Volume control missing in the tray

new to Window 7 and HP and apparently I removed it?? Need to get it back Help me please.
Thanks in advance.

Hi 333Help,
Welcome to the HP Forum!
Try this:
Control Panel > icon view > Notification Area Icons >
CHECK "Always show all icons and notifications on the taskbar"
OK
If you want to adjust the settings for some of the Icon Notifications individually:
UNCHECK the setting > go into the Window where the settings are located and select how you want each of the Items to respond... Once you have everything the way you like it, go back...
CHECK "Always show all icons...."
OK
I hope this helps!
Good Luck!
                     When you appreciate the Help you receive…
       Please Click the Kudos Star on the Left to say "Thank You"!
    Is it Solved? Make it easier for other people to find the Answer: 
       Please Mark my Post “Accept as Solution” to say "Yes!"
 Remember:  The more information you provide, the better help you receive.
Always Include:  (Computer) Product Number  ,  Printer – Model Number ,
                        Operating System and an Error Description
                             Never give out your Serial Number
                                 2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Similar Messages

  • Volume control missing in taskbar

    I have a HP G60-235DX laptop. I have noticed that the volume control in the bottom right taskbar is missing. When I right click on the taskbar>properties>notification area, Windows will not allow me to click on volume control. When I go to control panel>sound, I cannot click on default, apply, properties or configure. I can control the volume control with the function & sound keys assocaited wit hthe side number keypad. If anyone knows how to restore this, it would be greatly appreciated. Thank you.
    George
    UPDATE:   After exhausting all options, I turned the laptop off, then back on & the volume control reappeared in the lower right taskbar & all other volume controls are now working properly as usual. Thank you.

    Hi 333Help,
    Welcome to the HP Forum!
    Try this:
    Control Panel > icon view > Notification Area Icons >
    CHECK "Always show all icons and notifications on the taskbar"
    OK
    If you want to adjust the settings for some of the Icon Notifications individually:
    UNCHECK the setting > go into the Window where the settings are located and select how you want each of the Items to respond... Once you have everything the way you like it, go back...
    CHECK "Always show all icons...."
    OK
    I hope this helps!
    Good Luck!
                         When you appreciate the Help you receive…
           Please Click the Kudos Star on the Left to say "Thank You"!
        Is it Solved? Make it easier for other people to find the Answer: 
           Please Mark my Post “Accept as Solution” to say "Yes!"
     Remember:  The more information you provide, the better help you receive.
    Always Include:  (Computer) Product Number  ,  Printer – Model Number ,
                            Operating System and an Error Description
                                 Never give out your Serial Number
                                     2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • TS3274 The volume control stays on the screen

    The volume control stays on the screen.

    If the volume is working properly meaning if you do have sound and you can adjust the volume up and down, try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT1567 I have the volume control symbol in the center of my iPad all of the time.  My music will not play and the volume remains off.  When I try to increase the volume manually it statics and will not maintain a volume level.  Thanks

    I have the volume control symbol in the enter of my iPad all of the time.  My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level.  Thanks

    Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

  • [SOLVED] GNOME Shell 3.4 : Volume Control Missing

    Hi all, I have an Acer netbook with Arch Linux i686. I installed GNOME-Shell 3.4, but there is no volume control applet. When playing music, i can't control the volume. Can you help me?
    (Sorry for my bad English)
    Last edited by masnormen (2012-06-05 04:44:14)

    Thanks, the problem is solved now. Volume Applet shown after update.

  • TS3274 Ipad in headphones mode no volume controls after removing the earphones

    iPad on earphones mode , even if I remove the earphones no volume controls

    Hi Vizopedzi,
    This article, although it lists iPhone as the affected product, is largely applicable to the issue with your iPad as well:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    I hope this helps!
    - Ari

  • No audio MISSING AUDIO MIXER - SM BUS CONTROLLER - VOLUME CONTROL

    Working fine until the end of April (15) - tried reinstalling windows xp (repair) - installed the required audio devices / drivers.
    Realtek ALC888 (integrated) on board with Nvidia 6150 LE graphics.  AMD K8 Processor Athion 64 X2 Dual Core 3800+
    ASUS A8M2N-LA NODUSM3 GL8E Motherboard WINDOWS XP PRO
    Can'f find chipsets anywhere online - contacted HP - MICROSOFT - ASUS - AMD no one willing to help.
    Device Manager doesn't show at all - no device - no yellow ! - no red x - absolutely nothing for the following:
    SM BUS CONTROLLER
    When trying to update driver states MUST select and INSTALL via the DEVICE MANAGER - Only problem is - it is NOT LISTED ANYWHERE in the device manager tree.
    Install RealTEK drivers  - RESULT - Limited Audio from RealTEK HD Audio Manager - Can hear TEST  Audio I/O  default Sample thru headset.
    THERE IS NO - 
    Volume Control either in the MENU >> Programs >> Accessories >> Entertainment ( NOTHING !!) No program. no icon. no options. It is also MISSING from the SYSTEM (taskbar) Tray (lower right of desktop)
    If I use Audacity and MANUALLY load a WAV or MP3 file - I get audio 
    DXDiag claims DIRECTSOUND is missing driver
    Adobe SoundBooth CS4 also will manually retrieve and PLAY WAV - MP3 - OGG - AU files ( I can hear thru headphones (rear panel))
    Any video including off and online will work just fine - if any audio, cannot hear it.
    The system has been flawless for a number of years - it is just within the last two weeks, it has NOT worked regarding audio - GRAPHICS, GRAPHIC SOFTWARE, VIDEO PLAYBACK all work.
    Go to CONTROL PANEL >> Sounds and Audio Devices  - EVERYTHING is greyed out - NO Playback Device, No Audio Device, No Speaker settings or Device Volume Controls - just a panel showing nothing is connected or selectable.
    CLICK HARDWARE TAB - SELECT - Choose any device (Audio) and states the device is working properly and is enabled.
    On BOOT - Windows Audio Service is STARTED, set to AUTOMATIC
    Bootlog shows  WA Service Started, but individual Audio Device Drivers DO NOT LOAD!
    Device Manager SHOWS NO WARNINGS - of broken or disabled drivers anywhere (looks normal at a glance)
    Have run out of ideas to try and fix the problem. ANYONE have any kind of NEW ideas - beyond uninstalling / reinstalling drivers? (Have done that no fewer than 50 - 75 times!).
    Thanks for any advice, beyond suggesting getting a new machine - There are practical reasons for not wanting to - based on work related XP specific proprietary installed software (Engineering-applications).
    Thanks in advance for any insights, advice, work-arounds, solutions that work.
    FX Designer

    Hi:
    This would be the chipset driver you need...
    http://www.nvidia.com/download/driverResults.aspx/​9701/en-us
    After you install the chipset driver and reboot, try the audio driver directly from Realtek.
    Accept the agreement.  DL and install the first driver listed in green.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT​...

  • Why doesn't the volume control settings allow a greater range (on the low end)?

    Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough.  My phone is often louder than I want in my headphones even at the lowest setting.  I find myself trying to lower the volume but ending up in silence.  After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation.  It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
    The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range).  I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
    Why hasn't apple expanded the lower volume limits?  There has to be a way, or is this not possible?  Can anybody think of a way to fix this problem?

    Meg St._Clair wrote:
    Look for headsets with a volume control.
    I did exactly this for awhile.  I used to have Skullcandy Asyms with the inline volume attenuator (wheel).  They've since discontinued them, and my 5 pairs are having wire connectivity issues.  All their current models have iphone like volume mechanisms.  The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments).  I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
    I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
    Does anyone else have this problem of the iPhone being too loud in semi-quiet environments?

  • How do I get the Play, Stop, Volume controls to appear in my embedded Flash object?

    Hello,
    I want to show .swf or .flv videos on my website--like
    youtube.com. I want to use the standard Flash Player object
    embedded in a web page, however, I cannot seem to find the exact
    params that make the standard controls appear (ie, Play, Stop,
    Pause, Volume, etc). I just want to show a video and have the Play,
    Stop, Pause, Volume controls visible at the bottom. What do I need
    to do to get these controls to appear?
    Here's my current code:
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
    width="800" height="600">
    <param name="movie" value="
    http://www.sitename.com/flash/dt_flash.swf">
    <param name="quality" value="high">
    <embed src="
    http://www.sitename.com/flash/dt_flash.swf"
    quality="high" pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    type="application/x-shockwave-flash" width="800"
    height="600"></embed>
    </object>
    Any help would be greatly appreciated! :)
    Jason

    Sorry!  It's AS3. A typo on my part but, thanks for answering the post.   This is the correct answer that worked for me. Also,  the answer came from Kglad in the AS3 forum
    Assign your component an instance name (if it doesn't already have one), eg flv and in the frame that contains that component add:
    flv.addEventListener(Event.REMOVED_FROM_STAGE,removedF);
    function removedF(e:Event):void{
    flv.stop();

  • How to restore the volume control while playing music in iTunes

    How do I recover the volume control (slider at the bottom of the screen) in iTunes when playing music? After I plugged the device into an iHome speaker, the volume control dissappeared.

    generdude,
    Not that I know of, but you can turn it off completely by going to System Preferences...>Sound>Sound Effects>Alert volume: (Uncheck) Play feedback when volume is changed.
    ;~)

  • THE VOLUME CONTROL ICON DISAPPEARE​D. HOW DO I GET IT BACK?

    Volume control icon at the bottom of my screen has disappeared.  How do I get it back?

    Volume control icon at the bottom of my screen has disappeared.  How do I get it back?

  • Where has the volume control gone

    Where has the volume control gone

    THIS IS THE FIX TO PUT THE VOLUME CONTROL BACK AT THE TOP!!!!!!
    Carolyn SamitOct 17, 2014 1:35 PM Re: Where has the volume control moved to?
    Re: Where has the volume control moved to?in response to mattzilla303
    Hi ..
    Open System Preferences > Sound then select any tab then click:  Show volume in menu bar

  • Why did i get a different headphone from the one in the pic? It has no volume control button.

    I am really dissapointed with my order. I bought an apple headphone with remote and mic online, and i received a headphone that doesnt look and function the same as the one advertised. It has no volume control button with the + and - signs. This is the second pairs i bought the headphone and this one definitely looks different from the pairs i had previously. I hope someone can clarify this thing, and it's really troublesome if i wanted to return the headphone.

    Are you sure you ordered the earphones WITH remote and volume control? Look at your bill; does it say something like "with remote and mic"? I think you should contact Apple Store for their assistance. Perhaps they really made a mistake and shipped you some old stock item. I agree, shipping and reshipping takes time and is troublesome. Hope you'll find a solution though. 

  • IPhone 3GS - volume controls working but actual volume stays the same

    Hi
    My iPhone 3GS has been exhibiting a strange phenomenon for the last couple of days. The volume in my heaphones is fixed. I can use the volume control buttons or the on screen slider just fine, they're responsive in terms of animation (the buttons show the increasing/decreasing number of white squares and the slider allows me to move the dot and the blue line extends accordingly), but the actual volume only changes when I'm using the speaker, but not when I'm using the headphones. The only actual volume control I have using the headphones is sliding the volume down to zero, which also produces a loud click in the headphones.
    The issue is system-wide and as such affects all apps, including Spotify, iPod, VLC, various games and other music/video apps.
    The headphones in question are brand new and work fine with other equipment. I've also tried with other headphones, with no change.
    Any help would be appreciated. And yes, I've restarted the phone. I've contemplated reset/restore, but I wanted to check if anyone knows of a less time-consuming solution.
    Thanks

    No, that's not it.
    The volume is not locked using the Volume limit, and even if it were, that wouldn't explain why it's fixed at one (rather loud) level. The volume limit function is just there to limit the upper bounds, not set it to a constant level.
    Thanks for your reply, though!

  • Keyboard Volume control drivers...where are they on the machine?

    HPE-470f.  Running 64 Bit Windows Professional.  I have lost the volume control keys on the keyboard.  I understand they need the driver file KBD.EXE.  I don't have it on the machine.  I have tried the HP restore and the keyboard driver is not listed for restore. When I go to the self download support site for this machine the file is not listed in the original files list presented for download.  How do a get a copy?
    TIA  Paul

    Shift 2    @ 
    Shift 3    #

Maybe you are looking for