Volume buttons don't work after installing ios 7.0.4

I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
Any ideas on how to resolve this issue?
Thanks

I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

Similar Messages

  • Apps don't work after installing ios 6

    after I installed Ios 6 on my ipod touch 4th two wks ago none of my apps work correctly and I can't even connect to app store or itunes. I get an error "cannot connect to itunes".. also can't connect to safari. I sent my ipod over to apple but because i have physical damage they would not repair. I had no problems with it until i installed ios 6. i have restore back to new and still same issues.  thanks for any help! 

    If you still have the problem after restoring to factory settings/new iPod that indicates a hardware problem.

  • My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

    I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

    Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
    When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
    Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

  • Volume controls don't work in Messages iOS 8. And music stops playing when I open Messages

    My volume buttons don't work when I'm in Messages on iOS 8, I can't change the ringer or headphone volume. More annoyingly music stops playing when I open Messages, but I can start it again. Any help on this would be greatly appreciated.

    For all of you, the first thing to do when these things happen after an update, is to close all your open apps and reset. This will cure your ills 99.9% of the time:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • The power button and the volume buttons don't work

    The power button ant the volume buttons don't work. I've tried to restore a previous version and doesn't work.
    I use iOs 5.
    Thanks

    If you did not restore to factory defaults/new iPod try that.  If you still have a problem after that then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

    I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all.  I have already tried the following:
    Switched the Lock Rotation/Mute settings in General
    Power cycling it
    Held the sleep and menu button to reset it (the button worked for that at least)
    Done a network reset
    Reset All Settings and restored from backup
    Reset All Settings and restored from iCloud
    Erase All Content and Settings and restored from backup
    Erase All Content and Settings and restored from iCloud
    If anyone has any OTHER suggestions besides what I've already tried, I am all ears.  Thanks.

    Go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • IMessage and push notifications not working after installing iOS 7!!

    My iMessages and push notifications don't work after installing iOS7..!!! I can't even log in to iMessages using my Apple ID.. And every time I log into Facebook or whatsapp it keeps telling me to connect to iTunes to receive push notifications..!!
    I connected to iTunes on my comp and tried resetting my phone.. Nothing works!! HELP

    Its stuffed, iMessage and facetime are both sitting on "waiting for activation" so they are not working, 1 post suggested resetting the phone again setting up as a new phone and then turning iMessage and Facetime on and then restoring.  After the reset iMessage and Facetime started working, I did the restore and it stopped working again.  Nice waste of 2 hours.

  • Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

    Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)  --not able to use the Beats Speakers. Any software updates I need to install?
    This question was solved.
    View Solution.

    Hi Jim,
    You're welcome
    Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
    There is an alternative IDT Audio driver you may wish to try on the following link.
    http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
    Let me know if you get the same error with this version.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Buit in ethernet don't work after installing Lion

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
    Someone else has the same problem?
    On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
    Is there somebody who has te same problem and has a solution?

    Something does look odd to me unless it's a typo in your post.
    This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
    I work with a modem with te folowing preverences:
    Wan IP address    87.211.205.210
    Lan IP address     192.168.1.1
    Primery DNS server       62.58.50.5
    Secondary DNS server   62.58.50.6
    and a separate router Netgear WGT624v3
    This is not exactly what I would expect from System Preferences/Network
    the system preferences for the network are
    Configure       by DHCP
    IP address     192.168.1.15
    Subnetmask  255.255.255.0
    Router           192.168.5.1  <<<<<<<<<<< this should be 192.168.1.1??????
    DNS              208.67.222.222
                         208.67.220.220
    The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
    If this is not a type then this is a problem!
    Not sure how it got to be that way.
    Does it persist when resetting the modemand router?/
    Steve

  • Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

    card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
    Tried downloading this driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
    still dont work.

    Hi,
    Download and install the Chipset driver on the link below.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
    After the installation has completed, restart the notebook.
    Next, download and install the Card Reader driver on the following link.
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I just opened my new earphones and the volume buttons don't work! Help

    I just used my iPhone 5s earphones the first time yesterday and the volume buttons don't work. I tried unplugging them and then plugging them in again and they still don't work. Also when I plug in any kind of earphones in my phone it doesn't completely go in, is that supposed to happen?

    Never mind, I found out why it didn't work. Since my phone and earphones were new the earphones didn't plug in well. So when I plugged it into my mac it went all the way in and the buttons worked. When I plugged it back in my phone it went al the way in this time and the buttons worked.

  • Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

    Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • PL/SQL don't work after install Oracle 9204 patch set

    I'm using Oracle 9.2.0.1.
    some pl/sql don't work after i install database patch set 3 (9.2.0.4).
    code--------------------------------
    BEGIN
    dbms_aqadm.stop_queue(
    queue_name => 'WB_RT_SERVICE_QUEUE');
    exception
    when others
    then
    null;
    END;
    error message is: ora-03113 end-of-files on communication channel.
    please help. thank you !!

    Can you please tell me the soluation of this problem as I am also facing the similar problem ?
    Thanks in advacne ?
    Regards
    Satpal

  • Push notifications not working after installing IOS 7.1. Need your help.

    whatzapp is working, push SMS notifications have completely gone after installing IOS 7.1

    I'm having the same problem. No SMS sound alert and no npush notifications since upgrading to iOS 7.1
    Made all the verifications in settings and it's all fine, still having the issue and it's annoying.

  • "Archive" and "View" buttons don't work after folio update

    Hi all,
    I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
    But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
    This is very annoying as well as time expensive.
    Tablet is Samsun Galaxy Tab SII with Android 3.2.
    Any help is appreciated.

    To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
    Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
    I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
    The interface is so small that it's hardly possible to use it, but it works.

Maybe you are looking for