Volume control not showing

In Flash CS3 I am creating an SWF for a live stream. I have
added a player control bar ( Play, pause, volume control etc) but
when I publish the SWF it does not show up. I want to be able to
mute my Flash player.
Thanks for any help.

I assume the switch on the side of the phone is in the proper position. In settings/sound make sure the slider is at max. Turn on Change with buttons in settings/sound. In settings/music make sure you have volume limit turned off or if it is on check to see hwat limit you have set so it is not too low

Similar Messages

I am trying to play music and videos but the volume will not show on the screen unless i have head phones in also the buttons on the side will not change my ringtone volume

i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons

its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

When using Windows, mac volume does not show

I recently clean installed both Lion and Win 7 with bootcamp.
Windows volume shows normally when I am using mac,
however mac volume does not show any more under windows.
Any help would be appreciated!
Thanks

and I have bootcamp version 4.0 which i believe is the latest version

Volume control not working after I plug in speakers or headphones

When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

Make an appointment at the Genius bar at the Apple store.
Ciao.

DV9700 Volume Controls not working after motherboard replacement

I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
Any help would be much appreciated.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Volume control not working when speakers/headphones plugged in.

When my external speakers or headphones are plugged into the back of my iMac, the volume control won't work. A "no sound" icon appears and the volume slider will not move. When I unplug speakers or headphones everything goes back to normal. All updates are current. My "Audio MIDI Setup" says, "Audio Output....Output Not Supported." Repairing disc permissions was run too. Any ideas?

Hi Paul
*First off:*
Open System Preferences > Sound and select the Output tab. Now plug in your external speakers or headphones, do you see the Device Name change from Internal Speakers to Headphones?
*If nothing:*
Then try another Account, preferably your Admin. Account if your logged into another.
*Still nothing:*
Check the settings in other third party Audio programs you may have installed?
*If still nothing:*
Reset the SMC > http://support.apple.com/kb/HT3964
+(as per the instructions at the bottom of the article)+
and
Zap the Pram > http://support.apple.com/kb/HT1379
*Then if you still get nothing:*
Take it in for service and have it checked for a hardware problem.
Dennis

Belle to Play 360 volume control not in sync

When I connect my 808, N8 or C6-01 (all running Belle) to a Play 360 speaker have noticed an inconsistency in the volume control function.
Firstly let me make this easier to explain by pretending that the Belle devices all have 10 volume levels and the Play 360 speaker has 10 volume levels.
Secondly I will explain how I expect the volume controls to work and indeed how it does work on my N95 and N97 (yes I've been very thorough with my testing!):
When I set my phone (N95 or N97) volume to any number from 1 to 10 the speaker plays at exactly that volume level. If I increase or decrease the volume level on my phone (N95 or N97) then the volume level on the Play 360 speaker increases or decreses to match the phone's level.
Great so far
This bit is also great...
When I adjust the volume level using the +/- buttons on the Play 360 speaker the phone (N95 or N97) volume level adjusts to match the change. So, no matter how I change the volume the phone and speaker are always in sync, e.g. 1=1, 2=2, 5=5, 10=10.
Now we're getting to the problem...
On my Belle devices, 808, N8 and C6-01 the volume levels only sync with the Play 360 when music is not playing. As soon as I play music the levels become independant of one another.
For example: While the music is paused I can press the - button on the Play 360 to reduce the volume to level 1. I also do the same on my 808. So now both devices are at level 1. Remember, the music is currently paused. If I increase the volume on the Play 360 I see on the 808 screen that the volume increases there too. Same for decreasing volume too, both stay in sync as long as music is paused.
However, when I start the music playing and press +/- on the Play 360, although the ambient volume changes accordingly, the phone volume level remains the same. This means that even after I've got the Play 360 at max volume, I can then increase it further by using the volume control on the 808.
What you end up with is 10 levels of volume on the Belle phone and ten levels of volume on the Play 360. As long as no music is playing they adjust together. When music plays they adjust independantly.
Wow this is hard to explain. I think I'll do a video.

Here's the video: http://www.youtube.com/watch?v=cQ_3jdKaC_0

Skin Control not showing

Hi, I'm using Flash 8, producing and swf file and inserting
on the website. Seems to play just fine but I can't see the
transparent control over the movie. Tried right clicking and it
does not appear. Is is just not finding the skin. I am rendering it
with the skin from an avi file. It shows up in Flash just perfectly
but does not show on the website. The skin and swf file are located
in the same sub. The file is on the index page. I'm using front
page to insert the movie

Hi Gurus,
I tryied manually and i found that
1) in table control when i edit,delete or modify value then impact on ztable is Below table.
                 Budget No    Sales dist       Material           Budgeted Units
   A :-   01    001747       430203           S0116649                    1,382
   B :-   01    004267       430203           S0116649                    1,050
   C :-   01    004280       430203           S0116649                        0
Line A is my first record
Line B when i modify again new entry is going to create with New budget No
Line C when i delete data from table control again it create new entry with diff budget No and Budetget Units set to zero.
why each time new entry going to create ?

Volume control not working , which database controls volume?

I have read this solution elsehwhere, but I came to the blackberry forums to see if you guys can help me up with this question.
[quote]
Originally Posted by ArtSmart
I had the same failure. You can verify that the button has physically failed by going under Options / Screen/Keyboard / Key Tone On / Save. Now you can hear every other button, even the volume down button, but not the broken volume up button.
Here was my workaround to get the media player volume back up to 50% (not 100%, but it's a heck of a lot better than zero):
1. Launch desktop manager
2. Synchronize with Outlook
3. Backup everything to a new database (not really needed, but just a precaution)
4. Restore old database (before volume got stuck at 0%)
5. Change synchronization conflict resolution options so that Outlook wins
6. Synchronize with Outlook
7. Change synchronization conflict resolution option back to "ask me what to do"
Voila. Now my media player volume is back to 50%, which is where it was when I did the last backup before accidentally ratcheting it down to 0%.
Whenever I restore a database, it always loses my Internet Browser. To get it back, go under Options / Advanced Options / Host Routing Table / Menu Key / Register Now / Ok. Unfortunately, I'm back to all the old bookmarks as they were in the old database, but I can always re-do those changes.
[quote]
Okay I Could restore an old database where the volume was at 50%, but the Desktop Media Manager also has an option to restore specific options that were previously backed up .
SO my question is, does anyone know what specific database controls the volume control? SO I won't have to do a FULL Database restore?
Thank You :smile:

Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Volume control not visible

How do you get the volume control to reappear after is no longer appears in the bottom of the screen,

If your running Windows 7, the steps are shown below:
Enable Windows 7’s Volume Icon
Right-click an empty space on the taskbar (the bar with the Start Orb and clock) and then click Properties.
Click the Customizebutton in the Notification area section of the Taskbar and Start Menu Properties window.
Click Turn system icons on or offat the bottom left of the Notification Area Icons window.
Set the Volume icon’s behavior to On and then click OKto save the changes.
Although I am an HP employee, I am speaking for myself and not for HP.
I am also CompTIA A+, Network+ and Security+ Certified
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Sennheiser headphones inline volume control not working

When using my Sennheiser in-ear headphones the volume control on the lanyard does not alter the volume on my iTouch 64Gb - why?

Hi Paul
*First off:*
Open System Preferences > Sound and select the Output tab. Now plug in your external speakers or headphones, do you see the Device Name change from Internal Speakers to Headphones?
*If nothing:*
Then try another Account, preferably your Admin. Account if your logged into another.
*Still nothing:*
Check the settings in other third party Audio programs you may have installed?
*If still nothing:*
Reset the SMC > http://support.apple.com/kb/HT3964
+(as per the instructions at the bottom of the article)+
and
Zap the Pram > http://support.apple.com/kb/HT1379
*Then if you still get nothing:*
Take it in for service and have it checked for a hardware problem.
Dennis

My ipad2 media volume not working, volume bar not showing

My ipad2 media volume not working, volume bar not showing

here are my similar symptons:
in Settings the volume slider bar when moved plays a sound out of the speaker
when you double press home button, and slide over to the brightness and volume slider bars, the volume slider is completely gone.
when you plug in headphones it works fine, volume rocker controls volume perfectly.
when you press volume rocker without headphones, nothing happens, or a blank "sound effects" icon displays.
I sent my Ipad2 to Apple for this under warranty. They said there are some small scratches on the side of it.
It lives in a heavy duty case, but the exposed area has been knicked some how. The little divots in the metal on the side mean that "impact" must have broken it.
Forget the fact that it spontaneously started happening and that the speakers and headphones both work at various times, and the volume rocker works, but iOS 5.1.1 apps can't send sound out the speaker, but the volume settings in the sound do send out sound..
so they refused to look at it or repair it under the warranty. I was a day away from buying yet another apply device in our family that already has a couple iPod Touches and 2 iPads. I think I'll buy a droid now.

Flash Controls Not Showing On Web Page

Hi-
Been beating my head lately using Flash Pro 8 and DW 8.02.
Here is the latest difficulty:
Created a Flash video file in Premiere Elements 4
Imported the .flv Flash video file into Flash 8 using import
video
Added an external skin to the video
Saved Flash .fla file
Exported movie in .swf format
I can open the .swf file in Flash Player 8 and it works fine.
I can also use the Publish setting in Flash to export the necessary
files as well as the HTML file. When viewed in either Firefox or IE
it plays correctly and the player controls are present. However, if
I create a new page in DW8 and then Insert > Media > Flash,
point it to the .swf file and then view it in Firefox or IE I can
only see the .flv Flash video file and none of the controls/skin
that should be there. I know the controls/skin are actually present
because I can browse directly to the .swf file and it displays
works properly. I can also use the publish settings from Flash to
create the HTML page and it works correctly as well. It is only
when the page is generated by DW8 that I get this problem. I have
looked at the code created by DW8 and cannot find any reference to
the .swf file for the movie controls/skin. Any idea why DW8 would
only be placing the Flash video .flv file on the page and not
writing the code to place the entire Flash movie .swf on the page?
I have tried restarting/rebooting, created a new "clean" test page
with only the Flash movie on it and it is always the same. The
other thing that is weird is I did not select Autoplay or Loop in
the DW8 settings nor in Flash 8, yet when I preview the page
created by DW8 in a browser, piece of the Flash movie I can see
(the Flash video part) autoplays and loops!
Again, any help is appreciated.
-=SB

Update- This is what I have discovered while playing around
with the page and Flash file:
If I create the .swf files for the movie and skin and then
save them to the same directory as the .Flash video file and then
view the .swf file everything works fine.
If I then create a web page using DW8 and insert the Flash
into the page and save the web page to the exact same directory as
all the other files and then view the web page in a browser, it
works fine. However, if I create a new web page in DW8, save it to
any other directory other than the one where the .swf and .flv
files are located and then view the page in a browser only the .flv
Flash video portion of the movie will display in the browser--the
controls are missing. However, if I browse directly to the .swf
file and avoid going through the DW8 generated web page the Flash
movie displays properly with the controls in the correct location.
My question then is why will DW8 not show the Flash movie with
controls if the page is located in higher level directory than the
.swf and .flv files and yet browsing directly to the .swf file with
my browser works just fine? I have checked the path to the .swf
file in the DW8 source code and it is pointing to the correct
directory location. This is so strange--why will it display one way
and not the other? Any ideas?

Adobe Reader Control not showing in COM tab of Toolbox Items in Visual Studio

This is my first experience to work on C# and Visual Studio. I have a task to show PDF document on a window form. After reading tutorials and following some examples I have decided to add the 'Adobe Reader Control' in my toolbox and use that control on my form. The problem is that I cannot able to add that control on my toolbox because "it is not showing in COM tab of toolbox items. To clarify just see the red lined component in image that is NOT showing on my component list".
I have Adobe Reader 11 installed on my machine.
I am using Visual Studio 2005.
I am using Windows 7 64-bit OS.
In my project I have changed the architecture from 'Any CPU' to 'x86'
Any ideas what can be the issue, why it is not coming on the list?
This is my first post on this forum. Do point me out if i miss any forum guidelines.

I have the same problem! I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
Does registering unlock something?
Help please!!

Volume control not showing

Similar Messages

Maybe you are looking for