my iTunes Library to an earlier time?

    I accidentally deleted one of my favourite playlists that I modified occasionally in a span of 3 years.. (because I was cleaning my keyboard) Because of this, not only did I lose 3 years of fixing a perfect playlist, but in an attempt to fix this, it

  • Some problems with snmp catalyst monitoring (sensor values)

    Good day for all. Recently in our company was installed some snmp monitoring tool, so now I try to configure it to collect some OID's information. Now i have some bewilderment on some OIS's values: 1. cswSwitchPowerBudget that's OID is ​1.3.6.1.4.1.9

  • Admin Server password not working

    Running Netscape Directory Server 4.1 on Solaris 9. I see this: [root@arthur]> ldapsearch -D "cn=Directory Manager" -w ******** -b o=netscaperoot "cn=admin-serv-arthur" passwordexpirationtime cn=admin-serv-arthur, cn=Netscape Administration Server, c