Volume control on the transfer tag

Hello,
Is there a way to increase the volume of a phone call when using the <transfer> tag in VXML? I am using a 1760 router to make the transfer. Any help will be appreciated! Thanks!

Dear atlantisonetech
for increase your volume you must change the Cisco Router 1760 config .
at your voice port config change the 'input gain 'number .
Foad Godarzy (IT Manager)

Similar Messages

My kid dropped my iPad 2 and the volume control on the side got jammed in and now everytime my ipad is on the volume icon in the middle of the screen will not go away. I can not move the switch on the side, it is jammed, is there a way to fix it?

My kids dropped my iPad and the volume control on the side got jammed in and it will not move, how can I fix this? Can it be pulled out to unstuck it. The glass got chipped right next to it, but it is not that noticible. Everything else works on the iPad, but the other problem is that I am past my 90 day warrenty and it will cost me $265.00 to have Apple fix it. Is there anyway I can save my iPad?

Your warranty is actually one year - the 90-days is only for free telephone support - but the warranty would not cover damage due to the iPad being dropped. I doubt there's anything you can do to fix the rocker, so you'll probably need to pay to get the iPad exchanged (by Apple) or repaired (by a third party repair service).
Regards.

Where is the volume control in the new Remote 3.0 app?

I'm unable to find the volume control in the new Remote 3.0 app.

i have the same remote 3.0 but now i am even able to control the volume from the app....
is the app connecting to your itunes?
what version of iTunes do you have?
do you have a pc or a mac? what version?
i assume you downloaded the apple remote app, just in case, not a 3rd party's....
did you try deleting and redownloading the app?

Why does using a digital connection from headphones out on a Mac into a stereo disable the master volume control on the Mac?

When you use an analog connector, it does not disable the master volume on the Mac. It's only when you use a digital connector, and it's ALL digital connectors. It still allows you to use the iTunes volume control but, when you stream anything else on the web on your computer, you have to use the stereo's volume control because the master volume control on the Mac has been disabled. Does anyone know why?

I had the same problem, instead of logging in the router with the iMac (impossible) I did it with my iPad, I guess you can do the same with an iPhone.
-Disconnect the iPad from your wifi network and connect it to the TP-Link repeater.
-Open the web browser (I use chrome) be sure you don't have any other open tab, just the one to access tptlinkextender.net
-The configuring page opens, from there follow the steps of detecting your network and adding the password.
*If your MAC address is hidden it'll appear without name, in that case you have to configure it manually (write the name on the space for that)
Now go, be happy and do good.

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

Can't find a Volume control in the Youtube App

Just coming up to speed on the xoom.
Can't seem to find the volume control on the YouTube app??

You control the volume with the volume buttons on the Xoom (I'm assuming it has them, right?) while in the app. You should also be able to go into the main settings menu and find the sound settings. In there you can control the various sound settings for the device, with the media volume being what the You Tube app uses. Now, this is based off of android for phones, but I would imagine the Xoom isn't too much different.

[Mobile] Put back the Volume Control in the Now Playing View

I have just updated to the newest mobile app (3.3.0) on my iPhone and now there is no volume control on the 'Now Playing' screen (same for Android).
I used to use this because when I go from my car to my head phones I need to turn down the volume a lot! And if I use the iPhones volume buttons, it says its changing my headphones volume but its just turning down my ringer volume (very annoying). Please put the volume control back.

Updated: 2015-06-19Marked as new idea and edited the title slightly to make it easier to find via search. ;)

Where is the remote volume control in the new ITUNES - I cant adjust my volume control remotely on my Zepplin Air anymore

Hi I have downloaded the new itunes 12.01 - since then I have had nothing but trouble with my Zepplin Air. Now I cant remotely change the volume control on it, only being able to change it on my connect

I did try that too (was already turned on). It seems like this is a big step backwards, since even if control center worked in YouTube, it requires stopping the video, opening the control center, closing it, and restarting the video. Very counterproductive to simply restoring a volume slider on the basic You Tube controller, next to the timeline slider. Again, I appreciate the help. For now, I can use the buttons on the side of the iPad (not as convenient), and hope a newer version of You Tube will restore volume controls that work in next upgrade.

I don't understand how to use the volume control on the new iphone headphones

I just bought the new style earphones for my iphone and it has a new volume control -- how does it work? On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down? Does anyone know how to use this properly?

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

Adjust Quicktime Volume Control when the application starts

3Apr07
I have a problem streaming program. Microsoft stopped supporting Widows Media Player for the Mac.
Micosoft has a application FLIP4MAC-MWV which will either open a window in Safari or has the option of opening a window in Quicktime.
My problem is: The volume level in Quicktime is too high when the stream begins. I use Wiretap Pro to record radio streams while I am at work. The default high volume distorts the recording.
I have tried and tried again to change the default volume level to a middle level, but the stream starts at max volume. How do I change that?
I also have the same problem with the Safari window level.
Can anyone tell me how to adjust the default volume in Quicktime and Safari?
Thank you for reading this post and greater thanks for any recommendations.
Regards,
Craig H. Henden

14Apr07
Thank you for you help. I actually don't use Quicktime-formated files or steams. I used to use Windows Media Player until the Wiretap Pro custormer support recommended I use Flip4Mac WMV to convert Media Player streams to Quicktime compatible. However, the volume is too high.
I did try adjusting the Midi Sound controller. It did not have the effect when Quicktime starts-up.
Most of the time I record using Windows Media Player or Flip4Mac, I am not home to adjust the volume.
I will try adjusting the Midi control again. I wish Flip4Mac converted Media Player formated streams to Itunes. Wiretap pro works very well with itunes.
Regards,
Craig H. Henden

Automating volume control of the groups of a EXS24 instrument

Can I automate the volume levels of different groups of an EXS24 instrument?
Or can I assign a controller to the volume of an instrument group so I can automate this controller?
Thanks Werner
G5 Quad Core Mac OS X (10.4.3)

If you use the multichannel version of EXS24 you can assign groups to different outputs (auxes) and automate the corresponding tracks.

Volume Control on the Nokia 6101

How do you ajust the volume on the Nokia 6101.

By pressing the arrows right or left when you have an active call.
The views I present are my OWN and not of any organisation I may belong too.

Why doesn't the volume control settings allow a greater range (on the low end)?

Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough. My phone is often louder than I want in my headphones even at the lowest setting. I find myself trying to lower the volume but ending up in silence. After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation. It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range). I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
Why hasn't apple expanded the lower volume limits? There has to be a way, or is this not possible? Can anybody think of a way to fix this problem?

Meg St._Clair wrote:
Look for headsets with a volume control.
I did exactly this for awhile. I used to have Skullcandy Asyms with the inline volume attenuator (wheel). They've since discontinued them, and my 5 pairs are having wire connectivity issues. All their current models have iphone like volume mechanisms. The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments). I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
Does anyone else have this problem of the iPhone being too loud in semi-quiet environments?

Can'y see the volume control in my display?

Can someone help me?
My stupid friend "played" with my Ipod Nano settings and now has both the volume control and the time remaining of the song disappered...changed into a lot of dots?!?!?
How do I get volume control back??

The Dots are the Rating screen. Press the center button a few times.

Satellite P10-804: Cannot alter the sound volume control

The Sound Volume Control on the front of the unit has set itself to far in the whole and cannot be altered.
Is this something I can fix ?

I dont know if you can fix it.
Do you have enough experience to disassemble the notebook?
Do you have good experience in soldering?
The volume controller is fixed on the motherboard its not easy to say what happens maybe there are some loose contacts
I think its better to contact a notebook technician because he has more experience as a common notebook user like me and you!

Volume control on the transfer tag

Similar Messages

Maybe you are looking for