Volume control keys in Vista

hi All,
my volume control keys (Fn+F3, F4, F5) don't seem to be working. Even though after pressing them the regular speaker image is showing up on the screen, the volume level doesn't change (on that image or on the actual speaker control panel). There's also little white crossed circle on the bottom of the speaker image
Any ideas?

Interesting...
What I notice is that my SigmaTel High Definition Audio CODEC driver is dated as 01/02/2007. I believe it's Windows Update that update the driver, so I rolled back to the previous one (21/06/2006).
After system restart, volume control is working again however there's no sound
So no joy...

Similar Messages

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

How to remap volume control keys on aluminum keyboard?

I want to remap my volume control keys (increase, decrease and mute toggle) to F16, F17, and F18 on my new aluminum keyboard. But I can't figure out how to do this. I called AppleCare tech support and was told that volume key location is hardwired into the keyboard. Say it ain't so! There's got to be a way, right?
Help?
thank you!

I second this, I still think this was a poor decision on Apple's part. I loved real media keys, this is not a laptop keyboard, (Fn)+(..) should not be necessary. My real complaint comes from IF i can get it to remap in OSX i am still stuck with it as is in Bootcamp. No remapping programs work with (Fn) in XP.
Sorry for the rant but I have actually stopped using the keyboard because of this and finally went back to it to try again.

Volume Control Keys Not Working

I got a new MacBook Pro last week and i've noticed that the volume control keys on the keyboard are not working. When I press any of the keys, the grey box that typically appears does show up, but the volume level indicator does not move and there is a small circle underneath with a line through it that shows up every time as well. The only thing that changes is the actual speaker icon, which will change from having a line through it to not having a line through it and vice versa. I've checked the setting for the F# keys, and this is not "checked" in the settings. I'm not sure if this is something I can fix or if it is something I will have to go into the store to have checked out - suggestions?

I cant believe nobody has a fix on this!

Brightness and volume control keys not working with windows 7?

brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?

Welcome to the Apple Support Communities
Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
To install them, follow these steps:
1. Press the X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant and tick only the option to download Windows support software.
3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers

Volume control problems in vista on MBP

Hi,
My Brightness and Backlight keys are working fine but I can't seem to change the volume using my remote or my keyboard volume buttons. The overlay comes up but theres a "no symbol (circle with line through it)" underneath the volume bar. Any ideas how I can fix this? (I can still chnge volume in windows, perhaps its a conflict with the windows driver in SP1)
I'm running a MacBook Pro 2007, and Vista Ultimate 32-bit SP1 (just installed SP1, could have caused the problem).

I am having the same issue. Everything worked fine until the last week or so. I recently installed Vista SP1. Are you running Vista with SP1?

My volume control keys on my keyboard are not working.

All of the keys on my keyboard are working except for the f10, f11, and f12 keys (those which control the volume). I have tried to fix this problem in system preferences but can't seem to find a place to fix the problem. I have a macbook pro.

try a pram reset
Resetting PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Volume control keys not functioning. PC model: s5268hk, with keyboard model: KG-0851

I am using a desktop slimline model: s5268hk, with keyboard model: KG-0851. I don't remember what program I installed that caused the trouble but anyway, right now- it is not functioning like the usual. I re-installed the driver from HP support yet nothing has changed. I appreciate any advice you can provide, thanks to everyone in advance!

You may have to go back to a known good system restore point.
Right mouse click on my Computer, select properties, then advanced system setting then restore. When you get to the restore window, check the box to show all available restore points and pick a date where your know when your PC worked correctly.
If you are using a Norton AV product then turn off "tamper protection" before you attempt a restore or it will fail.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Media key volume control stepper, how to change?

So I just started using kdemod, and I got my multimedia keys working but I'm wondering how to change the volume stepper? Right now it changes the volume by 10% for every step made by my media volume control keys. I would like to have it set to something more sane like 2-3%. Anybody know what I'm talking about or can offer some help? Thanks.

Hi,
"Default value" tab is in Work center. Check for the same in CR02 (Workcenter change view)
In CA02, in Operations Overview, you can change the control key in the routing.
Hope this is clear now..
-Thaila Shree

DV9700 Volume Controls not working after motherboard replacement

I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
Any help would be much appreciated.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

How do I set shortcuts on my new onn wireless keyboard for volume control?

Replacement Keyboard
Volume control issue with a non- Apple Keyboard
[Sunday - July 29, 2012 - 2:18pm]
Question: I just purchased a new keyboard in place of the orginal for my iMac which gave out this morning. The brand name of the keyboard is
ONN & it's a wireless board. I've encountered an issue that is a deal breaker - if there is no possible way to correct it. The volume control buttons used to
increase/decrease/mute the volume do not work on this product. I bough this keyboard because it was one of the two that was Mac compatable at my
local store. I realize you get what you pay for but hope there is a soulution!
**Sidenote: I was curious, anyone had any other issues with these keyboards?
Some additional information:
When I woke up this morning, sat down in my computer chair, turned on my iMac and pulled up Textedit. I placed my hands on my faithful keyboard and within moments I realized that it had met it's end. I was quite upset that my original, sleek white iMac keyboard was now a thng of the past but realized that I'd need a replacement very soon in order to get my paperwork done.
Unfortunately, I did not have time to ride forty-five minutes to my local Apple store and I didn't neccesarily want to hand over the cash for one of the pricey keyboards at the time because I am going on a vacation within the next few weeks and each dime counts. So, I decided to visit a store that obviously would have the cheapeast deals in the meantime. So, I headed to to Wal-Mart to make a quick purchase
As I walked the aisles it soon became evident that today's market still is not on point when it comes to having Apple compatable hardware, softwore or anything for that matter. As I quickly skimmed the keyboards I ran across several that caught my eye, but of course, they were all made specifically for Windows. So, finally I approcahed two keyboards that were Mac compatible. The first was way too large and came with a mouse, which I did not need. The second caught my eye and I knew that this would be my purchase.:::
The verdict: an onn wireless keyboard that was both affordable and also gave off a sleek and modern apperance. (Retailed: $24.00)
So, I got home and began using the board. For the first how I was actuallly very satisfied. I like the buttons and the feel of the board. Then, I encountered a problem that made my interested for the new keyboard vanish.
The Issue: On the boards layout, the (F2) key has a symbol that notates the decrease volume control button, (F3) of course would be the increase volume button & lastly the (F4) button represents the [mute] button.
However, these buttons don't work. Sadly, I am not aware of how I could possibly change this issue or if it would even be possible. I sincerely hope that it's possible - because I like the convience of the volume control keys - they were actually my favorite part of the keyboard. Manually changing the volume by going through system preferences does not sound fun to me once so ever. I guess you could call me spoiled but I don't think I can even keep this board if it doesn't have the ability to change volume/mute via the keyboard.
This is a shame because the keyboard it'self isn't bad at all and I actually somewhat like it. So, if you have any information or an answer to this question - I'd truly appreciate hearing your responses! Also, do keep in mind I am a rookie when it comes to computers as a whole so try to simplicate things for me if that is nessecary.
Closing negative note on this keyboard: As I typed this I started encountering a very annoying problem. As I am typing in a line, forming a sentence the keyboard would randomly start typing in pargraphs above and below as well. I'm not sure if this is something that I caused by pressing too hard with my hands or if this is a deffect. Either way, I will saving my receipt and the boxing for this product until I hear further news.
I hope to hear from you soon and I appreciate your help very much.
Have a great day,
David Travis Center

Safari browser and menu shortcuts:
http://docs.info.apple.com/article.html?artnum=42951
Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
http://docs.info.apple.com/article.html?artnum=75459
and more useful information on keyboard shortcuts here:
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts

Volume control buttons not working with new usb keyboard

Hi all,
I recently replaced the bluetooth keyboard that came with my iMac with the usb keyboard (the long aluminium one, with the number block). Typing is no problem, but the volume control keys dont seem to work with this keyboard as I was used to with the bluetooth keyboard: max vol, increase/decrease and vol. off dont operate with any of the keys (f, alt, str, cmd, shift). Only thing I can do is get a view of the running programs or make the current application vanish from the screen.
Tried to change the keyboard setting in preferences for the F1-12 keys - made no change.
help is very much appreciated.
Thanks

I was able to fix this bug by upgrading to OS X 10.6.8.
Very strange that a) it was a problem in the first place and b) that the upgrade did not happen automatically
Thanks very much to Haggibbor, who alerted me to that possibility. Since I read this in a thread I did not open myself, I unfortunately do not know how to let him have the 10 points I would like him to receive. (Hints for this newbie are very welcome.)
Problem of volume control keys is now solved.

Keyboard Volume Controls working erratically

Hi,
I'm experiencing a strange issue with the mac keyboard volume controls. I have the system set to output both sound and sound effects to some external speakers via the line-out (set in System Prefs). Whenever I reboot my MacPro, the volume control keys stop working with the line-out and revert to controlling the built-in speaker. However, iTunes etc still output via the line-out.
If I try and reset the values in the System preferences, OS X switches the outputs around, but stubbornly leaves the volume keys controlling the internal speaker. If I switch to another User ID, then eveything works fine.
The volume keys had been working fine with the line out and external speakers until this morning...nothing new installed! So i'm puzzled as to why the sudden change! The only thing that was done differently before the shudown was to run the daily/weekly/monthly jobs, but they shouldn't have messed anything up.
I've tried the following 'fixes' which I've found in the forums, but without any permanent success:
1) Check Software Update - all up to date.
2) Reset PRAM - no effect at all.
3) Reset SMC - no effect at all.
4) Hold down power button until power light flashes - no effect at all.
5) Verify permissions - no effect at all.
6) Deleting the ~/Library/preferences/com.apple.BezelServices.plist file then logging out/rebooting. This resolves the issue until I reboot the Mac..then back to square one again. When I check the non-working bezelservices.plist against the one for the working User ID, there is no difference.
Anyone got any ideas on how to resolve this irritating bug - it's almost as bad as having a windows PC back again ?
MacPro 3Ghz Mac OS X (10.4.9)

I've been using SoundSource for a while now because I was having similar problems:
http://www.rogueamoeba.com/freebies/
I often switch between internal speaker, line out and imic depending on the time of day and what I'm listening to/watching.
SoundSource doesn't completely fix the problem but it does make it easier for switching outputs. I've found that if the kb controls get stuck on one output, I just switch the output in SoundSource to something else and then back to the preferred one and everything works again. Only takes a few seconds...

Sound volume control unresponsive after waking from sleep

Lately, a strange problem has developed on my MacBook 13-inch Aluminum (Late 2008), running Mac OS X 10.6.4:
After waking the MacBook from sleep, the sound volume control keys on the keyboard does not affect the volume control of:
* Neither the sound volume output by the built-in speakers,
* nor the sound volume indicator/slider in the menubar,
* nor the sound volume indicator/slider in the Sound preference pane in System Preferences,
Only the sound volume slider/indicator in the Sound preference pane in System Preferences has an effect on the actual volume ouput by the built-in speakers.
First I thought the problem was affected by disconnecting a set of analog headphones while the MacBook was sleeping -- it seemed that after sleep the volume control keys on the keyboard and menubar item still was set to affect the headphone port and not the built-in speakers.
However, the problem just occured after sleeping without anything connected to the MacBook. The built-in speakers were muted, when the MacBook lid was closed, and the computer went to sleep - after waking from sleep the built-in speakers were unmuted - and control was only possible through System Preferences.
Any ideas?

Not sure if you stumbled on the other threads like this one:
http://discussions.apple.com/thread.jspa?messageID=11801555&#11801555
I've been having the same problem on my Mac Pro for a while, finally decided to see if there were some other people having the problem. I'll see if the others have a solution yet.
One workaround I've been doing is to go to Preferences -> Sound and select a different output device. For me, I have to flick to Internal Speakers and then back to Line Out.
Brett

Iphone 4s side volume control not working

Hi,
I own iPhone4s and off late the side volume control keys have stopped responding. I am unable to change the volume using those keys (Option to change the volume using keys under settings tab in on). When I press them a notification flashes on the screen for ringer showing no bars. I miss any calls/messages/alerts due to this. I tried cleaning the charging port as suggested in other posts, but the problem still persists. Sometimes those keys start working automatically and at other times, they don't. It seems more of a software problem since I am able to click photos using those buttons. Please help.

Hello KookieMonsta187,
Thanks for the question. After reviewing your post, it sounds like there is a problem with the headset. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If your headset isn't working - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Volume control keys in Vista

Similar Messages

Maybe you are looking for