Volume bars and sound slider disappeared?

When I press the volume keys the thingy pops up like normal but the bars on the thingy are gone and it won't let me listen to music and it won't let any sound come out and I really need my alarms? I already reset it and I don't know what else to do. I can't watch videos either because the slider underneath the video that adjusts the sound is gone? It's so weird I don't even know

You can try a hard reset as a first option, but this is most likely a hardware issue. See here:
http://www.ifixit.com/Answers/View/68836/Volume+bar+has+disappeared+-+No+sound+i n+apps
https://discussions.apple.com/thread/3672166
Turn your iOS device off and on (restart) and reset - Support - Apple

Similar Messages

  • Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

    Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

    Not sure why that was unchecked but good to know!
    Apple's new default (since at least a couple of OS releases back) is to have it off so OS X matches the behavior of an iPhone or iPad.
    I almost never need a scroll bar, and when I do, I just move over to the edge of the window when scrolling and a larger scroll bar appears.
    Yes, for the most part, users don't really need the scroll bar. That's what the scroll wheel on almost all mice is for. Saves the trip over to bar to physically grab and move it. But, I do like it on all the time regardless. That way (especially with a long article) I can just take a quick glance over to the bar to see about where I am on the page (a third of the way down? halfway?). Otherwise, I have to move the page just to make it appear to give me the same information.

  • Volume bar and progression bar WILL NOT display durring music

    For some odd reason when I turn music on all I get is five little dots, and they don't even fill up or empty as I turn the wheel.
    I can turn volume up and fastforward music and such, but it won't display either bars. Only these five circles. I've had my iPod for a few months and never had such a problem.
    Any suggestions?

    Sometimes, if you don't allow the screen to refresh before pressing another button, it gets stuck.
    See this for help.
    iPod "stuck" on the artwork or rating screen.
    As you will see, updating the software can cure this.

  • Burning a slideshow to disc and sound slider

    I have made a slide show with narration and music.  Using Photorshop 10 Organizer.
    1.   The sound slider has no effect.    The music does not dip when there is narration on a slide.   Can this be solved?
    2.   I cannot burn the slideshow.   Trying in Photoshop (trying a CD as well as DVD) it will not burn.   The CD seemed to burn, but there was nothing on the disc when it said it was completed.    Trying on the DVD it put me into Premiere Elements 10.   It showed the soundtrack but not the pictures.   During the burn the disc came out before burning had finished.   Another time it completed the burn but there was nothing on the disc.  sometimes the unknown error 2131042560 was quoted.
    Please can anyone help?

    It sounds like you might be using Photoshop Elements, not Photoshop. Is this the case? If so, I can redirect your question to the appropriate forum.

  • While playing songs in iPOD, Volume bar and Song time bar does not appear !

    Hi ...
    I bought a new 30G iPOD and have added nearly 500 songs. It worked fine for 2 weeks. But now it is experiencing an issue while playing songs - It does not show volume bar as well as Song time bar. But I checked the same for videos, it is working perfect.
    Kindly help me resolve this issue ...
    Thanks & Regards,
    SANUP

    Sometimes, if you don't allow the screen to refresh before pressing another button, it gets stuck.
    See this for help.
    iPod "stuck" on the artwork or rating screen.
    As you will see, updating the software can cure this.

  • Desktop suddenly darkens and menu bar and desktop icons disappear

    Hi guys,
    Some times (not very often) suddenly the desktop darkens, and the menu  bar and the disktop icons disappear, while the dock remains. I have to  click in order to return!
    What causes this thing?
    P.S. Before awhile, that this happened again, I looked at the console and saw these two events:
    1)**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend  -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x3000 ****
    2)setPresentationOptions called with NSApplicationPresentationFullScreen  when there is no visible fullscreen window; this call will be ignored.
    But I cannot specify the exact time it happened, in order to see if any of those two messages are related.

    Thank you Niel!! Re the problem with the display being too big to fit the screen.  I had exactly the same problem as geraintfromswansea and was completely stymied. Never even thought of Universal Access being at fault. Must have hit the keyboard command somehow to turn on magnification.  Fixed now thanks to you.
    Rod

  • My address bar and panels have disappeared

    My address bar and settings panel's have disappeared

    In Firefox 3.6 and later on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
    Press F10 or press and hold the Alt key down to bring up the menu bar temporarily.
    Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

  • IPhone 4S No volume bar and...?

    Recently my iPhone 4S has been temperamental. Sometimes, when I try to change the volume, no bar is there. No sounds works on the device. And when I turn off the device to give it a break, it turns right back on. Upon further investigation across the Internet, I discovered it was damage to the charging port that caused this. So I checked the moisture detectors in my phone, and the headphones one was white, but low and behold the charging port one was pink. The only problem is... I never had my phone near water. One time I accidentally left my device in the pocket of my shorts which were taken off in the bathroom while I took a shower. Was the steam from that shower enough to cause this much damage? I guess it is but do you think apple will still cover this under the 1 Year Warranty? I know of someone who had issues caused by leaving their phone in the bathroom during a shower but they got a phone replacement. I guess it just depends on your apple store? Any tips on how to fix this easily? I cleaned the port out with a brush.

    No. But take it to Apple first. If they reject you then clean it very well with Isopropyl Alcohol. If still problem consider Replacement iPhone for $199 with Apple. Repair part is charging port with attached flex cable and lower mic, about $5 part.

  • Poblem in the volume Buton and sound

    hi , i have a problem with my iPhone 4'S sometimes i c'ant listen to music or games but if i have a call he running normaly and if i turn off my phone he turn on automaticly  plz a solution and thanks

    A few weeks ago I started to experience audio problems iphone 4S I have no sound bar, it happens that when you connect the phone to a base audio no problem, but after disconnecting sound runs out, I tried everything, reset, connect, clean the bottom inlet, disconnect cable, but in the end I still have no sound when I connect only becomes a base audio or headphones ... someone has experienced this problem and have any solutions?

  • Tilting, Volume Buttons and Sound Effects icon problem.

    Every time I tilt my iPad while using it on a flat surface the volume button is contacted and the Sound Effects icon appears.  This is a very poor design in my opinion.  It drives me crazy!!  Any workarounds?

        knothead997cdp - I know that with the iPhone, they say there is an app for everything, but causing you headaches isn't one of them! Judging from the multiple issues you are describing, the master reset is definitely the best course of action to take. You may always stop by at your closest Apple Store for a second opinion. In all honesty, it just sounds like the update went corrupt somewhere. Starting clean should take care of it!
    Let us know how it goes. If you have any additional questions, please do not hesitate to reach out to us!
    Thank you knothead997cdp, take care!
    NicandroN_VZW
    Follow us on Twitter @vzwsupport

  • LabVIEW 8.5.1 executable opens on the task bar and then immediately disappears.

    I have been using LabVIEW 8.5.1 for some time now and built several executables but now I have 2 executables that do not work on machines that I needed to install LabVIEW Runtime 8.5.1.
    I installed the executable (which works fine on my development machine) on another computer.  It wouldn't run because I didn't have LabVIEW Runtime 8.5.1.  So I then installed LabVIEW Runtime 8.5.1, but I don't see it in the installed programs.  I now try running my executable again and it does open momentarily (I can see it in the task bar) but then it immediately closes.
    I have since tried thsi with a completely different executable on a completely different machine that also needed LabVIEW Runtime 8.5.1 and teh same thing happens.
    Any thoughts on why this is happening?

    I don't know why it works by installing the device drivers but it does.  It doesn't make sense to me either.  It worked on 2 different executables which basically both read file, use graphs, do some simple math calculations and write an output.
    I don't understand why couldn't the application builder know which packages are necessary for building an executable.  The builder already knows the list of LabVIEW VIs I am using.  I am sure some of those VIs are linked to some package.  For example, one of the packages says it is needed for 3D graphs.
    Thanks for your help, though.

  • When i use f/fox, i get tiny google bar and everything else disappears

    When I press m/Firefox, a much smaller google bar than usual comes up. Apart from the smaller bar the page is blank ie no File, Edit, View etc, no go back a page, not even a start button!

    Make sure Popup blocker is enabled in your Firefox
    *https://support.mozilla.org/en-US/kb/pop-blocker-settings-exceptions-troubleshooting
    MAke use of Firefox Popup blocker Addon
    *https://addons.mozilla.org/en-us/firefox/addon/adblock-plus-pop-up-addon/

  • No sounds working eg keyboard, apps, connection, although speaker works volume keys not working on volume bars to go up or down but alerts have noise and Siri etc

    It's only just done it today my phone switched of because ran out of battery and now there no sounds :S my volume buttons are being recognised im pressing them but you can usually press for more 'squares' of volume and there's no squares no noise through games anymore no lock sound no keyboard sound no youtube sound but my speaker works as when i press for siri i can here the talking when i have phone calls or alarms i have sound please help?
    i phone 4s

    found this and it worked after 1st step so hope this helps other people too
    srode1000
    Re: iPhone 4S sound problems 
    Dec 29, 2011 2:05 PM (in response to unowen57)
    Hi Guys,
    I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine.
    Cheers

  • Nav bar and headers not showing up in IE9

    After I select the ActivX option "allow blocked content" the navigation bar and white headlines disappear in the IE9 browser. Any thoughts or suggestions? Thank you!
    www.moxiespeak.com/indextest

    Your Cufon file is out of date.
    See
    http://forums.adobe.com/message/3710256
    More info
    http://themeforest.net/forums/thread/fix-for-cufon-not-working-in-ie9beta/31932

  • Volume bar is frozen

    from time to time the volume bar and volume controls on my OSX LION mid2010 13MBP freezes up - Any idea why this is???

    my father came into my room and i told him that something was wrong.
    and me being as oh so SMART as i am forgot how to reset it and lost my manual.
    he reset it.
    it is fixed.
    thanks for nothing!
    --haley

Maybe you are looking for

  • Thunderbird updates when i don't want to update?

    I have a workstation running XP (a perfectly good O/S - regardless of what Microsoft says) and on which I installed Thunderbird (v2.0.0.24) For some reason, despite selecting to NOT have automatic updates, Thunderbird keeps automatically upgrading to

  • Can't open PDF's from Safari

    Since long time I have not been able to open PDF files from a webpage I have opened in Safari. After changing to Safari 3.0.4 Safari teminates short after I try to open a PDF file. Can sombody help me with advice?? My vife has a similar computer, sam

  • Network shares can't be ejected? ("Ghost" share problems)

    This topic is to try to solve a problem I'm having, as well as many of my Mac friends, when they use a network share, and it then cannot be unmounted. Basically, there are servers no longer accessible, because we switched LANs, etc. Symptoms: in the

  • Severe Memory Leak in 10.1.0.3

    Hi, There exists a severe leak of element names (QxName), when garbage collecting elements, which has been constructed as; XMLDocument doc = new XMLDocument(); doc.createElement("AnyName"); After GC references in oracle.xml.util.QxNameHash$WeakValue

  • Application-defined or Object-defined error

    Hello, When I open Input schedule through open dynamic templates I get the following error message Application-defined or Object-defined error Version : BPC 7.0 SP05 Request your guidance. Thanks, Ramsiva