Volume changes not taking effect in nested sequence

Sometimes when I make volume changes to a clip in a sequence the change does not carry over to the master sequence that the original is nested in. What am I doing wrong? I am double clicking on the nested sequence in the master sequence to open it before I make the change to it.
Mac OS X (10.3.8)

I'm not sure it applies to your case, but I had similar problems with video rendering: changes to the nested sequence sometimes didn't appear in the nesting sequence, and attempt to render didn't work because ... there was nothing to render according to FCE.
Then I forced FCE to render: I first selected the nested sequence (in the main sequence), then I first applied "Disable Clip" (contextual menu) and then "Enable Clip", and finally the render bar changed to red (or orange), meaning it needed rendering. I rendered, and all changes in the nested sequence appeared in the nesting sequence as well.
Maybe it works also with volumes in your case...
Piero

Similar Messages

Printing Paper Changes not Taking Effect

Hi,
I recently upgraded to Windows 7 from XP and I also have Acrobat 9 Pro installed.
When I use a different size page, in this case 11x18, and go to print it will start out as our printer default 8 1/2x11 which is should be. I would then proceed to go to the printer preferences and change the paper size and click "ok" to get back to the main print page where I would notice that the print preview would not update ot the new size. If I proceed to print with it showing the 8 1/2x11, even though it is set to 11x18, it would scale it to the 8 1/2 x11. What I have found to work around it is if I click and then unclick the button "Choose Paper Source by PDF Page Size" it would scale the paper to the correct size. I use different size paper and do not want to change the default size.
This is sort of a hassle and I sometimes notice that when I'm going from 11x17 to 23x20 it would not even update and would not allow me to print on the correct paper size.
I am using a sharp AR-M207 printer. I have tried to use the PCL/PS/PPD drivers for the latest version and they all have the same effect. Additionally Acrobat 9 Pro is also up to date.
Is there an update or a patch somewhere or another reason why this is occuring. I am not included to switch printer mainly because I do need a large format printer and its difficult to find one.
Thanks,

Daniel,
Yes I am currently using the most recent version of Acrobat and Printer Drivers.
I have not tried the Help > Repair option. I actually noticed that this issue occurs on my laptop as well, same operating system (Windows 7). It is possibly an issue because of compatability with Windows 7 although there might be a workaround for it.
I have tried a different printer, ie my laptop, and the same problem occured.
I can look for outdated Sharp print drivers but that might be difficult to find.
Also I currently use Windows 7 64bit.

Posture Policy changes not taking effect in ISE!

Hi all
I think that something is definitely wrong with the posturing rules on our ISE. I am seeing weird behaviour when changing posturing policies and thier elements in our ISE.
In Full, we currently have a policy written with a requirement that clients must have SEP 11, 12.0 or 12.1 installed and the AV defs can be up to 28 days older than the latest AV definition file date.
However, prior to us rolling out SEP12.1 in our environment, we wanted to test that the ISE could remediate SEP 12.1 just like it does for SEP 11 clients.
To do this I created a policy just to test SEP 12.1 being out of date for over 2 days. A client never matched this policy, it was still passing posture using the old policy. I imagine this is because the old policy was still referencing that sep12.1 defs can be up to 28days older than the current release date.
So, in the AV Compound Condition for the old policy I unticked references to SEP 12.0 & SEP 12.1. This had no effect. When I looked at the posture reports they were still showing SEP12.1 clients passing posture on the old policy. Well, this can’t be possible as I have unticked those conditions now.
So, in the end, I was forced to complete delete the old Posture Policy Rule, the Requirements Condition and the AV Compound Condition. I then created it all again from scratch just for SEP11, so there is no reference for SEP12.0 or 12.1.
When I check the posture reports, they are still showing that the SEP 11 clients are passing posture on the old rule and old conditions that don’t even exist any more! Luckily, I haven’t broken anything as clients are still being allowed on to the network and they are being posture checked.
It looks like the ISE is holding on to this old posture configuration somewhere and it may be that the only was to truly get the ISE to recognise the changes I have made to the posture policies is by restarting a particular service (not sure which one) or restarting the whole node (which I don’t really want to do, and shouldn’t have to do surely!).
Any suggestions? This is rather urgent as it is holding up testing of remediation for sep12.1 clients.
thanks
Mario De Rosa

OK, i resolved this by performing a Re-Sync between my two ISE nodes.
It appears that the secondary ISE node went in to a "Replication Disabled" state. Once I performed the Re-Sync, the posture reports now show all the correct policies getting matched.
Lesson Learnt there!
Mario

[SOLVED] Syslinux.cfg changes not taking effect

When I first switched from grub to syslinux, I discovered that my system won't boot properly without a nomodeset command in the boot line (actually I knew that; it was also in grub but I installed that 5 years ago and long since forgot). It worked great.
A few weeks later, I had some trouble with the virtual terminal after X started, and someone suggested adding vga={x} to the boot command. I did that, but as it turns out the one I picked wasn't supported by my graphics card/monitor: Whenever I boot, it says to press {enter} to choose from available modes.
I found one that worked well, and added it to syslinux.cfg, saved my work, and rebooted. It *still* complains about the previous mode and makes me choose a proper one. I have rechecked that my new value is in syslinux.cfg and rebooted countless times since then, and the new values just won't take.
Is there something else I need to do after editing syslinux.cfg? The man page and wiki page are extremely thorough on initial installation and configuration, but not so much on making later changes.
Last edited by WyoPBS (2013-05-15 17:18:15)

When I change label values in syslinux.cfg the new label appears, so I am 100% positive I'm editing the right file on the right partition.
However, I found the answer -- When the list of modes pops up and I key in 313, the boot console is reading that as 0x313. When I have "vga=313" in the cfg file, syslinux reads that as 313 decimal which is 0x139, an invalid mode. It just never occurred to me that the mode menu was presenting hex values... Just had to change it to vga=0x313 and all is well.

Configuration Changes not taking effect for Sun Java Web Server 6.1

Hi,
We're trying to make some changes to a sun ONE web server, to accept a couple of additional MIME-TYPES, as well as turning on compression and adding cache control headers to files. Please review the following and advise as to our path to proceed.
Our first challenge is that it seems that the change to the mime.types file are not being applied. We've added these to mime.types:
type=text/cache-manifest exts=manifest
type=image/svg+xml exts=svg,svgz
Elsewhere in the file is a configuration for PNG
type=image/png exts=png
Using HTTPFox firefox plugin, it's evident that these file types are being served with the mime-type of text/plain. See the attached image. Also note that PNGs are being sent as text/plain.
Are there any other changes except for mime.types that we need to do through console or in any of the obj.conf or magnus.conf file.

yes there are two instances on that machine, the changes to mime types was done through console for both the instances and both the instnaces were restarted including the Admin server. However, we will still see content being served text/plain. Please help, if you want I can send you the obj.conf, magnus.conf and mime.types files so that you can take a look.

SLD Logical System Name Changes not taking effect in IDOC

All -
I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
Thanks!

Hi Dennis,
After changing the logical system name in SLD have you done "Compare with SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
- Pinkle

Weblogic 8.1 SP4 Admin Console JDBC or Start-up changes not taking effect?!

Gents..I have an open case with BEA on this one but wanted to get some immediate help here. I am trying to make changes to my JDBC pools to check the connection pools (reserved, created, & released) however once I check the boxes and click "Apply" then restart WebLogic the changes I made just revert back to as if I never made them?! This is the same case for when I try to undeploy a start-up class in the Admin interface. Permissions on the config.xml look to be writtable by the user who is running the weblogic process. Also after making the changes I only see a 1 byte change to the config.xml and dont see the changes (undeploy etc) actually being made?!
Any help would be greatly appreciated!
Thx
Cody

I did a reinstallation and the problem didnt re-occur. So one neednt work on this problem.
Priya

Account layout change not taking effect

I copied the account default layout to my own, and tried to remove all the campaign info that
won't be implemented. However, it still shows up even though I've attached the new layout to my profile.
Is there something I'm missing?

Maybe yor personal configuration is different and it takes the place of the default donfiguracion (the profile one).
To view that navigate to My configuration / Personal Page Layout.
Regards, Kim.

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

Changes to policy are not taking effect on windows 2000 workstations

We are currently running zenworks ver4. We have an XP 2000 mix
enviorment. When we make changes to the policy on XP the changes work.
When we make changes on the 2000 policy they do not take effect. I did
give the user local admin rights and that did not help. We are running the
latest client as well and installed the recent patches on the server.
Dan

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Changes is special conversion routine not taking effect

I changed a special conversion routine specified in a conversion rule(BD79) with a rule type copy sender field.
I made the required changes to the function module CONVERSION_EXIT_&_OUTPUT and activated it but still the outbound Idoc suggests that the changes are not taking effect.
Can someone suggest what may be the reason for this?

The issue got resolved

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Classic Report - Column Conditions Not taking Effect when Changing Pagination

Apex Version: 4.2.1.00.08
DB Version: 11g Release 11.2.0.3.0
Hi,
I have a classic report that has some columns that conditional hide/show depending upon the value of a page item. When the report is first displayed with the first pagination set(Rows 1-100), the columns display as they should.
When moving to the next pagination set(Rows 101-200), the columns no longer display as they should and it seems that the condition is not taking effect. Partial Page Refresh is set to 'Yes' for the report.
Any ideas on why this might be occurring?

tvanderl
Assuming you mean that columns are rendered while you expect them not to.
Are the conditions based on page items.
It could be that the session state of those items is different between when the page is first rendered and when de refresh due to the pagination is done.
See if adding the in the condition used page items to the page items to be submitted for the region helps.
Others wise see if you can replicate the issue on apex.oracle.com so we can see what you mean.
Nicolette

Group Policy - User Rights Assignments not taking effect on workstation`

Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations.
In Group Policy, (Computer Configuration/Windows Settings/Security
Settings/Local Policies/User Rights Assignment), I have added Power Users to
the "Load and Unload device drivers" policy. However this setting is not
taking effect on my Windows XP workstations. My DLU policy for users is
configured to have the users members of the "Users" and "Power Users" groups
on the local PC.
Other parts of Group Policy (Computer Policy/Administrative Templates) are
taking effect on the workstation, so I'm wondering if the problem I am
having is related to Security Settings only.
I enabled Group Policy logging on the Windows XP workstation and include it
below:
WMHelperInitialization (Mar 4 2004) called! Flags: 0x8001002. Event:
0x1000. Impersonation: 0x2
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x204
WMHelperSystemEntryEx called!
Entered GPCleanupEntry
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Persist Workstation settings from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Persist
Workstation settings not found. Assuming 0
Error 2 reading Persist Workstation settings
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Warning: C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini does not exist
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy Machine Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy Machine Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
Renamed Administrator account: Administrator
Local Administrator's user name = Administrator
Administrator account names match, skipping.
Renamed Guest account: Guest
Local Guest's user name = Guest
Guest account names match, skipping.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
GPCleanupEntry releasing mutex.
Exiting GPCleanupEntry: 0
Exiting WMHelperSystemEntryEx ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x0. Event: 0x0.
Impersonation: 0x0
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache .
No workstation. Exiting CheckForObsoleteWksCache
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x0 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Entering ApplyPolicies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Flags: 0x80000070
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Impersonating logged on user.
Context : OU=Users.OU=Newcastle.O=OSG
Full Object DN CN=wintest3.OU=Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=wintest3.OU=Users.OU=Newcastle.O=OSG, WINNT Workstation Package,
zenwmGroupPolicy, 512, pBuffer)
Reverting to system impersonation.
Found DN CN=XP User Package:WinNT-2000-XP:Windows Group Policy.OU=Policy
Packages.OU=Newcastle.O=OSG
WMCheckIfGroupPolicyObjectsChanged entered
Impersonating logged on user.
Reverting to system impersonation.
Group Policy object has NOT changed!
Exiting WMCheckIfGroupPolicyObjectsChanged 0x0
Entered ScheduleCleanup.
Loaded wmschapi.dll
Calling WMScheduleAction
Finished Calling WMScheduleAction. Returned 0x0
Exiting ScheduleCleanup 0x0
Entered BackupOriginalGP.
No backup exists. Creating one: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Backing up original GP to C:\WINDOWS\System32\GroupPolicy.WMOriginal
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\admfiles.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\adm files.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\conf.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\con f.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\inetres.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\ine tres.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\system.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\sys tem.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wmplayer.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wmp layer.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wuau.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wua u.adm
Copied file C:\WINDOWS\System32\GroupPolicy\GPT.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat
Entered SaveSecuritySettings
Inf path:
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\
Saving XP security settings
Saving Account Policies...
Saving Audit Policies...
Saving user rights...
Name: Administrator
Comment: Built-in account for administering the computer/domain
Full Name:
No rights.
Name: Guest
Comment: Built-in account for guest access to the computer/domain
Full Name:
Right: SeInteractiveLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: HelpAssistant
Comment: Account for Providing Remote Assistance
Full Name: Remote Desktop Help Assistant Account
No rights.
Name: SUPPORT_388945a0
Comment: This is a vendor's account for the Help and Support Service
Full Name: CN=Microsoft Corporation,L=Redmond,S=Washington,C=US
Right: SeBatchLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: vector
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: wintest3
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: None
Comment: Ordinary users
No rights.
Name: Administrators
Right: SeSecurityPrivilege
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeRemoteShutdownPrivilege
Right: SeTakeOwnershipPrivilege
Right: SeDebugPrivilege
Right: SeSystemEnvironmentPrivilege
Right: SeSystemProfilePrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeIncreaseBasePriorityPrivilege
Right: SeLoadDriverPrivilege
Right: SeCreatePagefilePrivilege
Right: SeIncreaseQuotaPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeManageVolumePrivilege
Right: SeImpersonatePrivilege
Right: SeCreateGlobalPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Right: SeRemoteInteractiveLogonRight
Name: Users
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Guests
No rights.
Name: Power Users
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Account operators
No rights.
Name: System operators
No rights.
Name: Printer operators
No rights.
Name: Backup operators
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Replicators
No rights.
Name: RAS servers
No rights.
Name: Pre2000 compatible access
No rights.
Exiting SaveUserRights (0)
Saving Security Options
Found: MACHINE/Software/Microsoft/Driver Signing/Policy
Data type is 3
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SecurityLevel
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SetCommand
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateCDRoms
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateDASD
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateFloppies
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/CachedLogonsCount
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ForceUnlockLogon
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/PasswordExpiryWarning
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ScRemoveOption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DisableCAD
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DontDisplayLastUserName
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeCaption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeText
Data type is 7
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ScForceOption
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ShutdownWithoutLogon
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/UndockWithoutLogon
Data type is 4
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineAccessRestriction
Data type is 1
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineLaunchRestriction
Data type is 1
Found: MACHINE/System/CurrentControlSet/Control/Lsa/AuditBaseObjects
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/CrashOnAuditFail
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/DisableDomainCreds
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/Lsa/EveryoneIncludesAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FIPSAlgorithmPolicy
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/ForceGuest
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FullPrivilegeAuditing
Data type is 3
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LimitBlankPasswordUse
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LmCompatibilityLevel
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinClientSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinServerSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoDefaultAdminOwner
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoLMHash
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymousSAM
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/SubmitControl
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Print/Providers/LanMan Print
Services/Servers/AddPrinterDrivers
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/SecurePipeServers/Winreg/AllowedPaths/Machine
Data type is 7
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/Kernel/ObCaseInsensitive
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session Manager/Memory
Management/ClearPageFileAtShutdown
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/ProtectionMode
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/AutoDisconnect
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableForcedLogOff
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionPipes
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionShares
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/RequireSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnablePlainTextPassword
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/RequireSecuritySignature
Data type is 4
Found: MACHINE/System/CurrentControlSet/Services/LDAP/LDAPClientIntegrity
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/DisablePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/MaximumPasswordAge
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RefusePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireSignOrSeal
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireStrongKey
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SealSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SignSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/NTDS/Parameters/LDAPServerIntegrity
Data type is 4
Administrator's user name = Administrator
Guest's user name = Guest
SaveHive entered
SaveHive exit : 0
Exiting SaveSecuritySettings 0x0
Backup path: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Exiting BackupOriginalGP 0x0
Entered RestoreCachedGP.
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
No gpt.ini detected, aborting RestoreCachedGP.
Checking whether OriginalGP exists
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring original GP.
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.UserCache,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.UserCache\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\User\MIC ROSOFT\IEAK\install.ins to
C:\WINDOWS\System32\GroupPolicy\User\MICROSOFT\IEA K\install.ins
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol to
C:\WINDOWS\System32\GroupPolicy\User\Registry.pol
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS2.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS2.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS3.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS3.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
to C:\WINDOWS\System32\GroupPolicy\Machine\Registry.p ol
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered MergeGptFile(C:\WINDOWS\System32\GroupPolicy.UserC ache, 0x80000070)
g_dwVersion: 0x0.
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Found machine extensions...
Found user extensions...
Exiting MergeGptFile 0x0
Reading user's user settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol
Entered parseRegFile
Val: 'BlockExeAttachments'
Added: Software\Microsoft\Outlook Express\BlockExeAttachments
Val: 'NoHTMLWallPaper'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\NoHTMLWallPaper
Val: '**del.NoChangingWallPaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop, val:
NoChangingWallPaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\**del.NoChangingWallPaper
Val: 'ForceClassicControlPanel'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceClassicControlPanel
Val: 'NoSMMyPictures'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMMyPictures
Val: 'NoStartMenuMyMusic'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoStartMenuMyMusic
Val: 'NoDesktopCleanupWizard'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoDesktopCleanupWizard
Val: 'NoWelcomeScreen'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoWelcomeScreen
Val: 'NoActiveDesktop'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktop
Val: '**del.NoInternetIcon'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoInternetIcon
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoInternetIcon
Val: '**del.NoNetHood'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val: NoNetHood
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoNetHood
Val: 'NoAutoUpdate'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoAutoUpdate
Val: 'NoSMBalloonTip'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMBalloonTip
Val: 'NoSMConfigurePrograms'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMConfigurePrograms
Val: 'NoComputersNearMe'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoComputersNearMe
Val: 'MaxRecentDocs'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\MaxRecentDocs
Val: 'NoSharedDocuments'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSharedDocuments
Val: '**del.NoStartMenuEjectPC'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoStartMenuEjectPC
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoStartMenuEjectPC
Val: 'NoActiveDesktopChanges'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktopChanges
Val: '**del.NoAddPrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoAddPrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoAddPrinter
Val: '**del.NoDeletePrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoDeletePrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoDeletePrinter
Val: '**del.NoToolbarsOnTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoToolbarsOnTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoToolbarsOnTaskbar
Val: '**del.NoSetTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoSetTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoSetTaskbar
Val: 'ForceStartMenuLogOff'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceStartMenuLogOff
Val: '{20D04FE0-3AEA-1069-A2D8-08002B30309D}'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Val: '**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{450D8FBA-AD25-11D0-98A8-0800361B1103}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}
Val: '**del.{645FF040-5081-101B-9F08-00AA002F954E}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{645FF040-5081-101B-9F08-00AA002F954E}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{645FF040-5081-101B-9F08-00AA002F954E}
Val: '**del.Wallpaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val: Wallpaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.Wallpaper
Val: '**del.WallpaperStyle'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val:
WallpaperStyle
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.WallpaperStyle
Val: 'NoDispScrSavPage'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\NoDispScrSavPage
Val: 'NoAddFromNetwork'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\NoAddFromNetwork
Val: '**del.NoAddRemovePrograms'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall, val:
NoAddRemovePrograms
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\**del.NoAddRemovePrograms
Val: 'ListBox_Support_Allow'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\ListBox_Support_Allow
Val: '*.fleetviewonline.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.fleetviewonline.com
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.osg.com
Val: 'NoHelpItemTutorial'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemTutorial
Val: 'NoHelpItemNetscapeHelp'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemNetscapeHelp
Val: 'NoHelpItemSendFeedback'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemSendFeedback
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\Certificates\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CRLs\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CTLs\
Val: 'ScreenSaverIsSecure'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaverIsSecure
Val: 'ScreenSaveActive'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveActive
Val: 'ScreenSaveTimeOut'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveTimeOut
Val: 'SCRNSAVE.EXE'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\SCRNSAVE.EXE
Val: 'ListBox_Support_ZoneMapKey'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ListBox_Support_ZoneMapKey
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\*.osg.com
Val: 'osgintranet'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\osgintranet
Val: '1A00'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1A00
Val: '1809'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1809
Val: '1803'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1803
Val: 'DontPromptForWindowsUpdate'
Added:
Software\Policies\Microsoft\Windows\DriverSearchin g\DontPromptForWindowsUpdate
Val: 'NC_RenameLanConnection'
Added: Software\Policies\Microsoft\Windows\Network
Connections\NC_RenameLanConnection
Val: 'PromptPasswordOnResume'
Added:
Software\Policies\Microsoft\Windows\System\Power\P romptPasswordOnResume
Val: 'NoAUAsDefaultShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUAsDefaultShutdownOption
Val: 'NoAUShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUShutdownOption
Val: 'BehaviorOnFailedVerify'
Added: Software\Policies\Microsoft\Windows NT\Driver
Signing\BehaviorOnFailedVerify
Val: 'MovieMaker'
Added: Software\Policies\Microsoft\WindowsMovieMaker\Movi eMaker
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol 0x0
Reading user's computer settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
Entered parseRegFile
Val: 'NoUpdateCheck'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoUpdateCheck
Val: 'NoSplash'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoSplash
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: 'NV PrimaryDnsSuffix'
Added: Software\Policies\Microsoft\System\DNSClient\NV PrimaryDnsSuffix
Val: ''
Added: Software\Policies\Microsoft\Windows\Safer\
Val: 'WUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUServer
Val: 'WUStatusServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUStatusServer
Val: 'NoAutoRebootWithLoggedOnUsers'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoRebootWithLoggedOnUsers
Val: 'AutoInstallMinorUpdates'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AutoInstallMinorUpdates
Val: 'DetectionFrequencyEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequencyEnabled
Val: 'DetectionFrequency'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequency
Val: 'UseWUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\UseWUServer
Val: 'RescheduleWaitTimeEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTimeEnabled
Val: 'RescheduleWaitTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTime
Val: 'NoAutoUpdate'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoUpdate
Val: 'AUOptions'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AUOptions
Val: 'ScheduledInstallDay'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallDay
Val: 'ScheduledInstallTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallTime
Val: 'RegistrationOverwritesInConflict'
Added: Software\Policies\Microsoft\Windows
NT\DNSClient\RegistrationOverwritesInConflict
Val: 'SearchList'
Added: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Val: 'PreventIISInstall'
Added: Software\Policies\Microsoft\Windows NT\IIS\PreventIISInstall
Val: 'SecurityCenterInDomain'
Added: Software\Policies\Microsoft\Windows NT\Security
Center\SecurityCenterInDomain
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol 0x0
Entered GenerateGptFile(C:\WINDOWS\System32\GroupPolicy)
g_dwVersion: 0x70007.
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x70007 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting GenerateGptFile 0x0
Exiting RestoreCachedGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Bumping GPT version...
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x70007 in gpt.ini
Using version: 0x70007
Saving GPT version: 0x80008
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x80008 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
No data for Administrator account name.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
Signalling OS to refresh policies
RegQueryValueEx returned 2
Policies are set to apply asynchronously
Policies will be processed asynchronously
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x80008 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x80008 in gpt.ini
Using version: 0x80008
Saving GPT version: 0x90009
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x90009 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entering RunGPUpdate
Exiting RunGPUpdate 0
Exiting ApplyPolicies 0x0
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x34349ce0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x2001. Event: 0x2000.
Impersonation: 0x1
Opened Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Current time high: 0x1c58076
Reading Last Run Time High from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Last Run Time High: 0x1c58076 in key
Software\Novell\Workstation Manager\Group Policies
Previous time high: 0x1c58076
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.
Full Object DN
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG,
WINNT Workstation Package, zenwmGroupPolicy, 512, pBuffer)
WMGetAllAssociatedObject returned 2
No associated workstation policies. Deleting
C:\WINDOWS\System32\GroupPolicy.WksCache.
DeleteGPRegVal: Error 0x2 deleting Group Policy Machine Flags
Exiting CheckForObsoleteWksCache 2
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x1 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Policy applied at predesktop. Skipping reapplication at user login.
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x38844da0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
Thanks in advance
Ali

DUPLICATE
Answered in
novell.support.zenworks.desktops.3x.workstation-manager
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp

BO Custom class not taking effect

Hi Experts,
Created a customer module for BO part,
Extended WrapperCrmWecRegisterBase and WrapperCrmWecRegisterConsumer with
CustomWrapperCrmWecRegisterBaseImpl, CustomWrapperCrmWecRegisterConsumerImpl respectively.
Created factory-config.xml in BO part and added the information:
<factory xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:wec="com.sap.wec.core.config">
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.rfc.WrapperCrmWecRegisterBase"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.rfc.CustomWrapperCrmWecRegisterBaseImpl" />
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.rfc.WrapperCrmWecRegisterConsumer"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.rfc.CustomWrapperCrmWecRegisterConsumerImpl" />
</factory>
I have added factory-config.xml in MD's metadata.xml
<config-file namespace="customer" part="bo" type="factory-config">factory-config.xml</config-file>
I have changed below code in the implementation to send langauge[iuser_language] to backend. But the hardcoded value is not shown in the backend debug mode of RFC: CRM_WEC_REGISTER_CONSUMER.
JCoStructure userLanguage = importParams.getStructure("IUSER_LANGUAGE");
        userLanguage.setValue("LANGU","FR");
Either ls_centraldata-partnerlanguage is still showing "E" and not showing "FR" or "F".
I also have added the public-parts for customer and sap folders.
Do I need to modify businessobject-config.xml or backendobject-config.xml files or any other?

Thank you Elena, I have modified as you suggested.
CustomUserCRMImpl declared in factory-config.xml
Imported CustomWrapperCrmWecRegisterConsumerImpl and modified accordingly.
<factory xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:wec="com.sap.wec.core.config">
<factoryClass
name="com.sap.wec.app.common.module.user.backend.impl.crm.UserCRM"
singleton="false"
className="com.customer.wec.app.common.module.user.backend.impl.crm.CustomUserCRMImpl" />
</factory>
CustomUserCRMImpl.java looks like:
if (partner.isNotOnDB()) {
                functionReturnValue = CustomWrapperCrmWecRegisterConsumerImpl.execute(jcoCon, user,
                        user.getUserConfigurationBO(), password, appl_url, getLoginType(),
                        props.getProperty(EMAILTEMPLATE), props.getProperty(NOOFDAYS),
But still its not taking effect.
Do I need to declare the CustomUserCRMImpl in backendobject-config.xml too?

Volume changes not taking effect in nested sequence

Similar Messages

Maybe you are looking for