Volume control exceeds 100%. Results in bad sound...

Hey,
since Gnome 3 my volume control has a little annoying bug.
When I hit the Fn-Keys for volume or try to adjust volume with the panel icon
the volume exceeds the actual limit which is shown in sound prefrences.
This is really annoying and I'm actually afraid that it might ruin my speakers after
a while because it happens to often out of a habit.
There must be a simple way to set the limit in a config file!
cheers

https://bugzilla.gnome.org/show_bug.cgi?id=649411

Similar Messages

I cant get the volume controls to work. The only sound it will make is the ringer

My volume control will not work. I can only hear ringer if I change it in the settings

Hi gavinruth,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
- Judy

Volume control sound.

How to stop the Apple volume control making those annoying "Bep Bep" sound when you lower the volume?

Thanks Franz, I tried and found out the answer after I post the question.

[SOLVED] how do i get laptop volume control to function?

On my toshiba laptop, my sound "works" however the rotary volume control at front of the laptop does not affect the volume. When I turn it the volume bar appears on the display but nothing happens. This used to work but I have been "playing" with my arch system to try and gain knowledge of arch et.al and now I have broke something and cannot remember how to revert back.
I am running kdemod(4.2). SystemSettings->Multimedia shows four "cards":
HDA Intel ALC268 (analog)
HDA Intel ALC268 (digital)
Esound (ESD)
HDA Intel ALC268 (IEC958 (S/PDIF) Digital Audio Output)
p.s. I can only get sound of the Analog device. The "test" button doesnt do anything with the other devices selected.
Soundchip reported by "lspci":
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Soundmodules reported by "hwdetect --show-sound":
SOUND : snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore
modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
options i915 modeset=1
alias net-pf-10 off
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(mii r8169 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="daz"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#eth0="dhcp"
# Wireless: See network profiles below
#eth0="dhcp"
#INTERFACES=(eth0)
wlan0="wlan0 192.168.0.10 netmask 255.255.255.0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(preload hal @cpufreq @networkmanager @kdm)
would really appreciate if someone could get my volume control working.
Last edited by keratos (2009-05-04 12:33:57)

Wilco wrote:Edit: misread your post..., anyway you need to set the main volume control to the one that produces sound, in your case analog.
eh ?? how is a volume control 'set' to the analog card?
Last edited by keratos (2009-05-04 08:10:52)

Lenovo Miix 2 8" - Separating volume controls for headphones and speakers

The sound options for the Miix 2 out the box combine the volume control for internal speakers and for headphone jack, i.e. there is only one volume control for both the speakers and the headphones on the mixer settings at the the volume icon at the lower right hand of the desktop. So when headphones are plugged in, there is still only a "speakers" control shown.
I work in an office and would like to have the speakers muted if the headphones are pulled out.
Similar issues resolved on other devices directed to install an alternate sound driver (that offered separate controls) or pointed to some other settings in the sound driver properties menus where this could be manually done, but I'm having trouble applying any of them to this device.

Worked beautifully! Thank you very much!!
nyxacith wrote:
Tried it reverting to an older version of Skype. Didn't work.
But! I believe I may have found the solution.
Here are the steps I took to solve the issue:
1. Right click on the audio volume control icon -> Playback devices. The Sound window and Playback tab should be open.
2. Set Speakers/HP as both the Default Device and the Default Communications Device.
3. Go to Skype>Tools>Audio Settings. Set Speakers settings to: Speakers/HP (IDT High Audio Definition CODEC).
Hopefully this will work for anyone else who has the same or a similar problem.

My iphone 4S doesn't show the volume controls when playing videos and the speakers don't sound. But if I plug in the earphones then I can hear fine and the volume controls appear on screen. Please someone help.

After a week or so of installing IOS 7 now I having this problem, the speakers don't work for videos, music or apps sounds, but they work fine for using the speaker phone. It's definitely some software issue as the volume control appears when i plug in the earphones, but disappears when unplugging them, same happens with the volume buttons on the side, they don't work when trying to use the speakers, but the work when using the earphones. Please help if you have a workaround for this. I don't want to carry my earphones all the time to listen to videos and music.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Satellite A355-S6931 Low Sound - Volume Control wheel just spins

I've checked and tried everything I can find or know how to do to get enough volume and nothing works. Everything is set to 100 %. I use headphones (same ones I used with my 5 yo Toshiba). Why does that wheel just spin with no change in volume and no stopping point either way? I have to suspend my Netflix service as I have about 2% sound. Satellite A355-S6931 - 6 weeks old now.

It might as well be broken as it affects absolutely NOTHING no matter how far or how long I turn it in either direction.
I expect this computer to deliver an acceptable degree of sound. I have some hearing loss and use headphones exclusively which have their own volume control. My 6 year old Toshiba laptop would blast my eardrums out with volume if I wasn't careful to keep all controls from the max. Granted, I paid more than double as much for the computer back then and got Win XP-Prof besides. I wasn't looking for a "cheap" computer but expected comparable quality to my former Toshiba, in spite of being stuck with Vista. I could do without MANY of the bells and whistles this thing has for some acceptable SOUND. Seems like a basic provision.
Can I get the sound card replaced for something better?
What about the adapters that sell for about $10 on eBay?
BTW -- the Toshiba DVD Player won't work at all. Using Window Media Player shows the DVD but the sound is totally inaudible. I've had to suspend my Netflix service.

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Need to generate a continuous sine signal to sound card output with volume control

I need to create a vi to generate a sine wave signal to sound card with Labview 8.5.
there is an example written with lvsound2.llb for it. but the volume control sucks. it has only 0~100 integer control and is not accurate enough for my application.
some one mentioned Contineous Sound Output.vi in Example search. But I could not find it any more in Labview 8.5.
Anyone could help? Appreciate it.

Dumbhead wrote:
there is an example written with lvsound2.llb for it. but the volume control sucks. it has only 0~100 integer control and is not accurate enough for my application.
Could you please explain in greater detail what you mean by "the volume control sucks"? The volume control is a Double Precision Float data type not an Integer. By accuracy, do you mean that you are trying to get greater precision? If you mean that the example simply is not loud enough at the maximum volume, you can increase the amplitude of the sine wave. I hope that helps!
Mike Lyons
National Instruments
http://www.ni.com/devzone

IPad 3 Volume Control says Sound Effects and won't adjust

Regardless of the mute button/orientation lock whenever I push up or down on the volume control buttons on the side of the iPad, the Volume indicator that lights up in the center of the screen says "Sound Effects" and there are no bars below it to indicate the actual volume, and it will not change. If I double press the home button, and swipe right to the dimmer/volume/play controls, the volume bar doesn't even show up in its location there. I'm thinking that the kids changed something in one of their games. And turning it off, or even doing the hard reset of pushing the home and off button simultaneously doesn't clear the problem out.

Greetings!
I just now followed the advice above, and solved my problem by using a different charging cable.
Must be lucky that the old charging cable is "dorked", and not the internals of the iPad!
The indication of a bad cable, I guess, is that the sound controls fade out after a few seconds with it connected, but they do not do so with a good cable.
Thank you for the shortcut to happiness, easytiger!
BTW, some folks also say that the problem may be related to using a non-Apple charger or cable; my "bad" cable is non-Apple; the good one is the original (albeit too short) cable that arrived with the iPad.

[Solved] Can't Start Pulse Audio and No Sound/Volume Controls

Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it. I tried killing pulseaudio and restarting but I keep getting the same error:
pulseaudio -k:
E: [pulseaudio] main.c: Failed to kill daemon: No such process
pulseaudio --start:
E: [pulseaudio] main.c: Daemon startup failed.
start-pulseaudio-x11:
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
This is the output of pulseaudio -v:
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aac0"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aac0"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "1415"
I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
I: [pulseaudio] source.c: device.product.id = "2000"
I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
I: [pulseaudio] source.c: device.string = "hw:2"
I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
I: [pulseaudio] source.c: device.access_mode = "mmap"
I: [pulseaudio] source.c: device.profile.name = "multichannel"
I: [pulseaudio] source.c: device.profile.description = "Multichannel"
I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 3 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c2"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
I: [pulseaudio] client.c: Freed 0 "Login Session c2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
When I start pavucontrol I get this:
Can someone help me correct what the issue is, please let me know if you need more information.
Thanks in advance.
Last edited by Dobbie03 (2015-05-15 20:35:02)

I tried "pulseaudio" in the terminal and get the following:
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

No sound except Flash, volume control doesn't work for that.

My sound seems to be cursed. Everything else works fine for me, but in the few years I've been using Arch I've been plagued by constant sound problems. Apparently something in a recent update broke my sound. I get no sound for anything but Flash, except Flash sound is SUPER LOUD, and doesn't adjust with the volume control. Everything else, there's just no sound. Not in VLC, Amarok, Battle for Wesnoth, or other various programs I tried. I tried VLC using the default sound output, the pulse output, and even the ALSA output just for the heck of it. No dice. I was reading in another similar topic that KDE might be the culprit, and indeed I'm using Pulse and KDE. My asound.conf is the default one that comes with the pulseaudio-alsa package. I've tried both gstreamer and xine as backends, they both have the same problem. In pavucontrol, it looks like sound is playing. If I play music or a test sound, the sound bar moves, but you still can't hear anything.
Now here's where it gets weird. Selecting a device within Phonon is screwy. In the output section, the devices listed are as follows. All but the top one are grayed out.
Internal Audio Digital Stereo (IEC958)
Internal Audio Digital Stereo
Dummy Output
Internal Audio Analog Surround 4.1
Internal Audio Analog Surround 4.0
Now, in the audio capture section, the devices are different.
Internal Audio Analog Stereo
NVidia CK804 with ALC655 (NVidia CK804)
NVidia CK804 with ALC655 (NVidia CK804 - MIC ADC)
Pulse Audio
In that list, pulse is greyed out. Are they supposed to be different like that?
In any case... I'm at a bit of a loss. I just can't seem to keep the sound working on this thing. Any ideas?

I think I encountered the sound problem too. I'm using a thinkpad T42, installed gnome, using ALSA. Normally I just enter runlevel 3 into the console, I have ALSA configed and the soundcard is well recognized. But when I play .mp3 using mpg123, everything goes fine but just no sound output (I setted up alsamixer previously, and had all necessary channels unmuted.). That goes several days. And one day, after setting up alsamixer, I also did a alsactl -f /var/lib/alsa/asound.status store, miracle the sound is there. But the day after, the sound disappeared again. Now I'm totally lost, leaving me thinking whether it's a Arch sound bug?
By the way, my system is most updated and upgraded.
Last edited by universalpoe (2011-01-12 01:57:42)

Satellite P10-804: Cannot alter the sound volume control

The Sound Volume Control on the front of the unit has set itself to far in the whole and cannot be altered.
Is this something I can fix ?

I dont know if you can fix it.
Do you have enough experience to disassemble the notebook?
Do you have good experience in soldering?
The volume controller is fixed on the motherboard its not easy to say what happens maybe there are some loose contacts
I think its better to contact a notebook technician because he has more experience as a common notebook user like me and you!

IPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!

I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
I have changed the option under settings for the lock out to mute and back to lock out.
I have reset all setting
I have turned off and on
I have done are hard reset (holding the 2 buttons down).
I have erased everything and started all over reset.
I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?

Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.

Volume control exceeds 100%. Results in bad sound...

Similar Messages

Maybe you are looking for