Volume constantly turning on and off on my iphone

Please answer my question I really need the volume

I found out what the issue was because my Rezound was having this issue. Verizon wanted me to factory reset my phone. I didn't want to do this because I have about 200 apps on my phone. I did some research and here is what you do:
1. Turn the phone off
2. Take the back off the phone (The antenna are in the back)
3. Start the phone
4. When it loads to the home screen, open the dialer and press *#*#4636#*#*
5. When a new menu appears titled "Testing" tap Phone Information
6. Scroll down where you will see a drop down menu to tap on u nder the words "Set preferred network type:"
7. Select "CDMA + LTE/EvDo auto"
8. Once you do that back all the way out to the home screen, shut the phone off, put the back and and start the phone.
9. Problem solved until it does it again and then repeat all the steps again.
I restart my phone every few days just to clear memory and it happens about every fifth time a restart. I actually have learned to go into the menu as a described about and check that the phone is in the right setting before I restart and it usually doesn't have a problem. I hope this helps.

Similar Messages

HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple.

My iPod Touch 4th generation is about a year and a half old. Today it got wet and I dried it off, but now it is turning on and off by itself and the volume is going up and down by itself. What do I do?

My iPod Touch 4th generation is about a year and a half old. Today it got wet and I dried it off, but now it is turning on and off by itself and the volume is going up and down by itself. What do I do?

First dry the iPod.
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
Then
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

My iphone 5 screen needs to be turned on and off twice before I can slide the screen to unlock it.

My iphone 5 screen needs to be turned on and off twice (hit the top button or home button, then turn off the screen again, then hit one of the buttons again) before I can slide the screen to unlock it. Also, when I was using it yesterday, the volume on my music was sliding up and down by itself, it clicked on albums by itself and wouldn't register my touch, the song kept pausing and playing by itself, and when I backed out of the app, all my running apps started sliding back and forth across the screen as if I were running my finger back and forth extremely fast. It also then opened the phone app, started to call one of my contacts, and wouldn't let me hang up. My phone is relatively new (got it back in June) and I haven't dropped my phone at all, haven't gotten it wet, etc... The only thing I've done to it recently is install iOS7. Does anyone know why this is happening and how I can fix it?

Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!

Clicks & glitches in the automation when bypass turns on and off

I get clicks & glitches when I automate logic plugins to turn on/off (bypass) on an audio track. The clicks & glitches happen at the point in the automation when bypass turns on and off.
Has anyone else experienced this?
Who can help me with this?
Thanks so much
ps - I use Logic Pro 8

Certain fx plug ins unfortunately just do that when you switch them on and off while audio is passing through them. It's not technically a bug, it's just the way the audio is handled by the plug in that means it can't manage to cleanly cut in and out. When this happens, you have to use alternative methods such as the one already suggested. Depending on what you need to do there are other ways around this. If you're able to engage/disengage the plug in at moments of silence in the audio (such as in between words in a vocal track), then you could use volume automation to go in very precisely to silence the clicks when they happen. But if you're automating the effect on continuous audio, sereen's suggestion of using an aux and automating the send is a more appropriate workaround. Another technique is to just bounce an entire copy of the track with the effect on it, and then just edit it in and out (still on a separate track if you like) as needed, this way you can use fades as well to clean it up. But this is only appropriate in certain situations and might not be the right approach depending on what you're doing.

Soundbar/wifi automatically turning on and off

Hi,
I have a HP dv7t-3000 notebook. This notebook has the 'touch sensitive' bar on top of the keyboard with entertainment controls like volume/mute/play-stop-forward etcc.. and the wifi 'touch sensitive button'
My problem is that these are being automatically turning on and off. My volume for example is automatically going up and down. My sound at this very moment is turn 'mute' on and off like every second. My wifi is also turning on and off- the wifi 'touch sensitive button is turning red and blue repeatedly' (so on and off)
My question is, is there a way to DISABLE this whole 'touch bar'. I never turn my wifi off so I don't need that stupid button, and I'd rather control my volume in Windows than to have this stupid thing keep changing volumes up and down and muting on and off.
So I'd just like to keep wifi-on and then have this stupid bar be disabled! Who cares about these buttons if they're gonna behave like this.

If you updated to iOS 7 then I believe its something with iOS 7 because you are not the only one who has that problem, try to restore your iPhone and see if the problem is solved. If not , wait for iOS 7.1 it should be fixed on that new software.
Note:- don't forget to back up your phone before restoring or you will loose all your stuff.
-Let me know if this helped you, have a nice day :) ~iMond
For more news and help, Like this page on Facebook: www.facebook.com/inewslate
and there you can send your questions in a message.

How can I automatically have the XRAID turn on and off at a specific time?

Hi Everyone,
I was wondering if anyone can help me figure out how to turn on and off the XRAID at a specific time. My electrical bills are crazy. Is there a way to get this done?
Thanks,
Jorge

Hi Everyone,
I was wondering if anyone can help me figure out how
to turn on and off the XRAID at a specific time. My
electrical bills are crazy. Is there a way to get
this done?
Thanks,
Jorge
I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
1) unmount volume (must)
2) issue a telnet command via expect script to control the power strip to power off the array.
If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
http://alienraid.org/article.php?story=xserveraidtools12&query=command
You can issue a command to execute the RAID admin shutdown command.
Put the master script into a unix cron job.
macbook pro Mac OS X (10.4.7) typing this on a white box pc

Ipod Touch 8g Turns on and off by itself, ect **PLEASE HELP**

Hi, I have about a year old ipod touch and i accidently got the screen wet a while ago and I think it may be broken.
It turns on and off by itself
Volume control on side wont increase If i make it increase, it decreases the volume
Ipod Touch takes random screen pictures
The calibration I think is off, I will click on one app and it goes to another app close to it
Ect.
PLEASE HELP its been a couples weeks
Message was edited by: chandler5

Have you tried:
- drying by:
http://www.ehow.com/how5356376fix-wet-ipod-iphone.html
- After it is dry try restoring it via iTunes, first from backup and if still problems then to factory default/new iPod.

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?

Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.

How to use a slider to turn on and off lights

Hi guys. i am fairly familiar with Labview now but cant seen to get my head around this problem. i have a slider which is numbered from 1 to 10. below the slider i inserted 10 LED lights. my aim sis to use the slider to turn on and off the lights. for an exmaple, when i set the slider to one, the light on the far left should go on. when i set the slider to 2, the first light should go on and the second light next to it should go on, and the pattern continues. i thought of using the number to array boolean but it didnt seem to do the trick. could you please help me out. i have attached the basic layout of how i wanted the objects to be arranged
kind regards
joe
Solved!
Go to Solution.
Attachments:
led control.vi ‏7 KB

wow! simplicity at its best! thats really straight forward to understand. i think you are right about making complicated circuits. the reason why i had asked to know how to do this was because i wanted to learn how to control motor directions using a slider. so after i thought i had got the easiest way of giving out 2 different outputs using a slider, i replaced the lights with switches that changed the direction of the motor. i successfully did this for the first motor and it rotated fairly well, but wanted to control 4 in total. so i simply copied and pasted the code and re-asigned the switches to different motors. when i did this, the results did work BUT the motors went very very slow. the movement was not steady and kept skipping. i think this its due to the coding being overly complicated thefore causing a serious lag. if you could please have a look
kind regards
joe
Attachments:
controling test.vi ‏29 KB

How to Set Automatic to turn on and off at specified time my TV with STB

It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer.
My Specific question is, if I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said to me to just press the record button on my remote, which I know right away that it will just record, and I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.
Any one here has any idea, please help.

The set top box does not offer any auto on or auto off feature.
you can only do that if your TV offers the feature.
If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer. they make them and you plug them into your wall, they are very cheap.
I have had directv and fios and neither of my systems did an automatic on or off.
BUT my samsung TV upstairs does have that feature (auto on and off) and I have not checked my mitsubishi downstairs.
so you may want to check your settings on your TV to see if it will do it, like my samsung does.

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

The power button on my iPad mini is stuck in so iPad just keeps turning on and off

The power button on my iPad mini is stuck in so iPad just keeps turning on and off! How much would it cost to fix?

Hey Tommy_mccloud!
I have a link for you that can help you find the answer to that question:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Although I turned off WiFi, set as 'require admin password to turn on and off wifi, when I turn on my MacBook Pro, retina latest model, just got for a month, it turns on wifi automatically, is this a back door or virus or security hole? Thank you

I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem?

I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem?

Volume constantly turning on and off on my iphone

Similar Messages

Maybe you are looking for