Volume button non-responsive, speaker works with specific processes only (not itunes, pandora, etc), but functions perfectly with headphones

Volume button non-responsive. Speakers only work with specific functions, but all works perfectly with headphones usually.

sounds like old
https://discussions.apple.com/thread/1343532?start=315&tstart=0

Similar Messages

Table contained in a topic causes slow response when working with source

I am using RoboHelp V8.0.2 (I have applied the two fixes available from the Adobe product site).
Here is my issue:
I am documenting a product that has over 1,500 metrics.
I am trying to make a list of 1,077 metrics in one topic (all the metrics are of the same "type" so they are grouped together).
The table presenting these metrics has two columns, a Field Name column and a Description column.
There is not a lot of text within the table - most of the explanations and calculations are defined outside the table.
When I have more than about 400 table rows, the response time working with the topic in source is just horrible.
It took 3 minutes to open the topic in source, another 3 minutes to move the table over .425in from margin.
When I try to close the project, it gets hung up.
Has anyone else run into a problem working with tables within a topic?
I had a similar response time issue with V8.0.0 in general when I first installed it.
Once I installed the two fixes, that problem was (for the most part) eliminated.
I think the second fix specifically addressed response time issues when working in source.
I am going to try this on one of my other writer's machine to see if it is the age of my computer.
My computer setup is:
Dell Precision work station with an Intel Xeon 2.40GHZ processor and 2MB of RAM.
I am using Windows XP Professional 5.1.26 Service Pack 3.0.
I have a 110 GB hard drive with 18 GB available.
As always - thanks for any insight or information.
Michael F Weart

Hi Michael.
Interestingly the maximum number of rows you can use when you create a table via the Table > Insert > Table menu item is 100. That said, I've just created a 500 row table and whilst it is slower than a smaller table it is OK. I am also using RH 8.0.2 but on a higher spec PC.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

My volume button's no longer working unless headphones are used

Hi all
The last couple of days, my volume button no longer works (it brings up the ringer box on display, but volume is unchangeable) and the ipod volume slider has disappeared from the screen. I can change the volume in settings, but no sound is being played through the internal speakers when used as an ipod (headphones work fine and volume buttons work with headphone). I still have internal speakers working when a phone call is received or an alarm sounds.
I've tried restoring from backup and hard resets, but neither of these things worked. No new software has been installed since the most recent backup so I'm at a loss what to try next so hoping someone has some suggestions

Thanks Deeco, I tried cleaning the headphone jack but that didn't fix it for me (although I'm not sure leaving it on a radiator all night would generally be a good thing so I didn't try that!!
But I have fixed it though
After the headphone jack cleaning didn't fix it, I cleaned out the charger/docking station connector with a plastic toothpick by running it very gently and carefully either side of the strip of pins - and got out a couple of rather large lumps of fluff - and this seems to have fixed the problem for me.
Hope this helps others fix theirs.

Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

HT201401 The volume buttons on the side of my iPhone 4S do not work . Is there a way to turn them on or off or are they broken

Volume button don't work . Can they be turned on and off?

If the iPhone falsely senses it is docked due to short in the charging port it can disable Volume buttons. Shorting in charging port can be due to dust, debris, etc. If no Warranty, clean with toothbrush and small amount of Isopropyl Alcohol. Never hurts to try a Restore with current iTunes on your computer, too.

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

Update to iOS 6.1.2 makes my power button non-responsive !

Anyone have this issue now? Update to iOS 6.1.2 makes my power button non-responsive. It wasn't like this before. It seems to lag for a few seconds before using the power button actually shuts off the screen.

The firewall would be in your router.
I would just keep retrying. The update is first downloaded. Then the update is expanded and then the iPod contacts the Apple server to verify the update. For some reason at that time the iPod can't contact the Apple server. That has happened to me and it went through after one or two retries.

My iPhone just started up "all by itself". The error message "this accessory..." The iPhone5s works with headphones, but no speaker. The phone rings, works, everything else is OK, but no startup sound nor keyboard clicks, and other oddities.

hi all,
iPhone error message, "This accessory is not made to work with iPhone" after that my iphone 5s working with headphone and loud spekers but not inside spekers please suggest.

Hello konankiani,
Thanks for using Apple Support Communities.
To troubleshoot this issue you're having with your accessory, please review the following support article for the resolution:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Take care,
Alex H.

Smart connect not working with headphones

smart connect app has stopped working with headphones, have tried emptying data and also restored the phone to factory settings, but still nothing with any pair of headphones, I have installed the soundabout app and all headphones are working with that, so wondering if it is a software problem rather than the headphone jack that is the problem, any advice please?
Solved!
Go to Solution.

You tried a factory reset - Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data so backup what you need 1st - This is not the same as a factory reset but will achieve the same outcome
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

Siri on Iphone 5 only works with headphones

I have an iPhone 5 64 gig gsm, factory unlocked phone. Siri only works with headphones or when you use raise to speak. When I attempt to use it without it doesn't seem to hear me. I read a few threads on the subject and it seems this is a known issue. Most of the time the threads end when someone finds a solution without the solution being disclosed. Apps like Soundhound and Shazam seem to work fine so it appears the issue is software related. I have notice Apple texting does not work with the mic either. This is a very strange problem and I would appreciate any help you can give me as my iPhone is no longer in warranty.

Hey W. Harrison Stone,
Thanks for the question. It sounds like you may have a hardware issue with one of your microphones on the iPhone (three in total). To help isolate the issue to software or hardware, it may be best to back up and restore your iPhone to factory settings. However, before doing so let's first try a simple restart/reset of your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a restart/reset, follow the instructions in this resource to backup and restore your iPhone:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

My new I phone 4s does not ring when someone calls. Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Try a different ringtone.
Reset or restart the device.

My iPhone will do absolutely nothing. It won't charge or start up. I've tried several different chargers and none of them work. I've tried restarting it and everything, but nothing works. Can anyone help?

My iPhone will do absolutely nothing. It won't charge or start up. I've tried several different chargers and none of them work. I've tried restarting it and everything, but nothing works. Can anyone help?

Sounds like it is time to take it back to Apple and ask them to repair it for you.
Allan

My iphone 4s doesn't have music coming from the speaker and I cannot adjust the volume, however my phone rings and works with headphones. any suggestions?

I got my phone recently and for some reason the speakers arent working. I can only hear my music and ajust the volume if the headphones are plugged in but it doesnt solve anything if they arent plugged in. Please help me.

Hello there, Ashleyyyy.
The following Knowledge Base article should get you going on resolving your issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

My volume buttons have ceased to work when I want to use the built-in speakers, however they will work when I use my headphones....help!

This thread concerns IOS 7.1.2. update and the subsequent loss of volume button functionality and use of internal speakers.
Please can someone help from the mac team!
It's not a jailbreak phone. The phone is a replacement from Apple and the volume buttons are virtually won't work for certain functions on the phone. Here are the symptoms:
When the volume buttons are pressed on the home screen i get "ringer" and the speaker symbol appear but nothing more (ie. +/- volume)
When playing back from iTunes with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
When i playback Youtube content with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
With headphones plugged in sound is audible and volume buttons work.
Whilst using voicemail, (no headphones connected) i can play the message through the speakers and control volume using side buttons.
I have restored the phone and this has not fixed the problem.
iPhone 4S, iOS 7.1.2. upgrade

Hey there jeremy,
It sounds like your Volume buttons aren't working correctly and you are also not getting sound from your built in speaker. I would start by quitting all the running apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

Volume button non-responsive, speaker works with specific processes only (not itunes, pandora, etc), but functions perfectly with headphones

Similar Messages

Maybe you are looking for