Volume change on track without disturbing set automated volume changes

I'm finished with my first project. When it mixed down to iTunes, I discovered that one track needed to be bumped down just a bit; but I don't want to disturb all the automated volume contours that I already set. Surely I can lock the whole track or group all the automation nodes and then change the volume overall while keeping the proportions of my automated volume controls, but I haven't figured it out. Thanks. James

Good to know!

Similar Messages

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

Can't add a new audio track without any settings

Can anyone tell me were faced with the same problem. Doing audio post production in Logic Pro X, the latest version, the project is big, At some stage the work I was faced with the fact that you can't add a new audio track without any settings, no matter what inserts I track with duplicate settings of one of the tracks and it begins to sound with this track. I don't add a new audio track with duplicate settings. I add a new one, and I still opens the track with some sort of settings. What is it? This is a glitch or I'm somewhere that we have not considered? Duplicates the configuration of one of the tracks collected in group 1, which I did for editing convenience. Duplicates and also automation and if the new track am I doing something then this machine is transferred to the existing track from this group.

Everything works in full 'Logic Pro X' mode. It's just a glitch in my project. The problem while you decide this: I insert a new track and it reset and set the output.

How do you add a new scene to beginning without disturbing movie with music and beat markers?

How do you add a new portion to the beginning of your project without disturbing the rest of the project that already has perfectly place clips attached to beat markers with the music ?
I forgot to add a tittle intro before the music starts with the attached pictures. When I try to add the whole project goes out of sync.
I want to just add an intro without disturbing the entire project.
Thanks

Well, if you re-attach your background music under the first clip, the starting point will be at the start of that clip so I think it will still be in sync. If not it's simply a matter of nudging the music track a bit along the timeline. Comparing the audio waveforms of the two tracks should help with this. When its right you can delete the track in the background music position. Now you can add what you like before the first clip without affecting sync.
Geoff.

How to restore time machine backup without disturbing already installed app

Hi!
My school recently reconfigured/reformatted my macbook and install the school image. Now it is filled with applications that the school help us installed. Now how do i restore the backup that my time machine backups last time? Migration assistant or what? I did not change my mac, it is just that my hard disk got reconfigured. How do i restore backup without disturbing the apps my school installs?
Please help thanks!
ALa.

alazahee wrote:
I did not change my mac, it is just that my hard disk got reconfigured.
I'm not sure what you mean by that. Is your user account still there?
If not, and if you have either Time Machine backups or a "clone" as backups, yes, use Migration Assistant. See [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html]. Note that you must be logged-on with a user account that's named differently from any of the accounts you want to transfer, or else be prepared to rename the duplicate.
If your backups aren't either Time Machine backups or a "clone," you'll have to drag and drop or restore using the app that made them.

How can I join 24bit tracks without ripping from CD?

I've begun to upgrade my library to 24 bit audio, and many of the albums I want to upgrade have tracks which should be "joined." But if I buy, say, Pink Floyd's Dark Side Of The Moon from HDTracks, and want to have each side play as one continuous track, I have to burn it to CD first, then rip it. Which reduces the audio back to 16 bit. I wish iTunes would start selling albums in 24 bit ALAC, but that's another issue. Does anyone know a way to join 24 tracks without burning to CD and ripping?
Thanks!

Mark Bradford wrote:
Yes, I suppose I could use Garage Band or Logic for that. Makes for a lot of work, though. I guess I was hoping for something easier. Thanks!
Hi Mark,
Up to you, of course, but as audio editing tasks go, stringing a few tracks end-to-end is relatively simple.
The other option is just to put the relevant tracks in a playlist in the desired order, make sure Crossfade is set to 0, and play them in a row. Try it and see whether the transitions come across as "good enough."

Is there any way that apple can locate/track a lost iPhone? The tracker wasn't set up and switched on.

Can I track a lost iPhone without having set up and turned on the tracker on iclouds?
Would apple be able to locate the lost phone by using the serial number?
Many thanks!

No Apple won't be able to track it.
See this link for stolen/lost iphones http://discussions.apple.com/thread/3978740?tstart=0

Modifying an "ssl-proxy-list" without disturbing the active sessions.

Hello,
I would like to know if it is possible to have two SSL modules installed in a CSS11503 with each one having it's own "ssl-proxy-list" ("ssl-proxy-list list1" and "ssl-proxy-list list2"), but the two lists (list1 and list2) are exactly the same.
I will explain my idea:
In normal situation the two "ssl-proxy-list" are active and the user's encrypted sessions are load balanced between the two SSL modules. But when we need to make a change to the "ssl-proxy-list", like changing a server's certificate, I would like to be able to suspend one service (type ssl-accel with the "ssl-proxy-list List1" attached to it for example) and wait for all active sessions to terminate before suspending the "ssl-proxy-list list1" for applying the changes.
Once the first "ssl-proxy-list" is updated I would make it active again and apply the same changes to the second "ssl-proxy-list".
Doing this this way I would like to be able to upgrade the servers's certificate during the working houres without disturbing the connected users...
Do you think this way of doing would be possible, or do you have an other solution to modify a "ssl-proxy-list" without disturbing the active running sessions ?
Thank you for your answer,
Best regards

Hi Francois,
An SSL proxy list may belong to multiple SSL services (one SSL proxy list per service), and an SSL service may belong to multiple content rules. You can apply the services to content rules that allow the CSS to direct SSL requests for content.
The CSS supports one active SSL service for each SSL module in the CSS, one SSL service per slot. You can configure more than one SSL service for a slot but only a single SSL service can be active at a time.
No modifications to an SSL proxy list are permitted on an active list. Suspend the list prior to making changes, and then reactivate the SSL proxy list once the changes are complete. Once you have modified the SSL proxy list, suspend the SSL service, reactivate the SSL proxy list, and then reactivate the SSL service.
You can use maximum 4 different certificates at a time.
Use the suspend command to suspend an active SSL proxy list.
To suspend an active SSL proxy list, enter:
(config-ssl-proxy-list[ssl_list1])# suspend
use the url below for your reference:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.10/command/reference/CmdSSLC.html
Kind regards,
Sachin Garg
Senior Specialist Security
HCL Comnet Ltd.
http://www.hclcomnet.co.in
A-10, Sector 3, Noida- 201301
INDIA
Mob: +91-9911757733
Email: [email protected]

How can I reinstall Safari 8.0 without disturbing anything else?

How can I reinstall Safari 8.0 without disturbing anything else? I have OS X 10.10.1 Yosemite & Safari 8.0 (that comes in it) installed on a MacBook Pro laptop and a Mac Mini tabletop computer. I want to access internet banking which goes without problems on the laptop but does not work on the tabletop. The latter says "somebody tried to display the application in a frame..." whatever that means and obviously for safety reasons I can not start banking it always comes back to the screen with this warning. I tried Mozilla FireFox on the tabletop Mini and everything works fine including the banking. A Mac expert suggested something is wrong with the Safari settings and I should reinstall it. How do I do this without reinstalling the System? Would it suffice to wipe out the Safari Preferences and start anew? I am looking for somebody's advice more experienced than I am. Thanks!
Andy

Hello isza41,
Before you try to do any uninstall/install stuff let me suggest you something:
Create a new user and check if the same happens within its account. You could do so by going trough the following steps:
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user. - Standard user account would be perfect here.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
Now Logout from your account (⌘⇧Q) and Login to the one you have just created. This account is fresh without any changed settings(as a new instance would look like).
Check if the same would happen and you would see if this is an issue with your installation or something more general.

How to edit audio without disturbing video

Hi:
I have working with FCP 6 on another office Mac and got 7 for my iMac. On the other machine, I could edit audio (cutting, trimming, deleting, etc) without disturbing the video clip tied to it. However, now I cannot. If I highlight the audio track, I also highlight the video track. Any cutting or trimming I doto audio results in a trim or cut of the video.
How do I make it a default that these two tracks should be treated separately?
Any help would be really great.
Thanks.

This looks like it will work. However, is there anything in settings to, by default, only select the one audio or video track that I want to edit rather than selecting the audio or video tied to it too?
Thanks

How Do I go directly to Desktop without disturbing the Opened pages? I am using Lion OS

How Do I go directly to Desktop without disturbing the Opened pages? I am using Lion OS

You can tap one of the keyboard Function (F) keys. Without knowing which keyboard you use it 's a little difficult to say. If you don't have a keyboard shortcut to do that, create one in System Preferences - Keyboard. I have my F6 key set to take me directly to the desktop. However the way your question is phrased I'm not positive that is what you are asking.

Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

Yes, that is possible. Please check out the following Apple Support article for details on how.

Post A/c entries for JIN1 or JIN2 without FBKP setting

Hi all,
I want to post value of sales tax(JIN1 OR JIN2) values at Billing(VF01) without Automatic setting of FBKP.
Means to say I want to post above values with help of assiging a/c keys (MW3 & MWS) in Sales Pricing procedure and corresponding entries in VKOA with GL Account.
But while saving Billing(VF01) system is displaying ERROR "Error in account determination: table T030K key ECOA MW3." , because I have remove GL against MW3 in FBKP and assigned in VKOA.
Pls suugest the solution/config. in detail.
Thanks in advance,
Raju

Hi
You have to maintain the above condition types in tax procedure and maintain the account keys in TAX PROCEDUR and donot maintain in PRICING PROCEDURE. Also ensure that you have maintained respective G/L account in OB40 and not in VKOA..
Regards
MBS

QUESTION - Has anyone else recently experienced an iPhone or iPad's alarm going off by itself, without being set by the user?

Has anyone else had his/her phone alarm (on the clock app) go off by itself, without being set, and with a very weird sound?
Happened to me at 11:34 pm last night (Oct 28, 2013). I'm using an iPhone 5 with iOS 6. Sound was named something like "Orari" and sounded like a woo-woo ghostly alarm. I immediately swiped to stop the alarm and then deleted the alarm, which I had NOT set, but which seems to have set itself. The iPhone was plugged into my iMac at the time. There is no such sound on my phone or, it seems, anywhere (I Googled).
The night before, Oct 27, something similar happened to my iPad mini running iOS 6 ... also plugged in to recharge, but at a wall socket ... the sound was like a fire or smoke alarm.
I know it's Halloween week, but some of us need our sleep!
Any explanations?

Hi Littleleslie,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes up, double tap the Home key and make sure you don't see the Alarm app in the list of background apps. If you do, swipe up on the thumbnail for it to close it out completely.
Then all you can do is wait to see if it will let you sleep through the night!
Good luck!
Cheers,
GB

Add specific hotkeys for vlc (disable video track without disabling audio track)?

There's no way to add hotkeys for [menu bar > Video > Video Track > Disable] under Preferences or Advanced.
When I use [SysPreferences > Keyboard > Keyboard Shortcuts > Application Shortcuts > '+'] to add a hotkey for "Disable", it applies to audio also [menu bar > Audio > Audio Track > Disable].
How do I disable the video track without going through the menu bar? Can I go into vlc.app and edit it? Or is there an app that will help? Or is there a way to specify which (menu bar>disable) I want to add hotkeys to, in application shortcuts?
I'm actually using 10.8 if that matters.
(It only has 35 followers compared to 10.9's 250 followers)

Bump

Volume change on track without disturbing set automated volume changes

Similar Messages

Maybe you are looking for