Volume control crashed on 6th nano.

The other the volume control on my 6th generation ipod nano crashed. I has nothing to do with the control on the headphones, but on the ipod itself. I pressed the + button but it didn't get any louder but less actually. The + button is also somewhat harder to press than the --. Anybody had the same experience or any suggestions on how to solve the problem?

Get it serviced.

Similar Messages

  • Unlocking volume control on ipod nano

    I never locked the volume control  on my ipod nano but it is asking for a combination.  The volume is weak and seems to be getting weaker even though the battery is saying it is charged.  How to I get the combination and could something else be wrong with the volume?

    If you no longer know the combination or don't know what it was set as you will need to restore the iPod via iTunes to get past it. 
    I'm assuming you have tried another pair of headphones?
    B-rock

  • HT1386 my pc crashed and I bought a new laptop and was able to recover all my music from the old hard drive and transfer it to the new pc.  I bought a new album on itunes and am unable to download it on my 6th nano even though I authorized the new pc.  An

    My old PC crashed and I ended up buying a new one.  I was able to recover all my music from the old hard drive and restore it in itunes.  I purchased a new album online thru itunes and added it to my library.  When I tried to add the album to my 6th nano it wouldn't download.  All the tracks are check marked and I can listen to the album on my pc but it won't sync onto the ipod.  The new pc is authorized, any ideas?

    You can only sysc with one iTunes library. The new computer is a new library. You have to restore your iPod on the new conputer and then sync.

  • How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    Hi TheGuru146,
    It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    -Jason

  • Ipod nano volume control

    I have an ipod nano, and I was messing with my ipod in my pocket and somehow locked my volume control so it will only go up so loud. I've tried going under "Volume lock" in the "Settings" area, but its asking for a combination and I don't know what it is, any suggestions how to take the lock off or find out what my combination is? Thanks! You can also email me with an answer, [email protected]

    http://docs.info.apple.com/article.html?artnum=303414
    KoDor

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • Right-click on Magic Mouse and Volume Controls on Wireless keyboard suddenly stopped working

    I am running Mavericks 10.9.2 on an Late 2012 iMac.
    One morning the right click on my Magic Mouse and the volume controls on the wireless keyboard stopped working.
    These mouse and keyboard themselves seem fine; they work okay ehn used on a MacBook.
    Everything else about the mouse and keyboard is fine.
    This seems to be a problem what has been around for a whole, with a wide variety of solutions.
    I have read
    https://discussions.apple.com/message/16799039#16799039
    https://discussions.apple.com/message/23474052#23474052
    https://discussions.apple.com/message/19660884#19660884
    and have tried
    Clicking on and off the 'right click' checkbox in the Mouse System Preferences - No effect
    Deleting /Library/Preferences/com.apple.Bluetooth.plist - No effect
    Restarting in Safe Mode - When starting in safe mode, the computer crashes out and restarted
    Resetting NVRAM / PRAM - Is it CTRL+CMD+P+R or CMD+OPT+P+R ?  Neither work for me (I do try it using a wired keyboard, but never get the double chime)
    Upgraded to 10.9.2 - no effect
    Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext and and back in (and re-authenticate) - No joy
    Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext from a working MacBook on same OS - Made the keyboard misbehave even more
    Has anyone got any other cures for this?
    Thanks in advance.

    Here is what worked for me.  My scrolling on the mighty mouse and a few buttons on my wireless keyboard weren't working properly.  I reset the SMC, a link explaining the process is below.  Hope it helps you too!
    http://support.apple.com/kb/HT3964

  • Can'y see the volume control in my display?

    Can someone help me?
    My stupid friend "played" with my Ipod Nano settings and now has both the volume control and the time remaining of the song disappered...changed into a lot of dots?!?!?
    How do I get volume control back??

    The Dots are the Rating screen. Press the center button a few times.

  • Volume Control

    How do I get all the songs on my Nano to play at the same volume control? Some songs are almost too loud while others I can barely hear.

    Use the soundcheck feature to level out the volume somewhat.
    Apply it in iTunes using the edit/preferences/playback menu (Windows).
    iTunes/preferences/playback (Macs).
    Turn it on on the iPod using the settings/soundcheck/on menu.
    After applying it in iTunes, sync your iPod to reflect the changes made.
    There are 3rd party programs that do this more effectively (at least in my opinion).
    For Windows there is mp3Gain.

  • HT201401 volume control increases on its own

    volume control goes loud without touching it. anyone have this issue?

    Maybe try and let the iPod sit in a sealed container of rice for a few days to continue drying out.  It might not hurt to then connect the Nano to iTunes and restore it to factory settings.
    Restoring iPod to factory settings
    Otherwise, it's likely that the moisture has caused some internal component(s) to short circuit. In that case you'll need to have the iPod serviced/replaced eith by Apple or a third party repair company.
    B-rock

  • My volume controls don't work

    The volume controls on my Nano don't work.  How can I repair their operation?

    Read the PDF user manual for a possible solution:  iPod Manuals, search through Apple's Knowledge Base for support Articles and/or iPod Nano Support 

  • Volume control doesn't work

    Had 2 kernel panics recently, and been noticing a string of strange issues, one of which is that the Volume control doesn't work, or specifically, it doesn't affect many applications.
    For example, when using Chrome, if I want to use the volume control to icrease or decrease volume on a movie (YouTube etc), the hardware controller keys (F10 - F12) do not have any affect on volume, but I am able to change it using the software interface of the current player.
    Something has gone haywire with my laptop... disks are unmounting as well (USB & FireWire 800), major settings seem to have returned to default (trackpad and other), and installed software seems to have disappeared (eg, Paragon NTFS). I am concerned!
    Help, please!
    I am still using 10.6.8.
    Peter

    I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
    i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
    any one seen this before.. ?
    all my other Mac's work fine..
    please help..

  • Set volume control

    on my 1gb nano when i want to raise the volume control i get it to the place to set it,move the bar and hit the center button as instructed.some times it goes back to the previous window and sometimes it goes to the next window where you either set a code or just hit done.then it goes backto the window ahead of the one that the volume control bar is in.hit the button to go to the volume control to check it and its right back where it started.so how do i make it set?this is getting to be a pain.and it is updated with the latest up dates.

    Hi,
    Right click the speaker icon in the Taskbar and select 'Recording devices'.  Left click the 'Internal Mic' once just to highlight it and then click the Properties button.  The controls you require should be on the 'Levels' tab.
    NOTE:
    If you do not see the option as described above, try using Recovery Manager to reinstall your Audio Driver ( IDT, Connexant etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 7
    Recovery Manager - Windows Vista
    After the reinstallation has completed, restart the notebook and check if the option is now available.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My macbook's volume control is locked...

    my macbook's volume control is locked...  plz someone xactly tell me what i shud do to get rid off this problem..!  incase of tooth pick plz specify about where i mus poke or something..!   plz help :'(

    Hi Bob,
    I've also got this problem. I saw on another thread you were helping a lady who also lost the sound in her MBP, but then her disk crashed! If you can help me I'd appreciate it.
    I've got sound on startup, but otherwise my volume is greyed out. Theres no red light in headphone socket.
    I've posted the thread below on this topic but have had no replies, in my post I mention that when I use my bluetooth headset my volume works, but if I disable BT or remove the BT speaker device and then try to use my internal MBP speakers, no joy. I DON'T think its related to the BT speaker.
    https://discussions.apple.com/thread/3168348
    I haven't done a Os reinstall yet, can't find disk, but this doesn't seem to work for people anyway?
    Some things I've tried
    PRAM reset
    Repaired permissions
    Rebooted (holding 'D' key)
    My IAC driver was also greyed out and I followed this post to make it active but problem still not solved!!
    http://www.mac-forums.com/forums/switcher-hangout/116240-no-output-devices-found -2.html
    Would really appreciate your input.
    Mark

  • RE: Macbook Pro mid 2010 headphone socket, volume control fault.

    RE: Macbook Pro, volume control faulty (shaded out) when i unplug my headphones the headphone socket doesn't swithch to the internal speakers after searching around for answers i found faulty i  found a the faulty headphone socket is common on MBP.
    After fidling around with preferences having no luck i finally tried the old paper clip test but i used an iphone sim card tool just to be on the safe side and would you believe it its a faulty sensor.
    i am very unhappy with Apple who are obviously are aware of this problem and the hundreds of posts out there grapically recording it i have several macs this one,s standard warranty ran a few months ago so i will have to pay out even more for this is this a taste of things to come as Apple gets bigger and bigger leaving quality behind, that would be a shame.

    I don't believe so since it crashed again while doing a time machine back up while in safe boot and there is no mention of vmware in the crash report for that. Also it definitely has nothing to do with windows either since I'm able to boot directly into the windows partition with no problems.

Maybe you are looking for