Volume control and video stopped working after recent update

I am having two problems that started at the same time. First, I cannot control the volume. When I hit the volume control buttons the volume display comes up but with a circle with a line through it. I checked the sound in Preferences and it showed no outputs, not even the internal speakers. I do still get the tone at startup but nothing else will play sound. Second, I can't seem to play videos from any online source (i.e. YouTube, Hulu, etc). Any attempts to do so lock up my browsers (both Safari and Firefox). I can play iTunes videos, but there is still no sound. I've only had the computer a couple of months and haven't recently installed anything new on it. My computer did download 3 updates earlier today though I don't remember checking what they were. Any help anyone can give me would be most appreciated.

I did what you suggested and after the apple icon, I get the iTunes icon with a plug in cord.
After plugging in, a box pops up in itunes indicating it has detected an ipad in recovery mode and it says it can not connect with itunes until restored. I have attempted to restore via itune but the next pop up box say "this device is not eligible for the requested build."
When I hit "more information" I am told to update my itunes to the latest which results in my having to download iOS 7.0.4 on my macbook pro.
Am I at a stand still because I won't download 7.0.4 on my macbook pro?

Similar Messages

Win 7 Drag and Drop stopped working after iTunes update

I really hope that this is the right sub-forum for this.
Here goes:
A few days ago I finally upgraded to 9.1.1.12 and today I was in for a nasty surprise: I can't move MP3s from windows explorer into the iTunes window any more.
I often create playlists and then drag files I get from a few bands I follow directly into those playlists. This is an easy and painless process. My FTP client downloads the files into a prearranged folder whenever they get a new song up, and I then open said folder and drag and drop the file into iTunes.
I just got a new song to listen to today, wanted to drag it in an... Nothing. Just the black, crossed-through circle of "No".
It worked last week. It worked the week before. It worked the years before.
I got Win7 64 in April. It worked on it since then.
It stopped working today.
And no, I won't let iTunes consolidate or organize my media. It only organizes files bought via the iTunes store, nothing I rip from CDs or obtain otherwise, as those files have to be playable by two other players as well. But, again: Until this night it worked without a problem. And after the new update... Stopped.
Is there a new option I'm missing?

I was able to fix it.
I simply stopped running iTunes in Admin mode. For some reason, running it in administrator mode makes it behave "worse" than not doing so.
When I ran it as a normal program, I was able to drag files into it correctly again.
Which is weird, as the last version was also running in admin mode, but worked perfectly.

Vimeo Videos stopped working after Muse update

Videos no longer generate a thumbnail and they do not work after publishing. I looked in Safari Developer and found a server error. What gives? This all worked great before. I am now in a bit of a pinch. Please help.
Here is the code new code from Vimeo today.
<iframe src="//player.vimeo.com/video/55783549?title=0&byline=0&portrait=0" width="600" height="337" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>

After many tries, my videos will now preview in Muse, however, they do not show upon Export in Safari. ????? Has anyone seen this problem?
<iframe src="//player.vimeo.com/video/55783549?title=0&byline=0&portrait=0" width="800" height="450" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>
I have some more tweaks to this site, and the videos are a placeholder for the final versions, but here is the site on Catalyst. Works great. When I export HTML I can't get the videos to preview or load.
http://successbydegrees.businesscatalyst.com/index.html
My slideshows don't export correctly either but I think I know how I am going to fix them.
Thanks.

Ipad 2 stopped working after recent update

I downloaded the latest IOS update yesterday and today my ipad 2 won't even turn on.
My ipad worked fine last night. I am wondering if my ipad is now toast?
Any assistance would be greatly appreciated.

I did what you suggested and after the apple icon, I get the iTunes icon with a plug in cord.
After plugging in, a box pops up in itunes indicating it has detected an ipad in recovery mode and it says it can not connect with itunes until restored. I have attempted to restore via itune but the next pop up box say "this device is not eligible for the requested build."
When I hit "more information" I am told to update my itunes to the latest which results in my having to download iOS 7.0.4 on my macbook pro.
Am I at a stand still because I won't download 7.0.4 on my macbook pro?

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Audio and Video Stops Working

Hello,
My audio and video stops working. It starts working again when I reboot. I'll leave the computer for a while, maybe overnight, and when I return the audio and the video on the iMac will not function. When I click Play on iTunes or You Tube nothing happens.
Any suggestions will be much appreciated!

Slight update.
I found this thread: http://forums.adobe.com/message/4872302#4872302
It gave me some of the links I had been desperately looking for. I have an intel on board GPU and the GTX 675 MX. Because of MSI's bios, there's not a lot I can do in there to ensure that the computer is using the GTX over the Intel. I found some settings which give preferences for which card to use for which programs. PPro had the Nvidia already selected, but I went so far as to completely remove the Intel from all of the settings. Still no change. Today I went as far as to actually disable the intel GPU in the device settings. I rebooted and I wasn't getting anything in PPro. I switched her to software acceleration and it asked me if I wanted to delete the previews. I said yes and now she can see again. Of course I have NO clue yet if this is a permanent change or not. I do want the Hardware Acceleration, so leaving it in Software Mode is not a long term solution. It gets her working tonight, so on that note I'm happy.
Time will tell if this helps or hinders, but it's some sort of movement.

My wifi stopped working after a update last year and I have updated since, can this be fixe

MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

BoardMaker plus 6 stopped working after OS update

My Boardmaker Plus stopped working after I update my system to OSi Yosemite. The disk just spins and spins and the program does not come up? Is anyone else having this problem? How can I fix it. I need to use the program for work.

I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

My imessage is not Working after recent update

My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.

, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

Bookmark bar and menu stop working after awhile on Firefox 12

I have upgraded to Firefox 12. Everything works fine when I start up Firefox, but after some amount of use (and I can't always reproduce this) eventually when I click on bookmarks in my Bookmark Bar or from the Bookmark menu, nothing happens. Firefox doesn't load the bookmark. If I open the "Show All Bookmarks" window and click on bookmarks there, they load fine and then the menu and bookmark bar suddenly start working again. If I close the "Show All Bookmarks" window the Bookmark Bar and menu stop working again.

Hi ischou,
I haven't heard of this particular issue, but you might want to try starting Firefox in [[Safe Mode]]. Let is sit for a while as you described above and if you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Mouse and Keyboard stops working after a while

Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all. I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

And then after a while it will just use a new address:
Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
Then after that my mouse is unusable, the following is shown:
Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
Unplugging and plugging the mouse back does not work
I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
sudo rmmod uhci_hcd
sudo modprobe uhci-hcd
But I'm still not sure what causes the problem.
Last edited by willy (2008-10-30 15:02:54)

Volume control and video stopped working after recent update

Similar Messages

Maybe you are looking for