Volume Buttons
I have a HP Pavilion G series with windows 7, and my problem is that my volume keys are not working and i have to press fn then the volume key to make it work. this did not happen before and i want it changed back to where i can just press the volume key to change volume, how do i do this and how can this problem be fixed?
Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ), then make the change shown in the document on the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Iphone 4 volume buttons not working
iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!
This could be due to some debris or dirt inside the headphones jack that makes the iPhone think that the headphones are connected even when they are not.
Try to see if you can clean the jack being very careful, with canned air as sold in electronics store. Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
Avoid introducing anything else like a pointed object. You could damage the jack.
If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets. If the problem continues after this, take it to an Apple Store to see what they believe should be done. -
Hp envy 6 1040EW audio volume buttons don't work
hello, i'm new to the forum
i have a problem with my HP Envy Ultrabook 1040EW with the volume buttons (f9, f10 and f11 )
they will only work when i have opened the beats audio application or i've clicked on the speaker sign
were you can slide the volume up and down.
if anyone has the answer or the same issue please reply.
Thank you very muchBartB,
Access the BIOS menu and reset the factory defaults.
1. Shut down the laptop
2. Restart it and tap the F10 key repeatedly
3. It should lead you into the BIOS menu
4. Press F9 to load defaults and then F10 to save and exit
The compuer should then restart and take you back to your main desktop screen. Once there test out those 3 keys.
Please respond back with your results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
This thread concerns IOS 7.1.2. update and the subsequent loss of volume button functionality and use of internal speakers.
Please can someone help from the mac team!
It's not a jailbreak phone. The phone is a replacement from Apple and the volume buttons are virtually won't work for certain functions on the phone. Here are the symptoms:
When the volume buttons are pressed on the home screen i get "ringer" and the speaker symbol appear but nothing more (ie. +/- volume)
When playing back from iTunes with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
When i playback Youtube content with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
With headphones plugged in sound is audible and volume buttons work.
Whilst using voicemail, (no headphones connected) i can play the message through the speakers and control volume using side buttons.
I have restored the phone and this has not fixed the problem.
iPhone 4S, iOS 7.1.2. upgradeHey there jeremy,
It sounds like your Volume buttons aren't working correctly and you are also not getting sound from your built in speaker. I would start by quitting all the running apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling -
How do I increase the voicemail volume on an iPhone 4s ( Verizon )? The phone volume is fine. I have adjusted both side volume buttons as well as the volume control in settings.
Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4. -
There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.
hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Volume button dont work correctly
Hello,
I have iPhone 4S on 5.1.1 which I bought in September last year.
Yesterday when I listen to music with my iPhone I found out the the MINUS volume button dont work correctly.
It's need to push him hard to decrease the volume. however the PLUS volume button work correctly.
In addition there is no "click" sound when I press the minus volume button.
what should I do?
I live in ISRAEL and there isn't Apple Store here so the only solution for me is to contact the carrier which I bought the iPhone from them but they probably will require payment for the repair.sorry but i actually need to use the volume buttons Jujusoccer11
i've tried resetting already and restoring from back up already but still has the same problem lllaass,
i'll try restoring to factory defaults now, i hope it works -
My volume button for higher volume is not working
I think there is a Windows bootcamp application that will recognize those keys. The bootcamp stuff is here: http://www.apple.com/support/bootcamp/
I think it is called bootcamp assistant. Look here: http://www.mac-guides-and-solutions.com/boot-camp-assistant.html -
The volume button on my ipod touch doesn't work unless headphones are plugged in?
Hi there,
So I have had this ipod for a while now but just recently it's doing this thing where i can press the side volume buttons but they don't do anything unless the earphones are plugged in. i have reset it a number of times and had it plugged into my computer to charge it completely and nothing works. when i go to play music on the ipod without the headphones, the slider doesn't even show up...any suggestions??Try restoreing the iPOd, first from backup and then to factory defaults /new iPOd if the problem persists. If you still have the problem then you likely have a defective headphone jack.
In that case I would make an appointment at the Genisu Bar of an Apple store to confirm.
Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place is less expensive. Here is one, Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Is it possible to lock the volume buttons on my iPod Touch?
Something is forcing the volume down button on my iPod down all the time. Because the volume is constantly being turned down the volume square is always up in the middle of my iPod. Rather than having to replace the whole volume down button or the whole iPod, is there a way to simply lock the volume buttons on the side of the iPod?
There is no way to lock them. I would work through the general troubleshooting outlined here to rule out the possibility of a software, although it sounds more like a hardware one.
http://www.apple.com/support/ipodtouch/assistant/
B-rock -
Hello,
I have an iPhone 4 and recently started to have some problems. First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too. Also, my up volume button does not work. This is with the headphones also.
I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it. I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months! and I really don't want to go without my phone that long.
Does anybody have any suggestions?
Thanks so much!!Sounds like it either believes that there are headphones plugged in, or the switch is broken.
Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective. -
I was updating my ipod touch and the updation had an error and it froze at the apple logo with the loading bar underneath. How do I fix it? I tried the turn off button home screen button and even the volume buttons. I cant get anything to work. Please help me.
Connect to itunes and retore.
-
Ipod Touch 5.1.1 update lock and volume buttons wont work.
So I just updated my ipod touch 4G to the ios 5.1.1 version and ever since my volume and lock buttons aren't working/responding. The funny thing is, a lot of people are posting the same question but they get the same answer from the same person that says to hold the lock and home button when everybody specifally states that the lock and volume buttons aren't working so those answers are useless. I tried resetting all the settings to factory from the settings menu but still the same problem. What should I do? Is it a bug for every new updater?
Try changing the DNS server on the iPod. See:
iOS 5 update issues "Network...: Apple Support Communities -
I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting). My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't. I am super frustrated at this point. So any suggestions would be great. Am I missing something basic or do we just have a soundless iPad now?
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
My phone is 2 months out of warranty, it's never been dropped or miss used yet the past week every day something has gone wrong with it. First the lock button stopped then the side volume buttons. Then the head phone port when I putt headphones in the phone turns the volume
Down automatically and it won't turn up until I take my headphones back out. The battery lasts 4 hours max after a full charge and today I took my phone off the docking charger and all my music has gone! The phone is breaking down more and more everyday what is going on! I know people who have had there iPhones years an non of this happen! I still have a year left on my contract too!Who is your carrier and what is your coverage with them? If you are with say Verizon, and have Total Equipment Coverage or Extended Coverage, they will swap it out for you under Manufacturer Warrantee.
Maybe you are looking for
-
Windows 8 saying printer error, but still printing
Okay so I just got a new labtop (hp) with windows 8 and the hp envy 4500 printer, everytime I print out something (via wireless connection) on the labtop in the right top corner, a popup will say error printing ( can't remember exactly what it says)
-
Hi friends; I need a small help. I want to change the property of a button based on the checkbox selected or deselected value. My problem is : if checkbox is selected then disable the button else if checkbox is deselected then enable the button. if(c
-
Java Add-in on an existing ABAP instance
Hi, I uninstalled the ABAP instance before installing ABAP+JAVA. However, when I started sapinst to install JAVA Add-in (Step 1 of 3), it prompts for the profile directory and I no longer can find it under \usr\sap\<SID>\SYS\profile directory since t
-
Hi friends, I am trying to consume a WebService and the WSDL that I try to consume passes the test performed with report RSSIDL_DESERIALIZE_DEMO. But when I try to execute the WebService, I get the following error: Error (id=SOAP:1.001): CX_ST_GROUP_
-
A few days ago, my MPB started to be really slow. Everything takes time, I cannot use several applications at the same time anymore, or nothing works. I tried cleaning the disk and I deleted all useless applications. I have 422Go/499Go of free storag